- **16 Digital Output Channels:** Provides 16 open-collector transistor outputs for controlling external devices such as relays, lamps, or actuators. - **Open Collector (NPN) Outputs:** Each channel can sink up to 100 mA at voltages up to 30 VDC, suitable for driving low-power loads. - **RS-485 Communication Interface:** Two-wire half-duplex communication supporting up to 256 modules on a single network segment. - **Modbus RTU Protocol Support:** Fully compatible with Modbus RTU, enabling integration with PLCs, SCADA systems, and industrial controllers. - **LED Indicators:** Each output channel has a dedicated LED for real-time status monitoring. - **Extended Temperature Range:** Operates reliably from -25°C to +75°C, suitable for industrial and outdoor environments. - **Dual Watchdog System:** Incorporates both hardware (module) and software (host) watchdogs to ensure continuous operation and fail-safe behavior. - **Configurable Power-On and Safe Values:** Allows predefined output states during startup or communication failure. - **Manual or Software Configuration:** Supports configuration via ASCII commands or supplied ExpertDAQ configuration utility. - **Compact and Rugged Design:** Built for industrial environments with high electrical noise immunity and robust isolation. - **Power Supply Flexibility:** Operates from a wide DC input range of +10 to +30 VDC. - **High Isolation Voltage:** 3750 Vrms isolation between communication and I/O circuits for safety and noise immunity. - **Low Power Consumption:** Typical consumption of 1.2 W, ensuring energy efficiency in large installations.

Manufacturer: TOPSCCC

Category: Modules Digital IO

- **Dual Communication Protocols:** Supports both **Modbus‑TCP (Ethernet/Wi‑Fi)** and **Modbus‑RTU (RS‑232/422/485)** for seamless integration with PLCs, PACs, and SCADA systems. - **Wireless Connectivity:** Built‑in **Wi‑Fi IEEE 802.11 b/g/n** module with internal antenna and optional external **IPEX antenna** for extended range. - **High‑Density I/O:** 16 analog input channels and 16 current input channels in a compact housing. - **Wide Input Ranges:** - Voltage: ±0.1 V, ±0.5 V, ±1 V, ±5 V, ±10 V, or 0–0.1 V, 0–0.5 V, 0–1 V, 0–5 V, 0–10 V. - Current: ±20 mA, 0–20 mA, or 4–20 mA (switch‑selectable). - **High Accuracy and Resolution:** 16‑bit A/D conversion with ±0.1 % FSR accuracy. - **Isolation and Protection:** 3000 VDC isolation between power, communication, and I/O; over‑voltage protection up to ±240 V. - **Wide Power Input Range:** Operates from **+10 VDC to +60 VDC**, with reverse‑polarity protection. - **Industrial‑Grade Design:** Operating temperature from **–25 °C to +70 °C**, humidity 5–95 % RH. - **Low Power Consumption:** 1.6 W @ 24 VDC typical. - **Compact and Space‑Saving:** Vertical form factor (120.1 × 94.4 × 121.1 mm, ~360 g) allows dense installation on DIN rails. - **Hot‑Swap and Auto‑Configuration:** EEPROM‑based configuration backup enables quick module replacement without re‑wiring. - **Programmable Safety States:** User‑defined power‑on and fail‑safe output values to ensure system safety. - **Watchdog Protection:** Hardware and software watchdogs for automatic recovery from communication or system faults. - **5‑Year Warranty:** Long‑term reliability backed by Advanio’s extended warranty program.

Manufacturer: Advanio

Category: Ethernet / USB / RS485 / RS232 Modbus IO

- **Dual Communication Interfaces:** Supports both **Wi‑Fi IEEE 802.11 b/g/n** and **wired LAN** for flexible network integration. Built‑in antenna with optional external IPEX antenna for extended range and signal stability. - **Modbus Compatibility:** Fully compliant with **Modbus‑TCP** (Ethernet) and **Modbus‑RTU** (RS‑232/422/485) protocols, enabling seamless integration with PLCs, SCADA, and industrial controllers. - **High‑Resolution Analog Inputs:** Sixteen (16) analog input channels with configurable voltage ranges of ±1 V, ±5 V, ±10 V, or 0–1/5/10 V. 16‑bit resolution with ±0.1 % FSR accuracy. - **Industrial Isolation and Protection:** 3 kV DC isolation between power, communication, and I/O circuits. Over‑voltage protection up to ±240 V on analog inputs. - **Wide Power Supply Range:** Operates from **+10 V DC to +60 V DC**, with reverse‑polarity protection and low power consumption (1.6 W @ 24 V DC). - **Rugged Environmental Design:** Operating temperature range: **–25 °C to +70 °C**. Humidity tolerance: **5 % to 95 % RH** (non‑condensing). EMC‑tested for EMI/EMS immunity. - **Compact, Space‑Saving Form Factor:** Vertical mounting design (Wolf Series standard) allows 1.5× higher module density compared to flat‑type I/O devices. Dimensions: **120.1 mm × 94.4 mm × 121.1 mm**, weight approx. **360 g**. - **Ease of Installation and Maintenance:** DIN‑rail or wall‑mountable base with detachable terminal blocks. Hot‑swappable module design with EEPROM‑based configuration backup. Rotary switch for Modbus node address setup—no PC required. - **Advanced Reliability Features:** Dual watchdog system (hardware module watchdog and software system watchdog). Programmable power‑on and safety values to ensure fail‑safe operation. - **Long‑Term Reliability:** Designed for continuous operation in harsh industrial environments. Backed by **5‑year manufacturer warranty**.

Manufacturer: Advanio

Category: Ethernet / USB / RS485 / RS232 Modbus IO

ExpertDAQ Digital Input module communicate via RS485 and are available with Modbus RTU, Within one RS485-network up to 256 modules may be controlled, Without a RS485 Repeater the maximum cable length is 1200m, The RS485 Digital IO module are sturdy, power saving and easy to use, the EX9053 has 16 channels with a low input impedance and was developed for use in a wide temperature range, features: 16 digital inputs, all inputs isolated, extended temperature range, low input impendance, Digital Level 0:

Manufacturer: TOPSCCC

Category: Module AD DIO

- **Dual 16‑Channel Configuration:** 16 isolated digital inputs (DI) and 16 isolated digital outputs (DO) in one compact housing. - **Flexible Input Modes:** Supports **dry or wet contact** digital inputs with configurable logic polarity (normal/inverted). - **High‑Speed Digital Input:** Built‑in **DI latch** for short pulse capture (≥ 5 ms) and **counter function up to 100 Hz** per channel. - **Isolated Outputs:** 16 NPN‑type digital outputs rated for 3.5 – 30 V DC, 500 mA per channel, with programmable **power‑on** and **safe‑state** values. - **Robust Electrical Isolation:** Channel‑to‑channel and system isolation up to **2.5 kV DC**, protecting logic circuits from industrial noise and surges. - **Wide Power Input Range:** Operates from **+10 V DC to +60 V DC**, with reverse‑polarity protection and ripple tolerance ≤ 5 V p‑p. - **Multi‑Protocol Communication:** Supports **Modbus‑TCP**, **Modbus‑RTU**, and **LAN/Wi‑Fi** interfaces for flexible integration with PLCs, PACs, and SCADA systems. - **High‑Speed Serial Communication:** Baud rate configurable from **1200 bps to 115.2 kbps**. - **LED Status Indicators:** Front‑panel LEDs for **System**, **Configuration**, and **WLAN** status simplify diagnostics. - **Compact, Space‑Saving Design:** Vertical form factor (120.1 × 94.4 × 121.1 mm, ≈ 360 g) allows dense DIN‑rail mounting. - **Industrial‑Grade Reliability:** Operating temperature –25 °C to +70 °C, humidity 5 – 95 % RH, EMC‑tested for EMI/EMS immunity. - **Hot‑Swap and Auto‑Configuration:** Detachable EEPROM retains configuration; modules can be replaced without re‑wiring. - **Long‑Term Warranty:** Backed by **5‑year manufacturer warranty**.

Manufacturer: Advanio

Category: Ethernet / USB / RS485 / RS232 Modbus IO

- **Mixed I/O Configuration:** 16 isolated digital input channels and 8 relay output channels (4 Form A + 4 Form C). - **Relay Output Ratings:** 5 A @ 250 VAC / 30 VDC per channel, dielectric strength 3 kV. - **Digital Input Characteristics:** Supports both dry and wet contact modes; configurable logic polarity (normal/inverted). - **Communication Interface:** RS‑485 serial bus with Modbus RTU protocol, supporting baud rates from 1200 bps to 115.2 kbps. - **Isolation & Protection:** 3000 VDC isolation between power, communication, and I/O; ±70 V input over‑voltage protection. - **Hot‑Swap & Auto‑Configuration:** Modules can be replaced without rewiring; configuration stored in detachable EEPROM for quick restoration. - **Programmable Power‑On & Safety Values:** User‑defined startup and safe‑state output values prevent unintended actuation during power cycling or communication loss. - **Wide Power Input Range:** +10 VDC to +60 VDC (ripple ≤ 5 V p‑p). - **Compact Form Factor:** 47.2 mm slim vertical housing for space‑constrained control panels. - **Diagnostics & Maintenance:** Three front‑panel LEDs indicate power, communication, and system status; Modbus node address set via dual rotary switches. - **Environmental Robustness:** Operating temperature –25 °C to +70 °C; humidity 5 – 95 % RH; EMC‑tested for EMI/EMS immunity. - **Reliability Enhancements:** Hardware module watchdog (1.6 s fixed) and programmable system watchdog ensure automatic recovery from faults. - **Warranty:** 5‑year limited manufacturer warranty.

Manufacturer: Advanio

Category: Ethernet / USB / RS485 / RS232 Modbus IO

- **Integrated Communication Interfaces:** Dual‑mode connectivity supporting both **Wi‑Fi** and **Ethernet LAN** for Modbus‑TCP and Modbus‑RTU protocols, allowing seamless integration into existing wired or wireless SCADA and PLC networks. - **High‑Density I/O Configuration:** Provides **16 isolated digital inputs (DI)** and **8 relay outputs (DO)** within a compact housing. The relay section includes **4 Form A** and **4 Form C** contacts for versatile load control. - **Advanced Digital Input Functions:** - **DI Latch Function:** Captures transient signals ≥ 5 ms to ensure reliable detection of short‑duration events. - **DI Counter:** Hardware‑based counting up to **100 Hz** per channel. - **Normal/Inverted Logic:** Configurable input polarity for compatibility with existing wiring schemes. - **Robust Electrical Isolation:** Channel‑to‑channel and system isolation up to **2.5 kV DC**, protecting internal logic from industrial noise and voltage surges. - **Wide Power Supply Range:** Operates from **+10 V DC to +60 V DC**, accommodating 12 V, 24 V, 36 V, and 48 V industrial power systems. Ripple peak must not exceed 5 V. - **Industrial‑Grade Design:** - Operating temperature: **–25 °C to +70 °C** - Humidity: **5 – 95 % RH** - Power consumption: **≈ 200 mA @ 24 V DC** - EMC‑tested for EMI/EMS immunity. - **User‑Friendly Diagnostics:** Front‑panel **LED indicators** for System, Configuration, and WLAN status simplify commissioning and troubleshooting. - **Compact, Space‑Saving Form Factor:** Vertical “upright” design (120.1 × 94.4 × 121.1 mm, ≈ 360 g) allows dense DIN‑rail installation—up to 1.5 × more modules per panel compared with flat‑mount devices. - **Reliability Enhancements:** - **Module and System Watchdogs** automatically reset the device or outputs to safe states on communication failure. - **EEPROM Backup** retains configuration for hot‑swap replacement. - **Programmable Power‑On and Safety Values** prevent unintended actuator operation after power cycling or network loss. - **Long‑Term Assurance:** Backed by **5‑year manufacturer warranty** and designed for continuous 24/7 industrial operation.

Manufacturer: Advanio

Category: Ethernet / USB / RS485 / RS232 Modbus IO

- **High‑Density Analog Input:** 16 differential analog input channels supporting voltage and current measurement ranges with ±240 V common‑mode protection. - **Universal Input Configuration:** Each channel independently configurable for ±100 mV, ±500 mV, ±1 V, ±5 V, ±10 V, 0–100 mV, 0–500 mV, 0–1 V, 0–5 V, 0–10 V, ±20 mA, 0–20 mA, or 4–20 mA via DIP switch. - **High Accuracy and Resolution:** 16‑bit A/D conversion with ±0.1 % FSR accuracy and 2.5 samples/s per channel sampling rate. - **Robust Electrical Protection:** Channel‑to‑channel isolation and over‑voltage protection up to ±240 V; common‑mode voltage tolerance up to 240 V; 3 kV isolation between I/O, power, and communication. - **Wide Power Input Range:** Operates from +10 V DC to +60 V DC (ripple ≤ 5 V p‑p), consuming approximately 2.8 W @ 24 V DC. - **Hot‑Swap and Auto‑Configuration:** Modules can be replaced without rewiring; configuration stored in removable EEPROM for quick transfer between units. - **Programmable Power‑On and Safety Values:** Ensures safe startup and fail‑safe operation during communication loss or watchdog timeout. - **Simple Node Addressing:** Two rotary switches allow Modbus node address setup (1–247) without software tools. - **Diagnostic LEDs:** Three front‑panel LEDs indicate power, communication, and system status for quick on‑site troubleshooting. - **Compact, Space‑Saving Design:** 47.2 mm slim vertical housing allows 1.5× higher module density compared to conventional flat I/O modules. - **Industrial‑Grade Reliability:** Designed for harsh environments with operating temperature –25 °C to +70 °C, humidity 5–95 % RH, and built‑in hardware/software watchdogs. - **Communication Interface:** RS‑485 serial interface supporting Modbus/RTU protocol, baud rates from 1200 bps to 115.2 kbps, and communication distance up to 1.2 km.

Manufacturer: Advanio

Category: Ethernet / USB / RS485 / RS232 Modbus IO

- **Universal Analog Input Capability:** Sixteen independent differential analog input channels supporting voltage, current, and thermocouple signals. - **Wide Input Range:** Configurable per channel for ±100 mV, ±500 mV, ±1 V, ±5 V, ±10 V, or 0–100 mV, 0–500 mV, 0–1 V, 0–5 V, 0–10 V; current ranges ±20 mA, 0–20 mA, 4–20 mA. - **Thermocouple Compatibility:** Direct connection for J, K, T, E, R, S, B, N types with built‑in cold‑junction compensation (CJC) and disconnection detection. - **High Accuracy and Resolution:** 16‑bit A/D conversion with ±0.1 % FSR accuracy and 2.5 samples per second per channel. - **High Voltage and Common‑Mode Protection:** ±240 V input protection and 240 V common‑mode isolation between channels. - **Robust Isolation:** 3 kV DC isolation between power, communication, and I/O circuits. - **Hot‑Swap and Auto‑Configuration:** Modules can be replaced without rewiring; configuration stored in removable EEPROM for quick restoration. - **Programmable Power‑On and Safety Values:** Ensures safe system states during startup or communication failure. - **Wide Power Supply Range:** Operates from +10 V DC to +60 V DC (ripple ≤ 5 V p‑p). - **RS‑485 Modbus/RTU Communication:** Baud rates selectable from 1200 bps to 115.2 kbps; node address set via dual rotary switches (1–247). - **Compact, Space‑Saving Design:** 47.2 mm slim vertical housing for dense DIN‑rail installations. - **Industrial‑Grade Reliability:** Built‑in hardware and system watchdogs, 3‑LED diagnostic indicators, and rugged EMC‑certified design.

Manufacturer: Advanio

Category: Ethernet / USB / RS485 / RS232 Modbus IO

- **Universal Analog Input Capability:** Supports voltage, current, and thermocouple inputs on each of 16 channels. Configurable per channel for ±100 mV, ±500 mV, ±1 V, ±5 V, ±10 V, 0–100 mV, 0–500 mV, 0–1 V, 0–5 V, 0–10 V, ±20 mA, 0–20 mA, 4–20 mA, and thermocouple types J, K, T, E, R, S, B, N. - **High‑Resolution Data Acquisition:** 16‑bit A/D conversion with 2.5 samples/sec per channel, ±0.1 % FSR accuracy. - **Independent Channel Configuration:** Each channel can be individually set for voltage, current, or thermocouple input, enabling mixed‑signal acquisition within one module. - **Cold Junction Compensation (CJC):** Integrated thermal sensor for automatic CJC when using thermocouples. - **Sensor Burn‑Out and Disconnection Detection:** Detects open‑circuit or failed sensors for voltage, current, and thermocouple inputs. - **High Isolation and Protection:** 3 kV DC isolation between power, communication, and I/O; ±35 V input overvoltage protection; 240 V channel‑to‑channel isolation. - **Wide Power Supply Range:** Operates from +10 V DC to +60 V DC (ripple ≤ 5 V p‑p). - **Compact, Space‑Saving Design:** Slim 47.2 mm vertical housing allows dense DIN‑rail installation; up to 1.5× more modules per panel compared to conventional flat designs. - **Hot‑Swap and Auto‑Configuration:** Modules can be replaced without rewiring; configuration stored in removable EEPROM for quick restoration. - **Programmable Power‑On and Safety Values:** Ensures safe output states during startup or communication failure. - **Easy Node Addressing:** Two rotary switches for Modbus node address (1–247) – no PC required. - **Diagnostic LED Indicators:** Three front LEDs display power, communication, and system status for quick on‑site troubleshooting. - **Rugged Industrial Reliability:** Built‑in hardware and system watchdogs automatically recover from communication or system faults. - **Modbus/RTU Communication:** Baud rates from 1200 bps to 115.2 kbps; communication distance up to 1.2 km over RS‑485.

Manufacturer: Advanio

Category: Ethernet / USB / RS485 / RS232 Modbus IO

- **Universal 16‑Channel Thermocouple/Analog Input:** Accepts direct connection of J, K, T, E, R, S, B, N thermocouples or low‑level voltage signals (±100 mV to ±10 V). - **High‑Resolution Data Acquisition:** 16‑bit A/D conversion with 2.5 samples per second per channel ensures precise measurement for temperature and voltage inputs. - **Cold Junction Compensation (CJC):** Integrated temperature sensor provides automatic cold‑junction compensation for thermocouple accuracy. - **Independent Channel Configuration:** Each channel can be individually configured for input type and range via Modbus registers. - **Sensor Burn‑Out and Disconnection Detection:** Detects open‑circuit or failed sensors to prevent erroneous readings and unsafe control actions. - **Electrical Isolation:** 3 kV DC isolation between power, communication, and I/O circuits protects against ground loops and industrial noise. - **Wide Power Supply Range:** Operates from **+10 V DC to +60 V DC** with reverse‑polarity protection; ripple peak ≤ 5 V. - **Hot‑Swap and Auto‑Configuration:** Modules can be replaced without rewiring; configuration stored in removable EEPROM for quick restoration. - **Compact, Space‑Saving Design:** Slim 47.2 mm vertical housing allows dense DIN‑rail installation—up to 1.5× more modules per panel than flat‑mounted competitors. - **User‑Friendly Setup:** Modbus node address set by dual rotary switches (1–247); no PC required. - **Diagnostic LEDs:** Three front‑panel LEDs indicate power, communication, and system status for rapid on‑site troubleshooting. - **Programmable Power‑On and Safety Values:** Ensures controlled startup and safe fallback states during communication loss. - **Rugged Industrial Reliability:** Built‑in hardware and software watchdogs automatically recover from transient faults or host communication failures. - **Modbus/RTU Compatibility:** Fully compliant with standard Modbus RTU protocol; baud rates selectable from 1200 bps to 115.2 kbps.

Manufacturer: Advanio

Category: Ethernet / USB / RS485 / RS232 Modbus IO

- **16 Independent Analog Input Channels:** Each channel can be configured independently for voltage ranges of ±1 V, ±5 V, ±10 V, or 0–1/5/10 V. - **High Resolution and Accuracy:** 16‑bit A/D conversion with ±0.1 % FSR accuracy and 2.5 samples/s per channel. - **Wide Input Protection:** ±35 V overvoltage protection and 240 V channel‑to‑channel isolation safeguard against wiring errors and ground potential differences. - **Industrial‑Grade Isolation:** 3 kV DC isolation between power, communication, and I/O circuits ensures reliable operation in noisy environments. - **Flexible Power Supply:** Operates from +10 V DC to +60 V DC (ripple ≤ 5 V p‑p). - **Hot‑Swap and Auto‑Configuration:** Modules can be replaced without rewiring; configuration is stored in a removable EEPROM for quick restoration. - **Programmable Power‑On and Safety Values:** Ensures defined output states during startup or communication failure. - **Easy Node Addressing:** Two rotary switches allow Modbus node address setup (1–247) without software tools. - **LED Diagnostics:** Three front‑panel LEDs indicate power, communication, and system status for quick on‑site troubleshooting. - **Compact, Space‑Saving Design:** 47.2 mm slim vertical housing allows dense DIN‑rail installation. - **Rugged Industrial Reliability:** Built‑in hardware and system watchdogs automatically recover from communication or system faults. - **Modbus RTU Compatibility:** Standard RS‑485 interface supports baud rates from 1200 bps to 115.2 kbps and communication distances up to 1.2 km. - **Wide Operating Temperature:** −25 °C to +70 °C for harsh industrial environments. - **5‑Year Warranty:** Long‑term reliability backed by Advanio’s extended warranty program.

Manufacturer: Advanio

Category: Ethernet / USB / RS485 / RS232 Modbus IO

- **16 Independent Current Input Channels:** Each channel configurable for ±20 mA, 4–20 mA, or 0–20 mA input ranges. - **High‑Resolution Conversion:** 16‑bit A/D resolution with 2.5 samples per second per channel. - **High Accuracy:** ±0.1 % of Full‑Scale Range (FSR). - **Wide Power Input Range:** Operates from +10 V DC to +60 V DC (ripple ≤ 5 V p‑p). - **Robust Isolation:** 3 kV DC isolation between power, communication, and I/O circuits. - **Input Protection:** ±35 V overvoltage protection and 240 V channel‑to‑channel isolation. - **Hot‑Swap and Auto‑Configuration:** Modules can be replaced without rewiring; configuration stored in removable EEPROM. - **Programmable Power‑On and Safety Values:** Ensures safe system states during startup or communication loss. - **Sensor Disconnection Detection:** Detects open‑loop or failed sensors in 4–20 mA mode. - **Compact Design:** Slim 47.2 mm vertical housing for space‑constrained installations. - **Easy Node Addressing:** Dual rotary switches for Modbus node address (1–247). - **LED Diagnostics:** Three front‑panel LEDs indicate power, communication, and system status. - **Wide Temperature Range:** Operates from −25 °C to +70 °C. - **Industrial‑Grade Reliability:** Built‑in hardware and system watchdogs for self‑recovery. - **Modbus/RTU Compatibility:** Baud rates from 1200 bps to 115.2 kbps. - **5‑Year Warranty:** Long‑term reliability assurance.

Manufacturer: Advanio

Category: Ethernet / USB / RS485 / RS232 Modbus IO

- **Integrated Digital I/O:** 16 isolated digital input channels (dry/wet contact selectable) and 16 isolated NPN‑type digital output channels. - **RS‑485 Modbus/RTU Communication:** Standard Modbus RTU protocol with baud rates from 1.2 kbps to 115.2 kbps; supports up to 1.2 km communication distance. - **Flexible Input Configuration:** Each input channel can be configured for dry or wet contact operation, with programmable logic polarity (normal/inverted). - **Advanced Diagnostics:** Three front‑panel LEDs indicate power, communication, and system status for quick on‑site troubleshooting. - **Hot‑Swap and Auto‑Configuration:** Modules can be replaced without rewiring; configuration parameters are stored in a removable EEPROM for rapid recovery. - **Programmable Power‑On and Safety States:** User‑defined startup and fail‑safe output values prevent unintended actuator operation during power‑up or communication loss. - **High Isolation and Protection:** 2.5 kV DC isolation between I/O, power, and communication circuits; ±70 V input over‑voltage protection. - **Wide Power Supply Range:** Operates from +10 V DC to +60 V DC (ripple ≤ 5 V p‑p), supporting 12 V, 24 V, 36 V, and 48 V industrial supplies. - **Compact, Space‑Saving Design:** 47.2 mm slim vertical housing allows 1.5× higher module density than conventional flat‑mount I/O devices. - **Industrial‑Grade Reliability:** Built‑in hardware and software watchdogs ensure automatic recovery from communication or system faults. - **User‑Friendly Configuration:** Modbus node address set via dual rotary switches (1–247); no PC required for basic setup. - **Long‑Term Warranty:** 5‑year manufacturer warranty covering defects under normal industrial operation.

Manufacturer: Advanio

Category: Ethernet / USB / RS485 / RS232 Modbus IO

- **16 Isolated Digital Inputs:** Supports both dry and wet contact modes for flexible integration with sensors, switches, and logic signals. - **Dry/Wet Configurable Inputs:** - *Dry Contact:* Logic 0 = open, Logic 1 = closed to GND. - *Wet Contact:* Logic 0 ≤ 3 V DC, Logic 1 = 10 – 50 V DC. - **High Isolation:** 2.5 kV DC isolation between channels and system logic for noise immunity and protection. - **DI Latch Function:** Captures transient input pulses ≥ 5 ms to ensure reliable detection of short‑duration events. - **Integrated Counter Function:** 16‑bit counters on each channel, up to 100 Hz input frequency. - **Normal/Inverted Logic Selection:** Each input can be configured as normal or inverted for compatibility with existing control logic. - **Hot‑Swap and Auto‑Configuration:** Modules can be replaced without rewiring; configuration stored in removable EEPROM for quick recovery. - **Rotary Switch Addressing:** Two rotary switches allow simple Modbus node address setup (1 – 247). - **Wide Power Input Range:** +10 V DC to +60 V DC (ripple ≤ 5 V p‑p). - **Compact Form Factor:** 47.2 mm slim vertical housing for space‑constrained installations. - **LED Diagnostics:** Three front‑panel LEDs indicate power, communication, and system status for quick on‑site troubleshooting. - **Programmable Safety Values:** User‑defined safe states on power‑on or communication failure. - **Watchdog Protection:** Hardware and software watchdogs ensure automatic recovery from communication or system faults. - **Industrial‑Grade Design:** Operating temperature –25 °C to +70 °C; humidity 5 – 95 % RH; EMC‑tested for EMI/EMS compliance. - **Modbus/RTU Communication:** Standard RS‑485 interface supporting baud rates from 1200 bps to 115.2 kbps. - **Long‑Distance Communication:** Up to 1.2 km over RS‑485 network; supports daisy‑chain, star, or mixed topologies. - **5‑Year Warranty:** Extended manufacturer warranty ensuring long‑term reliability.

Manufacturer: Advanio

Category: Ethernet / USB / RS485 / RS232 Modbus IO

ExpertDAQ Digital Input modules communicate via RS485 and are available with Modbus RTU, Within one RS485-network up to 256 modules may be controlled, Without a RS485 Repeater the maximum cable length is 1200m, The RS485 Digital IO module are sturdy, power saving and easy to use, the EX9053D has 16 channels with a low input impedance, The Digital Input RS485 module has a LED-display for each channel and was developed for use in a wide temperature range, features: 16 digital inputs, LED-display for each channel, extended temperature range, low input impendance, Digital Level 0:

Manufacturer: TOPSCCC

Category: Module AD DIO

- **16 Isolated Digital Inputs:** Supports both dry and wet contact configurations for versatile signal acquisition. - **DI Latch Function:** Captures transient signals ≥ 5 ms to ensure reliable detection of short pulses. - **DI Counter Function:** Built‑in 16‑bit counter per channel, supporting up to 100 Hz input frequency. - **Normal/Inverted Logic Selection:** Each input channel can be configured for normal or inverted logic, simplifying integration into existing systems. - **High Isolation Protection:** 2.5 kV isolation between channels and system circuitry for robust noise immunity. - **Wide Input Voltage Range:** Accepts up to ± 55 V DC on input channels. - **Flexible Power Supply:** Operates from +10 V DC to +60 V DC; ripple peak ≤ 5 V. - **Dual Communication Interfaces:** Integrated Wi‑Fi and LAN ports supporting Modbus‑TCP and Modbus‑RTU for hybrid network environments. - **High‑Speed Serial Communication:** Baud rate configurable from 1200 bps to 115.2 kbps. - **LED Indicators:** Dedicated System, Configuration, and WLAN LEDs for quick status diagnostics. - **Industrial‑Grade Design:** Operating temperature –25 °C to +70 °C; humidity 5–95 % RH. - **Compact and Lightweight:** Space‑saving vertical form factor; 120.1 × 94.4 × 121.1 mm; approx. 360 g. - **Low Power Consumption:** 200 mA @ 24 V DC typical. - **Long‑Term Reliability:** Designed for continuous operation in harsh industrial environments with watchdog protection and EEPROM configuration backup.

Manufacturer: Advanio

Category: Ethernet / USB / RS485 / RS232 Modbus IO

- **16 Digital Output Channels:** Each channel is a non-isolated open-collector transistor output (NPN type) capable of sinking up to 100 mA at 30 V DC. - **RS-485 Communication:** Two-wire serial interface supporting multiple baud rates (1200 bps to 115.2 kbps). - **Protocol Support:** - EX9043D: ASCII command protocol. - EX9043D-M: ASCII and Modbus RTU selectable via EEPROM. - **High Channel Density:** Compact 16-channel configuration for efficient space utilization in control panels. - **Extended Temperature Range:** Operates reliably from −25 °C to +75 °C, suitable for industrial and outdoor environments. - **Dual Watchdog System:** Hardware (module) and software (host) watchdogs ensure continuous operation and fail-safe output states. - **EEPROM Configuration Storage:** Retains module address, baud rate, and other settings even after power loss. - **LED Indicators:** 16 status LEDs display the state of each digital output channel for quick diagnostics. - **Flexible Power Supply:** Operates from +10 V DC to +30 V DC with low power consumption (1.1 W for EX9043D, 1.2 W for EX9043D-M). - **INIT* Mode:** Simplifies module reconfiguration and recovery of forgotten settings. - **Manual or Software Configuration:** Adjustable via jumpers, rear switches, or configuration commands. - **High Isolation Voltage:** 3750 Vrms isolation between communication and I/O circuitry for noise immunity. - **Compact and Rugged Design:** Built for industrial-grade reliability and long-term deployment.

Manufacturer: TOPSCCC

Category: Module AD DIO

- **16 Digital Output Channels:** Provides 16 non-isolated, single-ended open-collector outputs for flexible control of external devices. - **Open Collector Transistor Outputs:** NPN-type outputs capable of sinking up to 100 mA per channel at voltages up to 30 VDC. - **RS-485 Communication Interface:** Two-wire serial communication supporting multiple baud rates (1200 to 115200 bps). - **Network Scalability:** Up to 256 modules can be connected within a single RS-485 network, with a maximum cable length of 1200 meters without a repeater. - **LED Indicators:** Each output channel has a dedicated LED for visual status indication. - **Wide Power Supply Range:** Operates from +10 VDC to +30 VDC, allowing flexible integration into various power systems. - **Low Power Consumption:** Typical consumption of 1.1 W (EX9043D) or 1.2 W (EX9043D-M). - **Dual Watchdog System:** Hardware and software watchdogs ensure continuous operation and fail-safe output control. - **Extended Temperature Range:** Operates reliably from -25°C to +75°C, suitable for industrial environments. - **EEPROM Configuration Storage:** Retains configuration parameters such as address, baud rate, and data format. - **INIT* Mode:** Provides a recovery mode for resetting configuration parameters when communication settings are lost. - **Manual or Software Configuration:** Can be configured via jumpers, ASCII commands, or ExpertDAQ configuration software. - **Modbus RTU Support (EX9043D-M):** Enables integration with standard Modbus-based control systems. - **LED Display for Each Channel:** Facilitates quick diagnostics and monitoring of output states. - **Compact and Rugged Design:** Built for industrial reliability and long-term operation.

Manufacturer: TOPSCCC

Category: Module AD DIO

- **16 Isolated NPN Digital Outputs:** Each channel supports up to 500 mA load current with 3.5 – 30 V DC output range. - **RS‑485 Modbus/RTU Communication:** Standard industrial serial interface supporting baud rates from 1200 bps to 115.2 kbps and communication distances up to 1.2 km. - **Hot‑Swap and Auto‑Configuration:** Modules can be replaced without rewiring; configuration parameters are stored in a removable EEPROM for quick restoration. - **Programmable Power‑On and Safety Values:** User‑defined startup and fail‑safe output states ensure predictable behavior during power‑up or communication loss. - **High Isolation Protection:** 2.5 – 3.0 kV DC isolation between power, communication, and I/O circuits protects against industrial noise and surges. - **Wide Power Supply Range:** Operates from +10 V DC to +60 V DC (ripple ≤ 5 V p‑p), compatible with 12 V, 24 V, 36 V, and 48 V systems. - **Compact, Space‑Saving Design:** 47.2 mm slim vertical housing allows dense installation on DIN rails; up to 1.5 × more modules per panel compared to flat designs. - **Easy Node Addressing:** Two rotary switches set Modbus node address (1 – 247) without software tools. - **LED Diagnostics:** Three front‑panel LEDs indicate power, communication, and system status for quick on‑site troubleshooting. - **Rugged Industrial Reliability:** Built‑in hardware and system watchdogs automatically recover from communication or system faults. - **Modular Mounting System:** Detachable DIN‑rail base with integrated power and bus connectors simplifies installation and expansion. - **5‑Year Warranty:** Long‑term reliability backed by Advanio’s extended warranty and global support network.

Manufacturer: Advanio

Category: Ethernet / USB / RS485 / RS232 Modbus IO

- **High‑Density Relay Output:** 16 relay channels divided into 8 Form A (SPST‑NO) and 8 Form C (SPDT) contacts, providing flexible switching for AC and DC loads. - **Electrical Ratings:** Each relay supports up to **5 A @ 250 VAC / 30 VDC**, suitable for direct control of solenoids, contactors, lamps, and small motors. - **Communication Interface:** RS‑485 serial interface supporting **Modbus RTU** protocol for seamless integration with PLCs, PACs, HMIs, and SCADA systems. - **Configurable Logic:** Digital output channels can be configured as **normal or inverted logic**, allowing compatibility with existing control logic or replacement of legacy modules. - **Hot‑Swap and Auto‑Configuration:** Modules can be replaced without rewiring. Configuration data is stored in a removable **EEPROM**, enabling quick restoration of parameters to a replacement unit. - **Programmable Power‑On and Safety States:** Each output channel can be assigned a defined **power‑on value** and a **safe value** (activated when watchdog timeout or communication failure occurs). - **Isolation Protection:** 3 kV DC isolation between power, communication, and I/O circuits ensures noise immunity and protection against transient surges. - **Wide Power Supply Range:** Operates from **+10 V DC to +60 V DC** (ripple ≤ 5 V p‑p), compatible with 12 V, 24 V, 36 V, 48 V industrial supplies. - **Compact, Space‑Saving Design:** Slim 47.2 mm vertical housing allows dense installation on DIN rails, maximizing cabinet utilization. - **Diagnostic LEDs:** Three front‑panel LEDs indicate power, communication, and system status for quick on‑site troubleshooting. - **Industrial‑Grade Reliability:** Built‑in **module watchdog** and **system watchdog** automatically recover from transient faults or host communication loss. - **Ease of Configuration:** Modbus node address set via **two rotary switches** (1–247). Baud rate and parity configurable via software or Modbus registers. - **Environmental Robustness:** Operating temperature range **–25 °C to +70 °C**, humidity 5–95 % RH (non‑condensing). - **Long‑Term Warranty:** Backed by a **5‑year manufacturer warranty** covering defects under normal industrial operation.

Manufacturer: Advanio

Category: Ethernet / USB / RS485 / RS232 Modbus IO

- **16‑Channel Relay Output Module:** Provides 16 independent relay outputs divided into **8 Form A** and **8 Form C** contacts. - **High‑Voltage Contact Rating:** Each relay rated at **5 A @ 250 VAC** or **5 A @ 30 VDC**, suitable for switching both AC and DC loads. - **Flexible Logic Configuration:** Digital output (DO) channels can be configured as **normal or inverted**, allowing seamless replacement in existing systems without logic conflicts. - **Multi‑Interface Connectivity:** Supports **Wi‑Fi**, **LAN (Ethernet)**, and **Modbus‑TCP/RTU** communication, enabling integration with PLCs, SCADA, and cloud‑based IoT platforms. - **High Isolation Protection:** Electrical isolation up to **2.5 kV DC** between I/O and logic circuits ensures protection against industrial noise and surges. - **Wide Power Input Range:** Operates from **+10 VDC to +60 VDC**, accommodating 12 V, 24 V, 36 V, 48 V industrial supplies. Ripple peak must not exceed 5 V. - **Robust Industrial Design:** Designed for continuous operation in harsh environments with **operating temperature –25 °C to +70 °C** and **humidity 5–95 % RH**. - **Compact and Space‑Saving Form Factor:** Vertical housing (Wolf Series standard) with only 47.2 mm thickness allows dense DIN‑rail installation—up to 1.5 × more modules per panel compared to flat‑type I/O devices. - **Hot‑Swap and Auto‑Configuration:** Modules can be replaced without rewiring. Configuration stored in detachable **EEPROM** can be transferred to a new unit for instant restoration. - **Programmable Power‑On and Safety Values:** Each output can be assigned a defined state at power‑on and a safe state upon communication failure. - **Integrated Watchdog System:** Hardware and software watchdogs automatically reset the module or outputs to safe mode in case of network or system faults. - **LED Status Indicators:** Front‑panel LEDs for **System**, **Configuration**, and **WLAN** provide immediate visual diagnostics. - **Low Power Consumption:** Typical current draw **200 mA @ 24 VDC** (~4.8 W).

Manufacturer: Advanio

Category: Ethernet / USB / RS485 / RS232 Modbus IO

- **16‑Channel Thermocouple Input:** Supports 16 independent thermocouple channels for temperature measurement and process monitoring. - **Multi‑Type Sensor Compatibility:** Accepts thermocouple types **J, K, T, E, R, S, B, N** with automatic cold‑junction compensation (CJC). - **High‑Resolution Data Acquisition:** 16‑bit A/D conversion with a sampling rate of **2.7 samples/s per channel** for precise analog measurement. - **Dual Communication Interfaces:** - **Wi‑Fi IEEE 802.11 b/g/n** with built‑in antenna and optional external IPEX antenna. - **Modbus‑RTU (RS‑232/422/485)** and **Modbus‑TCP** over LAN/Wi‑Fi for flexible integration. - **Industrial‑Grade Isolation:** 3000 VDC isolation between power, communication, and I/O channels to ensure signal integrity and protection against noise. - **Wide Power Input Range:** Operates from **+10 VDC to +60 VDC**, optimized for 24 VDC industrial supplies. - **Low Power Consumption:** Typical consumption **1.6 W @ 24 VDC**. - **Compact, Space‑Saving Design:** 120.1 × 94.4 × 121.1 mm, weight ≈ 360 g; vertical DIN‑rail mounting allows 1.5× higher density than flat‑mount competitors. - **Hot‑Swap and Auto‑Configuration:** Detachable EEPROM retains configuration; modules can be replaced without rewiring. - **Programmable Power‑On and Safety Values:** Ensures safe output states during startup or communication failure. - **Rugged Environmental Tolerance:** Operating temperature **–25 °C to +70 °C**, humidity 5–95 % RH. - **Comprehensive Diagnostics:** LED indicators for power, communication, and system status; rotary switches for Modbus node addressing. - **Long‑Term Reliability:** Integrated hardware and system watchdogs for automatic recovery from communication or system faults. - **Warranty:** 5‑year manufacturer warranty.

Manufacturer: Advanio

Category: Ethernet / USB / RS485 / RS232 Modbus IO

- **16‑Channel 0–20 mA Differential Analog Input:** Supports 16 single‑ended or differential current input channels for high‑density signal acquisition. - **High Sampling Rate:** 100 kS/s per channel ensures accurate and fast data capture for dynamic process monitoring. - **16‑Bit Resolution:** Provides fine granularity and precision in current measurement. - **Wide Operating Temperature Range:** Fully functional from –20 °C to +60 °C, suitable for harsh industrial environments. - **Hot‑Swappable Design:** Modules can be replaced without powering down the system, minimizing downtime. - **Self‑Diagnostic Functions:** Monitors power, communication, and watchdog timer (WDT) status for system reliability. - **Quick‑Removable European‑Type Connector:** Phoenix Contact DFMC series connector allows easy wiring and maintenance. - **Compact Form Factor:** 100 mm (L) × 100 mm (H) module size optimizes panel space. - **IEC 61131 Compliance:** Meets international standards for programmable controller I/O modules. - **High Isolation Protection:** 2 kV DC isolation between channels, chassis, and ground ensures signal integrity and safety. - **Slave Module Health Monitoring:** Continuous status feedback through EtherCAT communication. - **Integration with LinkMasterPro™:** ADLINK’s Windows‑based EtherCAT configuration utility automatically detects modules and generates ESI (EtherCAT Slave Information) files.

Manufacturer: No category

Category: Modules

16-ch 16-bit 500KS/s PCIe multifunction DAQ card

PCI Express x1 multifunction DAQ card with 16 single-ended or 8 differential analog inputs, 16-bit resolution, up to 1 MS/s scanning or 4 MS/s single-channel, can function as 2-channel simultaneous DAQ, 2 analog outputs at 16-bit, 16 DI, 16 DO, 4 general-purpose 32-bit timer/counters, 2-channel encoder support, DMA support, 68-pin SCSI-type female connector, and 0°C to 60°C operation.

Manufacturer: Adlink Technology Inc.

Category: No category