Bracket for expansion sockets, 5pcs per pack

Manufacturer: No category

Category: Nuvo-6000/7000/8000-Series

Cable assembly, 1*DB9(F) to 3*DB9(M), 10CM, for Nuvo-6000 series

Manufacturer: No category

Category: Nuvo-6000/7000/8000-Series

Control / Data Collection

Manufacturer: No category

Category: Smart Sensors

Dinrail clip for Nuvo-2000/4000/6000 series

Manufacturer: No category

Category: Nuvo-6000/7000/8000-Series

Environmental Monitoring

Manufacturer: No category

Category: Smart Sensors

Gateway

Manufacturer: No category

Category: Smart Sensors

LoRa Module

Manufacturer: No category

Category: Smart Sensors

Rack mounting kit for Nuvo-6000

Manufacturer: No category

Category: Nuvo-6000/7000/8000-Series

Security

Manufacturer: No category

Category: Smart Sensors

- **Dual‑Protocol Conversion:** Converts between Modbus RTU/ASCII and Modbus TCP over Wi‑Fi or Ethernet. Supports both directions: - Modbus RTU/ASCII Slave ↔ Modbus TCP Master - Modbus TCP Slave ↔ Modbus RTU/ASCII Master - **Wireless Connectivity:** Integrated IEEE 802.11 b/g/n Wi‑Fi interface supporting data rates up to 72.2 Mbps (20 MHz bandwidth). Operates in the 2.4 GHz band with up to 100 m transmission distance. - **Ethernet Interface:** 10/100 Mbps auto‑detecting RJ‑45 port with 1.5 kV magnetic isolation for secure wired connectivity. - **Multi‑Master/Slave Support:** Handles up to 8 simultaneous TCP Masters and allows a serial Master to access up to 8 TCP Slaves concurrently. - **Flexible Serial Communication:** One RS‑232 (DB9 male) and one RS‑422/485 (4‑pin terminal block) port with configurable baud rates (300 bps–230.4 kbps), parity, data bits, and stop bits. - **Web‑Based Configuration:** Built‑in HTTP/HTTPS web server for configuration via standard browsers (IE, Chrome, Firefox). No proprietary software required. - **Security and Access Control:** Supports login and setup passwords, WEP/WPA/WPA2 encryption, AES, WAPI, and 802.1x authentication. - **Dynamic IP Management:** DHCP client support for automatic IP assignment; static IP configuration also available. - **Firmware Upgradeable:** Remote firmware updates via Ethernet to maintain compatibility with evolving network standards. - **Industrial Design:** Compact, rugged PVC housing suitable for harsh environments. Operating temperature range: −20 °C to +70 °C. - **Ease of Setup:** Default Access Point (AP) mode for initial configuration; SSID broadcast as “EXiot_+MAC address.”

Manufacturer: TOPSCCC

Category: Gateway Wireless

- **ARM9 200 MHz 32-bit Processor:** Ensures efficient data handling and low-latency communication between serial and network interfaces. - **Memory Configuration:** 128 MB SDRAM and 32 MB SRAM for stable operation and buffering of serial data streams. - **Multi-Protocol Serial Support:** Compatible with RS-232, RS-422, and RS-485 standards, allowing integration with a wide range of industrial devices such as PLCs, sensors, and meters. - **Wi-Fi Connectivity:** Supports IEEE 802.11b/g/n standards with data rates up to 72.2 Mbps (20 MHz bandwidth). Operates in the 2.4 GHz band with DSSS and OFDM modulation. - **Ethernet Interface:** 10/100 Mbps auto-detecting RJ-45 port with 1.5 kV magnetic isolation for reliable wired networking. - **Flexible Network Modes:** Operates as TCP Server, TCP Client, or UDP Client, supporting both infrastructure and access point (AP) Wi-Fi modes. - **Web-Based Configuration:** Intuitive HTTPS browser interface for setup and management; no proprietary software required. - **Security Features:** Supports WEP (64/128-bit), WPA/WPA2 Personal, AES encryption, WPS 2.0, and WAPI. Includes setup and access passwords for device protection. - **Dynamic IP Configuration:** DHCP client support for automatic IP assignment; static IP configuration also available. - **Overvoltage and ESD Protection:** 15 kV ESD protection on all serial lines ensures durability in industrial environments. - **Wide Temperature Range:** Operational from -20°C to +70°C, suitable for harsh industrial conditions. - **Watchdog Timer (WDT):** Ensures system reliability by automatically recovering from communication errors or system hangs. - **Firmware Upgradeable:** Remote firmware updates via Ethernet to maintain compatibility with evolving network standards. - **Modbus-RTU Support:** Enables integration with Modbus-based automation systems. - **Optional Isolated Ethernet Port:** Provides additional electrical isolation for sensitive applications.

Manufacturer: TOPSCCC

Category: Gateway Wireless

- **Protocol Conversion:** Converts Modbus RTU/ASCII over RS‑232/422/485 to Modbus TCP over Wi‑Fi or Ethernet, enabling transparent communication between serial and IP‑based systems. - **Dual Network Interfaces:** Equipped with both a 10/100 Mbps Ethernet port and an IEEE 802.11 b/g/n Wi‑Fi interface for flexible connectivity. - **Wi‑Fi Standards & Security:** Supports IEEE 802.11 b/g/n with data rates up to 72.2 Mbps (20 MHz bandwidth). Includes WEP 64/128‑bit, WPA/WPA2‑Personal, AES, WPS 2.0, and WAPI encryption for secure wireless communication. - **Multi‑Master/Slave Support:** Handles up to 8 simultaneous TCP Masters and allows a serial Master to access up to 8 TCP Slaves concurrently. - **Web‑Based Configuration:** Integrated HTTP/HTTPS web server for configuration via standard browsers (IE, Chrome, Firefox). No proprietary software required. - **Flexible Operating Modes:** Operates as TCP Server, TCP Client, or UDP node. Supports both Infrastructure and Access Point (AP) Wi‑Fi modes. - **Industrial Design:** Compact, robust PVC housing with DIN‑rail mounting option. Designed for ‑20 °C to +70 °C operation and 10–95 % RH humidity. - **High Reliability:** Built‑in 1.5 kV magnetic isolation on Ethernet port and 15 kV ESD protection on all serial lines. - **Remote Firmware Update:** Firmware can be upgraded via Ethernet to maintain compatibility with evolving network standards. - **Dynamic IP Configuration:** DHCP client support simplifies network setup and management.

Manufacturer: TOPSCCC

Category: Gateway Wireless

- **Multi-Protocol Serial Conversion:** Converts RS-232, RS-422, and RS-485 serial data into TCP/IP packets for transmission over Ethernet or Wi-Fi networks. - **Dual Network Interfaces:** Equipped with both a 10/100 Mbps Ethernet port and a Wi-Fi interface supporting IEEE 802.11b/g/n standards. - **High-Performance ARM9 Processor:** 580 MHz 32-bit CPU with 128 MB SDRAM and 32 MB SRAM ensures stable, low-latency data handling. - **Wide Baud Rate Range:** Supports serial communication speeds from 300 bps up to 230.4 kbps. - **Flexible Network Modes:** Operates as TCP Server, TCP Client, or UDP Client, allowing integration into diverse network topologies. - **Web-Based Configuration:** Intuitive HTTPS-based web interface for configuration using standard browsers (IE, Chrome, Firefox). - **Security and Access Control:** Supports WEP (64/128-bit), WPA/WPA2, AES encryption, and password-protected access. - **Dynamic IP Management:** DHCP client support for automatic IP assignment; static IP configuration also available. - **Industrial-Grade Design:** Extended operating temperature range (-20°C to +70°C) and 15 kV ESD protection on all serial lines. - **Overvoltage and Isolation Protection:** Built-in 1.5 kV magnetic isolation on Ethernet port and surge protection on serial interfaces. - **Firmware Upgradeable:** Remote firmware update capability via Ethernet. - **Modbus-RTU Support:** Compatible with Modbus-RTU protocol for industrial automation systems. - **Watchdog Timer (WDT):** Ensures continuous operation and automatic recovery from system faults. - **Optional Ethernet Isolation:** Provides additional protection for sensitive industrial environments.

Manufacturer: TOPSCCC

Category: Gateway Wireless

0.5m IEEE-488 cable, heavy duty double sided metal connectors

Manufacturer: Axiom

Category: IEEE (GPIB) Cards

RS485 1 channel transmitter input module with LED display, Adlink

Manufacturer: Adlink Technology Inc.

Category: RS485 DIN Rail IO Modules

- **Single EPP/ECP Parallel Port:** Provides one fully functional parallel interface supporting both EPP (Enhanced Parallel Port) and ECP (Extended Capabilities Port) modes for high-speed bidirectional data transfer. - **ISA Bus Interface:** Designed for standard 16-bit ISA bus systems, ensuring compatibility with legacy industrial PCs and embedded controllers. - **16-Byte FIFO Buffer:** Incorporates a 16-byte First-In-First-Out (FIFO) buffer to optimize data throughput and minimize CPU load during high-speed transfers. - **DMA and IRQ Support:** Configurable for DMA channels 1 or 3 and interrupt requests (IRQ) 3, 4, 5, 7, 9, 10, 11, 12, or 15, allowing flexible system integration and conflict-free operation. - **Selectable Base Addresses:** Supports multiple base I/O addresses including 0x3BC, 0x378, 0x278, 0x268, 0x27C, and 0x26C, enabling compatibility with various system configurations and legacy software. - **Compact Form Factor:** Physical dimensions of 130 mm x 65 mm make it suitable for compact enclosures and embedded systems. - **High Compatibility:** Works with a wide range of operating systems and hardware platforms that support ISA bus architecture. - **Industrial-Grade Reliability:** Built with high-quality components and robust PCB design for long-term stability in industrial and embedded environments.

Manufacturer: Titan

Category: General Purpose Cards

**High-Performance Switching Technology** - Supports **10/100BaseT(X)** (RJ45) and **100BaseFX** (multimode fiber) interfaces. - Compliant with **IEEE 802.3, 802.3u, 802.3x, and 802.1D** Ethernet standards. - Implements **store-and-forward switching** with a **4K MAC address table** for efficient packet handling. - **Auto-negotiation** for speed and duplex mode, and **auto MDI/MDI-X** for cable type detection. - **Full/Half-duplex** operation with **IEEE 802.3x flow control** and **back pressure flow control**. **Industrial-Grade Reliability** - **Redundant Ethernet Ring (Turbo Ring)** with recovery time **

Manufacturer: Moxa

Category: RS232

**High-Performance Switching and Management** - 8-port managed Ethernet switch with 7 × 10/100BaseT(X) RJ45 ports and 1 × 100BaseFX single-mode fiber port (SC connector). - Complies with IEEE 802.3, 802.3u, 802.3x, and 802.1D standards. - Store-and-forward switching architecture with a 4K MAC address table for efficient traffic handling. - Supports SNMP v1/v2c, DHCP Server/Client, BOOTP, RARP, and SMTP protocols. - Full/Half-duplex operation with auto-negotiation and MDI/MDI-X auto-sensing. **Industrial Reliability and Redundancy** - MOXA Turbo Ring™ technology enables redundant Ethernet ring topology with recovery time < 300 ms under full load (up to 120 nodes). - Patented Line-Swap Fast Recovery (< 1 second) for rapid reconnection when network topology changes. - Dual redundant DC power inputs ensure continuous operation in case of power source failure. - Automatic IP address recovery for connected devices via DHCP/BootP/RARP. **Rugged Industrial Design** - IP30-rated aluminum housing for mechanical protection and EMI shielding. - Wide operating temperature range: 0–60°C (standard), extended -40–75°C for “-T” models. - Designed for hazardous locations: UL/cUL Class I, Division 2, Groups A–D; ATEX Zone 2 certified. - Shock, vibration, and free-fall tested per IEC60068 standards. **Advanced Monitoring and Alerts** - Configurable e-mail and relay output alarms for power, port, and topology events. - LED indicators for power (P1, P2), fault, and link/activity (10/100 LNK/ACT). - Relay contact output rated at 1A @ 24VDC for external alarm integration. **Flexible Configuration and Management** - Configuration via web browser, Telnet, serial console (RS-232 RJ45), or MOXA Windows utility. - Batch configuration support for multiple devices. - Port mirroring and Ping utility for diagnostics and network integrity testing. - Compatible with MOXA EDS-SNMP OPC Server Pro for integration with SCADA and OPC-based systems.

Manufacturer: Moxa

Category: RS232

, etc.) even though they technically count as formatting? Please choose one: 1. Plain-text summary with no formatting at all (just line breaks, bullet lists allowed) 2. Structured summary with the exact numbered headings you requested

Manufacturer: Oring

Category: Industrial Media Converter

1*10/100Base TX Ethernet to SFP100 converter, Alarm Relay out configurable, 9..30VDC in, dual power input, DIN rail mountable, extended operating temperature -40°..+75°C, ~300gr, ~4,5W, Oring

Manufacturer: Oring

Category: Industrial Media Converter

1*10/100Base TX Ethernet to 100Base FX SC Fiber converter, Alarm Relay out configurable, 9..30VDC in, dual power input, DIN rail mountable, extended operating temperature -40°..+75°C, ~300gr, ~4,5W, Oring

Manufacturer: Oring

Category: Industrial Media Converter

- **Single Analog Output Channel:** Provides one analog output channel configurable for voltage or current output modes. - **12-bit Resolution:** Ensures fine output granularity and high signal accuracy for industrial control applications. - **Output Range Flexibility:** Supports voltage output from 0–10 VDC and current output ranges of 0–20 mA or 4–20 mA. - **RS485 Communication Interface:** Fully compatible with standard RS485 networks, enabling multi-drop communication and long-distance data transmission. - **Wide Operating Temperature Range:** Designed for reliable operation in extended industrial temperature environments. - **Dual Watchdog Timer (WDT):** Provides system reliability by monitoring both host and module operation, ensuring safe fallback states in case of communication failure. - **Selectable Power Source:** Internal power (default) supports up to 500 Ω load; external 24 V power option supports up to 1050 Ω load. - **Programmable Slew Rate Control:** Allows smooth, controlled output transitions to prevent abrupt signal changes that could affect sensitive equipment. - **Safe and Power-On Values:** Configurable safe-state and power-on output values ensure predictable behavior during startup or communication loss. - **Current Readback Function:** Enables monitoring of actual output current for diagnostic and verification purposes. - **Low Power Consumption:** Typical power consumption of 2 W, suitable for distributed I/O systems. - **Calibration and Configuration Commands:** Comprehensive command set for calibration, configuration, and monitoring via RS485 communication.

Manufacturer: TOPSCCC

Category: Module AD Out

- **High Resolution:** 16-bit digital-to-analog conversion for precise output control. - **Single Analog Output Channel:** Supports one configurable output channel for voltage or current signals. - **Output Range Flexibility:** Selectable output ranges of 0–10 VDC, 0–20 mA, or 4–20 mA. - **RS-485 Communication Interface:** Fully compatible with standard RS-485 networks using ASCII command protocol. - **Wide Operating Temperature Range:** Designed for industrial environments with extended temperature tolerance. - **Dual Watchdog Timer (WDT):** Ensures system reliability by monitoring both host and module operation. - **Safe and Power-On Values:** Configurable safe-state and power-on output values for fail-safe operation. - **Internal or External Power Drive:** Internal power supports up to 500 Ω load; external 24 V supply supports up to 1050 Ω load. - **Programmable Slew Rate Control:** Adjustable output transition rate from immediate change to gradual ramping (0.0625 V/s to 512 V/s or equivalent current rates). - **Current Readback Function:** Integrated A/D converter for monitoring actual output current, enabling fault detection. - **Low Power Consumption:** Typical consumption of 2 W. - **Compact Modular Design:** Fits within the EX9000 series modular I/O system for distributed automation.

Manufacturer: TOPSCCC

Category: Module AD Out

- **Embedded Industrial Controller:** Designed for Ethernet and Internet-based control and monitoring applications. - **CPU:** Intel 80188 processor operating at 40 MHz, optimized for embedded DOS environments. - **Memory:** 256 KB Flash and 256 KB SRAM (some variants include 512 KB configurations). - **Communication Interfaces:** - 1 × RS-232 port with 5-wire hardware flow control. - 1 × RS-485 port with automatic direction control. - 2 × Ethernet ports (10Base-T, RJ-45 connectors). - **Operating System:** Embedded Datalight ROM-DOS with MiniBIOS and Sockets TCP/IP stack. - **Real-Time Clock (RTC):** Integrated for timekeeping and scheduling functions. - **Display:** Built-in 5-digit 7-segment LED display for system status and configuration feedback. - **Fanless Design:** Ensures silent operation and high reliability in industrial environments. - **Mounting:** Compact, robust housing suitable for DIN rail installation. - **Software Support:** Includes utilities for configuration, file transfer, and network diagnostics (e.g., Xcom.exe, NetTest, Infoset.exe). - **Virtual COM Port Support:** VSP/VirCOM software enables legacy serial applications to communicate over TCP/IP without modification. - **Wide Temperature Range:** Designed for extended industrial temperature operation.

Manufacturer: TOPSCCC

Category: Modules Ethernet/RS485/RS232

- **Embedded Industrial Controller:** Designed for Ethernet and Internet-based industrial control systems. - **CPU:** Intel 80188 processor running at 40 MHz, optimized for embedded DOS operations. - **Memory:** 512 KB Flash memory and 512 KB SRAM for program and data storage. - **Communication Interfaces:** - 1 × RS-232 port with 5-wire hardware flow control. - 1 × RS-485 port with automatic direction control. - 1 × 10Base-T Ethernet port (RJ-45 connector). - **Expandable Serial Communication:** Supports up to six additional RS-232 ports via add-on cards. - **Built-in RTC, NVRAM, and Serial EEPROM:** Ensures data retention and timekeeping during power loss. - **Embedded Operating System:** Runs Datalight ROM-DOS with MiniBIOS and Sockets TCP/IP stack. - **Virtual COM Port Support:** Compatible with VSP/VirCOM software for transparent serial-over-Ethernet communication. - **Fanless, Compact Design:** Ruggedized for industrial environments with extended temperature operation. - **DIN Rail Mounting:** Simplifies installation in control cabinets. - **LED Display:** Integrated 5-digit 7-segment LED for system status and configuration feedback. - **Software Utilities:** Includes tools for configuration, file transfer, ROM updates, and network diagnostics.

Manufacturer: TOPSCCC

Category: Modules Ethernet/RS485/RS232