Comprehensive Product Summary – ORing IES-A1062FX-MM-SC Industrial Ethernet Switch

---

### 1. Product Overview

Product Name: ORing IES-A1062FX-MM-SC
Model Number: IES-A1062FX-MM-SC
Series: IES-A1 Series (Industrial Ethernet Switches)
Article Number: IES-A1062FX-MM-SC
Manufacturer: ORing Industrial Networking Corp.
Drawing Number: IES-A1 Series
Revision: v1.0
Revision Date: 2013-11-27
Product Type: Oil & Gas Industrial Unmanaged Ethernet Switch
Certifications: Class I Division 2 (C1D2), ATEX Class 1 Zone 2 certified

The ORing IES-A1062FX-MM-SC is an unmanaged industrial Ethernet switch designed for hazardous and harsh environments such as oil and gas facilities, refineries, and chemical plants. It belongs to ORing’s IES-A1 series, a family of ruggedized switches engineered for reliable operation in environments requiring CID2 and ATEX compliance. The unit provides a combination of copper and fiber ports, redundant power inputs, and a wide operating temperature range, ensuring continuous network connectivity in mission-critical applications.

---

### 2. Key Features

- Hazardous Location Certification: Fully compliant with CID2 (Class I Division 2) and ATEX Class 1 Zone 2 standards for use in explosive or hazardous industrial environments.
- Port Configuration:
- 6 × 10/100Base-T(X) RJ45 ports (Auto MDI/MDI-X)
- 2 × 100Base-FX fiber ports (Multi-mode, SC connectors)
- Fiber Optics: Multi-mode fiber operation with 1310 nm wavelength, supporting up to 2 km transmission distance.
- Triple Redundant Power Inputs:
- Two terminal block inputs (12–48 VDC)
- One DC power jack input (12–45 VDC)
- Automatic failover ensures uninterrupted operation during power source failure.
- Wide Temperature Range: Operates reliably from –40°C to +70°C, suitable for extreme industrial conditions.
- Rugged Construction: IP30-rated metal enclosure for mechanical protection and electromagnetic shielding.
- Mounting Flexibility: Supports both DIN-rail and wall-mount installation.
- Surge and ESD Protection: Built-in surge suppression and electrostatic discharge protection for enhanced reliability.
- LED Indicators: Comprehensive LED panel for power, fault, and port link/activity status.
- Low Power Consumption: Typical consumption of 8 Watts.
- High Reliability: Store-and-forward switching architecture with 8192 MAC address table.
- Maintenance-Free Operation: Unmanaged design eliminates configuration complexity, ideal for plug-and-play deployment.

---

### 3. Technical Specifications

Physical Characteristics:
- Dimensions: 52 mm (W) × 106 mm (D) × 144 mm (H)
- Equivalent: 2.05 × 4.17 × 5.67 inches
- Weight: Approximately 680 g
- Enclosure: IP30-rated metal housing
- Mounting Options: DIN-rail and wall-mount compatible

Power Requirements:
- Input Voltage:
- Terminal Block: 12–48 VDC
- Power Jack: 12–45 VDC (not for use in hazardous locations)
- Power Consumption: 8 W (typical)
- Protection:
- Overload current protection
- Reverse polarity protection
- Triple redundant DC inputs

Environmental Conditions:
- Operating Temperature: –40°C to +70°C (–40°F to +158°F)
- Storage Temperature: –40°C to +85°C (–40°F to +185°F)
- Operating Humidity: 5% to 95% (non-condensing)

Fiber Optic Specifications:
- Connector Type: SC
- Mode: Multi-mode
- Core/Cladding Diameter: 62.5/125 µm or 50/125 µm
- Wavelength: 1310 nm
- Transmission Distance: Up to 2 km
- Optical Power:
- Max Output: –14 dBm
- Min Output: –23.5 dBm
- Receiver Sensitivity: –31 dBm
- Link Budget: 7.5 dB

Ethernet Standards:
- IEEE 802.3 (10Base-T)
- IEEE 802.3u (100Base-TX, 100Base-FX)
- IEEE 802.3x (Flow Control)

Switching Performance:
- MAC Address Table: 8192 entries
- Switching Method: Store-and-forward
- Flow Control: IEEE 802.3x compliant

---

### 4. Functionality

The IES-A1062FX-MM-SC functions as an unmanaged Ethernet switch, automatically detecting and forwarding Ethernet frames between connected devices. It supports auto-negotiation and auto-MDI/MDI-X, allowing seamless connection to various Ethernet devices without manual configuration.

Typical Use Cases:
- Oil and gas production facilities
- Petrochemical plants
- Offshore platforms
- Industrial automation systems
- SCADA and control networks
- Hazardous area monitoring systems

Applications:
- Connecting Ethernet I/O modules, PLCs, and industrial PCs
- Linking IP cameras and remote monitoring devices
- Extending network reach via fiber optic connections
- Providing redundant power and network reliability in mission-critical systems

Compatibility:
- Compatible with standard Ethernet devices supporting 10/100 Mbps speeds
- Supports both copper and fiber network segments
- Integrates easily into existing industrial Ethernet infrastructures

---

### 5. Components & Accessories

Included Items:
1. Main Unit: IES-A1062FX-MM-SC switch
2. DIN-Rail Mounting Kit (45 mm)
3. 7-Pin Terminal Block Connector
4. Wall-Mounting Kit
5. Dust Covers (RJ45): 6 pieces
6. Screws (M3×5): 6 pieces
7. Quick Installation Guide (QIG)

Optional Accessories:
- Additional DIN-rail brackets
- Fiber patch cables (SC multi-mode)
- Power supply units (12–48 VDC industrial-grade)

Connectors:
- RJ45 Ports: 6 × 10/100Base-T(X), Auto MDI/MDI-X
- Fiber Ports: 2 × 100Base-FX, SC-type multi-mode
- Power Input: 7-pin terminal block and DC power jack

---

### 6. Installation & Setup

Installation Requirements:
- Must be installed in an ATEX-certified IP54 enclosure accessible only with a tool.
- Suitable for environments with pollution degree 2 per IEC 60664-1.
- Ensure transient disturbances do not exceed 140% of peak rated voltage.
- Cable temperature rating must be ≥104°C.

Mounting Options:
- DIN-Rail Installation:
1. Attach the DIN-rail clip to the back of the switch.
2. Hook the top of the clip onto the DIN rail.
3. Press the bottom of the unit until it snaps securely.
- Wall-Mount Installation:
1. Use the provided wall-mount brackets and screws.
2. Secure the switch to a flat, vibration-free surface.

Power Connection:
- Connect DC power via the 7-pin terminal block (Power 1 and Power 2).
- Optional Power 3 input via DC jack (not for hazardous locations).
- Ensure correct polarity and secure connections to prevent power loss.

LED Indicators:
- Power LEDs (PWR1, PWR2, PWR3): Green when active
- Fault LED: Amber when power failure or fault detected
- Port LEDs:
- Green: Link/Activity
- Amber: Duplex/Collision (for copper ports)
- Amber: Link (for fiber ports)

---

### 7. Performance & Capabilities

Switching Capacity:
- Supports full-duplex and half-duplex operation
- Store-and-forward architecture ensures reliable frame transmission
- Flow control prevents packet loss under heavy load

Network Performance:
- 10/100 Mbps auto-negotiation on copper ports
- 100 Mbps fixed on fiber ports
- Low latency and high throughput suitable for real-time industrial data

Reliability Features:
- Triple redundant power inputs for uninterrupted operation
- Surge and ESD protection for all ports
- Ruggedized design for vibration and shock resistance

Limitations:
- Unmanaged design (no VLAN, QoS, or SNMP management)
- Power jack not certified for hazardous area use
- Fiber distance limited to 2 km (multi-mode)

---

### 8. Standards & Compliance

Electrical & Safety Standards:
- Safety: EN60950-1, UL508 (E331061)
- Hazardous Location: UL/cUL Class I Division 2 Groups A, B, C, D; ATEX 13 ATEX 1317577X
- ATEX Standards: EN 60079-0:2012, EN 60079-15:2010

EMI/EMS Compliance:
- EMI: FCC Part 15, CISPR (EN55022) Class A
- EMS:
- EN61000-4-2 (ESD)
- EN61000-4-3 (Radiated Susceptibility)
- EN61000-4-4 (EFT)
- EN61000-4-5 (Surge)
- EN61000-4-6 (Conducted Susceptibility)
- EN61000-4-8 (Magnetic Field)
- EN61000-4-11 (Voltage Dips/Interruptions)

Mechanical & Environmental Tests:
- Shock: IEC60068-2-27
- Vibration: IEC60068-2-6
- Free Fall: IEC60068-2-32

Ingress Protection: IP30 (enclosure)

---

### 9. Additional Information

Warranty: 5 years limited warranty from ORing Industrial Networking Corp.

Maintenance:
- No periodic maintenance required; ensure enclosure integrity and clean connectors periodically.
- Inspect power and fiber connections during scheduled plant maintenance.

Support & Contact:
- Manufacturer: ORing Industrial Networking Corp.
- Address: 3F, No. 542-2 Zhongzheng Road, Xindian District, New Taipei City 231, Taiwan
- Telephone: +886-2-2218-1066
- Fax: +886-2-2218-1014
- Website: [www.oring-networking.com](http://www.oring-networking.com)
- Email: support@oring-networking.com

Condition of Safe Use:
1. Install only within an ATEX-certified IP54 enclosure.
2. Accessible only by qualified personnel using tools.
3. Ensure pollution degree ≤2 per IEC 60664-1.
4. Prevent transient voltages exceeding 140% of rated voltage.

Terminal Block Specifications:
- Manufacturer: Dinkle Enterprise Co., Ltd.
- Model: 5EHDRC-07P (terminal block), 5ESDV-07P (mating connector)
- Rating: 300 V, 15 A, 105°C
- Wire Size: 28–12 AWG
- Torque: 4.5 lb-in

Notes:
- The DC power jack is not for use in hazardous locations.
- Ensure all wiring complies with local electrical codes and ATEX installation standards.

---

### Summary

The ORing IES-A1062FX-MM-SC is a robust, unmanaged industrial Ethernet switch engineered for hazardous environments requiring Class I Division 2 and ATEX Zone 2 compliance. With 6 copper ports and 2 multi-mode fiber ports, it provides flexible connectivity for mixed media networks. Its triple redundant power inputs, wide temperature tolerance, and rugged IP30 enclosure make it ideal for mission-critical applications in oil, gas, and petrochemical industries.

The switch’s plug-and-play operation, surge protection, and industrial-grade reliability ensure continuous network performance even under extreme conditions. Certified to multiple international standards, the IES-A1062FX-MM-SC delivers dependable Ethernet connectivity where safety, durability, and uptime are paramount.