• 4‑port 100FX multimode fiber interface module for RGS‑9000 series. • LC fiber connectors for each 100FX port. • Supports multimode fiber transmission up to 2 km. • Compliant with IEC 61850‑3 and IEEE 1613 for power substation/utility environments. • Designed for harsh industrial temperature ranges (−40°C to +70°C). • Fully compatible with ORing’s O‑Ring redundancy technology (recovery < 30 ms). • Hot‑swappable module design (installation with switch powered off). • Supported in modular slots 1–3 on the RGS‑9000 series chassis. • Works with Layer‑2/Layer‑3 managed features provided by the base chassis (VLANs, QoS, IGMP, ACLs, routing, etc.). • Fiber SFP uplink compatibility via the main switch (if combined with SFP modules). • Increased EMI immunity and rugged design suitable for substations and transportation networks.

Manufacturer: Oring

Category: Smart Grid IEC-61850

- **Four 100Base‑FX Multimode Fiber Ports:** Each port uses an ST connector and supports up to 2 km transmission distance over 50/125 µm or 62.5/125 µm multimode fiber. - **Industrial‑Grade Design:** Compliant with IEC 61850‑3 and IEEE 1613 for substation and rolling‑stock environments; resistant to EMI, vibration, and temperature extremes. - **Modular Integration:** Hot‑swappable module compatible with RGS‑9000 Series chassis; allows flexible port configuration alongside RJ‑45, SFP, or 10 G SFP+ modules. - **Extended Temperature Operation:** ‑40 °C to +70 °C continuous operation for reliable performance in outdoor or cabinet installations. - **High Immunity and Reliability:** Designed for mission‑critical networks requiring deterministic performance and minimal downtime. - **Full Compatibility with ORing Redundancy Protocols:** Supports O‑Ring, O‑Chain, and MRP redundancy mechanisms through the host switch, achieving recovery times

Manufacturer: Oring

Category: Smart Grid IEC-61850

- **Four 100 Mbps Fiber Ports:** Each port supports 100BASE‑FX single‑mode operation with LC connectors. - **Long‑Distance Transmission:** Up to **30 km** reach over single‑mode fiber (1310 nm typical wavelength). - **Industrial‑Grade Design:** Compliant with **IEC 61850‑3** and **IEEE 1613** for electromagnetic immunity and environmental endurance. - **Extended Temperature Range:** Operates from **–40 °C to +70 °C**, suitable for outdoor and substation environments. - **Hot‑Swappable Module:** Can be inserted or replaced in RGS‑9000 chassis slots without powering down the system. - **Full Integration with RGS‑9000 Management:** Supports all Layer 2/3 managed switch functions including VLAN, QoS, redundancy, and SNMP monitoring. - **High Reliability:** Designed for mission‑critical networks with redundant ring topologies (O‑Ring, MRP, MSTP). - **Compact LC Interface:** Dual LC connectors per port for transmit (TX) and receive (RX) fiber pairs. - **Low Power Consumption:** Optimized for modular switch backplane power efficiency. - **Plug‑and‑Play Compatibility:** Automatically recognized by the RGS‑9000 switch firmware.

Manufacturer: Oring

Category: Smart Grid IEC-61850

- **Four 100 Mbps Fiber Ports:** Each port supports 100BASE‑FX single‑mode fiber connections via ST connectors. - **Long‑Distance Transmission:** Up to **30 km** reach per port using standard single‑mode fiber (1310 nm). - **Industrial‑Grade Design:** Compliant with **IEC 61850‑3** and **IEEE 1613** for power substation and railway environments. - **Extended Temperature Operation:** –40 °C to +70 °C continuous operation for outdoor or cabinet‑mounted systems. - **Hot‑Swappable Module:** Designed for easy insertion into RGS‑9000 modular slots without system downtime. - **Full Integration with RGS‑9000 Management:** Supports all Layer 2/3 managed switch functions, redundancy protocols, and diagnostics. - **Redundant Network Support:** Compatible with O‑Ring, O‑Chain, MRP, and MSTP redundancy mechanisms (

Manufacturer: Oring

Category: Smart Grid IEC-61850

- **4×1000FX Multi‑Mode Fiber Ports:** Each port supports 1000 Mbps full‑duplex operation over multi‑mode optical fiber. - **LC Connector Interface:** Standard LC duplex connectors for easy integration with existing fiber infrastructure. - **Transmission Distance:** Up to **550 m** over 50/125 µm or 62.5/125 µm multi‑mode fiber at **850 nm** wavelength. - **Hot‑Swappable SFP Design:** Enables flexible installation and replacement without powering down the switch. - **IEC 61850‑3 and IEEE 1613 Compliance:** Certified for electromagnetic and environmental performance in power substations and rolling stock systems. - **Extended Temperature Operation:** –40 °C to +70 °C for reliable performance in extreme conditions. - **Integration with RGS‑9000 Modular Platform:** Fully compatible with the RGS‑9000 chassis, which supports up to three SFP modules and one 10 G SFP+ module. - **Industrial‑Grade Reliability:** Designed for continuous operation in vibration, shock, and EMI‑intensive environments. - **O‑Ring and MRP Redundancy Support:** Enables sub‑30 ms recovery time across large ring networks when used within the RGS‑9000 switch. - **Energy‑Efficient Ethernet (IEEE 802.3az):** Reduces power consumption during low network activity.

Manufacturer: Oring

Category: Smart Grid IEC-61850

- **4-Port Gigabit Fiber Module:** Provides four 1000Base-FX multimode fiber interfaces using SC connectors. - **Multimode Fiber Support:** Optimized for multimode fiber transmission up to 30 km (depending on fiber type and SFP module). - **Industrial-Grade Design:** Fully compliant with **IEC 61850-3** and **IEEE 1613** standards for electromagnetic immunity and environmental resilience in substation automation systems. - **Extended Temperature Range:** Operates reliably from **-40°C to +70°C**, suitable for harsh industrial environments. - **High Reliability:** Designed for redundant network architectures using ORing’s proprietary **O-Ring** and **O-Chain** redundancy technologies with recovery times under 30 ms across 250 nodes. - **Modular Integration:** Compatible with the **RGS-9000 Series** chassis, which supports up to four modules (three 1G modules and one 10G SFP+ module). - **Hot-Swappable Module Design:** Enables easy installation and replacement without system downtime. - **Enhanced Network Security:** Supports HTTPS, SSH, SNMPv3, RADIUS, and 802.1x authentication. - **Comprehensive Management:** Web-based GUI, Telnet, CLI, and ORing’s **Open-Vision** centralized management software. - **Energy-Efficient Ethernet:** Supports IEEE 802.3az for reduced power consumption. - **High Availability:** Redundant power input modules and fault relay outputs ensure continuous operation.

Manufacturer: Oring

Category: Smart Grid IEC-61850

• Provides **4 × 1000FX** fiber ports for high‑performance Gigabit Ethernet connections • Uses **multimode (MM)** fiber with **ST connectors** supporting **550 m** link distance • Supports **SFP/SFP+ optical transceiver standards** for modularity and fast deployment • Fully compliant with **IEC 61850‑3** and **IEEE 1613**, enabling deployment in harsh electrical environments such as power substations • Designed for ORing’s **RGS‑9000 modular switch series** • Extended operating temperature: **–40°C to +70°C** • Suitable for high‑EMI, industrial, transportation, automation, and power utility applications • Seamless integration with ORing O‑Ring, O‑Chain, and MRP redundant network technologies • Hot‑swappable module architecture (installed with power off as recommended) • Supports redundant fiber network topologies and substation-grade electromagnetic immunity • Compatible with multimode fiber types: **50/125 µm** and **62.5/125 µm**, typically operating at **850 nm**

Manufacturer: Oring

Category: Smart Grid IEC-61850

• Provides 4 independent 1000Base‑FX multi‑mode fiber interfaces. • Uses ST fiber connectors for robust coupling and industrial durability. • Supports multi‑mode fiber transmission over extended distances (up to 30 km as specified). • Fully compliant with IEC 61850‑3 and IEEE 1613 for power utility and substation hardened networking. • Designed for industrial modular switches of the RGS‑9000 family (slot‑based installation). • Wide operating temperature support: −40°C to +70°C (extended temperature class). • Compatible with ORing industrial redundancy technologies including O‑Ring (

Manufacturer: Oring

Category: Smart Grid IEC-61850

- **High‑Performance Fiber Connectivity:** Four independent 1000Base‑FX single‑mode fiber ports with LC connectors, supporting up to 10 km transmission distance per port. - **Industrial‑Grade Design:** Compliant with IEC 61850‑3 and IEEE 1613 for electromagnetic immunity and environmental robustness in power automation and railway systems. - **Extended Temperature Range:** Operates reliably from –40 °C to +70 °C, suitable for outdoor cabinets, substations, and rolling stock environments. - **Modular Integration:** Designed for the RGS‑9000 modular chassis, allowing flexible configuration of up to three 8‑port Gigabit modules and one 10 G SFP+ module. - **High Availability and Redundancy:** Fully compatible with ORing’s O‑Ring, O‑Chain, and MRP redundancy technologies, providing recovery times below 30 ms across large ring networks. - **Network Management Support:** Integrates seamlessly with the RGS‑9000’s managed Layer 2/3 features, including VLAN, QoS, SNMP v3, RMON, Modbus TCP, and IEEE 1588v2 synchronization. - **Rugged Construction:** Industrial‑grade components, vibration‑resistant connectors, and EMI‑shielded housing ensure long‑term reliability.

Manufacturer: Oring

Category: Smart Grid IEC-61850

- **High-Performance Fiber Module:** Provides 4×1000Base-FX single-mode fiber ports with SC connectors, supporting up to 30 km transmission distance. - **Industrial-Grade Design:** Compliant with **IEC 61850-3** and **IEEE 1613**, ensuring electromagnetic immunity and reliability in power substations and rolling stock environments. - **Extended Temperature Range:** Operates reliably from **-40°C to +70°C**, suitable for outdoor and industrial installations. - **Modular Integration:** Designed for the **RGS-9000 Series** chassis, allowing flexible configuration of copper, fiber, and 10G SFP+ modules. - **High Availability Networking:** Supports ORing’s proprietary **O-Ring** redundancy protocol with recovery time

Manufacturer: Oring

Category: Smart Grid IEC-61850

- **Four 1000Base‑FX Fiber Interfaces:** Each port supports full‑duplex Gigabit Ethernet over single‑mode fiber. - **ST‑Type Connectors:** Rugged bayonet‑style connectors for secure industrial fiber connections. - **10 km Transmission Distance:** Optimized for long‑haul single‑mode fiber links at 1310 nm wavelength. - **SFP‑Based Design:** Uses standard SFP optical transceivers for flexibility and easy replacement. - **IEC 61850‑3 / IEEE 1613 Compliance:** Meets stringent EMC, surge, and temperature requirements for substation automation and rolling‑stock environments. - **Extended Temperature Range:** –40 °C to +70 °C continuous operation for harsh industrial conditions. - **Hot‑Swappable Module:** Can be inserted or replaced without powering down the RGS‑9000 chassis. - **Integration with ORing O‑Ring Redundancy:** Supports network recovery times

Manufacturer: Oring

Category: Smart Grid IEC-61850

- **Four 1000Base‑FX Single‑Mode Fiber Ports:** Each port supports up to 1 Gbps full‑duplex operation over single‑mode fiber with ST connectors. - **Long‑Distance Transmission:** Optical reach up to **30 km** per port using standard single‑mode fiber. - **Industrial‑Grade Design:** Compliant with **IEC 61850‑3** and **IEEE 1613** for electromagnetic immunity, surge protection, and temperature endurance. - **Extended Operating Temperature:** Rated for **–40 °C to +70 °C**, suitable for outdoor and substation environments. - **Hot‑Swappable Modular Architecture:** Designed for the **RGS‑9000 chassis**, allowing field replacement or expansion without system downtime. - **O‑Ring Redundancy Support:** Integrates with ORing’s proprietary **O‑Ring** and **O‑Chain** redundancy protocols, providing recovery times under **30 ms** across up to 250 nodes. - **SFP+ Compatibility:** Supports fiber SFP/SFP+ modules for flexible deployment. - **High Immunity and Reliability:** Meets **IEC 61000‑4‑2/3/4/5/6/8/11** EMC standards; resistant to ESD, surge, and EFT disturbances. - **Centralized Management:** Fully manageable through the RGS‑9000’s web interface, CLI, SNMP, and Open‑Vision utility. - **Energy‑Efficient Ethernet:** Supports **IEEE 802.3az** for reduced power consumption during low traffic periods.

Manufacturer: Oring

Category: Smart Grid IEC-61850

• 4×10G SFP+ fiber uplink module for RGS‑9000 switches • Compliant with IEC‑61850‑3 and IEEE 1613 for power substation immunity • Extended temperature range: −40°C to +70°C • Designed for slot 4 (dedicated 10G SFP+ slot) in RGS‑9000 chassis • Hot‑swappable module design (requires power‑off during installation) • Compatible with a wide range of industrial‑grade SFP+ transceivers • Supports long‑distance fiber backbones (MM/SM depending on SFP+) • Low‑latency (typical switching latency of 7 µs in base chassis) • Fully integrated into the RGS‑9000 managed feature set • Supports advanced Ethernet redundancy mechanisms (O‑Ring

Manufacturer: Oring

Category: Smart Grid IEC-61850

• **4 independent 10‑Gigabit SFP+ fiber interfaces** • Standards‑compliant optical interfaces supporting 10G SFP+ modules for long‑distance fiber connectivity • Full environmental compliance for power substation and railway applications • Operation within extended industrial temperature limits (−40°C to +70°C per product description; within switch limits −20°C to +60°C when installed) • Hot‑swappable modular design for ORing RGS‑9000 chassis (slot 4) • Integrates into switches supporting advanced L2/L3 functions including routing, redundancy, security, PTP, and QoS • Compliant with **IEC 61850‑3**, **IEEE 1613**, and EN/IEC electromagnetic immunity and surge standards • Works with ORing proprietary redundancy technologies (O‑Ring, O‑Chain, Open‑Ring) and IEEE redundancy protocols • Supports DDM (Digital Diagnostics Monitoring) when paired with SFP+ transceivers that include DDM capability • Designed for high‑availability networks in industrial power, utility, transportation, and mission‑critical infrastructure

Manufacturer: Oring

Category: Smart Grid IEC-61850

Module 4*10G Fiber SFP+ IEC-61850-3, extended -40°..70°C operating temperature, Oring

Manufacturer: Oring

Category: Smart Grid IEC-61850

Module 4*1G Fiber SFP IEC-61850-3, extended -40°..70°C operating temperature, Oring

Manufacturer: Oring

Category: Smart Grid IEC-61850

- **8× 100/1000Base‑X SFP Ports:** Supports multimode or single‑mode fiber transceivers for flexible network topology. - **IEC 61850‑3 / IEEE 1613 Compliance:** Designed for substation automation and railway communication systems requiring high EMI immunity and environmental endurance. - **Extended Temperature Range:** ‑40 °C to +70 °C continuous operation for outdoor or unconditioned control cabinets. - **Modular Integration:** Hot‑swappable module for RGS‑9000 chassis; up to three SFP modules can be installed per switch. - **O‑Ring and MRP Redundancy:** Supports ORing’s proprietary **O‑Ring** (

Manufacturer: Oring

Category: Smart Grid IEC-61850

Industrial 8-port Gigabit fiber module with 8x100/1000Base-X, SFP socket

Manufacturer: Oring

Category: Smart Grid IEC-61850

- **High‑Performance 10 Gigabit Fiber Module:** Provides four 10 Gbit/s SFP+ fiber interfaces via M12 connectors for high‑bandwidth backbone or uplink applications. - **Industrial‑Grade Design:** Fully compliant with **IEC 61850‑3** and **IEEE 1613** standards for electromagnetic immunity, surge protection, and environmental robustness in substation and rolling‑stock environments. - **Extended Operating Temperature:** Rated for **–40 °C to +70 °C**, ensuring reliable operation in harsh outdoor or cabinet installations. - **Modular Integration:** Designed for the **RGS‑9000 Series** chassis, which supports up to four modules (three 1 G modules and one 10 G module). The SWM‑40GT‑M12 occupies the dedicated 10 G slot (Slot 4). - **Redundant Networking:** Supports ORing’s proprietary **O‑Ring** redundancy (

Manufacturer: Oring

Category: Smart Grid IEC-61850

- Provides 8 Gigabit Ethernet ports per module - Includes 4x 10/100/1000Base-T(X) copper ports - Includes 4x 100/1000Base-X SFP fiber-optic slots for flexible long-distance or EMI-resistant network deployment - Designed for ORing RGS-PR9000-A modular switch chassis offering up to three 1G slot modules - Enables mixed copper/fiber configurations within a single module - Supports Gigabit Ethernet data rates for high-performance industrial communications - Designed for harsh industrial environments under IEC 61850-3 and IEEE 1613 standards (when installed in RGS-PR9000-A) - Supports store-and-forward switching as part of the main system - Integrates into Ethernet redundancy frameworks including O-Ring, O-Chain, MSTP, RSTP, STP (via host switch) - Offers high reliability and compatibility with industrial automation protocols through host switch features (e.g., Modbus TCP) - Supports hot-swap replacement only when system is powered off (non–hot-pluggable module design) - Lightweight and durable design optimized for modular rack switch installation

Manufacturer: Oring

Category: Smart Grid IEC-61850

- **High‑Speed Fiber Connectivity:** Six 10 Gigabit Ethernet fiber interfaces using rugged M12 connectors for vibration‑resistant industrial deployment. - **IEC 61850‑3 / IEEE 1613 Compliance:** Fully compliant with substation and railway communication standards for electromagnetic immunity and environmental endurance. - **Modular Integration:** Designed as a plug‑in module for the RGS‑9000 chassis, enabling flexible port configuration (up to 4 slots per chassis). - **Wide Temperature Range:** Extended operating range from **–40 °C to +70 °C**, suitable for harsh outdoor or substation environments. - **Redundant Networking:** Supports ORing’s proprietary **O‑Ring** redundancy (

Manufacturer: Oring

Category: Smart Grid IEC-61850

- **8× 10/100/1000Base‑T(X) RJ‑45 Ports:** Auto‑negotiation and auto‑MDI/MDI‑X supported. - **IEC 61850‑3 / IEEE 1613 Compliance:** Designed for power substation and rolling‑stock environments. - **Extended Temperature Range:** ‑40 °C to +70 °C operation for field‑hardened reliability. - **Modular Integration:** Hot‑swappable module for RGS‑9000 chassis (slots 1–3). - **O‑Ring Redundancy:**

Manufacturer: Oring

Category: Smart Grid IEC-61850

• Eight auto‑negotiating 10/100/1000Base‑T(X) RJ‑45 ports • Fully compatible with the ORing RGS‑PR9000‑A modular chassis • Designed for rugged industrial applications • Non‑hot‑swappable module (requires system power‑down before replacement) • Supports full‑duplex/half‑duplex modes through the host system • Integrates with system‑level advanced capabilities such as: – IEC 61850‑3 / IEEE 1613 compliance (when installed in the host RGS‑PR9000‑A) – O‑Ring and O‑Chain redundant ring technologies – MSTP/RSTP/STP – Advanced Layer 3 routing and QoS (host‑based) • Module monitored and managed through the RGS‑PR9000‑A via Web GUI, CLI, SNMP, and Open‑Vision software • Designed for high reliability in demanding temperature, vibration, and EMI environments • Compact and lightweight: 272 g

Manufacturer: Oring

Category: Smart Grid IEC-61850

- **Hazardous Location Certification:** Fully compliant with **CID2 (Class I Division 2)** and **ATEX Class 1 Zone 2** standards for use in explosive or hazardous industrial environments. - **Port Configuration:** - 6 × 10/100Base-T(X) RJ45 ports (Auto MDI/MDI-X) - 2 × 100Base-FX fiber ports (Multi-mode, SC connectors) - **Fiber Optics:** Multi-mode fiber operation with 1310 nm wavelength, supporting up to 2 km transmission distance. - **Triple Redundant Power Inputs:** - Two terminal block inputs (12–48 VDC) - One DC power jack input (12–45 VDC) - Automatic failover ensures uninterrupted operation during power source failure. - **Wide Temperature Range:** Operates reliably from **–40°C to +70°C**, suitable for extreme industrial conditions. - **Rugged Construction:** IP30-rated metal enclosure for mechanical protection and electromagnetic shielding. - **Mounting Flexibility:** Supports both **DIN-rail** and **wall-mount** installation. - **Surge and ESD Protection:** Built-in surge suppression and electrostatic discharge protection for enhanced reliability. - **LED Indicators:** Comprehensive LED panel for power, fault, and port link/activity status. - **Low Power Consumption:** Typical consumption of **8 Watts**. - **High Reliability:** Store-and-forward switching architecture with 8192 MAC address table. - **Maintenance-Free Operation:** Unmanaged design eliminates configuration complexity, ideal for plug-and-play deployment.

Manufacturer: Oring

Category: Oil & Gas (C1D2 Approved)

Oil&Gas Industrial Unmanaged Switch 2*100FX Single Mode SC-Connector and 6*100TX, C1D2 and ATEX Class 1 Zone 2, extended -40°..70°C operating temperature, Triple Power Input 12..48VDC, ~680gr, 52*106,1*144,3mm, Oring

Manufacturer: Oring

Category: Oil & Gas (C1D2 Approved)