- **Universal 16‑Channel Thermocouple/Analog Input:** Accepts direct connection of J, K, T, E, R, S, B, N thermocouples or low‑level voltage signals (±100 mV to ±10 V). - **High‑Resolution Data Acquisition:** 16‑bit A/D conversion with 2.5 samples per second per channel ensures precise measurement for temperature and voltage inputs. - **Cold Junction Compensation (CJC):** Integrated temperature sensor provides automatic cold‑junction compensation for thermocouple accuracy. - **Independent Channel Configuration:** Each channel can be individually configured for input type and range via Modbus registers. - **Sensor Burn‑Out and Disconnection Detection:** Detects open‑circuit or failed sensors to prevent erroneous readings and unsafe control actions. - **Electrical Isolation:** 3 kV DC isolation between power, communication, and I/O circuits protects against ground loops and industrial noise. - **Wide Power Supply Range:** Operates from **+10 V DC to +60 V DC** with reverse‑polarity protection; ripple peak ≤ 5 V. - **Hot‑Swap and Auto‑Configuration:** Modules can be replaced without rewiring; configuration stored in removable EEPROM for quick restoration. - **Compact, Space‑Saving Design:** Slim 47.2 mm vertical housing allows dense DIN‑rail installation—up to 1.5× more modules per panel than flat‑mounted competitors. - **User‑Friendly Setup:** Modbus node address set by dual rotary switches (1–247); no PC required. - **Diagnostic LEDs:** Three front‑panel LEDs indicate power, communication, and system status for rapid on‑site troubleshooting. - **Programmable Power‑On and Safety Values:** Ensures controlled startup and safe fallback states during communication loss. - **Rugged Industrial Reliability:** Built‑in hardware and software watchdogs automatically recover from transient faults or host communication failures. - **Modbus/RTU Compatibility:** Fully compliant with standard Modbus RTU protocol; baud rates selectable from 1200 bps to 115.2 kbps.

Manufacturer: Advanio

Category: Ethernet / USB / RS485 / RS232 Modbus IO

- **Eight Differential Current Input Channels:** Each channel independently configurable for ±20 mA, 4–20 mA, or 0–20 mA input ranges. - **High‑Resolution Conversion:** 16‑bit A/D resolution with 2.5 samples/s per channel sampling rate. - **High Accuracy:** ±0.1 % of full‑scale range (FSR). - **Wide Power Supply Range:** Operates from +10 V DC to +60 V DC (ripple ≤ 5 V p‑p). - **Robust Isolation:** 3 kV DC isolation between power, communication, and I/O circuits. - **Input Protection:** ±35 V over‑voltage protection and 120 Ω input impedance per channel. - **Hot‑Swap and Auto‑Configuration:** Modules can be replaced without rewiring; configuration stored in removable EEPROM. - **Sensor Disconnection Detection:** Detects open‑loop or failed 4–20 mA transmitters. - **Programmable Power‑On and Safety Values:** Ensures safe system states during startup or communication loss. - **Compact Form Factor:** 47.2 mm slim vertical housing for space‑constrained control panels. - **Simple Node Addressing:** Two rotary switches for Modbus address setup (1–247). - **LED Diagnostics:** Three front LEDs indicate power, communication, and system status. - **Wide Baud Rate Range:** 1200 bps to 115.2 kbps, configurable parity (N, E, O). - **Industrial Reliability:** Built‑in hardware and system watchdogs for automatic recovery from faults. - **EMC‑Certified Design:** Complies with CE and FCC Part 15 standards for EMI/EMS immunity. - **Long‑Term Warranty:** 5‑year manufacturer warranty.

Manufacturer: Advanio

Category: Ethernet / USB / RS485 / RS232 Modbus IO

- **16 Independent Current Input Channels:** Each channel configurable for ±20 mA, 4–20 mA, or 0–20 mA input ranges. - **High‑Resolution Conversion:** 16‑bit A/D resolution with 2.5 samples per second per channel. - **High Accuracy:** ±0.1 % of Full‑Scale Range (FSR). - **Wide Power Input Range:** Operates from +10 V DC to +60 V DC (ripple ≤ 5 V p‑p). - **Robust Isolation:** 3 kV DC isolation between power, communication, and I/O circuits. - **Input Protection:** ±35 V overvoltage protection and 240 V channel‑to‑channel isolation. - **Hot‑Swap and Auto‑Configuration:** Modules can be replaced without rewiring; configuration stored in removable EEPROM. - **Programmable Power‑On and Safety Values:** Ensures safe system states during startup or communication loss. - **Sensor Disconnection Detection:** Detects open‑loop or failed sensors in 4–20 mA mode. - **Compact Design:** Slim 47.2 mm vertical housing for space‑constrained installations. - **Easy Node Addressing:** Dual rotary switches for Modbus node address (1–247). - **LED Diagnostics:** Three front‑panel LEDs indicate power, communication, and system status. - **Wide Temperature Range:** Operates from −25 °C to +70 °C. - **Industrial‑Grade Reliability:** Built‑in hardware and system watchdogs for self‑recovery. - **Modbus/RTU Compatibility:** Baud rates from 1200 bps to 115.2 kbps. - **5‑Year Warranty:** Long‑term reliability assurance.

Manufacturer: Advanio

Category: Ethernet / USB / RS485 / RS232 Modbus IO

- **Eight Differential Analog Voltage Inputs:** Each channel independently configurable for ±1 V, ±5 V, ±10 V, 0–1 V, 0–5 V, or 0–10 V ranges. - **High Resolution and Accuracy:** 16‑bit A/D conversion with ±0.1 % of full‑scale accuracy. - **Channel‑to‑Channel Isolation:** Input protection up to ±35 V and 3 kV isolation between I/O, power, and communication circuits. - **Independent Channel Configuration:** Each channel can be set individually for different voltage ranges. - **Sensor Disconnection Detection:** Built‑in detection of open‑circuit or failed sensor conditions. - **Hot‑Swap and Auto‑Configuration:** Modules can be replaced without rewiring; configuration stored in removable EEPROM. - **Programmable Power‑On and Safety Values:** Ensures safe system states during startup or communication failure. - **Wide Power Supply Range:** Operates from +10 VDC to +60 VDC (ripple ≤ 5 V p‑p). - **Compact, Space‑Saving Design:** 47.2 mm slim vertical housing for dense DIN‑rail installations. - **Easy Node Addressing:** Two rotary switches for Modbus node address (1–247). - **LED Diagnostics:** Three front LEDs indicate power, communication, and system status. - **Industrial‑Grade Reliability:** EMC‑tested, with watchdog timers and fault recovery mechanisms. - **Modbus/RTU Communication:** Baud rates selectable from 1200 bps to 115.2 kbps. - **Operating Temperature:** −25 °C to +70 °C for harsh industrial environments. - **Low Power Consumption:** 1.6 W at 24 VDC. - **5‑Year Warranty:** Long‑term reliability assurance.

Manufacturer: Advanio

Category: Ethernet / USB / RS485 / RS232 Modbus IO

- **16 Independent Analog Input Channels:** Each channel can be configured independently for voltage ranges of ±1 V, ±5 V, ±10 V, or 0–1/5/10 V. - **High Resolution and Accuracy:** 16‑bit A/D conversion with ±0.1 % FSR accuracy and 2.5 samples/s per channel. - **Wide Input Protection:** ±35 V overvoltage protection and 240 V channel‑to‑channel isolation safeguard against wiring errors and ground potential differences. - **Industrial‑Grade Isolation:** 3 kV DC isolation between power, communication, and I/O circuits ensures reliable operation in noisy environments. - **Flexible Power Supply:** Operates from +10 V DC to +60 V DC (ripple ≤ 5 V p‑p). - **Hot‑Swap and Auto‑Configuration:** Modules can be replaced without rewiring; configuration is stored in a removable EEPROM for quick restoration. - **Programmable Power‑On and Safety Values:** Ensures defined output states during startup or communication failure. - **Easy Node Addressing:** Two rotary switches allow Modbus node address setup (1–247) without software tools. - **LED Diagnostics:** Three front‑panel LEDs indicate power, communication, and system status for quick on‑site troubleshooting. - **Compact, Space‑Saving Design:** 47.2 mm slim vertical housing allows dense DIN‑rail installation. - **Rugged Industrial Reliability:** Built‑in hardware and system watchdogs automatically recover from communication or system faults. - **Modbus RTU Compatibility:** Standard RS‑485 interface supports baud rates from 1200 bps to 115.2 kbps and communication distances up to 1.2 km. - **Wide Operating Temperature:** −25 °C to +70 °C for harsh industrial environments. - **5‑Year Warranty:** Long‑term reliability backed by Advanio’s extended warranty program.

Manufacturer: Advanio

Category: Ethernet / USB / RS485 / RS232 Modbus IO

- **Multi‑Sensor RTD Support:** Compatible with Pt100 (IEC 0.00385 / JIS 0.00392), Pt1000, Cu100, Cu1000, Cu50, Ni100, Ni120, Ni507.5, Ni604, and BALCO 500 sensors. - **Six Independent Channels:** Each channel uses a discrete A/D converter for improved accuracy and channel‑to‑channel isolation. - **High Electrical Isolation:** 3 kV DC isolation between power, communication, and I/O circuits. - **Overvoltage Protection:** ±55 V input protection and 240 V channel‑to‑channel dielectric protection. - **Disconnection Detection:** Automatic sensor break/failure detection for safety‑critical applications. - **Hot‑Swap and Auto‑Configuration:** Modules can be replaced without rewiring; configuration is restored via removable EEPROM. - **Programmable Power‑On and Safety Values:** Ensures safe system states during startup or communication loss. - **Wide Power Input Range:** Operates from +10 V DC to +60 V DC (ripple ≤ 5 V p‑p). - **Compact, Space‑Saving Design:** 47.2 mm slim vertical housing for dense DIN‑rail installations. - **Easy Node Addressing:** Two rotary switches for Modbus node address (1–247). - **LED Diagnostics:** Three front‑panel LEDs indicate power, communication, and system status. - **Industrial‑Grade Reliability:** Built‑in hardware and system watchdogs for self‑recovery from communication or host failures. - **Wide Operating Temperature:** −25 °C to +70 °C operation, −30 °C to +75 °C storage. - **Modbus/RTU Communication:** Baud rates from 1200 bps to 115.2 kbps; maximum cable length 1.2 km. - **Low Power Consumption:** 1.6 W @ 24 V DC typical. - **5‑Year Warranty:** Long‑term reliability assurance for industrial deployments.

Manufacturer: Advanio

Category: Ethernet / USB / RS485 / RS232 Modbus IO

- **8 Differential Analog Input Channels:** Each channel independently configurable for voltage or current measurement. - **Wide Input Range:** ±100 mV / ±500 mV / ±1 V / ±5 V / ±10 V and 0–100 mV / 0–500 mV / 0–1 V / 0–5 V / 0–10 V / ±20 mA / 4–20 mA / 0–20 mA. - **High Resolution and Accuracy:** 16‑bit A/D conversion, 2.5 samples per second per channel, ±0.1 % FSR accuracy. - **Channel‑to‑Channel Isolation and Protection:** 240 V common‑mode voltage protection and ±240 V input over‑voltage protection. - **3 kV Isolation Barrier:** Isolation between I/O, power, and communication circuits for industrial noise immunity. - **Hot‑Swap and Auto‑Configuration:** Modules can be replaced without rewiring; EEPROM retains configuration parameters. - **Programmable Power‑On and Safety Values:** Ensures safe output states during power up or communication failure. - **Wide Power Input Range:** +10 to +60 V DC with reverse polarity protection and ripple tolerance ≤ 5 V p‑p. - **Compact Slim Design:** 47.2 mm width for space‑saving DIN‑rail mounting. - **Easy Modbus Node Address Setting:** Two rotary switches for address selection (1–247). - **LED Diagnostics:** Three status LEDs for power, system, and communication indication. - **Sensor Disconnection Detection:** Automatic fault detection for open sensor circuits. - **Watchdog Timers:** Hardware (module) and software (system) watchdogs for fail‑safe operation. - **Industrial Grade Reliability:** Designed for continuous operation in ‑25 °C to +70 °C environments. - **Modbus RTU Protocol:** Standard RS‑485 communication compatible with PLC, PAC, and SCADA systems. - **5‑Year Warranty:** Extended manufacturer support for industrial applications.

Manufacturer: Advanio

Category: Ethernet / USB / RS485 / RS232 Modbus IO

- **High‑Density Analog Input:** 16 differential analog input channels supporting voltage and current measurement ranges with ±240 V common‑mode protection. - **Universal Input Configuration:** Each channel independently configurable for ±100 mV, ±500 mV, ±1 V, ±5 V, ±10 V, 0–100 mV, 0–500 mV, 0–1 V, 0–5 V, 0–10 V, ±20 mA, 0–20 mA, or 4–20 mA via DIP switch. - **High Accuracy and Resolution:** 16‑bit A/D conversion with ±0.1 % FSR accuracy and 2.5 samples/s per channel sampling rate. - **Robust Electrical Protection:** Channel‑to‑channel isolation and over‑voltage protection up to ±240 V; common‑mode voltage tolerance up to 240 V; 3 kV isolation between I/O, power, and communication. - **Wide Power Input Range:** Operates from +10 V DC to +60 V DC (ripple ≤ 5 V p‑p), consuming approximately 2.8 W @ 24 V DC. - **Hot‑Swap and Auto‑Configuration:** Modules can be replaced without rewiring; configuration stored in removable EEPROM for quick transfer between units. - **Programmable Power‑On and Safety Values:** Ensures safe startup and fail‑safe operation during communication loss or watchdog timeout. - **Simple Node Addressing:** Two rotary switches allow Modbus node address setup (1–247) without software tools. - **Diagnostic LEDs:** Three front‑panel LEDs indicate power, communication, and system status for quick on‑site troubleshooting. - **Compact, Space‑Saving Design:** 47.2 mm slim vertical housing allows 1.5× higher module density compared to conventional flat I/O modules. - **Industrial‑Grade Reliability:** Designed for harsh environments with operating temperature –25 °C to +70 °C, humidity 5–95 % RH, and built‑in hardware/software watchdogs. - **Communication Interface:** RS‑485 serial interface supporting Modbus/RTU protocol, baud rates from 1200 bps to 115.2 kbps, and communication distance up to 1.2 km.

Manufacturer: Advanio

Category: Ethernet / USB / RS485 / RS232 Modbus IO

- **Eight Isolated Analog Output Channels:** Each channel supports multiple voltage and current output ranges, including ±5 V, ±10 V, 0–5 V, 0–10 V, 0–20 mA, and 4–20 mA. - **Programmable Output Slope:** Adjustable output ramp rate for voltage (0.0625 – 512 V/s) and current (0.125 – 1024 mA/s) to ensure smooth transitions and prevent sudden load changes. - **High Isolation Protection:** 3000 V DC isolation between power, communication, and I/O channels for enhanced safety and noise immunity. - **Wide Power Supply Range:** Operates from +10 V DC to +60 V DC with reverse polarity protection; ripple peak must not exceed 5 V. - **Compact, Space‑Saving Design:** Slim 47.2 mm vertical housing allows dense installation on DIN rails, increasing module density by up to 1.5× compared to conventional flat‑mount I/O devices. - **Industrial‑Grade Reliability:** Designed for continuous operation in harsh environments with built‑in hardware and software watchdogs to recover from communication or system faults. - **Hot‑Swap and Auto‑Configuration:** Modules can be replaced without rewiring; configuration data stored in removable EEPROM for quick restoration. - **Ease of Installation and Maintenance:** Rotary switches for Modbus node addressing, front‑facing terminal blocks, and LED indicators for power, communication, and system diagnostics. - **Flexible Communication:** RS‑485 interface supporting Modbus/RTU protocol with baud rates from 1200 bps to 115.2 kbps and communication distances up to 1.2 km. - **Programmable Power‑On and Safety Values:** User‑defined startup and fail‑safe output states to protect connected actuators during power‑up or communication loss. - **Long‑Term Warranty:** Backed by a 5‑year manufacturer warranty, reflecting Advanio’s confidence in product durability.

Manufacturer: Advanio

Category: Ethernet / USB / RS485 / RS232 Modbus IO

- **16 Isolated Digital Inputs:** Supports both dry and wet contact modes for flexible integration with sensors, switches, and logic signals. - **Dry/Wet Configurable Inputs:** - *Dry Contact:* Logic 0 = open, Logic 1 = closed to GND. - *Wet Contact:* Logic 0 ≤ 3 V DC, Logic 1 = 10 – 50 V DC. - **High Isolation:** 2.5 kV DC isolation between channels and system logic for noise immunity and protection. - **DI Latch Function:** Captures transient input pulses ≥ 5 ms to ensure reliable detection of short‑duration events. - **Integrated Counter Function:** 16‑bit counters on each channel, up to 100 Hz input frequency. - **Normal/Inverted Logic Selection:** Each input can be configured as normal or inverted for compatibility with existing control logic. - **Hot‑Swap and Auto‑Configuration:** Modules can be replaced without rewiring; configuration stored in removable EEPROM for quick recovery. - **Rotary Switch Addressing:** Two rotary switches allow simple Modbus node address setup (1 – 247). - **Wide Power Input Range:** +10 V DC to +60 V DC (ripple ≤ 5 V p‑p). - **Compact Form Factor:** 47.2 mm slim vertical housing for space‑constrained installations. - **LED Diagnostics:** Three front‑panel LEDs indicate power, communication, and system status for quick on‑site troubleshooting. - **Programmable Safety Values:** User‑defined safe states on power‑on or communication failure. - **Watchdog Protection:** Hardware and software watchdogs ensure automatic recovery from communication or system faults. - **Industrial‑Grade Design:** Operating temperature –25 °C to +70 °C; humidity 5 – 95 % RH; EMC‑tested for EMI/EMS compliance. - **Modbus/RTU Communication:** Standard RS‑485 interface supporting baud rates from 1200 bps to 115.2 kbps. - **Long‑Distance Communication:** Up to 1.2 km over RS‑485 network; supports daisy‑chain, star, or mixed topologies. - **5‑Year Warranty:** Extended manufacturer warranty ensuring long‑term reliability.

Manufacturer: Advanio

Category: Ethernet / USB / RS485 / RS232 Modbus IO

- **32 Isolated Digital Inputs:** Supports both dry and wet contact configurations for maximum flexibility. - **Dry/Wet Input Modes:** - *Dry contact:* Logic 0 = open, Logic 1 = closed to GND. - *Wet contact:* Logic 0 = ≤ 3 V DC, Logic 1 = 10 – 50 V DC. - **DI Latch Function:** Captures transient signals ≥ 5 ms to prevent missed pulses during polling. - **DI Counter Function:** 16‑bit hardware counter per channel, up to 100 Hz input frequency. - **Normal/Inverted Logic:** Each channel can be configured as normal or inverted for compatibility with existing control logic. - **Hot‑Swap & Auto‑Configuration:** Modules can be replaced without rewiring; configuration stored in removable EEPROM. - **Rotary Switch Addressing:** Two hexadecimal rotary switches allow quick Modbus node address setup (1 – 247). - **Wide Power Input Range:** +10 V DC to +60 V DC with reverse‑polarity protection; ripple ≤ 5 V p‑p. - **High Isolation:** 2.5 kV DC isolation between I/O, power, and communication circuits. - **Compact Form Factor:** 47.2 mm slim vertical housing for space‑constrained control panels. - **LED Diagnostics:** Three front LEDs indicate power, communication, and system status for easy on‑site troubleshooting. - **Watchdog Protection:** Hardware and software watchdogs ensure automatic recovery from communication or system faults. - **Programmable Safety Values:** User‑defined safe states on power‑up or communication failure. - **Industrial‑Grade Design:** EMC‑tested for EMI/EMS immunity; operating temperature –25 °C to +70 °C. - **Modbus/RTU Protocol:** Standard RS‑485 communication up to 115.2 kbps, 1.2 km bus length. - **5‑Year Warranty:** Long‑term reliability backed by Advanio’s extended warranty program.

Manufacturer: Advanio

Category: Ethernet / USB / RS485 / RS232 Modbus IO

- **16 Isolated NPN Digital Outputs:** Each channel supports up to 500 mA load current with 3.5 – 30 V DC output range. - **RS‑485 Modbus/RTU Communication:** Standard industrial serial interface supporting baud rates from 1200 bps to 115.2 kbps and communication distances up to 1.2 km. - **Hot‑Swap and Auto‑Configuration:** Modules can be replaced without rewiring; configuration parameters are stored in a removable EEPROM for quick restoration. - **Programmable Power‑On and Safety Values:** User‑defined startup and fail‑safe output states ensure predictable behavior during power‑up or communication loss. - **High Isolation Protection:** 2.5 – 3.0 kV DC isolation between power, communication, and I/O circuits protects against industrial noise and surges. - **Wide Power Supply Range:** Operates from +10 V DC to +60 V DC (ripple ≤ 5 V p‑p), compatible with 12 V, 24 V, 36 V, and 48 V systems. - **Compact, Space‑Saving Design:** 47.2 mm slim vertical housing allows dense installation on DIN rails; up to 1.5 × more modules per panel compared to flat designs. - **Easy Node Addressing:** Two rotary switches set Modbus node address (1 – 247) without software tools. - **LED Diagnostics:** Three front‑panel LEDs indicate power, communication, and system status for quick on‑site troubleshooting. - **Rugged Industrial Reliability:** Built‑in hardware and system watchdogs automatically recover from communication or system faults. - **Modular Mounting System:** Detachable DIN‑rail base with integrated power and bus connectors simplifies installation and expansion. - **5‑Year Warranty:** Long‑term reliability backed by Advanio’s extended warranty and global support network.

Manufacturer: Advanio

Category: Ethernet / USB / RS485 / RS232 Modbus IO

- **High‑Density Digital Output:** 32 isolated NPN (sinking) output channels for controlling actuators, relays, and indicators. - **RS‑485 Modbus/RTU Communication:** Standard industrial serial interface supporting baud rates from 1200 bps to 115.2 kbps. - **Easy Node Addressing:** Two rotary switches allow quick Modbus node address setup (1–247) without software tools. - **Hot‑Swap and Auto‑Configuration:** Modules can be replaced without rewiring; configuration is stored in a removable EEPROM for seamless transfer. - **Programmable Power‑On and Safety Values:** Each output can be assigned startup and fail‑safe states to ensure system safety during power‑up or communication loss. - **Isolation Protection:** 3000 VDC isolation between power, communication, and I/O circuits for noise immunity and equipment protection. - **Wide Power Input Range:** Operates from +10 VDC to +60 VDC (ripple ≤ 5 V p‑p), compatible with 12 V, 24 V, 36 V, 48 V industrial supplies. - **Compact Form Factor:** Slim 47.2 mm vertical housing for space‑constrained control panels. - **LED Diagnostics:** Three front‑panel LEDs indicate power, communication, and system status for quick on‑site troubleshooting. - **Rugged Industrial Design:** EMC‑tested for EMI/EMS compliance; integrated hardware and system watchdogs ensure reliable operation in harsh environments. - **Modular Expandability:** DIN‑rail or wall‑mount base with docking connectors allows cascading multiple modules without rewiring. - **5‑Year Warranty:** Long‑term reliability backed by Advanio’s extended industrial warranty.

Manufacturer: Advanio

Category: Ethernet / USB / RS485 / RS232 Modbus IO

- **Eight Relay Outputs:** 4 Form A (SPST‑NO) + 4 Form C (SPDT) contacts for versatile load control. - **High Load Capacity:** Each relay rated 5 A @ 250 VAC or 30 VDC. - **RS‑485 Modbus/RTU Interface:** Standard industrial serial bus supporting multi‑drop networks up to 1.2 km. - **Wide Power Input Range:** +10 to +60 V DC with reverse‑polarity protection; ripple ≤ 5 V p‑p. - **Isolation Protection:** 3 kV DC isolation between power, communication, and I/O circuits. - **Programmable Power‑On and Safety Values:** User‑defined startup and fail‑safe output states. - **Hot‑Swap and Auto‑Configuration:** Detachable EEPROM retains parameters for rapid module replacement. - **Rotary Switch Address Setting:** Two hexadecimal switches for quick Modbus node assignment (1–247). - **LED Diagnostics:** Three status LEDs (Power, System, Communication) for instant visual feedback. - **Compact Slim Design:** 47.2 mm width DIN‑rail mountable housing for space‑constrained control panels. - **Industrial Reliability:** Operating temperature −25 to +70 °C; humidity 5–95 % RH non‑condensing. - **Watchdog Protection:** Hardware (module) and software (system) watchdogs ensure safe recovery from faults. - **EMC Compliance:** Designed and tested for EMI/EMS immunity in industrial environments. - **Long Service Life:** Electrical endurance ≥ 100 000 operations at 3 A load. - **Warranty:** 5 years manufacturer warranty covering defects under normal use.

Manufacturer: Advanio

Category: Ethernet / USB / RS485 / RS232 Modbus IO

- **High‑Density Relay Output:** 16 relay channels divided into 8 Form A (SPST‑NO) and 8 Form C (SPDT) contacts, providing flexible switching for AC and DC loads. - **Electrical Ratings:** Each relay supports up to **5 A @ 250 VAC / 30 VDC**, suitable for direct control of solenoids, contactors, lamps, and small motors. - **Communication Interface:** RS‑485 serial interface supporting **Modbus RTU** protocol for seamless integration with PLCs, PACs, HMIs, and SCADA systems. - **Configurable Logic:** Digital output channels can be configured as **normal or inverted logic**, allowing compatibility with existing control logic or replacement of legacy modules. - **Hot‑Swap and Auto‑Configuration:** Modules can be replaced without rewiring. Configuration data is stored in a removable **EEPROM**, enabling quick restoration of parameters to a replacement unit. - **Programmable Power‑On and Safety States:** Each output channel can be assigned a defined **power‑on value** and a **safe value** (activated when watchdog timeout or communication failure occurs). - **Isolation Protection:** 3 kV DC isolation between power, communication, and I/O circuits ensures noise immunity and protection against transient surges. - **Wide Power Supply Range:** Operates from **+10 V DC to +60 V DC** (ripple ≤ 5 V p‑p), compatible with 12 V, 24 V, 36 V, 48 V industrial supplies. - **Compact, Space‑Saving Design:** Slim 47.2 mm vertical housing allows dense installation on DIN rails, maximizing cabinet utilization. - **Diagnostic LEDs:** Three front‑panel LEDs indicate power, communication, and system status for quick on‑site troubleshooting. - **Industrial‑Grade Reliability:** Built‑in **module watchdog** and **system watchdog** automatically recover from transient faults or host communication loss. - **Ease of Configuration:** Modbus node address set via **two rotary switches** (1–247). Baud rate and parity configurable via software or Modbus registers. - **Environmental Robustness:** Operating temperature range **–25 °C to +70 °C**, humidity 5–95 % RH (non‑condensing). - **Long‑Term Warranty:** Backed by a **5‑year manufacturer warranty** covering defects under normal industrial operation.

Manufacturer: Advanio

Category: Ethernet / USB / RS485 / RS232 Modbus IO

- **Integrated Digital I/O:** 16 isolated digital input channels (dry/wet contact selectable) and 16 isolated NPN‑type digital output channels. - **RS‑485 Modbus/RTU Communication:** Standard Modbus RTU protocol with baud rates from 1.2 kbps to 115.2 kbps; supports up to 1.2 km communication distance. - **Flexible Input Configuration:** Each input channel can be configured for dry or wet contact operation, with programmable logic polarity (normal/inverted). - **Advanced Diagnostics:** Three front‑panel LEDs indicate power, communication, and system status for quick on‑site troubleshooting. - **Hot‑Swap and Auto‑Configuration:** Modules can be replaced without rewiring; configuration parameters are stored in a removable EEPROM for rapid recovery. - **Programmable Power‑On and Safety States:** User‑defined startup and fail‑safe output values prevent unintended actuator operation during power‑up or communication loss. - **High Isolation and Protection:** 2.5 kV DC isolation between I/O, power, and communication circuits; ±70 V input over‑voltage protection. - **Wide Power Supply Range:** Operates from +10 V DC to +60 V DC (ripple ≤ 5 V p‑p), supporting 12 V, 24 V, 36 V, and 48 V industrial supplies. - **Compact, Space‑Saving Design:** 47.2 mm slim vertical housing allows 1.5× higher module density than conventional flat‑mount I/O devices. - **Industrial‑Grade Reliability:** Built‑in hardware and software watchdogs ensure automatic recovery from communication or system faults. - **User‑Friendly Configuration:** Modbus node address set via dual rotary switches (1–247); no PC required for basic setup. - **Long‑Term Warranty:** 5‑year manufacturer warranty covering defects under normal industrial operation.

Manufacturer: Advanio

Category: Ethernet / USB / RS485 / RS232 Modbus IO

- **Mixed I/O Configuration:** 16 isolated digital input channels and 8 relay output channels (4 Form A + 4 Form C). - **Relay Output Ratings:** 5 A @ 250 VAC / 30 VDC per channel, dielectric strength 3 kV. - **Digital Input Characteristics:** Supports both dry and wet contact modes; configurable logic polarity (normal/inverted). - **Communication Interface:** RS‑485 serial bus with Modbus RTU protocol, supporting baud rates from 1200 bps to 115.2 kbps. - **Isolation & Protection:** 3000 VDC isolation between power, communication, and I/O; ±70 V input over‑voltage protection. - **Hot‑Swap & Auto‑Configuration:** Modules can be replaced without rewiring; configuration stored in detachable EEPROM for quick restoration. - **Programmable Power‑On & Safety Values:** User‑defined startup and safe‑state output values prevent unintended actuation during power cycling or communication loss. - **Wide Power Input Range:** +10 VDC to +60 VDC (ripple ≤ 5 V p‑p). - **Compact Form Factor:** 47.2 mm slim vertical housing for space‑constrained control panels. - **Diagnostics & Maintenance:** Three front‑panel LEDs indicate power, communication, and system status; Modbus node address set via dual rotary switches. - **Environmental Robustness:** Operating temperature –25 °C to +70 °C; humidity 5 – 95 % RH; EMC‑tested for EMI/EMS immunity. - **Reliability Enhancements:** Hardware module watchdog (1.6 s fixed) and programmable system watchdog ensure automatic recovery from faults. - **Warranty:** 5‑year limited manufacturer warranty.

Manufacturer: Advanio

Category: Ethernet / USB / RS485 / RS232 Modbus IO

- **Dual Analog Output Channels:** Two fully isolated, independently configurable analog output channels supporting voltage and current modes. - **Multiple Output Ranges:** ±5 V, ±10 V, 0–5 V, 0–10 V, 0–20 mA, and 4–20 mA selectable per channel. - **Programmable Output Slope:** Adjustable output slew rate from 0.0625 V/s – 512 V/s or 0.125 mA/s – 1024 mA/s for smooth signal transitions. - **High Isolation Protection:** 3000 V DC isolation between power, communication, and I/O circuits ensures robust noise immunity and protection against industrial interference. - **Wide Power Supply Range:** Operates from +10 V DC to +60 V DC (ripple ≤ 5 V p‑p), compatible with 12 V, 24 V, 36 V, 48 V industrial supplies. - **Compact Form Factor:** Slim 47.2 mm housing for high‑density DIN‑rail or wall‑mount installations. - **RS‑485 Modbus/RTU Communication:** Standard Modbus RTU protocol with baud rates from 1200 bps to 115.2 kbps and communication distance up to 1.2 km. - **Hot‑Swap and Auto‑Configuration:** Detachable EEPROM retains configuration; modules can be replaced without re‑wiring or re‑programming. - **Watchdog Protection:** Hardware and software watchdogs automatically reset the module or outputs to safe state on communication failure. - **LED Diagnostics:** Three front‑panel LEDs indicate power, system, and communication status for quick on‑site troubleshooting. - **Programmable Power‑On and Safety Values:** User‑defined startup and fail‑safe output states prevent unintended actuator operation. - **Industrial‑Grade Reliability:** Designed for continuous operation in harsh environments (‑25 °C – +70 °C, 5 – 95 % RH). - **Long‑Term Warranty:** 5‑year manufacturer warranty covering defects under normal industrial use.

Manufacturer: Advanio

Category: Ethernet / USB / RS485 / RS232 Modbus IO

- **8 Isolated Digital Inputs:** Each channel supports both dry‑contact and wet‑contact modes, selectable per application. - **Dry/Wet Configurable Logic:** - *Dry contact:* Logic 0 = open, Logic 1 = closed to GND. - *Wet contact:* Logic 0 = ≤ 3 V, Logic 1 = 10 – 50 V DC. - **Input Isolation:** 2.5 kV DC isolation between channels and logic circuitry for noise immunity and safety. - **DI Latch Function:** Captures transient input pulses ≥ 5 ms to ensure reliable detection of short‑duration events. - **DI Counter Function:** 16‑bit hardware counter per channel, up to 100 Hz max frequency. - **Normal/Inverted Logic Selection:** Each input can be configured as normal or inverted to simplify system integration or replacement of legacy modules. - **Hot‑Swap and Auto‑Configuration:** Modules can be replaced without rewiring; configuration parameters are stored in a removable EEPROM for quick transfer. - **Rotary Switch Addressing:** Two hexadecimal rotary switches allow fast Modbus node address setup (1 – 247). - **Wide Power Supply Range:** Operates from +10 V DC to +60 V DC (ripple ≤ 5 V p‑p). - **Compact Form Factor:** 20 mm slim housing, 100 × 95 mm footprint, optimized for DIN‑rail or wall mounting. - **LED Diagnostics:** Three front LEDs indicate power, communication, and system status for rapid on‑site troubleshooting. - **Programmable Power‑On and Safety States:** Ensures controlled startup and fail‑safe behavior under watchdog timeout or communication loss. - **Industrial‑Grade Reliability:** Built‑in hardware and software watchdogs, EMC‑tested design, and operation from –25 °C to +70 °C. - **Modbus/RTU Protocol:** Fully compatible with standard Modbus masters (PLC, PAC, SCADA, HMI, PC). - **Cost‑Effective, Space‑Saving Design:** High channel density and vertical orientation allow 1.5× more modules per panel compared with conventional flat I/O devices.

Manufacturer: Advanio

Category: Ethernet / USB / RS485 / RS232 Modbus IO

- **8 Isolated NPN Digital Output Channels:** Each channel supports sink‑type NPN transistor output for controlling external loads. - **RS‑485 Modbus/RTU Communication:** Fully compatible with standard Modbus/RTU protocol, supporting baud rates from 1200 bps to 115.2 kbps. - **Easy Node Address Configuration:** Two rotary switches allow quick Modbus node address setup (1–247) without software tools. - **Hot‑Swap and Auto‑Configuration:** Modules can be replaced without rewiring; configuration parameters are stored in a removable EEPROM for seamless transfer. - **Programmable Power‑On and Safety Values:** Ensures controlled startup and safe fallback states during communication loss or watchdog timeout. - **High Isolation Protection:** 2.5 kV DC isolation between power, communication, and I/O circuits prevents damage from industrial noise. - **Wide Power Supply Range:** Operates from +10 V DC to +60 V DC (ripple ≤ 5 V p‑p). - **Compact Form Factor:** 100 mm × 95 mm × 20 mm slim housing for space‑constrained installations. - **LED Diagnostics:** Three front‑panel LEDs indicate power, system, and communication status for quick on‑site troubleshooting. - **Industrial‑Grade Reliability:** Designed for continuous operation in harsh environments (–25 °C to +70 °C). - **Low Power Consumption:** Approximately 0.5 W @ 24 V DC. - **5‑Year Warranty:** Long‑term reliability backed by Advanio’s extended warranty program.

Manufacturer: Advanio

Category: Ethernet / USB / RS485 / RS232 Modbus IO

- **4 Isolated Digital Inputs (Dry/Wet selectable):** Supports both dry contact (mechanical switch) and wet contact (voltage signal) modes. - **4 Isolated NPN Digital Outputs:** Open‑collector transistor outputs for direct control of external devices. - **RS‑485 Communication Interface:** Standard Modbus RTU protocol for seamless integration with PLCs, PACs, and SCADA systems. - **Hot‑Swap and Auto‑Configuration:** Modules can be replaced without rewiring; configuration automatically restored via EEPROM. - **EEPROM Parameter Backup:** Non‑volatile memory stores configuration and calibration data for easy module replacement. - **Programmable Power‑On and Safety Values:** Ensures safe startup and fail‑safe operation during communication loss. - **Isolation Protection:** 2.5 kV isolation between I/O, power, and communication circuits. - **Wide Power Input Range:** Operates from +10 VDC to +60 VDC (ripple ≤ 5 V p‑p). - **Compact Design:** 100 × 95 mm footprint, 20 mm slim width for space‑constrained installations. - **LED Diagnostics:** Three front‑panel LEDs indicate power, communication, and system status for quick troubleshooting. - **Industrial‑Grade Reliability:** Operating temperature −25 °C to +70 °C; humidity 5–95 % RH. - **Low Power Consumption:** 1.6 W @ 24 VDC typical. - **Modbus Node Address via Rotary Switches:** Hardware address setting without software tools. - **Watchdog Timers:** Hardware and software watchdogs ensure automatic recovery from communication or system faults. - **DIN‑Rail or Wall Mounting:** Flexible installation options with detachable base and pin‑array connectors. - **5‑Year Warranty:** Long‑term reliability assurance for industrial deployments.

Manufacturer: Advanio

Category: Ethernet / USB / RS485 / RS232 Modbus IO

- **8 Isolated Digital Inputs:** Configurable as dry (contact closure) or wet (voltage signal) inputs. - **Dry/Wet Selectable Mode:** Supports both potential‑free contacts and voltage inputs (+10 to +50 V DC). - **DI Latch Function:** Captures short‑duration signals ≥ 5 ms for reliable event detection. - **DI Counter Function:** 16‑bit counter per channel, up to 100 Hz input frequency. - **Normal/Inverted Logic:** Each channel can be set to normal or inverted logic for compatibility with existing systems. - **Hot‑Swap and Auto‑Configuration:** Modules can be replaced without rewiring; EEPROM stores configuration for instant recovery. - **Non‑Volatile EEPROM Backup:** Configuration parameters are retained and transferable between modules. - **Programmable Power‑On and Safety Values:** Ensures safe system state on startup or communication failure. - **Isolation Protection:** 2.5 kV galvanic isolation between I/O, power, and communication circuits. - **Wide Power Input Range:** +10 to +60 V DC with ripple ≤ 5 V p‑p; PoE support for simplified wiring. - **Compact Form Factor:** 100 × 95 mm footprint, 20 mm slim width for dense DIN‑rail installation. - **LED Diagnostics:** Three status LEDs indicate power, communication, and system status for on‑site diagnosis. - **Easy Node Address Setting:** Two rotary switches allow quick Modbus address assignment (1–247). - **High Reliability:** Integrated module and system watchdogs for automatic recovery from faults. - **Industrial Grade Design:** Operating temperature −25 to +70 °C; humidity 5–95 % RH; EMC tested for EMI/EMS immunity. - **Low Power Consumption:** 1.6 W @ 24 V DC typical. - **Long Warranty:** 5‑year manufacturer warranty for industrial applications.

Manufacturer: Advanio

Category: Ethernet / USB / RS485 / RS232 Modbus IO

- **Eight Isolated Digital Outputs:** NPN (sinking) transistor outputs, individually isolated for reliable switching of external loads. - **Modbus TCP Communication:** Fully compliant with Modbus TCP protocol for seamless integration with PLCs, PACs, SCADA, and industrial PCs. - **Power‑over‑Ethernet (PoE):** Supports IEEE 802.3af/at PoE, allowing both power and data over a single Ethernet cable, simplifying wiring. - **Hot‑Swap and Auto‑Configuration:** Modules can be replaced without rewiring; configuration automatically restored via removable EEPROM. - **Rotary Switch Address Setting:** Two hexadecimal rotary switches enable quick node address configuration without software tools. - **Programmable Power‑On and Safety Values:** User‑defined startup and fail‑safe output states prevent unintended actuator operation. - **High Isolation Protection:** 2.5 kV DC isolation between I/O, power, and communication circuits ensures noise immunity and safety. - **Wide Power Input Range:** +10 to +60 V DC (ripple ≤ 5 V p‑p) for flexible industrial power compatibility. - **Compact Design:** 100 × 95 mm footprint, only 20 mm thick; ideal for dense control panels and DIN‑rail installations. - **LED Diagnostics:** Three front‑panel LEDs provide power, system, and communication status for rapid on‑site troubleshooting. - **EEPROM Backup:** Non‑volatile memory stores configuration parameters; easily transferable between modules. - **Watchdog Protection:** Hardware and software watchdogs automatically reset the module or force safe outputs on communication loss. - **Industrial Reliability:** Designed for harsh environments with operating temperature −25 to +70 °C and humidity 5 – 95 % RH. - **Cost‑Effective and Space‑Saving:** High channel density in a slim housing reduces cabinet space and wiring complexity.

Manufacturer: Advanio

Category: Ethernet / USB / RS485 / RS232 Modbus IO

- **4 × Isolated Digital Inputs (Dry/Wet Contact):** Configurable for dry or wet contact operation, supporting up to ±70 V input tolerance. - **4 × Isolated NPN Digital Outputs:** Open‑collector outputs with programmable power‑on and safety states. - **PoE (Power over Ethernet):** Simplifies wiring by combining power and communication through a single Ethernet cable. - **Modbus TCP Protocol:** Standard industrial Ethernet communication for easy integration with PLCs, SCADA, and HMI systems. - **Hot‑Swap and Auto‑Configuration:** Modules can be replaced without rewiring; configuration parameters are stored in a removable EEPROM. - **Rotary Switch Node Addressing:** Two rotary switches allow quick Modbus node setup without software tools. - **Non‑Volatile EEPROM Backup:** Configuration and calibration data retained during power loss or module replacement. - **Programmable Power‑On and Safety Values:** Ensures controlled startup and safe fallback during communication loss. - **High Isolation Protection:** 2.5 kV isolation between I/O, power, and communication circuits. - **Wide Power Input Range:** +10 V DC to +60 V DC (ripple ≤ 5 V p‑p). - **Compact Industrial Design:** 100 × 95 mm footprint, 20 mm width; DIN‑rail or wall‑mountable. - **Low Power Consumption:** 1.6 W @ 24 V DC. - **Extended Operating Temperature:** −25 °C to +70 °C. - **LED Diagnostics:** Three front LEDs indicate power, system, and communication status for quick on‑site troubleshooting. - **Rugged Industrial Reliability:** Built‑in hardware and system watchdogs for self‑recovery from communication or system faults. - **5‑Year Warranty:** Long‑term reliability assurance for industrial environments.

Manufacturer: Advanio

Category: Ethernet / USB / RS485 / RS232 Modbus IO

- **Dual Analog Inputs (2 × AD):** Supports voltage or current signal acquisition with ±70 V input protection. - **Four Isolated Digital Outputs (4 × DO NPN):** NPN open‑collector outputs with programmable power‑on and safety states. - **Power‑over‑Ethernet (PoE):** Enables single‑cable power and data transmission, simplifying installation and reducing wiring cost. - **Modbus TCP Protocol:** Fully compatible with standard Modbus TCP/IP for seamless integration with PLCs, SCADA, and industrial PCs. - **Rotary Switch Addressing:** Two rotary switches allow quick and tool‑free node address configuration (1–247). - **Hot‑Swap and Auto‑Configuration:** Modules can be replaced without system shutdown; configuration parameters are stored in a removable EEPROM for instant restoration. - **EEPROM Backup:** Non‑volatile memory retains configuration and calibration data; transferable between modules. - **Programmable Power‑On and Safety Values:** Ensures controlled startup and safe fallback states during communication loss. - **High Isolation Protection:** 2.5 kV isolation between I/O, power, and communication circuits for robust noise immunity. - **Wide Power Input Range:** Operates from +10 VDC to +60 VDC; ripple peak ≤ 5 V. - **Compact Form Factor:** 100 mm × 95 mm × 20 mm slim housing for space‑constrained control panels. - **LED Diagnostics:** Three front‑panel LEDs provide power, system, and communication status for quick on‑site troubleshooting. - **Industrial‑Grade Reliability:** Designed for harsh environments with watchdog timers, over‑voltage protection, and extended temperature operation. - **Operating Temperature:** −25 °C to +70 °C. - **Low Power Consumption:** 1.6 W @ 24 VDC. - **5‑Year Warranty:** Long‑term reliability assurance from Advanio.

Manufacturer: Advanio

Category: Ethernet / USB / RS485 / RS232 Modbus IO