Industrial VPN Router USB/LAN slim case, fast redundant Ethernet ring (recovery time less than 10ms over 250 units), alarm LED e-mail warning system log output, DIN-rail mounting, ESD 4kV DC Ethernet ports, surge 2000VDC power, 96*71*26mm, redundant dual power input, 12-48VDC (24V) 1A@12V, extended -10°..60°C operating temperature, Oring

Manufacturer: Oring

Category: Industrial USB

The ISC‑4110U includes a wide range of industrial‑class features engineered for serial communication reliability and operational durability. • Industrial converter: Converts 1×USB 2.0 port into 4×RS‑232 serial ports. • High‑speed serial performance with baud rates from 300 to 921.6 Kbps. • Supports full RS‑232 signaling including TxD, RxD, RTS, CTS, DTR, DSR, DCD, and GND. • RS‑232 interface operates in DTE mode. • Compact, intelligent design for easy integration with PCs, industrial controllers, and USB hubs. • Internal high‑speed transient suppressors on each data line for protection against overvoltage and electrical spikes. • Built‑in 15 kV ESD protection for serial ports to ensure data integrity and port longevity. • Dual power input options: USB bus power (self‑powered mode) or 12–48 VDC redundant power input via terminal block and power jack. • Extended industrial operating temperature range from −40°C to +70°C. • Storage temperature from −40°C to +85°C. • Rugged IP30‑rated metal enclosure designed for industrial environments. • Green LED indicators for power and data transmission (4 LEDs corresponding to 4 RS‑232 ports). • DIN‑rail and wall‑mount hardware included for flexible installation. • 1 m DB62‑to‑4×DB9 male cable included. • Designed for demanding industrial applications such as factory automation, industrial controllers, sensors, meters, serial‑based instruments, and legacy communication equipment. • Complies with global EMI/EMS and safety certifications including FCC, EN55022 Class A, EN61000 family standards, EN60950‑1, and IEC mechanical stress standards.

Manufacturer: Oring

Category: Industrial USB

The ISC‑8110U delivers eight RS‑232 ports through a single USB 2.0 interface, enabling high‑density serial connectivity for PCs, industrial controllers, and embedded systems. Key capabilities include full RS‑232 signaling support (TxD, RxD, RTS, CTS, DTR, DSR, DCD, GND), full‑duplex communication, and compatibility with legacy serial equipment. The converter integrates internal high‑speed transient suppressors on all serial data lines, providing 15 kV ESD protection. Dual power options allow the device to draw power directly from the USB bus or from redundant 12–48 VDC external inputs. Extended industrial temperature operation from –40°C to +70°C ensures stable functionality in harsh climates and demanding environments. Eight independent data transmission LEDs provide visual activity feedback for each serial channel, and a dedicated power status LED confirms operational state. Combined with its rugged IP‑30 metal enclosure, minimal footprint, and versatile mounting options, the ISC‑8110U is a high‑performance solution for industrial serial connectivity.

Manufacturer: Oring

Category: Industrial USB

Industrial Ethernet Device Server 1*10/100 TX to Serial 4*USB 1.0/1.1/2.0, event warning by syslog/email/SNMP trap/Relay/beeper, fixed TTY driver for Linux, Ethernet redundancy and recovery time

Manufacturer: Oring

Category: Industrial USB

- **Wireless Connectivity:** Supports IEEE 802.11b/g dual-mode operation with maximum wireless link speed of **54 Mbps**. - **High-Speed USB Performance:** Provides **four USB 2.0 ports**, each supporting data rates up to **480 Mbps** and delivering **500 mA downstream power** per port. - **Network Bridging:** Converts one **10/100Base-TX Ethernet port** or WLAN connection into four USB 2.0 device interfaces. - **Security:** Advanced wireless encryption including **WEP (64/128-bit)**, **WPA**, **WPA2 (802.11i)**, **TKIP**, and **AES** encryption with **256-bit pre-shared key** support. - **Industrial Design:** Rugged **IP-30 metal enclosure** with **DIN-rail** and **panel mounting** options for industrial environments. - **Redundant Power Inputs:** Dual **12–48 VDC** power inputs via 6-pin terminal block and power jack for high reliability. - **Event Warning System:** Supports event notifications via **Syslog**, **Email**, **SNMP Trap**, **Relay output**, and **Beeper**. - **Ethernet Redundancy:** Fast recovery time of **

Manufacturer: Oring

Category: Industrial USB

Industrial VPN Router LAN/WAN slim case, fast redundant Ethernet ring (recovery time less than 10ms over 250 units), alarm LED e-mail warning system log output, DIN-rail mounting, ESD 4kV DC Ethernet ports, surge 2000VDC power, 72*29,4*123,4mm, redundant dual power input, 12-48VDC (24V) 1A@12V, extended -10°..60°C operating temperature, Oring

Manufacturer: Oring

Category: Industrial USB

• Converts 10/100/1000Base‑T(X) copper Ethernet to 1000Base‑FX fiber • 1× RJ‑45 auto-negotiating 10/100/1000TX port • 1× SFP slot for 1000Base‑FX optical modules (LC-type) • Hot-swappable card design for easy replacement in operational systems • Industrial operating temperature range: –10°C to 60°C • Compact card form factor optimized for RMC‑1000 chassis integration • Low power consumption (~4.5 W) • Lightweight and robust construction for industrial environments • Supports multimode or single‑mode fiber via SFP (dependent on installed module) • Auto MDI/MDI‑X on copper port • High‑reliability industrial design with extended environmental tolerance

Manufacturer: Oring

Category: Rack Media Converter

• Supports 18 individual card‑type media converters • Full compatibility with RMC‑111PB, RMC‑111FB, and RMC‑121FB converter series • Each slot supports 10/100Base‑T(X) auto‑negotiation and auto‑MDI/MDI‑X • Supports single‑mode and multi‑mode 100Base‑FX optical fiber interfaces • Dual redundant power supply design, with optional dual 100–240 VAC inputs • Hot‑swappable converter modules and hot‑swappable power supplies • 19‑inch rack‑mount industrial chassis, designed for high‑density converter deployment • High reliability design suitable for harsh industrial conditions • Robust mechanical construction supporting vibration, shock, and free‑fall resilience • Wide environmental operating range: –10°C to 60°C • Wide storage temperature: –40°C to 85°C • Supports non‑condensing humidity from 5% to 95% • Internal power design prevents service interruption during power module removal • Straightforward installation and maintenance through modular architecture

Manufacturer: Oring

Category: Rack Media Converter

- **Media Conversion:** Converts 10/100Base-T(X) Ethernet (RJ-45) to 100Base-FX fiber (multi-mode, SC connector). - **Card-Type Design:** Compact module form factor for installation into the RMC-1000 chassis. - **Hot-Swappable:** Enables replacement or addition of modules without powering down the chassis. - **Industrial Temperature Range:** Operates reliably from **-10°C to +60°C (14°F to 140°F)**. - **Low Power Consumption:** Approximately **2.2 W** typical power usage. - **Compact and Lightweight:** Dimensions **21.8 × 73.1 × 126 mm**, weight approximately **0.140 kg**. - **High Reliability:** Designed for continuous operation in industrial environments. - **Auto-Negotiation and Auto-MDI/MDI-X:** Automatically detects link speed and cable type for copper Ethernet ports. - **Multi-Mode Fiber Support:** Optimized for short to medium distance fiber links using SC connectors. - **Integration with RMC-1000 Chassis:** Supports up to 18 converter cards in a single 19-inch rack-mount chassis. - **Dual Power Supply Redundancy (via RMC-1000):** Ensures uninterrupted operation in case of power failure. - **Compliance with Industrial Standards:** Meets EMI/EMS and environmental standards for industrial networking equipment.

Manufacturer: Oring

Category: Rack Media Converter

- **Ethernet-to-Fiber Conversion:** Converts one 10/100Base-T(X) RJ-45 copper port to one 100Base-FX single-mode SC fiber port. - **Card-Type Design:** Compact form factor for installation into the RMC-1000 chassis system. - **Hot-Swappable Module:** Enables replacement or addition of converter cards without powering down the chassis. - **Industrial Temperature Range:** Operates reliably from **-10°C to +60°C (14°F to 140°F)**. - **Low Power Consumption:** Typical power usage of approximately **2.2 W**. - **Compact and Lightweight:** Dimensions **21.8 × 73.1 × 126 mm**, weight approximately **0.140 kg**. - **High Reliability:** Designed for continuous operation in industrial environments with redundant power support when used in the RMC-1000 chassis. - **Auto-Negotiation and Auto-MDI/MDI-X:** Automatically detects link speed and cable type for plug-and-play operation. - **Single-Mode Fiber Support:** SC connector type for long-distance fiber transmission. - **Compliance with Industrial Standards:** Meets FCC, CISPR, and EN61000 series EMC/EMS standards. - **Rack-Mount Integration:** Compatible with the **RMC-1000 19-inch rack-mount chassis**, supporting up to 18 converter cards. - **Dual Power Supply Redundancy (via chassis):** Ensures uninterrupted operation in case of power source failure.

Manufacturer: Oring

Category: Rack Media Converter

- **Media Conversion:** Converts 1 × 10/100Base-T(X) (RJ-45) Ethernet port to 1 × 100Base-FX (SFP slot / LC connector). - **Card-Type Design:** Compact modular form factor for installation in the RMC-1000 chassis. - **Hot-Swappable:** Enables replacement or addition of modules without system downtime. - **Auto-Negotiation:** Supports 10/100 Mbps auto-negotiation and auto-MDI/MDI-X for copper ports. - **Flexible Fiber Options:** Compatible with both single-mode and multi-mode fiber via SFP transceivers. - **Industrial-Grade Reliability:** Designed for continuous operation in harsh environments with extended temperature tolerance. - **Low Power Consumption:** Typical power usage of approximately 4.5 W per module. - **Compact and Lightweight:** Dimensions of 21.8 × 73.1 × 126 mm and weight of approximately 0.137 kg. - **Wide Operating Temperature:** -10°C to +60°C operating range for industrial deployment. - **Integration Ready:** Fully compatible with ORing’s RMC-1000 19-inch rack-mount chassis system. - **Redundant Power Support:** When installed in the RMC-1000 chassis, benefits from dual power supply redundancy. - **Ease of Maintenance:** Modular design simplifies installation, replacement, and scalability.

Manufacturer: Oring

Category: Rack Media Converter

- **Dual Copper to Fiber Conversion:** Converts two 10/100Base-TX (RJ-45) Ethernet ports to one 100Base-FX multimode SC fiber port. - **Hot-Swappable Card Design:** Enables easy insertion and removal from the RMC-1000 chassis without system downtime. - **Industrial Temperature Range:** Operates reliably from **-10°C to +60°C**, suitable for harsh industrial environments. - **Compact Card Form Factor:** Dimensions of **21.8 × 73.1 × 126 mm**, optimized for high-density rack installations. - **Low Power Consumption:** Typical power usage of approximately **2.2 W**, ensuring energy-efficient operation. - **Lightweight Construction:** Weighs approximately **0.145 kg**, facilitating easy handling and installation. - **High Reliability:** Designed for continuous operation with redundant power supply support when used in the RMC-1000 chassis. - **Auto-Negotiation and Auto-MDI/MDI-X:** Automatically detects link speed and cable type for plug-and-play connectivity. - **Multi-Mode Fiber Support:** Compatible with multimode optical fiber for medium-distance transmission (typically up to 2 km). - **SC Fiber Connector Interface:** Standard SC connector ensures secure and stable fiber connections. - **Rack-Mount Integration:** Fully compatible with the **RMC-1000** 19-inch rack chassis, supporting up to 18 converter cards. - **Dual Power Supply Redundancy (via chassis):** Ensures uninterrupted operation in case of power source failure. - **Compliance with Industrial Standards:** Meets FCC, CISPR, and EN61000 series EMC/EMS standards for electromagnetic compatibility.

Manufacturer: Oring

Category: Rack Media Converter

- **Dual 10/100Base-TX to Single 100Base-FX Conversion:** Converts two RJ-45 Ethernet ports (10/100 Mbps) to one fiber-optic port (100 Mbps FX, single-mode, SC connector). - **Hot-Swappable Card Design:** Enables easy insertion and removal from the RMC-1000 chassis without system downtime, supporting continuous operation and simplified maintenance. - **Industrial Temperature Range:** Operates reliably in environments from **-10°C to +60°C (14°F to 140°F)**, suitable for industrial and field applications. - **Compact and Lightweight:** Card dimensions of **21.8 × 73.1 × 126 mm** and weight of approximately **0.145 kg**, allowing high-density installation within rack systems. - **Low Power Consumption:** Typical power usage of **~2.2 W**, ensuring energy-efficient operation. - **High Reliability and Redundancy:** When used with the RMC-1000 chassis, benefits from dual power supply redundancy, minimizing downtime due to power failure. - **Flexible Fiber Options:** Supports **single-mode fiber** with **SC connector**, enabling long-distance data transmission over optical fiber. - **Auto-Negotiation and Auto-MDI/MDI-X:** Automatically detects link speed and cable type, simplifying network configuration and reducing installation complexity. - **Industrial-Grade Design:** Built for durability and stability under vibration, shock, and temperature variations typical of industrial environments.

Manufacturer: Oring

Category: Rack Media Converter

The FTC‑6011 provides long‑distance serial‑to‑fiber conversion with advanced protection features and automatic interface optimization. Key capabilities include: • Multi‑protocol serial support: RS‑232, RS‑422, and RS‑485 (2‑wire and 4‑wire) • Auto‑Detect & Switch for RS‑422/485 interfaces • SUNIX AHDC/CS™ Auto Hardware Direction Control / Carrier Sense for RS‑485 signaling • Auto baud rate detection supporting dynamic environments and device changes • Fiber communication range up to 80 km depending on fiber type • Surge protection: 600 W power surge protection • 15 kV embedded ESD protection • 2.5 kV optical isolation • Redundant dual‑input power system with reverse polarity protection • Aluminum IP30 industrial enclosure designed for vibration, shock, and extreme temperature resistance • DIN rail and wall‑mount installation options • Wide operating temperature range (-20 to 75°C, extended -40 to 80°C per series specifications)

Manufacturer: Sunix

Category: Industrial Media Converter

• Converts RS‑485 serial communication to fiber optic transmission • Compatible with standard industrial multi‑mode (2 km) and single‑mode (30 km or up to 80 km extended) fiber • Auto baud rate detection supporting speeds up to 460.8 kbps for RS‑485 communication • Automatic RTS Direction Control via SUNIX AHDC/CS technology for 2‑wire RS‑485 • Embedded 15 kV ESD protection and 600 W surge protection for improved durability • 2.5 kV optical isolation safeguarding connected systems from ground loops and electrical noise • Redundant power input system supporting 12–48 V DC with reverse polarity protection • Rugged, shock‑proof alloy/ABS casing with IP30 protection level • Designed for extreme environments: operational temperature −20°C to 75°C • DIN rail and wall‑mount compatibility for flexible installation • Low power consumption below 2.4 W (approx. 200 mA @ 12 V)

Manufacturer: Sunix

Category: Industrial Media Converter

• Converts 10/100/1000Base‑T(X) copper Ethernet to 1000Base‑SX/LX fiber • Supports multimode (50/125 μm, up to 2 km) and single‑mode fiber (9/125 μm, up to 30 km) • Rugged industrial design, IP30 aluminum enclosure • Supports redundant dual power inputs (12–48 VDC) with reverse power protection • Integrated alarm relay output for fault signaling • Surge protection, optical isolation (system‑level), high immunity to ESD and voltage disturbances • DIN‑rail and wall‑mount installation options • Supports extended operating temperatures from −40 °C to 80 °C • Implements SUNIX AHDC/CS™ technologies within associated converter families (direction control features for serial products; general platform robustness and auto‑sense logic) • High EMI/ESD resilience, meeting industrial EMC standards • Compact industrial form factor (30 × 68.5 × 105 mm)

Manufacturer: Sunix

Category: Industrial Media Converter

The FTL‑1218H‑MMC integrates multiple industrial‑grade features, including: • 10/100Base‑TX to 100Base‑FX optical conversion using SC multi‑mode fiber. • Multi‑mode fiber support for 50/125 µm cable with standard transmission distances up to 2 km. • Rugged metal IP30‑rated enclosure suitable for harsh industrial environments. • Dual power inputs supporting 12–48 VDC via terminal block and a 12 VDC jack, ensuring redundancy and operational reliability. • Built‑in reverse power protection to prevent damage from incorrect wiring. • Configurable alarm relay output for event signaling and remote monitoring. • DIN‑rail and wall‑mounting support for flexible industrial installation. • Extended industrial protections including ESD protection, surge resistance, optical isolation characteristics, and mechanical shock and vibration resistance according to IEC standards. • Operating temperature range of 0°C to +60°C, supporting standard industrial temperature environments. • Compact design optimized for dense cabinet installations.

Manufacturer: Sunix

Category: Industrial Media Converter

• Converts 10/100Base‑TX Ethernet to 100Base‑FX fiber. • Multimode fiber support using 50/125 µm cable. • Standard SC fiber port for 100Base‑FX links. • Designed for industrial applications requiring high immunity and long‑distance communication. • Extended operating temperature range from ‑40°C to +85°C. • DIN rail mountable metal IP30 enclosure for harsh environments. • Dual redundant power inputs (12–48 VDC terminal block and 12 VDC DC jack). • Configurable relay alarm output for fault monitoring. • Integrated surge protection, optical isolation protection, and reverse power protection. • Link Fault Signaling enables systems to react to line loss or interruptions. • Auto negotiation and compatibility with 10/100 Mbps copper Ethernet. • High immunity against EMI/RFI disruptions common in industrial areas. • Compact industrial form factor suited for panels, cabinets, and field deployments.

Manufacturer: Sunix

Category: Industrial Media Converter

• Converts 10/100Base‑TX Ethernet to 100Base‑FX fiber • Single‑mode fiber 9/125 μm with SC connector • Transmission distance up to 40 km • Industrial‑grade aluminum enclosure with IP30 protection • Dual redundant power input: 12–48 VDC on terminal block and 12 VDC DC jack • Low power consumption: 1 A @ 12 VDC • Operating temperature: 0°C to +60°C (standard industrial rating) • Integrated alarm relay output (configurable) • DIN‑rail and wall‑mount options • RJ45 Ethernet port and fiber SC port • High EMI/ESD protection levels • Reverse power protection • Surge protection, optical isolation, and enhanced electrical immunity • Supports Link Fault Signaling for network event detection • Compact form factor: 30 × 68.5 × 105 mm • Rugged metal chassis designed for continuous industrial operation • Sunix AHDC/CS Technology (Auto Hardware Direction Control/Carrier Sense) applicable across the product line • Designed for long‑distance, high‑integrity fiber communication in harsh environments

Manufacturer: Sunix

Category: Industrial Media Converter

• Converts 10/100Base‑TX (copper) to 100Base‑FX (fiber) • Single‑mode fiber operation using 9/125 µm fiber with SC connector • Fiber distance support up to 40 km (product description) or typical SUNIX standard single‑mode specification up to 30 km depending on installation • Industrial extended‑temperature range: -40°C to +85°C • Designed for harsh industrial environments with shock‑proof, corrosion‑resistant IP30 aluminum housing • Surge protection, optical isolation protection, reverse power protection • Dual redundant power input: 12–48 VDC via terminal block and 12 VDC jack • Current consumption 1A @ 12 VDC • Automatically detects serial baud rates (relevant to SUNIX media converter technology family) • Configurable alarm relay output for fault notification • Link Fault Signaling support enabling network applications to react to fiber or copper link failures • DIN rail and wall mount options • High immunity against electromagnetic interference and ground potential differences • Auto-detection and switching technologies derived from SUNIX RS-422/485 mechanisms integrated into product family design • Rigid mechanical construction for high vibration, impact, and extreme temperature operational reliability • Packet length supported: 64 to 1522 bytes • Benefits of fiber optics: longer distance extension, higher bandwidth, immunity, enhanced data integrity • EMI/ESD protection integrated into communication circuitry • Designed for continuous 24/7 industrial operation

Manufacturer: Sunix

Category: Industrial Media Converter

Industrial grade RS-232 to Fiber SC/ST media converter, auto baud rate detection, up to 460,8kbps, 15kV embedded ESD surge protection, 12..48V DC

Manufacturer: Sunix

Category: Industrial Media Converter

Optical bypass switch with 4*FX duplex MM LC connector, networks ports and monitor ports, dual 12..48VDC in, ~2,7W, 26,1*94,9*144,3mm, ~0,405kg, Oring

Manufacturer: Oring

Category: Industrial Media Converter

- **Optical Bypass Functionality:** Supports automatic optical bypass switching for 2-port duplex or 4-port simplex fiber connections, ensuring uninterrupted network operation during power loss or device failure. - **High-Speed Compatibility:** Compatible with 100 Mbps, 1 Gbps, and 10 Gbps fiber Ethernet networks, making it suitable for a wide range of industrial and enterprise applications. - **Single-Mode Fiber Support:** Equipped with 4×LC duplex single-mode connectors (9/125 µm fiber), supporting wavelengths from 1260 nm to 1570 nm. - **Fast Switching Time:** Bypass switching time is less than 10 milliseconds, minimizing network downtime during transitions between normal and bypass modes. - **Low Insertion Loss:** Typical insertion loss of 1.2 dB (maximum 1.6 dB), ensuring minimal signal degradation and maintaining high data throughput. - **Dual Power Inputs:** Redundant 12–48 VDC power inputs via both DC jack and 4-pin terminal block, providing power reliability and flexibility in industrial installations. - **Relay Output for Power Failure Warning:** Integrated relay output (1A @ 24VDC) for external alarm or monitoring systems to indicate power failure conditions. - **Rugged Industrial Design:** IP-30-rated metal housing for protection against dust and mechanical impact, suitable for DIN-rail or wall-mounted installation. - **Wide Operating Temperature Range:** Designed for operation in extreme environments, with a temperature range from -20°C to +70°C. - **Comprehensive LED Indicators:** Includes Power (P1, P2), Normal Mode, and Fault LEDs for clear visual status monitoring. - **Compact and Lightweight:** Slim form factor (26.1 × 94.9 × 144.3 mm) and lightweight (405 g) design for easy integration into control cabinets or network racks.

Manufacturer: Oring

Category: Industrial Media Converter

- **Gigabit Ethernet Conversion:** Converts 10/100/1000Base-T(X) copper Ethernet to 1000Base-X fiber Ethernet. - **Multi-Mode Fiber Support:** Equipped with a 1000Base-SX multi-mode fiber port (850 nm wavelength, SC connector) supporting transmission distances up to 550 meters. - **Auto-Negotiation and Auto-MDI/MDI-X:** Automatically detects link speed and cable type for simplified installation. - **Dual Power Inputs:** Redundant 12–48 VDC power inputs via a 6-pin terminal block ensure continuous operation even if one power source fails. - **Relay Output Alarm:** Configurable relay output (1A at 24 VDC) for power failure or fault condition notification. - **Rugged Industrial Design:** IP-30 rated metal enclosure for protection against dust and mechanical impact. - **Wide Operating Temperature Range:** Designed for extreme environments, operating from -40°C to +70°C. - **DIN-Rail and Wall Mounting:** Flexible installation options for industrial control cabinets or panels. - **Low Power Consumption:** Typical power usage of only 3.5 W for energy-efficient operation. - **Comprehensive LED Indicators:** Provides clear visual status for power, link/activity, and fault conditions. - **High Reliability:** Designed for continuous operation in mission-critical industrial networks. - **Standards Compliance:** Fully compliant with IEEE 802.3 Ethernet standards and international EMC and safety regulations. - **5-Year Warranty:** Long-term reliability backed by ORing’s extended warranty coverage.

Manufacturer: Oring

Category: Industrial Media Converter

Gigabit 10/100/1000Base TX Ethernet to 1000Base FX Fiber SC media converter, Single Mode 9/125µm up to 40km, serial port RJ45, Alarm Relay out configurable, 12..48VDC in, dual power input, DIN rail mountable, extended operating temperature -40°..+70°C, 33*144,5*95mm, ~400gr, ~3,5W, Oring

Manufacturer: Oring

Category: Industrial Media Converter