LOOKING FOR THE RIGHT
INDUSTRIAL SOLUTION?
Discover embedded, communication and automation solutions tailored to your application.
- High-Density Switching: 60-channel Scan/Multiplexer configuration for efficient signal routing in compact PXI 3U form factor.
- Form A Relays: Utilizes Form A (normally open) electromechanical relays for reliable signal switching and isolation.
- Wide Bandwidth: 1 MHz (-3 dB) analog bandwidth supports a broad range of signal frequencies for general-purpose switching.
- PXI/cPCI 3U Compatibility: Fully compliant with PXI and CompactPCI 3U mechanical and electrical standards, ensuring interoperability with modular test systems.
- Hot-Swappable Design: Conforms to PICMG 2.1 R1.0 hot-swap specifications, allowing insertion and removal without system power-down.
- Plug and Play Operation: Automatic resource detection and configuration through PXI system controller for simplified setup.
- High Power Handling: Maximum switching capacity of 30 W, 125 VAC, 30 VDC, and 0.5 A, suitable for low-to-medium power signal routing.
- Compact and Rugged Construction: 3U PXI form factor with 160-pin 2 mm connector for secure and reliable signal connections.
- Versatile Application Range: Ideal for automated test equipment (ATE), data acquisition systems, signal routing, and instrumentation switching.
- Form A Relays: Utilizes Form A (normally open) electromechanical relays for reliable signal switching and isolation.
- Wide Bandwidth: 1 MHz (-3 dB) analog bandwidth supports a broad range of signal frequencies for general-purpose switching.
- PXI/cPCI 3U Compatibility: Fully compliant with PXI and CompactPCI 3U mechanical and electrical standards, ensuring interoperability with modular test systems.
- Hot-Swappable Design: Conforms to PICMG 2.1 R1.0 hot-swap specifications, allowing insertion and removal without system power-down.
- Plug and Play Operation: Automatic resource detection and configuration through PXI system controller for simplified setup.
- High Power Handling: Maximum switching capacity of 30 W, 125 VAC, 30 VDC, and 0.5 A, suitable for low-to-medium power signal routing.
- Compact and Rugged Construction: 3U PXI form factor with 160-pin 2 mm connector for secure and reliable signal connections.
- Versatile Application Range: Ideal for automated test equipment (ATE), data acquisition systems, signal routing, and instrumentation switching.
1. Product Overview
Name: PXI-7611
Model: PXI-7611
Series: PXI cPCI 3U Switching and Multiplexing Series
Article Number: PXI-7611
Manufacturer: ADLINK Technology Inc.
The ADLINK PXI-7611 is a high-performance PXI/cPCI 3U 60-channel Scan/Multiplexer (Scan/MUX) Form A Relay Card designed for automated test and measurement systems requiring flexible signal routing, high channel density, and reliable switching performance. It integrates seamlessly into PXI and CompactPCI platforms, providing a robust and scalable solution for signal switching, routing, and multiplexing applications in laboratory, production, and field environments.
2. Key Features
- High-Density Switching: 60-channel Scan/Multiplexer configuration for efficient signal routing in compact PXI 3U form factor.
- Form A Relays: Utilizes Form A (normally open) electromechanical relays for reliable signal switching and isolation.
- Wide Bandwidth: 1 MHz (-3 dB) analog bandwidth supports a broad range of signal frequencies for general-purpose switching.
- PXI/cPCI 3U Compatibility: Fully compliant with PXI and CompactPCI 3U mechanical and electrical standards, ensuring interoperability with modular test systems.
- Hot-Swappable Design: Conforms to PICMG 2.1 R1.0 hot-swap specifications, allowing insertion and removal without system power-down.
- Plug and Play Operation: Automatic resource detection and configuration through PXI system controller for simplified setup.
- High Power Handling: Maximum switching capacity of 30 W, 125 VAC, 30 VDC, and 0.5 A, suitable for low-to-medium power signal routing.
- Compact and Rugged Construction: 3U PXI form factor with 160-pin 2 mm connector for secure and reliable signal connections.
- Versatile Application Range: Ideal for automated test equipment (ATE), data acquisition systems, signal routing, and instrumentation switching.
3. Technical Specifications
- Form Factor: PXI / CompactPCI 3U
- Card Type: 60-channel Scan/Multiplexer (Scan/MUX)
- Relay Type: Form A (SPST-NO) electromechanical relays
- Number of Channels: 60
- Bandwidth: 1 MHz (-3 dB point)
- Maximum Switching Power: 30 W
- Maximum Switching Voltage: 125 VAC / 30 VDC
- Maximum Switching Current: 0.5 A
- Connector Type: 160-pin, 2 mm pitch PXI/cPCI backplane connector
- Dimensions: 100 mm (height) × 160 mm (depth)
- Weight: Approximately 0.4–0.6 kg (typical for PXI 3U modules; exact weight dependent on configuration)
- Bus Interface: PXI / CompactPCI backplane interface
- Compliance: PICMG 2.1 R1.0 (Hot Swap)
- Operating Temperature Range: Typically 0°C to +55°C (standard PXI environmental range)
- Storage Temperature Range: -20°C to +70°C (typical)
- Humidity: 10% to 90% non-condensing (typical)
- Insulation Resistance: >1 GΩ at 500 VDC (typical for Form A relays)
- Contact Resistance: <100 mΩ (initial, typical)
- Relay Life Expectancy: Mechanical: >10⁷ operations; Electrical: >10⁵ operations (at rated load)
4. Functionality
The PXI-7611 functions as a 60-channel scanning multiplexer, enabling sequential or selective connection of multiple input signals to a common output path. Each channel is controlled via software commands through the PXI backplane interface, allowing dynamic configuration of signal routing during test execution.
Operating Principle:
- Each of the 60 Form A relays can independently connect or disconnect a signal path.
- The relays are controlled by the PXI controller through the backplane, enabling automated switching sequences.
- The card supports both scanning (sequential channel activation) and multiplexing (selective channel activation) modes.
Use Cases and Applications:
- Automated Test Equipment (ATE) for electronic component and subsystem testing.
- Signal routing in data acquisition systems.
- Switching of analog or low-frequency digital signals in instrumentation setups.
- Multiplexing of sensor inputs or measurement channels in laboratory environments.
- Integration into PXI-based modular test systems for flexible signal management.
Compatibility:
- Compatible with PXI and CompactPCI 3U chassis.
- Operates with standard PXI controllers and software frameworks.
- Supports integration with ADLINK’s PXI software drivers and APIs for LabVIEW, MATLAB, and other test automation environments.
5. Components & Accessories
Included Items:
- PXI-7611 60-channel Scan/MUX Form A Relay Card
- User documentation and quick start guide
- Software drivers and configuration utilities (downloadable from ADLINK support portal)
Optional Accessories:
- PXI slot filler panels (for unused slots)
- Shielded cable assemblies for signal connections
- Terminal blocks or breakout modules for 160-pin connector interfacing
- PXI chassis and controller modules (sold separately)
Connectors:
- Primary Interface: 160-pin 2 mm PXI/cPCI connector for backplane communication and power.
- Signal Interface: Front-panel connector or rear I/O (depending on chassis configuration) for external signal routing.
6. Installation & Setup
Requirements:
- PXI or CompactPCI 3U chassis with available slot.
- Compatible PXI controller or host PC with PXI interface.
- Appropriate software drivers and configuration tools installed.
Mounting Options:
- Standard PXI 3U slot installation.
- Secured via front-panel screws and guide rails for mechanical stability.
Configuration Steps:
1. Power down the PXI chassis (if not using hot-swap).
2. Insert the PXI-7611 module into an available 3U slot, aligning with the guide rails.
3. Secure the module using the front-panel retaining screws.
4. Power on the chassis; the module will be automatically detected by the PXI controller.
5. Install ADLINK-provided drivers and verify device recognition in the system configuration utility.
6. Configure channel mappings and relay control through the provided software interface or API.
Hot-Swap Operation:
- The PXI-7611 supports PICMG 2.1 R1.0 hot-swappable operation, allowing insertion or removal while the system remains powered, provided the chassis supports this feature.
7. Performance & Capabilities
Switching Speed:
- Typical relay operate time: 3–10 ms (depending on relay type).
- Release time: 2–5 ms (typical).
Signal Integrity:
- 1 MHz (-3 dB) bandwidth ensures minimal signal degradation for low-frequency analog and digital signals.
- Low contact resistance and high insulation resistance maintain signal quality and isolation.
Capacity and Efficiency:
- 60 channels provide high-density switching in a single PXI slot, optimizing system space and reducing wiring complexity.
- Efficient power handling up to 30 W allows for moderate load switching without external relays.
Limitations:
- Not suitable for high-voltage or high-current switching beyond 125 VAC or 0.5 A.
- Bandwidth limited to 1 MHz, making it unsuitable for high-frequency RF applications.
- Relay-based design introduces mechanical wear over time; periodic maintenance or relay replacement may be required for high-duty-cycle applications.
8. Standards & Compliance
- PXI Standard Compliance: Fully compliant with PXI (PCI eXtensions for Instrumentation) specifications for 3U modules.
- CompactPCI Compliance: Meets CompactPCI electrical and mechanical standards.
- Hot Swap Compliance: Conforms to PICMG 2.1 R1.0 for hot-swappable modules.
- Safety and EMC: Designed to meet international safety and electromagnetic compatibility standards (CE, FCC Class A, typical for ADLINK PXI modules).
- RoHS Compliance: Manufactured in accordance with the Restriction of Hazardous Substances (RoHS) directive.
- Quality Assurance: Produced under ISO 9001-certified manufacturing processes.
9. Additional Information
Warranty:
- Standard ADLINK limited warranty (typically 1–3 years, depending on region and distributor).
- Covers defects in materials and workmanship under normal operating conditions.
Support:
- Comprehensive technical support via ADLINK’s global service network.
- Access to online documentation, driver downloads, and software updates.
- Application notes and integration guides available for system developers.
Maintenance:
- Periodic inspection recommended for relay wear and contact integrity.
- Clean connectors and ensure proper seating in PXI chassis to maintain signal quality.
- Replace relays as needed after rated life cycles for sustained performance.
Software & Updates:
- Supported by ADLINK’s PXI software suite, including drivers for Windows and Linux.
- Compatible with major test automation environments such as NI LabVIEW, LabWindows/CVI, and MATLAB.
- Firmware and driver updates available through ADLINK’s support portal to ensure long-term compatibility and performance optimization.
Summary
The ADLINK PXI-7611 PXI/cPCI 3U 60-Channel Scan/Multiplexer Form A Relay Card is a versatile and reliable switching solution for modular test and measurement systems. With its 60-channel capacity, 1 MHz bandwidth, and compliance with PXI and CompactPCI standards, it provides a robust platform for signal routing, scanning, and multiplexing in automated test environments. Its hot-swappable design, plug-and-play configuration, and high-quality relay components make it an ideal choice for engineers and system integrators seeking a balance of performance, flexibility, and durability in PXI-based instrumentation setups.
Approximate Length: ~3,050 tokens (~12,200 characters)
Name: PXI-7611
Model: PXI-7611
Series: PXI cPCI 3U Switching and Multiplexing Series
Article Number: PXI-7611
Manufacturer: ADLINK Technology Inc.
The ADLINK PXI-7611 is a high-performance PXI/cPCI 3U 60-channel Scan/Multiplexer (Scan/MUX) Form A Relay Card designed for automated test and measurement systems requiring flexible signal routing, high channel density, and reliable switching performance. It integrates seamlessly into PXI and CompactPCI platforms, providing a robust and scalable solution for signal switching, routing, and multiplexing applications in laboratory, production, and field environments.
2. Key Features
- High-Density Switching: 60-channel Scan/Multiplexer configuration for efficient signal routing in compact PXI 3U form factor.
- Form A Relays: Utilizes Form A (normally open) electromechanical relays for reliable signal switching and isolation.
- Wide Bandwidth: 1 MHz (-3 dB) analog bandwidth supports a broad range of signal frequencies for general-purpose switching.
- PXI/cPCI 3U Compatibility: Fully compliant with PXI and CompactPCI 3U mechanical and electrical standards, ensuring interoperability with modular test systems.
- Hot-Swappable Design: Conforms to PICMG 2.1 R1.0 hot-swap specifications, allowing insertion and removal without system power-down.
- Plug and Play Operation: Automatic resource detection and configuration through PXI system controller for simplified setup.
- High Power Handling: Maximum switching capacity of 30 W, 125 VAC, 30 VDC, and 0.5 A, suitable for low-to-medium power signal routing.
- Compact and Rugged Construction: 3U PXI form factor with 160-pin 2 mm connector for secure and reliable signal connections.
- Versatile Application Range: Ideal for automated test equipment (ATE), data acquisition systems, signal routing, and instrumentation switching.
3. Technical Specifications
- Form Factor: PXI / CompactPCI 3U
- Card Type: 60-channel Scan/Multiplexer (Scan/MUX)
- Relay Type: Form A (SPST-NO) electromechanical relays
- Number of Channels: 60
- Bandwidth: 1 MHz (-3 dB point)
- Maximum Switching Power: 30 W
- Maximum Switching Voltage: 125 VAC / 30 VDC
- Maximum Switching Current: 0.5 A
- Connector Type: 160-pin, 2 mm pitch PXI/cPCI backplane connector
- Dimensions: 100 mm (height) × 160 mm (depth)
- Weight: Approximately 0.4–0.6 kg (typical for PXI 3U modules; exact weight dependent on configuration)
- Bus Interface: PXI / CompactPCI backplane interface
- Compliance: PICMG 2.1 R1.0 (Hot Swap)
- Operating Temperature Range: Typically 0°C to +55°C (standard PXI environmental range)
- Storage Temperature Range: -20°C to +70°C (typical)
- Humidity: 10% to 90% non-condensing (typical)
- Insulation Resistance: >1 GΩ at 500 VDC (typical for Form A relays)
- Contact Resistance: <100 mΩ (initial, typical)
- Relay Life Expectancy: Mechanical: >10⁷ operations; Electrical: >10⁵ operations (at rated load)
4. Functionality
The PXI-7611 functions as a 60-channel scanning multiplexer, enabling sequential or selective connection of multiple input signals to a common output path. Each channel is controlled via software commands through the PXI backplane interface, allowing dynamic configuration of signal routing during test execution.
Operating Principle:
- Each of the 60 Form A relays can independently connect or disconnect a signal path.
- The relays are controlled by the PXI controller through the backplane, enabling automated switching sequences.
- The card supports both scanning (sequential channel activation) and multiplexing (selective channel activation) modes.
Use Cases and Applications:
- Automated Test Equipment (ATE) for electronic component and subsystem testing.
- Signal routing in data acquisition systems.
- Switching of analog or low-frequency digital signals in instrumentation setups.
- Multiplexing of sensor inputs or measurement channels in laboratory environments.
- Integration into PXI-based modular test systems for flexible signal management.
Compatibility:
- Compatible with PXI and CompactPCI 3U chassis.
- Operates with standard PXI controllers and software frameworks.
- Supports integration with ADLINK’s PXI software drivers and APIs for LabVIEW, MATLAB, and other test automation environments.
5. Components & Accessories
Included Items:
- PXI-7611 60-channel Scan/MUX Form A Relay Card
- User documentation and quick start guide
- Software drivers and configuration utilities (downloadable from ADLINK support portal)
Optional Accessories:
- PXI slot filler panels (for unused slots)
- Shielded cable assemblies for signal connections
- Terminal blocks or breakout modules for 160-pin connector interfacing
- PXI chassis and controller modules (sold separately)
Connectors:
- Primary Interface: 160-pin 2 mm PXI/cPCI connector for backplane communication and power.
- Signal Interface: Front-panel connector or rear I/O (depending on chassis configuration) for external signal routing.
6. Installation & Setup
Requirements:
- PXI or CompactPCI 3U chassis with available slot.
- Compatible PXI controller or host PC with PXI interface.
- Appropriate software drivers and configuration tools installed.
Mounting Options:
- Standard PXI 3U slot installation.
- Secured via front-panel screws and guide rails for mechanical stability.
Configuration Steps:
1. Power down the PXI chassis (if not using hot-swap).
2. Insert the PXI-7611 module into an available 3U slot, aligning with the guide rails.
3. Secure the module using the front-panel retaining screws.
4. Power on the chassis; the module will be automatically detected by the PXI controller.
5. Install ADLINK-provided drivers and verify device recognition in the system configuration utility.
6. Configure channel mappings and relay control through the provided software interface or API.
Hot-Swap Operation:
- The PXI-7611 supports PICMG 2.1 R1.0 hot-swappable operation, allowing insertion or removal while the system remains powered, provided the chassis supports this feature.
7. Performance & Capabilities
Switching Speed:
- Typical relay operate time: 3–10 ms (depending on relay type).
- Release time: 2–5 ms (typical).
Signal Integrity:
- 1 MHz (-3 dB) bandwidth ensures minimal signal degradation for low-frequency analog and digital signals.
- Low contact resistance and high insulation resistance maintain signal quality and isolation.
Capacity and Efficiency:
- 60 channels provide high-density switching in a single PXI slot, optimizing system space and reducing wiring complexity.
- Efficient power handling up to 30 W allows for moderate load switching without external relays.
Limitations:
- Not suitable for high-voltage or high-current switching beyond 125 VAC or 0.5 A.
- Bandwidth limited to 1 MHz, making it unsuitable for high-frequency RF applications.
- Relay-based design introduces mechanical wear over time; periodic maintenance or relay replacement may be required for high-duty-cycle applications.
8. Standards & Compliance
- PXI Standard Compliance: Fully compliant with PXI (PCI eXtensions for Instrumentation) specifications for 3U modules.
- CompactPCI Compliance: Meets CompactPCI electrical and mechanical standards.
- Hot Swap Compliance: Conforms to PICMG 2.1 R1.0 for hot-swappable modules.
- Safety and EMC: Designed to meet international safety and electromagnetic compatibility standards (CE, FCC Class A, typical for ADLINK PXI modules).
- RoHS Compliance: Manufactured in accordance with the Restriction of Hazardous Substances (RoHS) directive.
- Quality Assurance: Produced under ISO 9001-certified manufacturing processes.
9. Additional Information
Warranty:
- Standard ADLINK limited warranty (typically 1–3 years, depending on region and distributor).
- Covers defects in materials and workmanship under normal operating conditions.
Support:
- Comprehensive technical support via ADLINK’s global service network.
- Access to online documentation, driver downloads, and software updates.
- Application notes and integration guides available for system developers.
Maintenance:
- Periodic inspection recommended for relay wear and contact integrity.
- Clean connectors and ensure proper seating in PXI chassis to maintain signal quality.
- Replace relays as needed after rated life cycles for sustained performance.
Software & Updates:
- Supported by ADLINK’s PXI software suite, including drivers for Windows and Linux.
- Compatible with major test automation environments such as NI LabVIEW, LabWindows/CVI, and MATLAB.
- Firmware and driver updates available through ADLINK’s support portal to ensure long-term compatibility and performance optimization.
Summary
The ADLINK PXI-7611 PXI/cPCI 3U 60-Channel Scan/Multiplexer Form A Relay Card is a versatile and reliable switching solution for modular test and measurement systems. With its 60-channel capacity, 1 MHz bandwidth, and compliance with PXI and CompactPCI standards, it provides a robust platform for signal routing, scanning, and multiplexing in automated test environments. Its hot-swappable design, plug-and-play configuration, and high-quality relay components make it an ideal choice for engineers and system integrators seeking a balance of performance, flexibility, and durability in PXI-based instrumentation setups.
Approximate Length: ~3,050 tokens (~12,200 characters)
No manuals/catalogs available.
No accessories available.
