- **Hazardous Location Certification:** Fully compliant with **CID2 (Class I Division 2)** and **ATEX Class 1 Zone 2** standards for use in explosive or hazardous industrial environments. - **Port Configuration:** - 6 × 10/100Base-T(X) RJ45 ports (Auto MDI/MDI-X) - 2 × 100Base-FX fiber ports (Multi-mode, SC connectors) - **Fiber Optics:** Multi-mode fiber operation with 1310 nm wavelength, supporting up to 2 km transmission distance. - **Triple Redundant Power Inputs:** - Two terminal block inputs (12–48 VDC) - One DC power jack input (12–45 VDC) - Automatic failover ensures uninterrupted operation during power source failure. - **Wide Temperature Range:** Operates reliably from **–40°C to +70°C**, suitable for extreme industrial conditions. - **Rugged Construction:** IP30-rated metal enclosure for mechanical protection and electromagnetic shielding. - **Mounting Flexibility:** Supports both **DIN-rail** and **wall-mount** installation. - **Surge and ESD Protection:** Built-in surge suppression and electrostatic discharge protection for enhanced reliability. - **LED Indicators:** Comprehensive LED panel for power, fault, and port link/activity status. - **Low Power Consumption:** Typical consumption of **8 Watts**. - **High Reliability:** Store-and-forward switching architecture with 8192 MAC address table. - **Maintenance-Free Operation:** Unmanaged design eliminates configuration complexity, ideal for plug-and-play deployment.

Manufacturer: Oring

Category: Oil & Gas (C1D2 Approved)

Oil&Gas Industrial Unmanaged Switch 2*100FX Single Mode SC-Connector and 6*100TX, C1D2 and ATEX Class 1 Zone 2, extended -40°..70°C operating temperature, Triple Power Input 12..48VDC, ~680gr, 52*106,1*144,3mm, Oring

Manufacturer: Oring

Category: Oil & Gas (C1D2 Approved)

- **Hazardous Location Certification:** Fully compliant with **CID2 (Class I Division 2)** and **ATEX Class 1 Zone 2** standards for use in explosive or hazardous industrial environments. - **Port Configuration:** - 6 × 10/100Base-T(X) RJ45 ports (Auto MDI/MDI-X) - 2 × 1000Base-X fiber ports (Gigabit Ethernet, Multi-Mode, SC connector) - **Fiber Optics:** Multi-mode fiber with SC connectors, supporting up to 0.55 km transmission distance at 850 nm wavelength. - **Triple Redundant Power Inputs:** - Two terminal block inputs (12–48 VDC) - One power jack input (12–45 VDC) - Automatic failover ensures uninterrupted operation during power source failure. - **Wide Temperature Range:** Operates reliably from **–40°C to +70°C**, suitable for extreme industrial conditions. - **Rugged Design:** IP-30 rated metal housing for mechanical protection and electromagnetic shielding. - **Mounting Flexibility:** Supports both **DIN-rail** and **wall-mount** installation. - **Surge and ESD Protection:** Built-in surge protection and compliance with EN61000-4 standards for electromagnetic immunity. - **Unmanaged Operation:** Plug-and-play functionality with no configuration required, ideal for simple, reliable network expansion. - **LED Indicators:** Power, fault, and port activity LEDs for quick status monitoring. - **Reliability:** Store-and-forward switching architecture with 8192 MAC address table for efficient data handling. - **Low Power Consumption:** Typical consumption of 6 W. - **Warranty:** 5-year manufacturer warranty.

Manufacturer: Oring

Category: Oil & Gas (C1D2 Approved)

- **Hazardous Location Certification:** Fully compliant with **ATEX** and **UL/cUL Class I Division 2, Groups A, B, C, D** standards, suitable for use in explosive gas atmospheres (Zone 2). - **Wide Operating Temperature:** Designed for extreme environments with an extended operating range of **-40°C to +70°C**. - **Triple Redundant Power Inputs:** Supports **three independent DC power inputs** (two via terminal block, one via power jack) for uninterrupted operation. - **High Reliability:** Automatic power failover ensures continuous operation if the primary power source fails. - **Industrial-Grade Design:** Rugged **IP-30 rated metal enclosure** for mechanical protection and electromagnetic shielding. - **Flexible Mounting:** Supports both **DIN-rail** and **wall-mount** installation options. - **Unmanaged Plug-and-Play Operation:** No configuration required; supports auto-negotiation and auto MDI/MDI-X for simplified deployment. - **Fiber Connectivity:** Two **1000Base-LX single-mode SC fiber ports** for long-distance data transmission up to **10 km**. - **Surge and ESD Protection:** Built-in protection against electrical surges and electrostatic discharge. - **LED Indicators:** Comprehensive LED panel for power, fault, and port link/activity status. - **Compact and Lightweight:** Compact form factor (52 × 106.1 × 144.3 mm) and weight of approximately **685 g**. - **Long-Term Reliability:** Backed by a **5-year manufacturer warranty**.

Manufacturer: Oring

Category: Oil & Gas (C1D2 Approved)

- **Hazardous Location Certification:** Fully compliant with **CID2 (Class I Division 2)** and **ATEX Class 1 Zone 2** standards, ensuring safe operation in explosive or flammable environments. - **Port Configuration:** - 6 × 10/100Base-T(X) RJ45 ports (Auto MDI/MDI-X) - 2 × 10/100/1000Base-T(X) RJ45 ports (Auto MDI/MDI-X) - **Triple Redundant Power Inputs:** - Two terminal block inputs (12–48 VDC) - One DC power jack input (12–45 VDC) - Automatic failover between power sources for uninterrupted operation. - **Wide Operating Temperature:** -40°C to +70°C, suitable for extreme industrial conditions. - **Rugged Construction:** IP-30 rated metal enclosure for mechanical durability and electromagnetic shielding. - **Mounting Flexibility:** Supports both **DIN-rail** and **wall-mount** installation. - **High Reliability:** Store-and-forward switching architecture with 8192 MAC address table. - **Surge and ESD Protection:** Built-in protection against electrical transients and surges. - **LED Indicators:** Power, fault, and port activity LEDs for quick status monitoring. - **Compact Design:** Space-efficient form factor for control cabinets and field enclosures. - **Low Power Consumption:** Typical consumption of 7 W. - **Long-Term Warranty:** 5-year manufacturer warranty.

Manufacturer: Oring

Category: Oil & Gas (C1D2 Approved)

- **8-Port Fast Ethernet Connectivity:** Equipped with eight 10/100Base-T(X) RJ45 ports supporting auto-negotiation and auto MDI/MDI-X for flexible network integration. - **Hazardous Location Certification:** Fully compliant with **CID2 (Class I, Division 2, Groups A, B, C, D)** and **ATEX Class I Zone 2** standards, ensuring safe operation in explosive or flammable atmospheres. - **Wide Operating Temperature Range:** Designed for extreme industrial conditions with an operational range from **-40°C to +70°C** and storage range from **-40°C to +85°C**. - **Triple Redundant Power Inputs:** Supports **three independent DC power inputs** (two via terminal block, one via power jack) for uninterrupted operation. - Terminal Block Input: 12–48 VDC - Power Jack Input: 12–45 VDC Automatic failover ensures continuous operation in case of primary power loss. - **Industrial-Grade Design:** - **IP30-rated metal enclosure** for mechanical protection. - **DIN-rail and wall-mounting options** for flexible installation. - Compact form factor suitable for control cabinets and confined spaces. - **Reliability and Protection:** - Surge protection and reverse polarity protection on power inputs. - Overload current protection. - Store-and-forward switching architecture for reliable data transmission. - Flow control support per IEEE 802.3x standard. - **LED Indicators:** - Power LEDs (PWR1, PWR2, PWR3) - Fault LED (Amber) - Link/Activity and Duplex/Collision indicators for each port - **Maintenance-Free Operation:** As an unmanaged switch, it requires no configuration, making it ideal for plug-and-play deployment in industrial networks.

Manufacturer: Oring

Category: Oil & Gas (C1D2 Approved)

- **Industrial-Grade Design:** Certified for C1D2 and ATEX Class 1 Zone 2 hazardous locations, ensuring safe operation in explosive or volatile environments. - **Network Redundancy:** Supports ORing’s proprietary O-Ring technology with recovery time

Manufacturer: Oring

Category: Oil & Gas (C1D2 Approved)

- **Industrial-grade managed switch** for hazardous environments (C1D2, ATEX Class 1 Zone 2). - **Port configuration:** 2 × 100Base-FX single-mode SC fiber ports and 6 × 10/100Base-T(X) RJ-45 copper ports. - **Redundant power inputs:** Triple DC inputs (12–48 VDC) for high availability. - **Wide operating temperature:** -40°C to +70°C for extreme environments. - **Compact, rugged design:** IP-30 metal housing, DIN-rail and wall-mountable. - **Advanced redundancy:** Supports ORing’s proprietary **O-Ring** (

Manufacturer: Oring

Category: Oil & Gas (C1D2 Approved)

- **Industrial-Grade Managed Switch:** Designed for hazardous environments with **C1D2/ATEX certification**. - **Port Configuration:** - 6 × 10/100Base‑T(X) RJ‑45 ports (Auto MDI/MDI‑X) - 2 × 1000Base‑X Gigabit fiber ports (Multi‑Mode SC connectors) - **High Availability & Redundancy:** - **O‑Ring** technology with recovery time

Manufacturer: Oring

Category: Oil & Gas (C1D2 Approved)

- **Industrial-Grade Design:** Certified for **C1D2** and **ATEX Class 1 Zone 2**, suitable for hazardous locations. - **High Reliability:** Supports **O-Ring** redundancy with recovery time

Manufacturer: Oring

Category: Oil & Gas (C1D2 Approved)

- **Hazardous Location Certification:** Certified for C1D2 and ATEX Class I Zone 2 environments, ensuring safe operation in explosive atmospheres. - **High-Speed Connectivity:** 6×10/100Base-T(X) and 2×10/100/1000Base-T(X) RJ-45 ports with auto MDI/MDI-X support. - **Redundant Network Technology:** Supports ORing’s proprietary O-Ring redundancy (recovery

Manufacturer: Oring

Category: Oil & Gas (C1D2 Approved)

- **Industrial-Grade Design:** Certified for C1D2 and ATEX Class 1 Zone 2 environments, ensuring safe operation in explosive or hazardous atmospheres. - **High Reliability:** Supports ORing’s proprietary **O-Ring redundancy technology** with recovery times under 10 ms for up to 250 connected units. - **Comprehensive Redundancy:** Supports O-Ring, Open-Ring, O-Chain, MRP, and IEEE 802.1s/w/D MSTP/RSTP/STP protocols for maximum uptime. - **Flexible Management:** Configurable via Web GUI, Telnet, RS-232 console (CLI), SNMP v1/v2c/v3, and ORing’s **Open-Vision** centralized management software. - **Advanced Security:** Includes 802.1x port-based authentication, MAC-based port security, IP security lists, SNMPv3 encryption, and RADIUS centralized password management. - **Quality of Service (QoS):** IEEE 802.1p prioritization, DSCP/TOS support, and four hardware priority queues for deterministic traffic handling. - **Multicast Optimization:** IGMP v2/v3 snooping and multicast filtering for efficient bandwidth utilization. - **Time Synchronization:** Supports SNTP and IEEE 1588 PTP Client for precise clock synchronization across networks. - **Event Notification:** Real-time alerts via Syslog, SNMP traps, and SMTP email notifications. - **Wide Temperature Range:** Operates reliably from **-40°C to +70°C**, suitable for extreme industrial environments. - **Triple Power Inputs:** Redundant 12–48 VDC inputs (two terminal block inputs and one DC jack) for uninterrupted operation. - **Compact and Durable:** IP-30 metal enclosure with DIN-rail and wall-mount options. - **Long Warranty:** Backed by a **5-year manufacturer warranty**.

Manufacturer: Oring

Category: Oil & Gas (C1D2 Approved)

- **Hazardous Location Certification:** Certified for **UL/cUL Class I Division 2 Groups A/B/C/D** and **ATEX Class 1 Zone 2** environments. Complies with **EN60079‑0:2012+A11:2013** and **EN60079‑15:2010**. - **High‑Performance Managed Switching:** - 16 × 10/100Base‑T(X) RJ‑45 ports - 2 × Gigabit combo ports (RJ‑45 + SFP) - Switching bandwidth: **7.2 Gbps** - Switching latency: **

Manufacturer: Oring

Category: Oil & Gas (C1D2 Approved)