- **Complete ZigBee Development Kit:** Includes five WZB-D03 ZigBee modules and one USB ZigBee dongle, enabling immediate setup of a functional ZigBee network. - **IEEE 802.15.4 Compliant:** Fully compliant with the ZigBee protocol stack and IEEE 802.15.4 standard for low-power, low-data-rate wireless communication. - **Plug-and-Play USB Dongle:** The included USB dongle acts as a ZigBee coordinator or gateway, allowing direct connection to a PC or embedded host for network control and data monitoring. - **Multi-Node Network Simulation:** Supports creation of star, tree, or mesh network topologies for testing routing, signal strength, and node communication. - **Low Power Consumption:** Optimized for battery-powered applications, with efficient sleep modes and minimal idle current draw. - **Flexible Configuration:** Each WZB-D03 module can be configured as a coordinator, router, or end device, providing flexibility for various network architectures. - **Extended Range and Reliability:** High-sensitivity RF transceiver ensures stable communication over extended distances, suitable for both indoor and outdoor environments. - **Developer-Friendly Interface:** Supports serial communication (UART) and standard AT command sets for easy integration with microcontrollers and PCs. - **Firmware Upgradable:** Modules support firmware updates via serial interface, ensuring compatibility with evolving ZigBee standards and custom firmware development. - **Compact and Modular Design:** Small form factor modules facilitate integration into prototypes, test rigs, and embedded systems.

Manufacturer: NHR Nietzsche Enterprise

Category: ZigBee Modules

- **ZigBee Coordinator Functionality:** Acts as the primary control node in a ZigBee network, responsible for network creation, device association, and routing management. - **IEEE 802.15.4 Compliant:** Fully compliant with the IEEE 802.15.4 standard for low-rate wireless personal area networks (LR-WPANs). - **2.4 GHz ISM Band Operation:** Operates in the globally available 2.4 GHz frequency band, supporting 16 channels (11–26) for flexible deployment. - **Mesh Networking Support:** Enables self-healing, scalable mesh networks with dynamic routing and automatic reconfiguration. - **Low Power Consumption:** Optimized for energy-efficient operation, suitable for battery-powered or low-power embedded systems. - **Compact Form Factor:** Designed without housing for direct PCB integration or custom enclosure design. - **High Data Reliability:** Incorporates error detection, acknowledgment, and retransmission mechanisms for robust data communication. - **UART/Serial Interface:** Provides a standard UART interface for communication with host controllers, gateways, or PCs. - **Firmware Upgradeable:** Supports firmware updates for feature enhancements and security improvements. - **Wide Application Range:** Suitable for smart home automation, industrial monitoring, building management, and IoT gateway systems.

Manufacturer: NHR Nietzsche Enterprise

Category: ZigBee Modules

- **ZigBee Wireless Communication:** Fully compliant with the IEEE 802.15.4 standard, supporting ZigBee protocol stack for robust, low-power mesh networking. - **End Device Functionality:** Operates as a ZigBee end node, designed to communicate with ZigBee coordinators or routers within a network. - **Compact Form Factor:** Small PCB module without housing, ideal for integration into space-constrained devices. - **Low Power Consumption:** Optimized for battery-powered or energy-efficient applications, supporting sleep modes and low-duty-cycle operation. - **Reliable Wireless Connectivity:** Provides stable and interference-resistant communication in the 2.4 GHz ISM band. - **Flexible Integration:** Designed for OEM and system integrators; can be embedded into sensors, controllers, or gateways. - **High Data Integrity:** Supports secure data transmission with ZigBee network encryption and authentication mechanisms. - **Scalable Network Support:** Compatible with ZigBee mesh networks, enabling large-scale deployments with multiple nodes. - **Industrial-Grade Design:** Built for durability and consistent performance in industrial, commercial, and residential environments. - **No Housing Design:** Facilitates direct PCB mounting or integration into custom enclosures, offering design flexibility.

Manufacturer: NHR Nietzsche Enterprise

Category: ZigBee Modules

- **Compact and Lightweight Design:** The WZB-SGB02 features a small form factor (34 × 23 × 10 mm) and weighs only 14.6 grams, making it ideal for discreet installation on windows, glass doors, or other glass surfaces. - **Battery-Powered Operation:** Powered by a **CR2032 lithium button battery**, the detector offers **over one year of battery life** under typical operating conditions, ensuring long-term, maintenance-free performance. - **Energy-Efficient Performance:** With a **standby current of only 1.4 µA** and a **transmission current of 35 mA**, the device is optimized for low power consumption, extending operational life and reducing maintenance frequency. - **ZigBee Wireless Connectivity:** Fully compliant with **IEEE 802.15.4 ZigBee 2007/PRO HA Profile**, the detector communicates seamlessly with ZigBee routers, coordinators, and hubs, supporting **Star, Tree, and Mesh network topologies**. - **High Sensitivity and Reliable Detection:** The WZB-SGB02 features a **receiver sensitivity of -92 dBm** and a **transmission power of 0 dBm**, ensuring stable communication and reliable signal transmission up to **100 meters in open areas**. - **Auto Reconnection and Recovery:** The device supports **automatic reconnection** to the ZigBee network after temporary disconnection, ensuring continuous operation and minimal downtime. - **Easy Installation:** The detector can be mounted using **industrial adhesive** (silicone recommended), eliminating the need for complex wiring or drilling. - **HA Profile Compliant:** Designed for seamless integration with ZigBee Home Automation systems, ensuring interoperability with a wide range of ZigBee-certified devices. - **Surge Protection:** Built-in **surge proof voltage protection up to 2000V (max)** enhances durability and reliability in varying electrical environments.

Manufacturer: NHR Nietzsche Enterprise

Category: ZigBee Modules

- **ZigBee HA Profile Compliance:** Fully compliant with the **ZigBee Home Automation (HA) profile**, ensuring interoperability with a wide range of ZigBee coordinators, routers, and smart home gateways. - **Wireless Connectivity:** Operates on the **IEEE 802.15.4** standard, supporting **ZigBee 2007/PRO** protocols for robust, low-power wireless communication. - **Advanced Semiconductor Sensor:** Utilizes a high-sensitivity semiconductor gas sensor for accurate detection of **LPG (liquefied petroleum gas)** and **natural gas (methane)** leaks. - **Auto Reset Function:** Automatically resets after an alarm condition clears, minimizing maintenance and ensuring continuous protection. - **Self-Diagnostic Function:** Built-in **auto-check and malfunction indication** system alerts users to sensor faults or operational issues. - **Visual and Audible Alarms:** Equipped with **flashing LED indicators** and a **sound alarm ≥85 dB**, providing immediate notification of gas leaks. - **Easy Installation:** Designed for **ceiling mounting**, eliminating the need for cable construction and simplifying deployment in both new and existing buildings. - **Auto Reconnection:** Automatically reconnects to the ZigBee network after communication interruptions, maintaining system reliability. - **Compact and Lightweight Design:** Small form factor and low weight make it suitable for discreet installation in various environments. - **Integration Ready:** Easily integrates with **ZigBee-based smart home systems**, alarm panels, and IoT platforms for centralized monitoring and control.

Manufacturer: NHR Nietzsche Enterprise

Category: ZigBee Modules

- **ZigBee Home Automation Compliant:** Fully compatible with ZigBee HA profile, ensuring interoperability with standard ZigBee coordinators and routers. - **Wireless Magnetic Reed Switch:** Detects the opening and closing of doors, windows, cabinets, or other access points using a magnetic reed sensor. - **Battery-Powered Operation:** Uses a **CR2032 lithium button cell**, providing **over one year of battery life** under typical operating conditions. - **Energy-Efficient Design:** Ultra-low standby current of **1.4 µA** and transmission current of **35 mA**, optimizing power usage for long-term operation. - **Easy Installation:** Compact form factor and simple mounting process allow for quick deployment without wiring. - **Auto Reconnection:** Automatically recovers communication when reconnected to the ZigBee network after temporary disconnection. - **Flexible Network Topology:** Supports **Star**, **Tree**, and **Mesh** network configurations for scalable and robust wireless communication. - **High Sensitivity and Range:** Receiver sensitivity of **-92 dBm** and communication range up to **100 meters in open areas**. - **Reliable Performance:** Designed for stable operation in environments with temperatures between **-10°C and +50°C** and up to **90% relative humidity**. - **Compact and Lightweight:** Small footprint (60.5 × 31 × 14.5 mm) and lightweight (46.2 g) for discreet installation. - **HA Profile Integration:** Seamless integration with ZigBee Home Automation systems for smart home security and monitoring applications.

Manufacturer: NHR Nietzsche Enterprise

Category: ZigBee Modules

- **ZigBee HA Profile Compliance:** Fully compliant with the **ZigBee Home Automation (HA) profile**, enabling easy integration with ZigBee-based smart home systems, gateways, and IoT platforms. - **Wireless Operation:** Operates on the **IEEE 802.15.4** standard, eliminating the need for wired connections. This allows for **quick installation** without cable construction or complex wiring. - **Dual Detection Technology:** Combines **photoelectric smoke detection** and **heat detection** (trigger temperature: **57°C**) for enhanced fire detection accuracy and reduced false alarms. - **High Environmental Adaptability:** Designed with **dustproof, mothproof, moisture-proof**, and **anti-white light** features, ensuring stable performance in diverse environmental conditions. - **Infrared Photoelectric Chamber:** Utilizes a pair of **infrared diodes** within a specially designed optical chamber that shields external light while allowing smoke particles to enter. The detector identifies smoke by measuring the reflection of infrared light from airborne particulates. - **Auto Reconnection:** Automatically reconnects to the ZigBee network if communication is interrupted, ensuring continuous monitoring and reliability. - **Visual Indicators:** Equipped with **dual LED indicators** for clear status and alarm signaling. The **red LED** illuminates during alarm conditions. - **Compact and Lightweight Design:** With a diameter of **10.3 cm** and height of **5.3 cm**, and weighing only **185 g**, the detector is suitable for ceiling or wall mounting in residential and commercial environments. - **Energy Efficient:** Low static current consumption of **55 µA**, with an alarm current of **18 mA @ 12V**, optimizing battery or power supply efficiency.

Manufacturer: NHR Nietzsche Enterprise

Category: ZigBee Modules

- **Dual-Technology Detection:** Utilizes both **Passive Infrared (PIR)** and **Microwave (X-Band Mono-static DRO)** sensors for enhanced accuracy and reduced false triggers. - **Adjustable Detection Range:** Configurable sensing distance up to **12 meters**, allowing flexible deployment in various room sizes and layouts. - **Temperature Compensation:** Automatic compensation ensures stable performance across a wide temperature range (-10°C to 50°C). - **Watchdog Function:** Built-in **auto-reset watchdog** maintains continuous operation and system reliability. - **Fire-Resistant Housing:** Constructed from **ABS/PC alloy** with fire-resistant properties for safety and durability. - **Microwave Power Saving:** Incorporates a **5% duty cycle** to minimize power consumption without compromising detection performance. - **Anti-Masking Air Sensor:** Detects attempts to cover or obstruct the sensor, enhancing tamper resistance. - **LED Alarm Indicator:** Visual alarm indication via LED display for 3 seconds upon motion detection. - **Auto Reconnection:** Automatically reconnects to the ZigBee network if communication is interrupted. - **Compact Design:** Small form factor (132 × 65 × 54 mm) suitable for discreet installation in residential, commercial, or industrial environments.

Manufacturer: NHR Nietzsche Enterprise

Category: ZigBee Modules

- **ZigBee HA Profile Compliance:** Fully compliant with the ZigBee Home Automation (HA) profile, ensuring interoperability with a wide range of ZigBee-enabled devices and systems. - **Wireless Operation:** Utilizes the IEEE 802.15.4 ZigBee 2007/PRO protocol for robust, low-power wireless communication. - **Battery-Powered Independence:** Operates on a DC 9V battery, eliminating the need for wired power connections and simplifying installation. - **Photoelectric Detection Principle:** Employs infrared diodes within a specialized optical chamber to detect smoke particles through light scattering. - **High Environmental Adaptability:** Designed with dustproof, mothproof, and moisture-proof construction, and includes anti-white light interference protection for stable performance in diverse environments. - **Compact and Lightweight Design:** With a diameter of 10.7 cm and a height of 3.5 cm, the detector is unobtrusive and suitable for residential, commercial, and industrial applications. - **Audible and Visual Alarm:** Provides both sound and flash alerts when smoke is detected, with an alarm sound level of ≥85 dB/m. - **Easy Installation:** No cabling required; mounts easily on ceilings or walls using standard fixtures. - **Manual Test Function:** Includes a manual test button for functional verification and maintenance checks. - **Auto Reconnection:** Automatically reconnects to the ZigBee network if communication is temporarily interrupted. - **Long Battery Life:** Designed for approximately one year of operation on a single 9V battery under normal conditions. - **Strong Circumstantial Adaptability:** Performs reliably across a wide temperature and humidity range, suitable for varied indoor environments.

Manufacturer: NHR Nietzsche Enterprise

Category: ZigBee Modules

- **Dual Independent CAN Channels:** Two fully isolated CAN ports capable of independent or bridged operation. - **CAN Specification Compliance:** Fully compatible with Bosch CAN Specification 2.0A (11‑bit ID) and 2.0B (29‑bit ID). - **Optical Isolation:** 2500 Vrms galvanic isolation between CAN channels and system bus for enhanced noise immunity and protection. - **High‑Speed Communication:** Programmable transfer rates up to 1 Mbps; supports standard DeviceNet baud rates of 125 Kbps, 250 Kbps, and 500 Kbps. - **Bridge Function:** Enables inter‑CAN communication or network bridging between two CAN buses. - **Direct Memory Mapping:** Provides direct memory‑mapped access to CAN controllers for low‑latency data exchange. - **Integrated CAN Controller:** Utilizes Philips SJA1000 CAN controller for robust bus arbitration, error detection, and automatic retransmission. - **CAN Transceiver:** Employs Philips 82C250 transceivers for reliable differential signaling (CAN_H, CAN_L). - **Plug‑and‑Play Configuration:** Fully compliant with CompactPCI plug‑and‑play architecture; no manual jumper configuration required. - **Software Support:** Includes DOS libraries, Windows 95/98/NT drivers, and example programs. - **Application Layer Support:** Provides master interface support for CANopen, DeviceNet, and Smart Distributed System (SDS) protocols. - **Industrial‑Grade Design:** Wide operating temperature range (0 °C – 60 °C) and humidity tolerance (5 % – 95 % non‑condensing). - **Comprehensive Software API:** Extensive function library for CAN and DeviceNet operations, including message handling, error management, and event callbacks.

Manufacturer: Adlink Technology Inc.

Category: CAN Bus

- **Dual Independent CAN Channels:** Two fully independent CAN 2.0A/B compliant ports, each capable of operating separately or bridged for network redundancy or gateway applications. - **Optical Isolation:** 2500 Vrms galvanic isolation between CAN channels and system bus, ensuring robust protection against electrical noise and ground loops. - **High‑Speed Communication:** Supports programmable baud rates up to 1 Mbps; standard DeviceNet rates of 125 kbps, 250 kbps, and 500 kbps are pre‑configured. - **Bridge Functionality:** Allows inter‑CAN communication bridging for network segmentation or protocol conversion. - **CAN Controller:** Philips/NXP SJA1000 CAN controller with advanced error detection, bus arbitration, and automatic retransmission. - **CAN Transceiver:** Philips 82C250 transceivers providing differential signal interface (CAN_H, CAN_L). - **Plug‑and‑Play Configuration:** Fully PCI Plug‑and‑Play compliant; no manual jumper or address configuration required. - **Rear I/O Connectivity:** CompactPCI rear I/O interface for backplane signal routing, minimizing front‑panel cabling. - **Software Support:** Comprehensive driver and library support for DOS, Windows 95/98, and Windows NT environments. - **Application Layer Support:** Built‑in software library for CANopen, DeviceNet, and SDS (Smart Distributed System) protocols. - **Diagnostic and Control Functions:** LED status indicators, error counters, and programmable error warning limits. - **Industrial‑Grade Design:** Operating temperature 0 °C – 60 °C, humidity 5 % – 95 % non‑condensing.

Manufacturer: Adlink Technology Inc.

Category: CAN Bus

- **Three Independent RTD Input Channels:** Supports simultaneous measurement from up to three RTD sensors, enabling multi-point temperature monitoring. - **CAN-Bus Communication Interface:** Fully compliant with the CAN 2.0A/B standard, allowing integration into existing CAN-based control systems. - **High Accuracy and Stability:** Designed for precise temperature measurement with low drift and high linearity across a wide temperature range. - **Wide RTD Compatibility:** Supports standard RTD types such as Pt100, Pt200, Pt500, and Pt1000, with configurable wiring options (2-, 3-, or 4-wire connections). - **Industrial-Grade Design:** Rugged enclosure and wide operating temperature range suitable for harsh industrial environments. - **Isolation Protection:** Channel-to-channel and channel-to-system isolation to prevent ground loops and electrical interference. - **Configurable Sampling Rate:** Adjustable data acquisition rate to balance between response time and measurement resolution. - **Plug-and-Play Integration:** Compatible with ADLINK’s NuDAM configuration tools and CANopen protocol for easy setup and network management. - **LED Indicators:** Status LEDs for power, communication, and channel activity monitoring. - **DIN-Rail Mountable:** Compact form factor with DIN-rail mounting for easy installation in control cabinets.

Manufacturer: Adlink Technology Inc.

Category: CAN Bus

- **8 Analog Input Channels:** Supports simultaneous measurement of up to eight analog signals, allowing multi-point data acquisition from sensors and transducers. - **CAN-Bus Communication Interface:** Fully compliant with the CAN 2.0A/B standard, enabling high-speed, noise-immune data transmission over industrial networks. - **High Resolution and Accuracy:** Provides 16-bit analog-to-digital conversion for precise signal measurement and minimal quantization error. - **Wide Input Range:** Configurable input ranges for voltage and current signals, typically ±10 V, ±5 V, ±1 V, ±500 mV, ±150 mV, or 0–20 mA, depending on configuration. - **Isolation Protection:** Channel-to-channel and channel-to-system isolation ensures signal integrity and protects against ground loops and electrical interference. - **Rugged Industrial Design:** Built for reliable operation in harsh environments, with extended temperature tolerance and robust housing. - **Flexible Mounting Options:** DIN-rail or wall-mount installation for easy integration into control panels or distributed I/O enclosures. - **Programmable Sampling Rate:** Adjustable sampling frequency to balance between speed and accuracy for different application needs. - **LED Indicators:** Status LEDs for power, communication, and channel activity monitoring. - **Compatibility:** Seamless integration with ADLINK’s NuDAM series and other CANopen-compatible devices. - **Software Support:** Configurable via ADLINK utility software or third-party CANopen configuration tools.

Manufacturer: Adlink Technology Inc.

Category: CAN Bus

- **8 Independent Thermocouple Input Channels:** Supports simultaneous measurement from up to eight thermocouple sensors, enabling multi-point temperature monitoring. - **CAN-Bus Communication Interface:** Fully compliant with the CAN 2.0A/B standard, allowing distributed data acquisition and control over a robust, noise-immune network. - **Wide Thermocouple Compatibility:** Supports standard thermocouple types (J, K, T, E, R, S, B, N) for flexible integration across various industrial temperature measurement applications. - **High Accuracy and Resolution:** Provides precise temperature readings with high-resolution A/D conversion and built-in cold-junction compensation (CJC) for improved measurement stability. - **Industrial-Grade Design:** Rugged, DIN-rail or wall-mountable enclosure suitable for harsh environments, with wide operating temperature range and high electromagnetic immunity. - **Isolation Protection:** Channel-to-system isolation ensures signal integrity and protects against ground loops and electrical interference. - **Configurable Sampling and Filtering:** Adjustable sampling rates and digital filtering options to optimize performance for different signal conditions. - **Easy Integration:** Compatible with ADLINK’s NuDAM configuration software and standard CANopen or proprietary CAN protocols for seamless integration into existing systems. - **LED Indicators:** Status LEDs for power, communication, and channel activity simplify diagnostics and system monitoring. - **Compact and Modular Form Factor:** Enables distributed installation close to sensors, reducing wiring complexity and signal degradation.

Manufacturer: Adlink Technology Inc.

Category: CAN Bus

- **CAN-Bus Communication Interface:** Fully compliant with the CAN 2.0A/B standard, enabling reliable, high-speed communication in distributed control networks. - **4 Analog Output Channels:** Each channel supports programmable voltage or current output ranges, allowing flexible signal generation for actuators, control valves, and other analog-driven devices. - **8 Digital Input Channels:** Optically isolated digital inputs for monitoring switches, sensors, and discrete signals in industrial environments. - **High Accuracy and Stability:** Precision digital-to-analog conversion ensures stable and accurate analog output signals, suitable for demanding control applications. - **Rugged Industrial Design:** Designed for harsh environments with wide operating temperature range, high noise immunity, and robust electrical isolation. - **Modular and Scalable:** Easily integrated into existing CAN-based control systems, allowing expansion of I/O capacity without major system redesign. - **Configurable Parameters:** Output ranges, update rates, and communication parameters can be configured via software tools or CAN commands. - **DIN-Rail or Wall Mountable:** Compact form factor supports flexible installation in control cabinets or distributed field locations. - **LED Indicators:** Status LEDs for power, communication, and channel activity simplify diagnostics and maintenance. - **Low Power Consumption:** Optimized for energy-efficient operation in continuous industrial use.

Manufacturer: Adlink Technology Inc.

Category: CAN Bus

- **Dual Functionality:** Combines 8 digital inputs and 8 digital outputs in a single compact module, reducing wiring complexity and installation space. - **CAN-Bus Communication:** Fully compliant with **CANopen protocol (CiA 301 and CiA 401)** for seamless integration with CAN-based control systems. - **High-Speed Digital I/O:** Supports fast response times suitable for real-time control and monitoring applications. - **Industrial Reliability:** Designed for harsh environments with wide operating temperature range, high noise immunity, and robust electrical isolation. - **Flexible Mounting:** DIN-rail mountable for easy installation in control cabinets or distributed I/O panels. - **LED Indicators:** Each channel features status LEDs for quick diagnostics and operational monitoring. - **Galvanic Isolation:** Provides isolation between channels and communication bus to protect against electrical surges and ground loops. - **Compact Design:** Space-efficient housing ideal for distributed control architectures. - **Configurable I/O Behavior:** Digital outputs can be configured as sourcing or sinking types depending on system requirements. - **Power Efficiency:** Low power consumption suitable for embedded and distributed automation systems.

Manufacturer: Adlink Technology Inc.

Category: CAN Bus

- **15 Digital Input Channels:** Provides fifteen independent digital input lines for monitoring discrete signals such as switches, sensors, or relay contacts. - **CAN-Bus Communication Interface:** Fully compliant with the CAN 2.0A/B standard, enabling seamless integration into existing CAN networks. - **Optical Isolation:** Each input channel is optically isolated from the system logic, providing protection against voltage spikes, ground loops, and electrical noise. - **Wide Input Range:** Supports a broad input voltage range suitable for industrial signal levels, typically 0–30 VDC, allowing compatibility with a variety of field devices. - **High Noise Immunity:** Designed for stable operation in harsh industrial environments with strong electromagnetic interference (EMI). - **Compact and Rugged Design:** Housed in a durable enclosure suitable for DIN-rail or panel mounting, ensuring easy installation and long-term reliability. - **LED Status Indicators:** Each input channel includes an LED indicator for real-time status monitoring, simplifying diagnostics and maintenance. - **Distributed Architecture:** Enables modular expansion of I/O capacity across a CAN network, reducing wiring complexity and improving system scalability. - **Configurable Node ID and Baud Rate:** Supports flexible configuration of CAN node address and communication speed to match network requirements. - **Low Power Consumption:** Optimized for energy-efficient operation, suitable for continuous 24/7 industrial use. - **Software Support:** Compatible with ADLINK’s NuDAM configuration utilities and standard CANopen or proprietary CAN protocols for easy integration with PLCs, SCADA systems, and PC-based controllers.

Manufacturer: Adlink Technology Inc.

Category: CAN Bus

- **8 Relay Output Channels:** Each channel provides an independent relay output for switching digital loads such as solenoids, contactors, alarms, and indicator lamps. - **CAN-Bus Interface:** Fully compliant with **CAN 2.0B** and **CANopen** communication standards, enabling integration into existing CAN-based control networks. - **High Isolation:** Optical and galvanic isolation between channels and communication lines ensures signal integrity and protection against electrical noise and surges. - **Industrial Reliability:** Designed for continuous operation in industrial environments with wide operating temperature ranges and robust housing. - **Modular Distributed Architecture:** Enables flexible system expansion and distributed control without centralized wiring complexity. - **Status Indication:** Each relay channel includes LED indicators for real-time output status monitoring. - **Configurable Node ID and Baud Rate:** DIP switch or software configuration allows easy network setup and addressing. - **Fail-Safe Operation:** Built-in watchdog timer and power-on default states ensure safe operation during communication loss or power interruptions. - **DIN-Rail Mountable:** Compact form factor with DIN-rail mounting for easy installation in control cabinets. - **Low Power Consumption:** Optimized for energy efficiency in distributed systems.

Manufacturer: Adlink Technology Inc.

Category: CAN Bus

- **Dual Counter/Frequency Input Channels:** Two isolated input channels capable of counting pulses or measuring frequency signals independently. - **CAN-Bus Interface:** Fully compliant with the **CAN 2.0A/B** standard, supporting high-speed communication up to **1 Mbps**. - **High Accuracy and Resolution:** Designed for precise event counting and frequency measurement with high input resolution and fast response times. - **Wide Input Range:** Supports TTL, open collector, or contact-type input signals, making it compatible with a variety of sensors and transducers. - **Programmable Functionality:** Each channel can be configured for counter or frequency input mode, with adjustable debounce filters and counting direction. - **Industrial-Grade Design:** Rugged enclosure suitable for harsh industrial environments, with wide operating temperature and high noise immunity. - **Distributed Architecture:** Enables remote data acquisition and control over CAN-Bus networks, reducing wiring complexity and improving scalability. - **LED Indicators:** Status LEDs for power, communication, and channel activity monitoring. - **Flexible Mounting Options:** DIN-rail or panel mounting for easy integration into control cabinets or distributed I/O panels. - **Software Configurable:** Supports configuration and monitoring via Adlink’s NuDAM utility software or third-party CANopen-compatible tools.

Manufacturer: Adlink Technology Inc.

Category: CAN Bus

- **Comprehensive DLL Interface:** Provides a complete set of callable functions for communication with NuDAM 7000 CAN modules, enabling developers to build custom applications in C, C++, Visual Basic, or other Windows-based programming environments. - **Optimized for Windows 95 and Windows NT:** Fully compatible with legacy Windows operating systems, ensuring stable operation in industrial and embedded systems still relying on these platforms. - **Support for NuDAM 7000 CAN Modules:** Specifically designed to interface with the NuDAM 7000 series, a family of distributed I/O and data acquisition modules that communicate via the CAN bus. - **Simplified Integration:** Abstracts complex CAN communication protocols into easy-to-use function calls, reducing development time and minimizing the need for low-level programming. - **Reliable Data Communication:** Ensures robust and error-checked data transfer between host PC and CAN modules, supporting both command and data exchange operations. - **Scalable Architecture:** Supports multiple CAN nodes and modules within a single network, allowing for flexible system expansion. - **Developer-Friendly Documentation:** Typically accompanied by programming guides, function reference manuals, and example code to accelerate application development. - **Backward Compatibility:** Maintains compatibility with existing NuDAM hardware and legacy software systems, ensuring long-term usability. - **Industrial-Grade Reliability:** Designed for continuous operation in industrial environments where stability and communication integrity are critical.

Manufacturer: Adlink Technology Inc.

Category: CAN Bus

- **Dual Independent CAN Channels:** Two fully independent CAN ports allow simultaneous communication on separate CAN networks or bridging between them. - **Optical Isolation:** Each CAN port provides up to **2500 Vrms** isolation (1000 Vrms for PM‑7841), protecting the host system from voltage surges and ground loops. - **CAN Specification Compliance:** Fully compliant with **CAN 2.0A (11‑bit ID)** and **CAN 2.0B (29‑bit ID)** standards. - **High‑Speed Communication:** Supports programmable data rates up to **1 Mbps**, with standard DeviceNet rates of **125 kbps**, **250 kbps**, and **500 kbps**. - **Bridge Functionality:** Enables interconnection between two CAN networks for data exchange or protocol translation. - **Integrated CAN Controller:** Utilizes the **Philips SJA1000** CAN controller for reliable bus arbitration, error detection, and automatic retransmission. - **Transceiver Technology:** Employs **82C250/82C251** transceivers for robust physical‑layer performance. - **Plug‑and‑Play PCI Configuration:** Automatic resource allocation via BIOS—no manual jumper settings required for PCI and cPCI versions. - **Software Support:** Includes DOS libraries, Windows 95/98/NT drivers, and comprehensive C/C++ and Visual Basic APIs for CAN and DeviceNet communication. - **Application Layer Support:** Provides master‑side interfaces for **CANopen**, **DeviceNet**, and **Smart Distributed System (SDS)** protocols. - **Industrial‑Grade Design:** Wide operating temperature range (0 – 60 °C), high humidity tolerance (5 – 95 % non‑condensing), and durable PCB construction. - **Diagnostic LEDs (cPCI/PM versions):** On‑board LEDs indicate port activity and status for quick troubleshooting. - **Termination Control:** On‑board 120 Ω termination resistors selectable via jumpers (JP1/JP2).

Manufacturer: Adlink Technology Inc.

Category: CAN Bus

- **Dual Independent CAN Channels:** Two fully isolated CAN ports capable of independent or bridged operation. - **CAN 2.0A/B Compatibility:** Compliant with Bosch CAN specification 2.0 parts A (11‑bit) and B (29‑bit). - **Optical Isolation:** 1000 Vrms galvanic isolation between CAN bus and logic circuitry, ensuring protection against ground loops and electrical surges. - **High‑Speed Communication:** Programmable transfer rate up to 1 Mbps; supports standard DeviceNet baud rates of 125 Kbps, 250 Kbps, and 500 Kbps. - **Integrated CAN Controller:** Utilizes Philips SJA1000 CAN controller with advanced bus arbitration, error detection, automatic retransmission, and error correction. - **Direct Memory Mapping:** Provides memory‑mapped access to CAN controller registers for efficient data handling. - **Software Programmable Addressing:** Base I/O address and memory mapping configurable via DIP switch and software. - **Bridge Function Support:** Enables inter‑port communication for network bridging or redundancy. - **PC/104 Industry Form Factor:** Compact, stackable design for embedded and industrial PC applications. - **Comprehensive Software Support:** Includes DOS library, Windows 95/98/NT drivers, and example programs. - **DeviceNet, CANopen, and SDS Protocol Support:** Provides a powerful master interface for higher‑layer industrial communication protocols. - **Diagnostic LEDs:** On‑board LEDs for port status indication (supported on cPCI‑7841 and PM‑7841). - **Termination Control:** On‑board 120 Ω termination resistors selectable via jumpers (JP1, JP2). - **Robust Environmental Tolerance:** Designed for 0 °C to 60 °C operation and up to 95% non‑condensing humidity.

Manufacturer: Adlink Technology Inc.

Category: CAN Bus