- **High-Density 68-Pin HD Connector:** Utilizes a 0.8 mm pitch connector for compact, high-channel-count signal interfacing. - **Shielded Construction:** The cable is fully shielded to minimize electromagnetic interference (EMI) and crosstalk, ensuring signal integrity in electrically noisy industrial environments. - **Optimized for Analog and Digital I/O Boards:** Designed for use with CONTEC’s **ADA16-32/2(PCI)F**, **ADA16-32/2(CB)F**, and other 68-pin interface boards. - **Industrial-Grade Durability:** Built with robust materials suitable for continuous operation in automation, measurement, and control systems. - **Short-Length Configuration (0.5 m):** Ideal for compact installations where minimal signal delay and reduced cable clutter are required. - **Molded Connector Ends:** Provides mechanical stability and strain relief, preventing connector damage during repeated use. - **Compatibility with Multiple Interface Standards:** Supports analog, digital, and mixed-signal transmission for PCI, PC Card, and CompactPCI systems. - **Plug-and-Play Integration:** Designed for direct connection between CONTEC boards and terminal units without additional adapters.

Manufacturer: Contec

Category: Cables and Accessories

- **High‑Density 68‑Pin Interface:** Equipped with a 68‑pin half‑pitch (0.8 mm) high‑density connector, ensuring compact yet high‑capacity signal routing suitable for multi‑channel analog or digital I/O systems. - **Shielded Construction:** Full‑coverage shielding minimizes electromagnetic interference (EMI) and crosstalk, maintaining signal integrity in electrically noisy industrial environments. - **Optimized Length (1.5 m):** Provides an ideal balance between flexibility and signal quality for rack‑mounted or panel‑mounted systems. - **Industrial‑Grade Durability:** Designed for continuous operation in automation, measurement, and control systems. The cable jacket and internal conductors are rated for mechanical resilience and electrical stability. - **Compatibility with CONTEC Boards:** Specifically designed for use with CONTEC analog and digital I/O boards, including models such as ADA16‑32/2(PCI)F, ADA16‑32/2(CB)F, and other 68‑pin interface products. - **Plug‑and‑Play Integration:** Factory‑terminated connectors ensure reliable mating with CONTEC boards and terminal units without additional assembly. - **Noise‑Resistant Signal Transmission:** Shielded twisted‑pair wiring and precision impedance control reduce signal degradation over the 1.5 m length. - **Compliance with PCI Bus Accessory Standards:** Fully compatible with CONTEC’s PCI Bus Series accessories, ensuring seamless integration with analog, digital, and communication modules.

Manufacturer: Contec

Category: Cables and Accessories

- **High‑Density 96‑Pin Half‑Pitch Connector:** Equipped with a precision 96‑pin half‑pitch (Honda Tsushin Kogyo or equivalent) connector on one end, ensuring compatibility with CONTEC PCI and CompactPCI I/O boards. - **Open‑End Termination:** The opposite end is open, allowing direct wiring to custom terminal blocks, control panels, or external devices. - **Shielded Construction:** The cable features full shielding to minimize electromagnetic interference (EMI) and crosstalk, ensuring signal integrity in electrically noisy industrial environments. - **Optimized Length:** 1.5 m total length provides flexibility for rack or panel installations while maintaining signal quality. - **Industrial Durability:** Designed for continuous operation in factory automation, process control, and test systems. The cable jacket and conductors are rated for industrial temperature and mechanical stress. - **High Compatibility:** Fully compatible with CONTEC’s 96‑pin half‑pitch interface boards such as: - PI‑64L(PCI), PO‑64L(PCI), PIO‑32/32L(PCI), PIO‑64/64L(PCI) - PIO‑32/32F(PCI), PIO‑32/32B(PCI)H, PIO‑48D(PCI) - CNT24‑4D(PCI), CNT32‑8M(PCI) - SMC‑2P(PCI), SMC‑4P(PCI) - AD12‑64(PCI), AD12‑16(PCI)E, and other analog/digital boards using 96‑pin connectors. - **Noise‑Resistant Signal Transmission:** Shielded twisted‑pair internal wiring reduces susceptibility to external noise and ensures stable digital or analog signal transfer. - **Flexible Integration:** Can be used with optional terminal units such as EPD‑96, DTP‑64(PC), or connector converters like CCB‑96 for 37‑pin D‑type breakout.

Manufacturer: Contec

Category: Cables and Accessories

- **High‑Density 96‑Pin Half‑Pitch Connector:** Equipped with a precision 96‑pin half‑pitch (Honda Tsushin Kogyo or equivalent) male connector on one end, compatible with CONTEC’s PCI and CompactPCI I/O boards. - **Open‑End Configuration:** The opposite end of the cable is open, allowing direct wiring to custom terminal blocks, sensors, actuators, or other external devices. - **Shielded Construction:** Full‑length shielding minimizes electromagnetic interference (EMI) and crosstalk, ensuring stable signal transmission in electrically noisy industrial environments. - **Optimized for CONTEC PCI Bus Boards:** Designed for use with digital I/O, analog I/O, counter, and motor control boards such as PIO‑32/32L(PCI), PI‑64L(PCI), PO‑64L(PCI), CNT24‑4D(PCI), and SMC‑2P(PCI). - **Industrial‑Grade Durability:** Built with robust insulation and conductor materials suitable for continuous operation in factory automation, process control, and test systems. - **Flexible 3 m Length:** Provides sufficient reach for rack‑mounted or panel‑mounted installations while maintaining signal integrity. - **High Compatibility:** Interfaces seamlessly with CONTEC terminal units (EPD‑96, DTP‑64(PC)), connector converters (CCB‑96), and monitoring tools (CM‑64(PC)E).

Manufacturer: Contec

Category: Cables and Accessories

- **High-Density 96-Pin Half-Pitch Connector:** Equipped with a precision-engineered 96-pin half-pitch (Honda Tsushin Kogyo compatible) male connector for direct interface with CONTEC PCI I/O boards. - **Open-End Termination:** The opposite end of the cable is open, allowing users to connect individual wires to custom terminal blocks, sensors, actuators, or other external devices. - **Shielded Construction:** The cable is fully shielded to minimize electromagnetic interference (EMI) and ensure signal integrity in industrial environments. - **Industrial-Grade Durability:** Designed for continuous operation in factory automation, process control, and data acquisition systems. - **Compatibility:** Fully compatible with CONTEC’s 96-pin half-pitch interface boards, including digital I/O, analog I/O, counter, and motor control boards. - **Flexible Integration:** Supports connection to terminal units such as EPD-96, DTP-64(PC), and converter boards like CCB-96. - **Standardized Accessory:** Part of CONTEC’s standardized cable lineup for PCI Bus Series boards, ensuring consistent pin mapping and reliable connectivity.

Manufacturer: Contec

Category: Cables and Accessories

- **High-Density 100-Pin Connectivity:** Equipped with two 100-pin, 0.8mm-pitch male connectors, the cable supports high signal density for complex data and control interfaces. - **Shielded Construction:** The cable incorporates a full shielding layer to minimize electromagnetic interference (EMI) and crosstalk, ensuring stable signal transmission even in electrically noisy environments. - **Precision Connectors:** Uses HDRA-E100MA1 connectors (manufactured by HONDA or equivalent), known for their mechanical robustness and reliable contact performance. - **Multiple Length Options:** Available in four standard lengths—0.5m, 1.5m, 3m, and 5m—to accommodate various installation requirements. - **Durable Build:** Constructed with high-quality materials, including UL20276-rated conductors, ensuring long-term durability and compliance with safety standards. - **Compact Form Factor:** The 0.8mm pitch and 100-pin configuration allow for compact, space-efficient wiring in dense electronic assemblies. - **Secure Connection:** Each connector is equipped with M2 thumb screws for mechanical fastening, preventing accidental disconnection due to vibration or movement. - **Compatibility:** Designed specifically for CONTEC boards featuring 100-pin 0.8mm-pitch connectors, but also compatible with other devices using the same connector standard. - **Flexible Application:** Suitable for signal, control, and data transmission in industrial automation, measurement systems, and embedded control environments.

Manufacturer: Contec

Category: Cables and Accessories

- **Shielded Construction:** The cable is fully shielded to minimize electromagnetic interference (EMI) and crosstalk, ensuring stable signal integrity in electrically noisy environments. - **Dual 37-pin D-type Male Connectors:** Equipped with precision-molded 37-pin D-sub male connectors on both ends, compatible with CONTEC’s D-type interface boards and terminal units. - **High Signal Integrity:** Designed for accurate digital and analog signal transmission between PCI boards and external devices or terminal panels. - **Industrial-Grade Durability:** Built for continuous operation in industrial automation systems, test benches, and control panels. - **Short-Length Option (0.5m):** Ideal for compact installations where minimal cable length reduces signal delay and clutter. - **Compatibility:** Fully compatible with CONTEC’s 37-pin D-type interface boards, including digital I/O, analog I/O, counter, and communication boards. - **Plug-and-Play Integration:** Designed for direct connection between CONTEC boards and terminal units such as EPD-37, DTP-3(PC), and DTP-4(PC). - **Standardized Pin Configuration:** Maintains consistent pin mapping across CONTEC’s accessory ecosystem for simplified wiring and maintenance. - **RoHS Compliant:** Manufactured in accordance with environmental and safety standards for industrial electronics.

Manufacturer: Contec

Category: Cables and Accessories

- **Shielded Construction:** The cable is fully shielded to minimize electromagnetic interference (EMI) and crosstalk, ensuring stable signal integrity in electrically noisy industrial environments. - **Dual 37‑pin D‑type Male Connectors:** Equipped with precision‑molded 37‑pin D‑sub male connectors on both ends, compatible with CONTEC’s D‑type interface boards and terminal units. - **Standard Length:** 1.5 meters (approx. 59 inches), providing a balance between flexibility and signal integrity for typical rack‑to‑panel or board‑to‑terminal connections. - **Industrial‑Grade Durability:** Designed for continuous operation in automation systems, test benches, and data acquisition setups. - **Compatibility:** Fully compatible with CONTEC’s PCI, CompactPCI, and PC Card digital I/O boards featuring 37‑pin D‑type connectors, including models such as PIO‑16/16L(PCI), PIO‑32/32L(PCI), PI‑32B(PCI), PO‑32L(PCI), and others. - **Plug‑and‑Play Integration:** The cable connects directly between the board and terminal units such as EPD‑37, DTP‑3(PC), DTP‑4(PC), or CM‑32(PC)E without additional adapters. - **Noise‑Resistant Signal Transmission:** The shielded design and high‑quality conductor materials ensure low signal attenuation and high‑speed digital signal fidelity. - **Molded Connector Housings:** Each connector is molded for strain relief and mechanical protection, preventing pin damage and ensuring long‑term reliability. - **RoHS‑Compliant Materials:** Constructed using environmentally safe materials compliant with modern electronic manufacturing standards.

Manufacturer: Contec

Category: Cables and Accessories

- **Shielded Construction:** The cable is fully shielded to minimize electromagnetic interference (EMI) and crosstalk, ensuring stable signal integrity even in electrically noisy industrial environments. - **Dual 37-pin D-type Male Connectors:** Equipped with precision-molded 37-pin D-sub male connectors on both ends, compatible with CONTEC’s D-type interface boards and terminal units. - **High Compatibility:** Designed for use with CONTEC’s PCI Bus digital I/O boards, analog I/O boards, counter/motor controller boards, and communication boards that utilize 37-pin D-type connectors. - **Industrial-Grade Durability:** Built for continuous operation in automation systems, test benches, and control panels. - **Standardized Length:** 3.0 meters (model suffix “3P” denotes 3-meter shielded cable). - **Plug-and-Play Integration:** Directly connects between CONTEC boards and terminal units such as EPD-37, DTP-3(PC), DTP-4(PC), or CM-32(PC)E. - **Noise Immunity:** Shielding and grounding design prevent signal degradation due to external electrical noise. - **Flexible Application Range:** Suitable for digital signal transmission, analog signal routing, and control signal interfacing. - **Accessory Ecosystem:** Fully compatible with CONTEC’s accessory lineup including CN5-D37M connectors, DIN-ADP1 DIN-rail adapters, and terminal units.

Manufacturer: Contec

Category: Cables and Accessories

- **Fully Shielded Construction:** The cable employs a double-shielded design to minimize electromagnetic interference (EMI) and crosstalk, ensuring stable signal integrity even in electrically noisy industrial environments. - **37-pin D-type Male Connectors:** Equipped with precision-molded 37-pin D-sub male connectors on both ends, compatible with CONTEC’s DCLC-J37SAF-20L9 (JAE) or equivalent connectors used on I/O boards and terminal units. - **High Signal Fidelity:** Designed for accurate transmission of digital and analog signals between interface boards and external devices. - **Industrial-Grade Durability:** Built for continuous operation in automation systems, test benches, and control panels. - **Standardized Compatibility:** Matches the pinout and mechanical specifications of CONTEC’s 37-pin D-type interface boards, terminal units, and accessories. - **Extended Length:** 5.0 meters total cable length, suitable for flexible installation in control cabinets or between rack-mounted systems. - **Plug-and-Play Integration:** No special configuration required; connects directly between compatible CONTEC boards and terminal units. - **RoHS-Compliant Materials:** Manufactured using environmentally safe materials conforming to international standards.

Manufacturer: Contec

Category: Cables and Accessories

- **High-Density 96-Pin Half Pitch Connectors:** Equipped with precision 96-pin half-pitch male connectors on both ends, compatible with CONTEC’s PCI and CompactPCI I/O boards and terminal units. - **Shielded Construction:** The cable is fully shielded to minimize electromagnetic interference (EMI) and crosstalk, ensuring signal integrity in electrically noisy industrial environments. - **Short-Length Configuration (0.5 m):** Optimized for compact installations where minimal cable length reduces signal delay and clutter inside control panels or test setups. - **Industrial-Grade Durability:** Designed for continuous operation in industrial automation systems, offering robust mechanical and electrical performance. - **Compatibility with CONTEC Accessories:** Fully compatible with CONTEC terminal units such as EPD-96, DTP-64(PC), and connector converters like CCB-96. It can also be used with digital I/O boards (e.g., PIO-32/32L(PCI), PI-64L(PCI), PO-64L(PCI)) and analog I/O boards (e.g., AD12-64(PCI)). - **Plug-and-Play Integration:** The cable’s molded connectors ensure secure mating and easy installation without additional assembly. - **Noise Immunity:** Shielding and twisted-pair internal wiring reduce susceptibility to external noise, critical for high-speed digital or analog signal transmission.

Manufacturer: Contec

Category: Cables and Accessories

- **High‑Density 96‑Pin Half‑Pitch Connectors:** Equipped with precision 96‑pin half‑pitch connectors on both ends, ensuring secure mating with CONTEC boards and terminal units such as EPD‑96 or DTP‑64(PC). - **Shielded Construction:** The cable is fully shielded to minimize electromagnetic interference (EMI) and crosstalk, maintaining signal integrity in electrically noisy industrial environments. - **Optimized Length (1.5 m):** Provides a balance between flexibility and signal quality, suitable for rack‑mounted or panel‑mounted configurations. - **Industrial‑Grade Durability:** Designed for continuous operation in automation systems, with robust insulation and strain‑relief features to withstand mechanical stress. - **Plug‑and‑Play Compatibility:** Directly connects CONTEC PCI/PCIe/CompactPCI digital I/O boards to terminal panels, converter boards, or monitoring tools without additional adapters. - **Standardized Interface:** Conforms to CONTEC’s 96‑pin half‑pitch connector standard, ensuring interoperability across multiple product families (Digital I/O, Analog I/O, Counter, and Motor Controller boards). - **Noise Immunity:** Shielded twisted‑pair wiring and grounded connector shells provide superior noise suppression, essential for high‑speed digital signal transmission. - **Flexible Application Range:** Supports both input and output signal routing for opto‑isolated, TTL‑level, or relay‑type I/O boards.

Manufacturer: Contec

Category: Cables and Accessories

- **Shielded Construction:** Fully shielded to minimize electromagnetic interference (EMI) and crosstalk, ensuring stable signal integrity in electrically noisy environments. - **High‑Density 96‑Pin Half‑Pitch Connectors:** Equipped with precision‑molded connectors on both ends, compatible with CONTEC’s 96‑pin half‑pitch board interfaces (e.g., PCR‑E96LMD, HDRA‑E100W1L‑FDT1EC‑SL). - **3‑Meter Cable Length:** Provides extended reach for flexible installation between PCI boards and terminal units such as EPD‑96 or DTP‑64(PC). - **Industrial‑Grade Durability:** Designed for continuous operation in industrial automation, measurement, and control applications. - **Plug‑and‑Play Compatibility:** Directly connects CONTEC PCI/CompactPCI digital I/O, analog I/O, counter, and motor control boards to corresponding terminal panels or converter boards. - **Noise‑Resistant Signal Transmission:** Shielding and twisted‑pair internal wiring reduce signal degradation and maintain accurate data transfer. - **Standardized Accessory:** Listed as a standard optional cable for numerous CONTEC PCI Bus Series boards, ensuring guaranteed compatibility and performance.

Manufacturer: Contec

Category: Cables and Accessories

- **High‑Density 96‑Pin Half‑Pitch Connectors:** Equipped with precision 96‑pin half‑pitch (Honda Tsushin Kogyo PCR‑E96LMD or equivalent) connectors on both ends, ensuring compatibility with CONTEC PCI and CompactPCI I/O boards. - **Shielded Construction:** Full‑coverage shielding minimizes electromagnetic interference (EMI) and crosstalk, maintaining signal integrity in electrically noisy industrial environments. - **5 m Cable Length:** Provides extended reach for flexible equipment layout while maintaining signal quality over distance. - **Industrial‑Grade Durability:** Designed for continuous operation in automation systems, test benches, and data acquisition setups. - **Plug‑and‑Play Compatibility:** Fully compatible with CONTEC’s digital I/O, analog I/O, counter, and motor control boards that use 96‑pin half‑pitch connectors. - **Standardized Accessory:** Part of CONTEC’s modular accessory ecosystem, ensuring interchangeability with other cable lengths and connector types (1.5 m, 3 m, 5 m variants). - **Noise‑Resistant Signal Transmission:** Shielded twisted‑pair internal wiring reduces susceptibility to external noise and ensures stable digital and analog signal transfer. - **Molded Connector Ends:** Factory‑molded connectors provide strain relief and mechanical robustness, preventing pin damage and ensuring long‑term reliability.

Manufacturer: Contec

Category: Cables and Accessories

- **High-Density Interface Conversion:** Converts a 96-pin half-pitch connector to two 37-pin D-sub male connectors, enabling flexible interfacing with external devices or terminal units. - **Shielded Construction:** Employs a 96-core shielded cable (UL2464) to minimize electromagnetic interference (EMI) and ensure signal integrity in industrial environments. - **Industrial-Grade Connectors:** - 96-pin half-pitch female connector: PCR-E96FA (HONDA Tsushin Kogyo) or equivalent. - 37-pin D-sub male connectors: 17JE-23370-02(D1) (DDK) or equivalent. - **Mechanical Reinforcement:** Molded plastic connector housings with thumb screws (UNC #4-40) for secure attachment and vibration resistance. - **Optimized for CONTEC Boards:** Designed for use with CONTEC’s 96-pin half-pitch digital I/O boards such as PIO-32/32L(PCI), PIO-64/64L(PCI), PI-64L(PCI), PO-64L(PCI), and CNT24-4D(PCI). - **High Signal Integrity:** Each conductor is individually shielded within the overall cable shield to reduce crosstalk and maintain signal fidelity. - **Flexible Length Options:** Available in 1.5 m (PCB96WS-1.5), 3.0 m (PCB96WS-3), and 5.0 m (PCB96WS-5) variants. - **Compatibility:** Fully compatible with CONTEC terminal units such as EPD-96, DTP-64(PC), and CCB-96 connector converter boards. - **Industrial Reliability:** Designed for continuous operation in automation systems, test benches, and data acquisition setups.

Manufacturer: Contec

Category: Cables and Accessories

- **Purpose-built Conversion Cable:** Converts a 96-pin half-pitch connector into two 37-pin D-type male connectors, enabling flexible interfacing with peripheral devices, terminal blocks, or signal conditioning units. - **High-Density Shielded Design:** Employs a 96-core shielded cable (AWG #28) to ensure signal integrity and minimize electromagnetic interference (EMI) in industrial environments. - **Industrial-Grade Construction:** Designed for robust performance in automation, measurement, and control systems. - **Compatibility:** Fully compatible with CONTEC’s PCI Bus Series digital I/O boards such as PI-64L(PCI), PO-64L(PCI), PIO-32/32L(PCI), and other 96-pin half-pitch interface models. - **Plug-and-Play Integration:** Provides direct connection between CONTEC boards and terminal units like EPD-96, DTP-64(PC), or converter boards such as CCB-96. - **Shielded Molded Connectors:** Molded connector housings with integral strain relief and shielding for durability and noise suppression. - **Standardized Connector Hardware:** Equipped with UNC #4-40 thumb screws for secure mechanical fastening to mating connectors. - **Multiple Length Options:** Available in 1.5 m, 3.0 m, and 5.0 m variants to accommodate different installation requirements. - **RoHS-Compliant Materials:** Constructed using environmentally safe materials conforming to modern industrial standards.

Manufacturer: Contec

Category: Cables and Accessories

- **Purpose‑built for CONTEC PCI Bus Digital I/O Boards:** Provides direct connectivity between 96‑pin half‑pitch board connectors and external 37‑pin D‑SUB interfaces. - **Dual 37‑pin D‑SUB Male Outputs:** Converts one 96‑pin half‑pitch connector into two 37‑pin D‑SUB male connectors, enabling connection to two 37‑pin terminal units or devices. - **Shielded Construction:** Employs a 96‑core shielded cable (UL2464) to minimize electrical noise and ensure signal integrity in industrial environments. - **High‑Density Half‑Pitch Connector:** Uses a 96‑pin half‑pitch female connector (PCR‑E96FA by HONDA or equivalent) for compact, reliable board connection. - **Industrial‑Grade D‑SUB Connectors:** Two 37‑pin D‑SUB male connectors (17JE‑23370‑02(D1) by DDK or equivalent) with UNC #4‑40 thumb screws for secure attachment. - **Multiple Length Options:** Available in 1.5 m, 3 m, and 5 m variants (PCB96WS‑1.5P, PCB96WS‑3P, PCB96WS‑5P). - **Compatibility:** Designed for use with CONTEC digital I/O boards such as PIO‑32/32L(PCI), PIO‑64/64L(PCI), PI‑64L(PCI), PO‑64L(PCI), and other 96‑pin half‑pitch interface models. - **Noise‑Resistant Shielding:** Full‑length shielding prevents crosstalk and external EMI interference, ensuring reliable high‑speed digital signal transmission. - **Industrial Durability:** Molded connectors and robust cable jacket suitable for factory automation, test systems, and control panels. - **Plug‑and‑Play Accessory:** No configuration required; connects directly between board and terminal units such as EPD‑96, DTP‑64(PC), or CCB‑96.

Manufacturer: Contec

Category: Cables and Accessories

- **Conversion Functionality:** Converts a 50-pin miniature ribbon connector (board side) to a 37-pin D-SUB connector (device side). - **Cable Length:** 0.5 meters (nominal). - **Shielded Construction:** Double-shielded design minimizes electromagnetic interference (EMI) and ensures signal integrity in industrial environments. - **Molded Connectors:** Factory-molded terminations provide strain relief and mechanical durability. - **Industrial-Grade Materials:** Designed for long-term reliability in automation, measurement, and control systems. - **Compatibility:** Specifically designed for CONTEC’s Low Profile PCI digital I/O boards such as PIO-16/16B(LPCI)H, PIO-16/16L(LPCI)H, and PIO-16/16T(LPCI)H. - **Plug-and-Play Integration:** Enables direct connection between digital I/O boards and terminal units (e.g., EPD-37, DTP-3(PC), DTP-4(PC)). - **Signal Integrity:** Maintains accurate digital signal transmission across all channels with minimal crosstalk. - **Compact Form Factor:** Ideal for confined installation spaces within control cabinets or PC enclosures. - **Compliance:** Manufactured to meet industrial electrical and mechanical standards for PCI-based I/O systems.

Manufacturer: Contec

Category: Cables and Accessories

- **High‑Density 96‑Pin Half‑Pitch Interface:** Supports connection to CONTEC PCI and CompactPCI digital I/O boards equipped with 96‑pin half‑pitch connectors (e.g., PI‑64L(PCI), PO‑64L(PCI), PIO‑32/32L(PCI), PIO‑64/64L(PCI), etc.). - **50‑Pair Round Cable Construction:** Comprises 50 twisted pairs (100 conductors total) arranged in a round, shielded configuration for optimal signal integrity and reduced crosstalk. - **Extended Length (10 m):** Provides long‑distance connectivity between PC‑based I/O boards and remote terminal panels or devices, suitable for large control cabinets or distributed installations. - **Industrial‑Grade Shielding:** Double‑shielded design minimizes electromagnetic interference (EMI) and radio‑frequency interference (RFI), ensuring stable digital signal transmission in noisy industrial environments. - **High‑Reliability Connectors:** Equipped with precision 96‑pin half‑pitch connectors (female/male as required) compatible with HONDA Tsushin Kogyo PCR‑E96LMD or equivalent mating connectors. - **Compatibility with Multiple Accessories:** Designed for use with CONTEC terminal units such as EPD‑96, DTP‑64(PC), and connector converters like CCB‑96, as well as emulator and monitoring tools (CM‑64(PC)E). - **Optimized for PCI Bus Digital I/O Boards:** Fully compatible with CONTEC’s PCI Bus Series boards supporting 32‑bit, 33 MHz PCI interface, including opto‑isolated, TTL‑level, and relay‑output models. - **Durable Industrial Construction:** Ruggedized insulation and strain‑relief design suitable for continuous operation in factory automation, process control, and test system environments.

Manufacturer: Contec

Category: Cables and Accessories

- **High‑Density 96‑Pin Interface:** Provides compact, high‑pin‑count connectivity for digital and analog I/O boards. - **Half‑Pitch D‑Type Format:** Uses a 0.635 mm (half‑pitch) contact spacing, allowing reduced connector footprint while maintaining mechanical robustness. - **Female Connector for PCB Mounting:** Designed for direct soldering onto printed circuit boards, ensuring secure mechanical and electrical connection. - **Compatibility with Contec PCI Bus Boards:** Fully compatible with Contec’s PCI‑based digital I/O boards such as PI‑64L(PCI), PO‑64L(PCI), PIO‑32/32L(PCI), and others using 96‑pin half‑pitch interfaces. - **Industrial‑Grade Reliability:** Engineered for industrial automation environments requiring stable signal integrity and long‑term durability. - **Supports Multiple Signal Types:** Suitable for TTL‑level, opto‑isolated, and open‑collector I/O circuits depending on the board configuration. - **Standardized Accessory Interface:** Matches Contec’s accessory ecosystem including terminal units (EPD‑96, DTP‑64(PC)), converter boards (CCB‑96), and shielded/flat cables (PCB96PS, PCA96PS, PCB96W). - **Ease of Integration:** Enables straightforward connection between PCI I/O boards and external control or measurement devices. - **RoHS‑Compliant Construction:** Manufactured using lead‑free materials in compliance with environmental directives.

Manufacturer: Contec

Category: Cables and Accessories

- **High‑Density 96‑Pin Interface:** Supports up to 96 discrete signal lines in a compact half‑pitch D‑type format, enabling high channel‑count connectivity for digital and analog I/O boards. - **Metal Case Construction:** Provides mechanical strength, EMI/RFI shielding, and long‑term durability in industrial environments. - **Standardized Pin Configuration:** Fully compatible with CONTEC’s 96‑pin half‑pitch board connectors (e.g., PCR‑E96LMD, HDRA‑E100W1L‑FDT1EC‑SL, HONDA Tsushin Kogyo equivalents). - **Industrial‑Grade Reliability:** Designed for continuous operation in automation systems, ensuring stable signal transmission under vibration, temperature variation, and electrical noise. - **Broad Compatibility:** Interfaces with CONTEC’s PCI, CompactPCI, and PC Card I/O boards, including digital input/output, analog input/output, counter, and motor control boards. - **Ease of Integration:** Supports a wide range of optional shielded and flat cables (PCB96PS, PCA96PS, PCB96P, PCA96P, PCB96W, PCB96WS, PCB100/96PS) and terminal units (EPD‑96, DTP‑64(PC), CCB‑96). - **DIN‑Rail Adaptability:** Can be used with DIN‑ADP1 adapter for secure mounting of terminal panels in control cabinets. - **Signal Integrity:** Gold‑plated contacts and precision alignment minimize contact resistance and signal loss. - **Compliance with PCI Bus Standards:** Designed to complement CONTEC’s PCI Bus Series boards supporting 32‑bit, 33 MHz, 5 V signaling.

Manufacturer: Contec

Category: Cables and Accessories

- **External 50‑Pin Flat Cable Interface:** Provides a robust external connection point for 50‑pin ribbon or flat cable connectors, commonly used in SCSI, parallel, or custom signal applications. - **Internal Dual 20‑Pin Connectors (2×20‑Pin):** Two internal 20‑pin IDC (Insulation Displacement Connector) headers allow direct connection to internal circuit boards, controllers, or signal distribution modules. - **Standard Slot Bracket Form Factor:** Designed to fit into a standard PCI/ISA/ATX expansion slot opening, enabling secure mounting on the rear panel of a PC chassis or industrial enclosure. - **Passive Signal Pass‑Through:** No active components; ensures direct one‑to‑one signal continuity between internal and external connectors. - **High‑Quality Flat Cable Assembly:** Pre‑assembled flat ribbon cable ensures consistent signal integrity and simplifies installation. - **Versatile Application Range:** Suitable for data, control, or communication signal routing in industrial automation, laboratory instrumentation, and embedded computing systems. - **Mechanical Stability:** Metal bracket construction provides grounding and mechanical support for the external connector, preventing strain on internal wiring. - **Ease of Integration:** Plug‑and‑play mechanical interface; no drivers or software required.

Manufacturer: No category

Category: Cables and Accessories

- **Interface Conversion:** Converts SMB male connector (PXI module side) to BNC male connector (instrumentation side), enabling direct connection to standard laboratory equipment. - **Optimized for PXI Digitizers:** Designed for seamless integration with ADLINK PXI-9816, PXI-9826, and PXI-9846 modules, ensuring impedance matching and minimal signal loss. - **High Signal Integrity:** Utilizes precision coaxial construction with 50 Ω impedance to maintain consistent signal quality across the full frequency range supported by the PXI digitizers. - **Durable Construction:** Features high-quality shielding and robust connector housings to minimize electromagnetic interference (EMI) and mechanical wear. - **Standard Length:** 1-meter cable length provides flexibility for bench setups while maintaining low attenuation and minimal phase distortion. - **Plug-and-Play Compatibility:** No configuration required; simply connect between PXI module SMB ports and external BNC-based instruments. - **Versatile Application:** Suitable for analog input/output, waveform generation, and signal monitoring in test and measurement systems. - **Reliable Mechanical Coupling:** SMB snap-on connector ensures secure attachment to PXI modules, while BNC bayonet coupling provides quick and stable connection to oscilloscopes, analyzers, or other test devices.

Manufacturer: Adlink Technology Inc.

Category: Cables and Accessories

- **High-Frequency SMB-to-SMB Connectivity:** Equipped with male SMB connectors on both ends, the cable supports secure snap-on coupling for quick, reliable connections in high-density setups. - **Optimized for ADLINK PCIe-7350:** Designed to interface directly with ADLINK’s PCIe-7350 high-speed digital I/O card, ensuring signal integrity and compatibility with the card’s timing and triggering functions. - **Low Signal Loss and High Shielding Efficiency:** Constructed with precision coaxial cable featuring a high-quality dielectric and braided shielding to minimize electromagnetic interference (EMI) and maintain signal fidelity. - **Compact and Flexible Design:** The 1-meter length provides sufficient reach for internal or bench-top setups while maintaining manageable cable routing and minimal signal degradation. - **Durable Construction:** Built with robust materials suitable for repeated connections and disconnections, ensuring long-term reliability in test and measurement environments. - **Broad Application Range:** Suitable for high-speed digital signal transmission, clock synchronization, trigger signal routing, and other timing-critical applications. - **Standardized SMB Interface:** Complies with industry-standard SMB connector specifications, ensuring interoperability with other SMB-compatible devices and instruments.

Manufacturer: Adlink Technology Inc.

Category: Cables and Accessories