LOOKING FOR THE RIGHT

INDUSTRIAL SOLUTION?

Discover embedded, communication and automation solutions tailored to your application.

Ethernet - Serial Over IP

Serial Over IP is a network protocol that allows Ethernet-based devices to be connected over a network. It is a method of transmitting serial data over an IP network, allowing for remote access and control of devices. It is an ideal solution for connecting multiple devices over a wide area network.

Subcategories

4.4.1 - (Industrial Device Server) Industrial device servers, gateways and I/O modules for connecting distributed devices.
4.4.1.1 - (Serial Gateway: USB LoRa Bluetooth Repeater) Gateways, converters and repeaters for serial, USB and wireless device connections.
4.4.1.1.1 - (Gateway serial USB LoRa Bluetooth Repeater) Communication modules for connecting serial devices through USB and wireless interfaces.
4.4.1.1.2 - (Gateway Ethernet) Ethernet gateways for exchanging data between field devices and higher-level networks.
4.4.1.1.3 - (Bluetooth Gateway) Bluetooth gateways for wireless connection of compatible devices and sensor systems.
4.4.1.1.4 - (Gateway LoRaWAN) LoRaWAN gateways for connecting compatible wireless devices to IoT networks.
4.4.1.1.5 - (Gateway Wireless) Wireless gateways for integrating wireless device links into industrial communication systems.
4.4.1.1.6 - (Repeater RS485) RS-485 repeaters for extending and segmenting serial bus connections.
4.4.1.1.7 - (Converter) Interface converters for connecting industrial devices with different communication interfaces.
4.4.1.1.8 - (USB Converter) USB converters for connecting compatible serial devices to industrial computer systems.
4.4.1.2 - (RS485 RS422) RS-422/RS-485 modules for distributed measurement, control and communication tasks.
4.4.1.2.1 - (Module AD In) Analogue input modules for distributed measurement acquisition over serial communication links.
4.4.1.2.2 - (Module AD Out) Analogue output modules for distributed setpoint output over serial communication links.
4.4.1.2.3 - (Module AD DIO) I/O modules for combined analogue measurement and digital signal processing tasks.
4.4.1.2.4 - (Module Relay DIO) Digital I/O and relay modules for distributed acquisition and output of switching signals.
4.4.1.2.5 - (Module Counter) Counter modules for distributed acquisition of pulses and events over serial connections.
4.4.1.3 - (Modbus Modules) Modbus modules for integrating distributed measurement and I/O signals into industrial controllers.
4.4.1.3.1 - (Modbus AD In) Analogue Modbus input modules for acquiring sensor signals and process measurements.
4.4.1.3.2 - (Modules Analog Out) Analogue Modbus output modules for distributed output of industrial setpoints and control signals.
4.4.1.3.3 - (Modules Digital IO) Digital Modbus I/O modules for distributed processing of switching and status signals.
4.4.1.3.4 - (Modules Relay) Modbus relay modules for distributed control of electrical switching functions.
4.4.1.3.5 - (Modules Counter) Modbus counter modules for acquiring pulses and events in automation systems.
4.4.1.4 - (Modbus DOS Modules) Embedded DOS modules for compatible industrial communication and control applications.
4.4.1.4.1 - (Modules RS485/RS232) RS-232/RS-485 modules for serial connectivity in compatible embedded and control systems.
4.4.1.4.2 - (Modules addressable RS485/RS232) Addressable RS-232/RS-485 modules for targeted communication with serial devices.
4.4.1.4.3 - (Modules Ethernet/RS485/RS232) Communication modules for linking Ethernet networks with RS-232 and RS-485 devices.
4.4.1.4.4 - (Modules Ethernet/Modbus) Ethernet/Modbus modules for connecting industrial devices to higher-level data networks.
4.4.1.5 - (Modbus AIO / DIO) Modbus I/O modules for analogue and digital signals in distributed automation systems.
4.4.1.5.1 - (Modbus TCPIP DIO) Digital Modbus TCP I/O modules for acquiring and outputting signals over Ethernet.
4.4.1.5.2 - (2*Ethernet Modbus-TCP DIO) Digital Modbus TCP I/O modules with two Ethernet ports for industrial network integration.
4.4.1.5.3 - (USB/RS485/Ethernet w Multi I/O) Multifunction I/O modules with USB, RS-485 or Ethernet connectivity for distributed measurement and control.
4.4.2 - (Industrial Device Server) Industrial device servers for integrating serial devices into Ethernet-based communication systems.
4.4.3 - (RS232) RS-232 components for connecting serial peripherals to industrial communication systems.
4.4.4 - (Serial Over IP RS232/485) Serial over IP devices for accessing RS-232 and RS-485 interfaces over Ethernet.
4.4.5 - (Modbus Gateways) Modbus gateways for connecting different Modbus networks and transmission media.

Products

353 products

No. Code Product Price Quantity
4.4.5 Isolated Dual Port Modbus-/Serial-Ethernet Gateway IMG-120T
Isolated Dual Port Modbus-/Serial-Ethernet Gateway

- **Dual Serial Interfaces:** Two RS422/RS485 ports with 5-contact terminal blocks, supporting both 4-wire RS422 and 2-wire RS485 configurations. - **Ethernet Connectivity:** One 10/100BASE-TX RJ45 port compliant with IEEE 802.3/802.3u standards, supporting auto-negotiation and auto-MDI/MDI-X. - **Protocol Conversion:** Acts as a transparent bridge between Modbus TCP/IP and Modbus RTU/ASCII protocols, supporting RTU Master/Slave and ASCII Master/Slave modes. - **Flexible Operation Modes:** - Master mode supports up to 32 slave TCP connection requests. - Slave mode supports up to 16 TCP master connections. - **High Data Rate:** Configurable baud rate from 300 bps to 115,200 bps with non-blocking communication. - **Industrial-Grade Design:** IP40-rated metal housing, wall-mountable, with 1 kV surge protection on serial lines. - **Wide Power Input Range:** 9–48 VDC via 2-contact terminal block, with low power consumption (~1.25 W @ 9 VDC). - **Comprehensive Management:** - Web-based GUI and Telnet management interfaces. - PLANET Modbus Gateway Utility and Smart Discovery Utility for device discovery, configuration, and firmware management. - **Security and Access Control:** IP/MAC filtering, user authentication, and configurable access permissions. - **Environmental Resilience:** Operates reliably in extreme industrial conditions (-40°C to +75°C, 5–95% RH non-condensing). - **Compliance:** Meets FCC Part 15 Class B, CE, and IEC60068-2-32/27/6 standards for free fall, shock, and vibration.

Manufacturer: Planet

Category: Modbus Gateways

Request a quote
4.4.5 Modbus TCP to RTU/ASCII Gateway with Watchdog TRP-C37M
Modbus TCP to RTU/ASCII Gateway with Watchdog

- **Multi-Protocol Gateway:** Converts Modbus TCP to Modbus RTU or ASCII, supporting both TCP Master-to-Serial Slave and TCP Slave-to-Serial Master configurations. - **Flexible Operation Modes:** Operates in Direct IP Mode, Virtual COM Mode, and Paired Mode for diverse network topologies. - **High Reliability:** Built-in watchdog timer automatically resets the system in case of software or power failure. - **Industrial Protection:** Surge, overcurrent, and overvoltage protection on RS-422/485 lines; ±15 kV ESD protection on serial interfaces. - **Wide Power Input Range:** Accepts DC +10V to +30V via screw terminal or DC jack. - **Auto-MDIX Ethernet Port:** Supports 10/100 Mbps auto-detecting Ethernet with automatic crossover correction. - **High-Speed Serial Communication:** Baud rates from 1200 to 921,600 bps with hardware-based RS-485 direction control. - **Multi-Client Connectivity:** Supports up to 16 simultaneous TCP client connections in server mode. - **Heart Beat Function:** Periodic connection check ensures communication reliability and automatic reconnection after network or power interruptions. - **Easy Configuration:** Configurable via DSM utility, web interface, or serial console; firmware upgradable via LAN. - **Compatibility:** Works with Modscan32, Modbus Poll, CAS Modbus Scanner, SCADA systems, and Trycom’s TRPCOM utility. - **External Reset Switch:** Allows quick restoration to factory defaults in case of configuration or password loss. - **Dual Power Input Options:** Selectable between screw terminal and DC jack (5.5 × 2.1 mm plug).

Manufacturer: Trycom

Category: Modbus Gateways

188,00 EUR (w/o VAT)
4.4.5 Modbus TCP to RTU/ASCII Gateway with Remote Monitoring TRP-C37MA
Modbus TCP to RTU/ASCII Gateway with Remote Monitoring

- **Modbus Protocol Conversion:** Converts between Modbus TCP and Modbus RTU/ASCII seamlessly. - **Remote Monitoring Function:** Supports automatic and manual monitoring modes for serial devices. - *Automatic Mode:* Monitors a pulse signal from the serial device every 30 seconds; if no pulse is detected, the relay activates automatically. - *Manual Mode:* Relay can be triggered manually via the web interface to restart or control the connected device. - **Relay Control:** Two independent relays (NC, COM, NO) with adjustable latch time (1–255 units, 100 ms per unit). - **Web-Based Configuration:** Full configuration and monitoring through an integrated HTTP web server. - **Virtual COM Port Support:** Provides virtual COM drivers for Windows 98 through Windows 10, supporting Server, Client, and UDP modes. - **Network Security:** Allows configuration of up to 8 authorized host IP addresses to restrict access. - **High Connectivity:** Supports up to 16 simultaneous TCP client connections in server mode. - **Auto-MDIX Ethernet Port:** Automatically detects and corrects cable crossover, supporting both straight-through and crossover cables. - **Watchdog and Power Detection:** Built-in watchdog timer and power input detection circuit ensure system stability and automatic recovery from faults. - **Surge and ESD Protection:** ±15 kV ESD protection on serial interfaces; surge, overcurrent, and overvoltage protection on RS-422/485 lines. - **Heartbeat Function:** Periodic TCP heartbeat (port 5300) every 5 seconds to verify network connectivity. - **Firmware Upgradeable:** Supports firmware updates via LAN. - **Dual Power Input:** Selectable between screw terminal and DC jack input. - **LED Indicators:** Power, Link, UART RX/TX, Digital Input (DI), and Relay Output (DO) status LEDs. - **Auto Reconnection:** Automatically reconnects after power or Ethernet failure. - **Factory Reset:** External DIP switch allows quick restoration to factory defaults.

Manufacturer: Trycom

Category: Modbus Gateways

210,00 EUR (w/o VAT)