Produktsuche

- **PCI Express® x1 Compliant:** Fully compatible with PCI Express Base Specification Revision 1.1. - **Dual IEEE 1394b Ports:** Two independent FireWire 800 (9-pin) ports supporting up to 800 Mb/s each. - **High-Speed Image Transfer:** Optimized for real-time image acquisition and transmission in machine vision systems. - **Industrial Screw-Lock Connectors:** Ensures secure and vibration-resistant cable connections. - **Channel Status LEDs:** Two front-panel green LEDs indicate active camera connections for each port. - **Integrated Power Supply:** 4-pin ATX connector provides +12 V power to connected IEEE 1394b cameras. - **Short-Circuit Protection:** Built-in overcurrent protection for each port (1 A @ +12 V). - **Compact Half-Length Form Factor:** Suitable for space-constrained industrial PCs. - **Plug-and-Play Operation:** IEEE 1394b standard supports automatic device recognition and configuration. - **Software Compatibility:** Supports Windows® XP, XP Embedded, and Vista (32-bit). - **User EEPROM:** 2 Kbit onboard EEPROM for configuration and identification data storage.

Hersteller: Adlink Technology Inc.

Kategorie: Frame Grabber

- **PCI Express® x1 Interface:** Fully compliant with PCIe Gen 1 x1 standard, ensuring high-speed data throughput and compatibility with modern industrial PCs. - **EtherCAT Master Control:** Supports up to 32 synchronized motion axes and 10,000 I/O points via EtherCAT network. - **High-Speed Cycle Time:** Configurable EtherCAT cycle times of 250 µs, 500 µs, 1000 µs, 2000 µs, or 4000 µs for deterministic real-time control. - **Broad Slave Compatibility:** Compatible with a wide range of third-party EtherCAT slave devices, including servo drives, I/O modules, and sensors. - **Dedicated Emergency Stop Input:** Isolated EMG input for immediate motion halt while maintaining EtherCAT communication for status monitoring. - **Isolated Digital I/O:** - 4-channel isolated digital input (two configurable as pulsar inputs) - 4-channel isolated digital output (NPN sinking type, 24V, 90mA per channel) - **High-Speed Pulsar Input:** Supports CW/CCW and 1x/2x/4x AB phase modes up to 1 MHz input frequency. - **Advanced Motion Functions:** - Point-table functions for contouring applications - Up to 16D linear interpolation - 3D circular and 3D spiral interpolation - Helical interpolation and gantry synchronization - **Standalone Operation:** Supports up to 8 downloadable program tasks for independent operation without host PC intervention. - **Card ID Selection:** Hardware DIP switch (SW5) for card index configuration (0–15). - **Software Ecosystem:** Fully supported by ADLINK’s APS function library and MotionCreatorPro 2™ configuration utility. - **Robust Design:** Industrial-grade components with wide operating temperature range and high isolation voltage for reliable operation in harsh environments.

Hersteller: Adlink Technology Inc.

Kategorie: Motion Control / EtherCAT PCIe

- **PCI Express® x1 compliant** interface for high-speed data throughput and compatibility with modern PC-based control systems. - **Up to 64-axis motion control** and **10,000 I/O point control** via EtherCAT network. - **EtherCAT cycle times configurable down to 250 µs**, ensuring precise synchronization and minimal jitter. - **Dedicated emergency stop (EMG) input** for safety-critical applications. - **4-channel isolated digital input** and **4-channel isolated digital output**, with two inputs configurable as high-speed pulsar inputs. - **Pulsar input frequency up to 1 MHz**, supporting CW/CCW and 1x/2x/4x AB phase modes. - **Advanced motion interpolation:** up to 16D linear, 3D circular, and 3D spiral interpolation. - **Point-table functions** for contouring and continuous motion applications. - **8 downloadable program tasks** for standalone operation without host PC intervention. - **Card ID selection (SW5 DIP switch)** for multi-card system configuration. - **Broad compatibility** with third-party EtherCAT slave devices. - **Software support:** APS function library and MotionCreatorPro 2™ utility for configuration, programming, and diagnostics. - **Windows 7/10 (32/64-bit)** operating system support.

Hersteller: Adlink Technology Inc.

Kategorie: Motion Control / EtherCAT PCIe

- **PCI Express® x4 Interface:** Fully compliant with PCIe x4 specification, ensuring high‑bandwidth data transfer between the frame grabber and host memory. - **Dual‑Channel Camera Link® Support:** Simultaneous acquisition from two independent base‑configuration cameras or one medium‑configuration camera. - **PoCL™ (Power over Camera Link):** Supplies +12 V DC (max 1 A per channel) directly through the Camera Link connector, eliminating separate power cabling. - **High Data Throughput:** Supports image transfer rates up to 512 MB/s (dual base) or 320 MB/s (single medium). - **128 MB DDR SDRAM Buffer:** 200 MHz DDR memory for image acquisition buffering and smooth data streaming. - **Flexible Triggering and I/O:** 4 TTL digital I/O lines, 2 trigger inputs, 2 exposure outputs, and encoder inputs (RS‑422 A/B/Z). - **64‑bit Memory Addressing:** Compatible with modern 64‑bit operating systems and large memory spaces. - **Comprehensive Software Support:** Windows® XP/Vista (32/64‑bit) drivers, WDM driver package, and CamCreator™ configuration utility. - **Developer SDK:** Full API library for C/C++, C#, VB.NET, and Borland C++ Builder, including Camera Link serial communication functions. - **Compact Form Factor:** 167.65 mm × 111.15 mm PCB suitable for standard PCIe slots. - **Industrial Reliability:** Operating temperature 0 °C – 50 °C, humidity 5 – 90 % RH NC.

Hersteller: Adlink Technology Inc.

Kategorie: Frame Grabber

- **PCI Express® x4 Interface:** Fully compliant with PCIe x4 standard, ensuring high bandwidth and low latency data transfer. - **Dual-Channel Camera Link® Support:** Simultaneous acquisition from two independent base-configuration cameras or one medium-configuration camera. - **PoCL™ (Power over Camera Link):** Supplies +12 VDC (max 1 A per channel) directly through the Camera Link cable, with automatic detection and overcurrent protection. - **High-Speed Data Transfer:** Supports pixel clock rates up to 85 MHz and data throughput up to 512 MB/s (dual base) or 320 MB/s (single medium). - **Onboard Memory:** 128 MB of 200 MHz DDR SDRAM for image buffering and high-speed acquisition. - **64-bit Memory Addressing:** Supports large memory addressing for high-resolution imaging. - **Digital I/O and Triggering:** - 4 TTL digital inputs and 4 TTL digital outputs - 2 trigger inputs and 2 exposure outputs - RS-422 encoder input (A/B/Z phase) - **Software Support:** Compatible with Windows® XP/Vista (32/64-bit) and includes ADLINK’s CamCreator™ utility for camera configuration, testing, and debugging. - **API and SDK:** Comprehensive function library for C/C++, C#, VB.NET, and Borland C++ Builder. - **Compact Form Factor:** 167.65 mm (W) × 111.15 mm (L), suitable for standard PC chassis. - **Applications:** Ideal for machine vision, industrial inspection, medical imaging, and scientific research.

Hersteller: Adlink Technology Inc.

Kategorie: Frame Grabber

- **Dual 3G-SDI Input Channels:** Supports simultaneous capture of two independent 3G-SDI video streams. - **High-Resolution Video Capture:** Up to 1920×1080p at 60 fps, supporting 3G/HD/SD-SDI standards. - **Color Accuracy:** 12-bit 4:4:4 (1080i/60fps) and 10-bit 4:2:2 (1080p/60fps) color formats for superior image fidelity. - **Low Latency, Uncompressed Streaming:** Ensures real-time video acquisition without compression artifacts. - **Long-Distance Transmission:** Supports up to 100 meters over 75Ω coaxial cable without signal degradation. - **Integrated Audio Capture:** Two-channel embedded digital audio per SDI input. - **RS-485 and Digital I/O:** Two RS-485 ports and 4-channel digital input/output for external device control. - **DirectShow Compatibility:** Fully compliant with Microsoft DirectShow for seamless integration with Windows-based applications. - **Software Utility:** Bundled with ADLINK ViewCreator Pro™ for configuration, testing, and debugging without programming. - **LED Indicators:** Four status LEDs for signal detection and channel activity. - **PCI Express x4 Interface:** Compliant with PCIe Gen2 x4, compatible with x4, x8, and x16 slots. - **Environmental Robustness:** Wide operating temperature range and RoHS/WEEE compliance.

Hersteller: Adlink Technology Inc.

Kategorie: Frame Grabber

- **PCI Express x4 Compliant:** Fully compliant with PCI Express Base Specification Revision 1.1. - **High-Speed Data Transfer:** Supports IEEE 1394b (FireWire 800) with data rates of 100, 200, 400, and 800 Mb/s per port, totaling up to 3.2 Gbps across four channels. - **Four Independent IEEE 1394b Ports:** Each port supports screw-lock connectors for secure industrial connections. - **Isolated Digital I/O:** Four optically isolated digital inputs and four isolated digital outputs for external device interfacing. - **Programmable Trigger Outputs:** Four isolated TTL-level trigger outputs with adjustable delay (0–1000 ms) and pulse width (0.1–50 ms). - **FireWire Short-Circuit Protection:** Built-in protection circuitry ensures safe operation under fault conditions. - **4-Pin ATX Power Connector:** Provides external 12 V power for connected IEEE 1394b cameras. - **Status LEDs:** Four channel-specific LEDs indicate active IEEE 1394b connections. - **Industrial-Grade Isolation:** 1000 V isolation voltage for digital and trigger I/O channels. - **Software Support:** Compatible with Windows XP, XP Embedded, and Vista (32-bit). - **Compact Form Factor:** 129.5 mm (W) × 111.15 mm (L) PCIe card suitable for standard PC enclosures.

Hersteller: Adlink Technology Inc.

Kategorie: Frame Grabber

- **PCI Express x4 Compliant Interface:** Fully compliant with PCI Express Base Specification Revision 1.1, ensuring high bandwidth and compatibility with modern PC architectures. - **High-Speed Data Transfer:** Supports IEEE 1394b (FireWire 800) data rates up to **800 Mb/s per port**, with an aggregate throughput of **up to 3.2 Gb/s** across four channels. - **Four Independent IEEE 1394b Ports:** Each port supports 100, 200, 400, and 800 Mb/s transfer rates and is fully compliant with IEEE P1394b-2002, IEEE 1394a-2000, and IEEE 1394-1995 standards. - **Isolated Digital I/O and Trigger Channels:** Provides **four isolated digital inputs and four isolated digital outputs**, as well as **four isolated trigger inputs and four isolated trigger outputs**, all photo-coupled for electrical isolation and noise immunity. - **Programmable Trigger Outputs:** Each trigger output supports programmable delay (0–1000 ms, 1 ms steps) and pulse width (0.1–50 ms, 0.1 ms steps), with selectable polarity and enable control. - **Industrial-Grade Connectors:** Equipped with screw-lock IEEE 1394b connectors for secure industrial connections. - **Status LEDs:** Four front-panel LEDs indicate active channel connections for easy monitoring. - **Power Supply for Cameras:** Includes a **4-pin ATX 12 V connector** to supply power directly to connected IEEE 1394b cameras. - **Software and OS Support:** Compatible with **Windows XP, XP Embedded, and Windows Vista (32-bit)** platforms. Includes driver and function library for digital I/O and trigger control. - **Applications:** Ideal for **machine vision inspection**, **automatic optical inspection (AOI)**, **scientific imaging**, and **medical research instrumentation**.

Hersteller: Adlink Technology Inc.

Kategorie: Frame Grabber

- **High‑Speed Sampling:** Up to 80 MS/s per channel with simultaneous acquisition across four channels. - **High Resolution:** 16‑bit analog‑to‑digital conversion for superior signal fidelity. - **Wide Bandwidth:** 40 MHz analog input bandwidth supporting high‑frequency signal capture. - **Programmable Input Range:** ±0.5 V, ±1 V, ±5 V, or ±10 V ranges; ±10 V supported only at 1 MΩ input impedance. - **Selectable Input Impedance:** 50 Ω or 1 MΩ, software‑selectable per channel. - **Large Onboard Memory:** 1 GB shared acquisition memory for extended recording at full sampling rate. - **FPGA‑Based Digital Filtering:** Selectable 10 MHz or 20 MHz digital low‑pass filter. - **Scatter‑Gather DMA:** High‑speed, low‑latency data transfer to host memory without CPU overhead. - **Trigger Flexibility:** Supports software, analog, external digital, and SSI (System Synchronization Interface) triggers. - **Auto‑Calibration:** Fully automated offset and gain calibration using onboard precision reference voltages. - **Synchronization Support:** SSI interface for multi‑card synchronization; optional PLL module (PCIe‑9834P) for precise clock alignment. - **Software Ecosystem:** Drivers and SDKs for Windows and Linux; compatible with LabVIEW, MATLAB, and Visual Studio. - **Environmental Compliance:** RoHS and WEEE compliant; CE and FCC Class A certified.

Hersteller: Adlink Technology Inc.

Kategorie: A/D High Speed PCIe

- **High-Speed Sampling:** Up to 200 MS/s sampling rate for precise waveform capture. - **High Resolution:** 14-bit ADC resolution (1 in 16,384) for accurate signal representation. - **Input Range & Impedance:** ±1 V input range, 50 Ω input impedance, DC coupling. - **Wide Bandwidth:** 100 MHz (-3 dB) analog input bandwidth for high-frequency signal acquisition. - **PCI Express x4 Interface:** High-speed data transfer with dedicated bandwidth up to 400 MB/s. - **Scatter-Gather DMA:** Efficient, continuous data streaming without CPU overhead. - **Triggering Options:** Supports software and external digital triggers; programmable polarity and pulse width. - **Auto-Calibration:** Onboard reference circuit for automatic offset and gain calibration. - **Auxiliary Digital I/O:** 8-bit static DIO or 2-bit synchronous digital input (SDI) for mixed-signal applications. - **Software Support:** Compatible with Windows and Linux; drivers for LabVIEW, MATLAB, and DAQPilot. - **Compact PCIe Form Factor:** Standard short-length PCIe card (106.7 mm x 174.6 mm). - **Environmental Robustness:** Operates from 0°C to +50°C, 10–90% RH non-condensing. - **Certifications:** CE and FCC Class A compliant for EMC/EMI standards.

Hersteller: Adlink Technology Inc.

Kategorie: A/D High Speed PCIe

- **High-Speed Sampling:** Up to 200 MS/s per channel simultaneous sampling. - **High Resolution:** 14-bit analog-to-digital conversion for precise signal representation. - **Wide Bandwidth:** 90 MHz (-3 dB) analog input bandwidth for high-frequency signals. - **Flexible Input Ranges:** Programmable ±0.2 V, ±2 V, or ±10 V input voltage ranges. - **Dual Analog Inputs:** Two single-ended channels with software-selectable 50 Ω or 1 MΩ impedance. - **Large Onboard Memory:** 1 GB acquisition memory shared between channels. - **High-Speed Data Streaming:** Continuous data transfer up to 800 MB/s using scatter-gather DMA. - **Triggering Options:** Software, external digital, analog, and SSI (System Synchronized Interface) triggers. - **Multiple Trigger Modes:** Post-trigger, pre-trigger, middle-trigger, delayed-trigger, and re-trigger modes. - **Signal Averaging:** Onboard signal averaging for noise reduction and small-signal detection. - **Auto-Calibration:** Fully automatic calibration with onboard reference voltages (+5 V and +2.5 V). - **External Clocking:** Supports internal 200 MHz clock or external clock input (40–200 MHz). - **Synchronization:** SSI interface for multi-card synchronization (ACL-eSSI-2/3/4 cables). - **Software Compatibility:** Supports LabVIEW, MATLAB, Visual Studio, and ADLINK’s DAQPilot SDK. - **Operating Systems:** Windows XP/7/8 (x86/x64). - **Compliance:** CE and FCC Class A certified; RoHS and WEEE compliant.

Hersteller: Adlink Technology Inc.

Kategorie: A/D High Speed PCIe

- **High-Speed Sampling:** Up to 80 MS/s per channel with simultaneous acquisition across all four channels. - **High Resolution:** 12-bit analog-to-digital conversion for accurate signal representation. - **Wide Bandwidth:** 40 MHz analog input bandwidth supporting high-frequency signal capture. - **Large Onboard Memory:** 1 GB shared memory for extended recording durations at maximum sampling rates. - **Programmable Input Ranges:** ±0.5 V, ±1 V, ±5 V, and ±10 V ranges selectable via software. - **Selectable Input Impedance:** 50 Ω or 1 MΩ, software-configurable for flexible signal interfacing. - **Digital Filtering:** FPGA-based 10 MHz or 20 MHz digital filters for noise reduction and signal conditioning. - **Scatter-Gather DMA:** High-speed, low-overhead data transfer directly to host memory without CPU intervention. - **Triggering Flexibility:** Supports software, analog, external digital, and SSI (System Synchronization Interface) triggers. - **Synchronization Support:** Three synchronous digital inputs (SDI) and SSI bus for multi-card synchronization. - **Auto-Calibration:** Fully automated calibration with onboard precision voltage references. - **Software Support:** Compatible with Windows 7/8 (x86/x64) and Linux; SDKs for LabVIEW, MATLAB, C/C++, Visual Basic, and Visual Studio.NET. - **Environmental Compliance:** RoHS and WEEE compliant; CE and FCC Class A certified. - **Variant Option:** PCIe-9814P includes a PLL module for precise synchronization using an external 10 MHz reference clock.

Hersteller: Adlink Technology Inc.

Kategorie: A/D High Speed PCIe

- **High-Speed Sampling:** Up to 80 MS/s per channel with true simultaneous sampling across four analog inputs. - **High Resolution:** 12-bit analog-to-digital conversion for accurate signal representation. - **Wide Bandwidth:** 40 MHz analog input bandwidth suitable for high-frequency signal capture. - **Large Onboard Memory:** 1 GB shared acquisition memory enables long-duration recording at maximum sampling rates. - **Programmable Input Ranges:** ±0.5 V, ±1 V, ±5 V, and ±10 V ranges selectable via software. - **Selectable Input Impedance:** 50 Ω or 1 MΩ input impedance, software-configurable for flexible signal interfacing. - **Digital Filtering:** FPGA-based 10 MHz or 20 MHz digital low-pass filters for noise reduction and signal conditioning. - **PLL Synchronization (PCIe-9814P only):** Integrated PLL module allows precise synchronization with external reference clocks for multi-card or system-level timing alignment. - **Triggering Flexibility:** Supports software, analog, external digital, and SSI (System Synchronization Interface) triggers with multiple trigger modes (pre-, post-, delay-, and middle-trigger). - **Scatter-Gather DMA:** High-speed data streaming to host memory with minimal CPU overhead, supporting large continuous or segmented data transfers. - **Synchronous Digital Inputs (SDI):** Three digital input lines sampled synchronously with analog channels for mixed-signal acquisition. - **Auto-Calibration:** Fully automated onboard calibration with EEPROM-stored constants for long-term accuracy. - **Software Support:** Compatible with Windows 7/8 (x86/x64) and Linux; drivers and SDKs available for LabVIEW, MATLAB, C/C++, Visual Basic, and Visual Studio.NET. - **Environmental Compliance:** RoHS and WEEE compliant, CE and FCC Class A certified.

Hersteller: Adlink Technology Inc.

Kategorie: A/D High Speed PCIe

- **High‑Speed Sampling:** Up to 80 MS/s per channel with simultaneous acquisition across all four channels. - **High Resolution:** 16‑bit analog‑to‑digital conversion for superior dynamic range and precision. - **Wide Bandwidth:** 40 MHz analog input bandwidth supporting high‑frequency signal capture. - **Large Onboard Memory:** 1 GB shared memory for extended recording durations at full sampling rate. - **Programmable Input Ranges:** ±0.5 V, ±1 V, ±5 V, or ±10 V ranges, software‑selectable. - **Selectable Input Impedance:** 50 Ω or 1 MΩ, software‑configurable for flexible signal interfacing. - **Digital Filtering:** FPGA‑based 10 MHz or 20 MHz digital low‑pass filter options. - **Scatter‑Gather DMA:** High‑speed, continuous data streaming with minimal CPU overhead. - **Triggering Flexibility:** Supports software, analog, external digital, and SSI (System Synchronization Interface) triggers. - **Auto‑Calibration:** Fully automated offset and gain calibration using onboard precision references. - **Synchronization Support:** PLL module (in PCIe‑9834P variant) for precise multi‑card synchronization. - **Software Ecosystem:** Compatible with ADLINK WD‑DASK, LabVIEW, MATLAB, and Visual Studio environments. - **Operating System Support:** Windows XP/7/8/10 (x86/x64) and Linux. - **Environmental Compliance:** RoHS and WEEE compliant; CE and FCC Class A certified.

Hersteller: Adlink Technology Inc.

Kategorie: A/D High Speed PXI/PXIe

- **High-Speed Sampling:** Up to 80 mega-samples per second (MS/s) per channel. - **High Resolution:** 16-bit analog-to-digital conversion for superior signal fidelity. - **Four Simultaneous Channels:** True simultaneous sampling across all four analog inputs with no inter-channel phase delay. - **Wide Bandwidth:** 40 MHz analog input bandwidth for high-frequency signal acquisition. - **Programmable Input Range:** ±0.5 V, ±1 V, ±5 V, or ±10 V, selectable via software. - **Selectable Input Impedance:** 50 Ω or 1 MΩ, software-configurable for flexible signal interfacing. - **Onboard Memory:** 1 GB shared acquisition memory for extended recording durations. - **Digital Filtering:** FPGA-based 10 MHz or 20 MHz digital low-pass filter options. - **PLL Synchronization Module:** Provides precise clock synchronization across multiple cards (exclusive to PCIe-9834P). - **Scatter-Gather DMA:** High-speed, CPU-independent data transfer for continuous streaming. - **Triggering Flexibility:** Supports software, analog, external digital, and SSI (System Synchronization Interface) triggers. - **Clock Sources:** Internal, external, or external reference clock (REF_CLK) for flexible timing control. - **Auto-Calibration:** Fully automated calibration with onboard precision voltage references. - **Software Support:** Compatible with WD-DASK, LabVIEW, MATLAB, and Visual Studio environments. - **Operating System Support:** Windows XP/7/8/10 (x86/x64) and Linux. - **Environmental Compliance:** RoHS and WEEE compliant; CE and FCC Class A certified.

Hersteller: Adlink Technology Inc.

Kategorie: A/D High Speed PCIe

- **PCI Express x4 Interface:** High-bandwidth serial interconnect for fast image data transfer. - **Camera Link Compatibility:** Supports one channel Base, Medium, or Full configuration Camera Link cameras. - **High-Speed Data Transfer:** Up to 640 MB/s per channel throughput. - **Pixel Clock Rate:** Supports acquisition pixel clock rates up to 85 MHz. - **Onboard Memory:** 128 MB of 200 MHz DDR SDRAM for image buffering and DMA operations. - **FPGA-Based Design:** Provides flexible image acquisition, pre-processing, and real-time control. - **Trigger and Encoder Support:** - Programmable TTL/RS-422 line/page triggers. - RS-422 A/B/Z phase encoder input with up/down counter. - TTL digital I/O for external control. - **External Communication:** RS-232 serial port for camera control and configuration. - **Comprehensive Software Support:** - Windows XP/XP Embedded compatibility. - API libraries for VC++ 6.0, VB 6.0, and Borland C++ Builder 6.0. - **Utility Software:** CamCreator utility for camera configuration, testing, and debugging. - **RoHS Compliant:** Environmentally friendly design meeting EU directives. - **LED Indicators:** Status LEDs for DMA, FIFO, and PCIe lane activity.

Hersteller: Adlink Technology Inc.

Kategorie: Frame Grabber

- **Dual Gigabit Ethernet Ports:** Two fully integrated Gigabit Ethernet MAC/PHY ports supporting 10/100/1000 Mbps operation. - **Power over Ethernet (PoE):** IEEE 802.3af compliant, delivering up to 15.4 W per channel at 48 VDC, eliminating the need for external power supplies for cameras. - **PCI Express x4 Interface:** High-speed PCIe x4 bus interface ensures up to 1 GB/s per channel data throughput. - **Link Aggregation Support:** Enables dual-port bonding for increased bandwidth and redundancy. - **Jumbo Frame Support:** Handles jumbo frames up to 9.5 KB for efficient large image transfers. - **Onboard Memory Buffer:** 128 MB DDR RAM buffer for stable, high-speed image acquisition. - **Isolated Digital I/O:** Two isolated digital inputs and outputs for external device control and synchronization. - **Programmable Trigger Outputs:** Two isolated trigger outputs with adjustable delay, width, and polarity for precise timing control. - **Industrial-Grade Connectors:** Two RJ-45 ports with screw-lock connectors for secure camera connections. - **Compact Form Factor:** 129.5 mm (W) × 111.15 mm (L) PCB size suitable for standard PC enclosures. - **Environmental Robustness:** Operating temperature range of 0°C to 55°C and humidity tolerance up to 90% RH non-condensing. - **Software Development Kit (SDK):** Comprehensive API library supporting C++, C#, and Visual Basic for custom application development.

Hersteller: Adlink Technology Inc.

Kategorie: Frame Grabber

- **Dual Independent Gigabit Ethernet Ports:** Two fully integrated Gigabit Ethernet MAC and PHY interfaces supporting IEEE 802.3, 802.3u, and 802.3ab standards for 10/100/1000 Mbps operation. - **PCI Express x4 Interface:** Compliant with PCI Express x4 specification, ensuring high bandwidth and low latency data transfer between the host system and connected cameras. - **High Data Throughput:** Supports data transfer rates up to 1 GB/s per channel, suitable for high-resolution, high-frame-rate imaging. - **Jumbo Frame Support:** Capable of handling jumbo frames up to 9 KB, improving efficiency in large image data transfers. - **Isolated Digital I/O:** Includes 2 isolated digital inputs and 2 isolated digital outputs for external device control and synchronization. - **Programmable Triggering:** Two isolated trigger inputs and two isolated trigger outputs with programmable delay, pulse width, and polarity for precise timing control. - **Industrial-Grade Design:** Equipped with screw-lock RJ-45 connectors for secure cable attachment in industrial environments. - **Onboard Memory Buffer:** Integrated 128 MB DDR RAM buffer for stable and reliable data streaming. - **Software Support:** Compatible with Windows XP, XP Embedded, and Vista operating systems. Includes driver and function library for easy integration. - **Compact Form Factor:** Dimensions of 129.5 mm (W) × 111.15 mm (L) suitable for standard PC chassis.

Hersteller: Adlink Technology Inc.

Kategorie: Frame Grabber

- **Four Independent Gigabit Ethernet Ports:** Supports simultaneous connection of up to four GigE Vision cameras for high-speed image acquisition. - **Power over Ethernet (PoE):** IEEE 802.3af compliant, delivering up to 15.4 W per channel at 48 VDC, eliminating the need for separate power supplies for cameras. - **High Data Throughput:** Each channel supports up to 1 Gb/s transfer rate, with total bandwidth exceeding 4 Gb/s when aggregated. - **PCI Express x4 Interface:** Ensures high-speed data transfer between the frame grabber and host system, compliant with PCIe v1.1 (2.5 GT/s). - **IEEE 1588 Synchronization:** Enables precise multi-camera synchronization for time-critical imaging applications. - **Link Aggregation Support:** Allows combining multiple ports for increased bandwidth and redundancy. - **Jumbo Frame Support:** Handles jumbo frames up to 9.5 kB for efficient large-packet data transmission. - **Integrated PoE Protection:** Includes inrush current control, current limiting, and short-circuit protection for reliable operation. - **Status Indicators:** Four dedicated LEDs indicate PoE status for each port. - **Compact Form Factor:** Dimensions of 168 mm (W) × 111.15 mm (L) suitable for standard PCIe slots. - **Environmental Compliance:** Fully RoHS and WEEE compliant, ensuring eco-friendly design and disposal.

Hersteller: Adlink Technology Inc.

Kategorie: Frame Grabber

- **PCI Express® x4 Interface:** Fully compliant with PCIe v2.1 (2.5 GT/s) for high-bandwidth data transfer. - **Dual Independent Gigabit Ethernet Ports:** Two fully integrated MAC/PHY ports supporting up to 1 Gb/s per channel. - **IEEE 802.3at PoE+ Support:** Provides up to 30W per port, enabling direct power delivery to connected cameras or devices. - **Comprehensive PoE Protection:** Safeguards against overvoltage, undervoltage, overcurrent, and overheating. - **Smart PoE Power Management:** Automatic power budget control, programmable PoE on/off switching, and real-time monitoring via SDK and utility. - **Jumbo Frame Support:** 9 KB jumbo frame capability for efficient large-packet data transfer. - **IEEE 1588 PTP Hardware Support:** Enables precise time synchronization across networked devices. - **Multi-Card and Multi-Camera Support:** Multiple PCIe-GIE7x cards can operate simultaneously in a single system without I/O conflicts. - **Wide Operating Temperature Range:** 0°C to +70°C for reliable operation in industrial environments. - **PoE Power Options:** Up to 20W from PCIe slot, 61.6W from 4-pin or 6-pin Molex connector, and up to 120W (PCIe-GIE74 PRO only) when both connectors are used. - **Software Compatibility:** Supports Windows® 7/8.1/10 with APIs for C#, VB.NET, and VC++. - **Optional PRO Features:** Trigger over Ethernet (ToE) for synchronized multi-camera acquisition and integrated software license management.

Hersteller: Adlink Technology Inc.

Kategorie: Frame Grabber

- **PCI Express® x4 Interface:** Fully compliant with PCIe Gen2 x4, ensuring high data throughput and compatibility with modern industrial PCs. - **Dual Independent Gigabit Ethernet Ports:** Supports two fully integrated Gigabit Ethernet MAC and PHY ports for simultaneous multi-camera operation. - **PoE+ (Power over Ethernet Plus):** IEEE 802.3at compliant, delivering up to 30W per port for powering cameras directly through Ethernet cables. - **Comprehensive PoE Protection:** Built-in overcurrent and overvoltage protection with automated power budget control to safeguard connected devices. - **Smart PoE Management Utility:** Real-time monitoring and control of PoE power status via an intuitive software utility and API, enabling predictive maintenance and power prioritization. - **Trigger over Ethernet (ToE):** FPGA-based hardware synchronization for multi-camera triggering using Ethernet Action Commands (PRO models only). - **Software License Management:** Integrated license management system for secure software activation and deployment (PRO models only). - **High-Speed Data Transfer:** Supports up to **1 GB/s per channel** with **9 kB jumbo frame** capability for efficient large image data transmission. - **DDR RAM Buffer:** Equipped with **128 MB DDR RAM** for stable frame buffering and non-drop frame capture. - **Wide Operating Temperature Range:** Operates reliably from **0°C to +70°C**, suitable for fanless and rugged industrial systems. - **Multi-Card Support:** Multiple PCIe-GIE7x cards can be installed in a single system without occupying additional I/O resources, enabling scalable multi-camera setups. - **IEEE 1588 PTP Support:** Hardware-based Precision Time Protocol synchronization for precise timing across networked devices. - **Compact Design:** Small form factor (167.6 mm x 106.6 mm) suitable for space-constrained industrial PCs. - **Industrial-Grade Reliability:** Designed for continuous operation in harsh environments with humidity tolerance from 5% to 90% RH (non-condensing).

Hersteller: Adlink Technology Inc.

Kategorie: Frame Grabber

- **PCI Express® x4 Compliant:** Fully compatible with PCIe v2.1 (2.5 GT/s) interface, ensuring high data throughput and low latency. - **Four Independent Gigabit Ethernet Ports:** Each port supports up to 1 Gb/s data transfer rate, enabling simultaneous multi-camera operation. - **IEEE 802.3at PoE+ Support:** Provides up to 30W per port, delivering both power and data over a single Ethernet cable. - **Comprehensive PoE Protection:** Safeguards against overvoltage, undervoltage, overcurrent, and overheating. - **Automated Power Budget Control:** Dynamically allocates available power based on source and port priority. - **Smart PoE Management Utility and API:** Real-time monitoring and control of PoE status, power consumption, and port configuration. - **Multi-Card Support:** Multiple PCIe-GIE7x cards can be installed in a single system for large-scale vision setups. - **Wide Operating Temperature Range:** 0°C to +70°C for 60W operation; 0°C to +40°C for 120W operation. - **IEEE 1588 Precision Time Protocol (PTP):** Hardware-based synchronization for precise timing across devices. - **Trigger over Ethernet (ToE):** (PRO models only) Enables hardware-level synchronization of multiple cameras. - **Software License Management:** (PRO models only) Integrated EEPROM for secure software licensing without external dongles. - **Jumbo Frame Support:** 9 kB jumbo frames for efficient large-packet data transmission. - **Link Aggregation:** Supports network redundancy and bandwidth aggregation. - **PoE Power Source Flexibility:** Power can be drawn from PCIe slot, 4-pin, or 6-pin Molex connectors. - **LED Indicators:** Provide visual feedback for link, activity, and PoE status. - **Compatibility:** Windows® 7/8.1/10; supports C#, VB.NET, and VC++ development environments.

Hersteller: Adlink Technology Inc.

Kategorie: Frame Grabber

- **PCI Express® x4 Compliant:** Fully compatible with PCIe Gen2 x4 interface, ensuring high bandwidth and low latency data transfer. - **Four Independent Gigabit Ethernet Ports:** Each port supports up to 1 Gb/s throughput for simultaneous multi-camera operation. - **IEEE 802.3at PoE+ Support:** Provides up to 30W per port, enabling direct power delivery to cameras and other PoE devices. - **Comprehensive PoE Protection:** Built-in overvoltage, undervoltage, overcurrent, and overtemperature protection mechanisms safeguard connected devices. - **Smart PoE Power Management:** Automatic power budget control, programmable PoE on/off switching, and real-time monitoring via SDK and utility. - **Trigger over Ethernet (ToE):** FPGA-based hardware synchronization for multi-camera triggering with minimal latency (PRO models only). - **Software License Management:** Integrated secure EEPROM for software licensing, eliminating the need for external dongles (PRO models only). - **IEEE 1588 PTP Hardware Support:** Enables precise time synchronization across multiple cameras and devices. - **Jumbo Frame Support:** 9 kB jumbo frame capability for efficient large-packet data transmission. - **Multi-Card Scalability:** Supports installation of multiple PCIe-GIE7x cards in a single system for large-scale vision setups. - **Wide Operating Temperature Range:** 0°C to +70°C operation ensures reliability in industrial environments. - **PoE Power Source Flexibility:** Power can be drawn from PCIe slot, 4-pin, or 6-pin Molex connectors, supporting up to 120W total PoE output. - **Software Compatibility:** Supports Windows® 7/8.1/10 with APIs for C#, VB.NET, and VC++.

Hersteller: Adlink Technology Inc.

Kategorie: Frame Grabber

- **Integrated PoE+ Expansion:** Incorporates the Neousys PCIe‑PoE352at card, enabling multiple IEEE 802.3at (25.5 W per port) PoE+ outputs for high‑power network devices. - **Patented Expansion Cassette Design:** Utilizes Neousys’ proprietary cassette system that isolates thermal loads from the main system, ensuring stable fanless operation. - **Back‑to‑Back Thermal Heat Sink:** Dual‑sided heat dissipation structure enhances thermal efficiency and reliability under continuous industrial workloads. - **Smart Fan Option:** Includes a compact active cooling fan (Fankit‑25) for high‑temperature or high‑load applications, maintaining optimal thermal balance. - **Fanless Operation Range:** Supports fanless operation from 0 °C to 55 °C ambient temperature when installed in Nuvo‑2500E systems. - **Rugged Embedded Integration:** Designed for harsh industrial environments, vibration‑resistant, and compliant with IEC60068‑2‑64 and IEC60068‑2‑27 standards. - **Seamless Compatibility:** Fully compatible with Nuvo‑2500E embedded controllers featuring Intel® Celeron® J1900 processors and PCIe x4 expansion slots. - **High‑Efficiency Power Delivery:** Supports 8–35 V DC input range through the host system, ensuring stable PoE power sourcing. - **Compact Modular Design:** Maintains the Nuvo‑2500E’s compact footprint (205 × 145 × 73 mm) while adding advanced networking capabilities.

Hersteller: Neousys Technology

Kategorie: Nuvo-2000-Series and others

- **Integrated PCIe‑PoE354at Card:** Provides four IEEE 802.3at (PoE+) Gigabit Ethernet ports capable of delivering up to 25.5 W per port. - **Neousys Patented Expansion Cassette:** Mechanically isolates the add‑on card from the main system to minimize thermal interference and simplify maintenance. - **Back‑to‑Back Thermal Heat‑Sink Design:** Dual‑sided heat dissipation structure ensures stable fanless operation up to 55 °C ambient temperature. - **Smart Fan Option:** Optional active cooling fan (Fankit‑25) for extended thermal headroom in high‑load or enclosed installations. - **Rugged Industrial Design:** Engineered for vibration, shock, and temperature extremes typical of embedded and automation environments. - **Plug‑and‑Play Integration:** Fully compatible with Nuvo‑2500E embedded controllers; recognized automatically through the PCIe x4 slot (Gen 2, x1 signal). - **High‑Efficiency Power Delivery:** Supports IEEE 802.3at PSE (Power Sourcing Equipment) standard with intelligent power management and overload protection. - **Compact Form Factor:** Maintains the Nuvo‑2500E’s small footprint (205 × 145 × 73 mm) while adding advanced PoE networking capability. - **Fanless Reliability:** Operates silently and without moving parts in ambient temperatures from 0 °C to 55 °C when installed in the Nuvo‑2500E cassette.

Hersteller: Neousys Technology

Kategorie: Nuvo-2000-Series and others