- **ARM9 Architecture:** Powered by the Atmel AT91RM9200 ARM920T processor (180 MHz, 200 MIPS) with integrated Memory Management Unit (MMU), 16 KB instruction cache, and 16 KB data cache. - **Linux-Ready Platform:** Pre-installed Linux 2.6.x kernel with U-Boot 1.1.2 bootloader, supporting JFFS2, EXT2/EXT3, VFAT/FAT, and NFS file systems. - **Wide Temperature Operation:** Industrial-grade components ensure reliable operation from –20 °C to +80 °C (M-508T model). - **Non-Volatile SRAM:** 512 KB FRAM for data retention during power loss (M-508T only). - **Low Power Consumption:** Typical power draw of 600 mA at 5 VDC (

Hersteller: Artila

Kategorie: SBC Modules

- **Processor:** Freescale i.MX537 ARM Cortex-A8, 800 MHz - **Memory:** 1 GB DDR3 SDRAM (expandable to 2 GB optional) - **Storage:** 4 GB eMMC Flash onboard, SD card slot (up to 32 GB) - **Graphics:** Integrated GPU supporting OpenGL ES 1.1/2.0 and OpenVG 1.1 - **Display Interfaces:** - Dual 24-bit LVDS channels (up to 1600 × 1200 pixels) - Analog VGA output (synchronized with LVDS port 0) - Full HD 1080p video decode capability - **Networking:** 1 × 10/100 Mbps Ethernet (SMSC LAN8720AI PHY) - **Serial Interfaces:** - 4 × UART (COM1–COM4) supporting RS‑232/RS‑485 - 2 × CAN 2.0 channels - I²C, I²S, SPI, and 1‑Wire interfaces - **USB Connectivity:** - 1 × USB 2.0 Host (480 Mbps) - 1 × USB OTG (Mini‑AB) - **Audio:** I²S digital audio interface, Line‑Out and Mic‑In connectors - **Touchscreen:** 4‑wire resistive touch interface - **Storage Expansion:** SATA II interface for external drives - **GPIO:** 9 programmable general‑purpose I/O lines - **Power Input:** 3.3 V DC (module), 5 V DC and 9–48 V DC (starter kit) - **Form Factor:** 3.5‑inch embedded module (80 × 50 mm) - **Operating Systems:** Linux (Ubuntu 10.4 preinstalled), Android, Windows Compact 7 - **Additional Features:** Real‑time clock (RTC), watchdog timer, external battery backup

Hersteller: Artila

Kategorie: SBC Modules

- **Processor:** Freescale i.MX537 ARM Cortex-A8, 800 MHz core frequency - **Memory:** 1 GB DDR3 RAM (expandable to 2 GB optional) - **Storage:** 4 GB eMMC Flash onboard - **Graphics:** Integrated GPU supporting OpenGL ES 2.0, OpenVG 1.1, and full HD 1080p video decode - **Display Interfaces:** Dual 24-bit LVDS channels and analog VGA output (up to 1920×1080 @ 60 Hz) - **Touchscreen Support:** 4-wire resistive touchscreen interface - **Networking:** 10/100 Mbps Ethernet (SMSC LAN8720AI PHY) - **Serial Interfaces:** - 2 × RS-232 (one full, one 4-wire) - 1 × RS-485 - 2 × CAN 2.0 channels - **USB Connectivity:** - 4 × USB 2.0 Host ports - 1 × USB OTG (Mini-AB) - **Expansion Interfaces:** SATA, SD, SPI, I²C, I²S, 1-Wire, GPIO - **Power Input:** 9–48 VDC wide-range input (5V and 3.3V internal rails) - **Operating Temperature:** 0°C to +70°C - **Form Factor:** 146 mm × 102 mm (3.5-inch board) - **Operating Systems Supported:** Ubuntu Linux 10.4 (preinstalled), Android, Windows Compact 7.0 - **Fanless Design:** Passive cooling for industrial reliability

Hersteller: Artila

Kategorie: SBC Modules

- **High‑Performance ARM9 Processor:** 400 MHz Atmel AT91SAM9G45 CPU with integrated MMU (Memory Management Unit) for full Linux support. - **Pre‑installed Linux Environment:** Linux kernel 2.6.38 with U‑Boot bootloader and root file system pre‑loaded in NAND Flash. - **Integrated Memory:** 128 MB DDR2 SDRAM and 256 MB NAND Flash, plus 2 MB DataFlash® for system backup. - **Networking:** On‑board 10/100 Mbps Ethernet interface with integrated PHY (DAVICOM DM9161) and 1.5 kV magnetic isolation. - **Display & Touch Interface:** 24‑bit TTL LCD interface supporting up to 1280 × 860 TFT panels with dimming and backlight control; 4‑wire resistive touchscreen interface. - **Multiple Serial Interfaces:** Four UARTs (up to 921.6 kbps) with hardware flow control and software‑configurable RS‑232/RS‑485 modes. - **USB Connectivity:** One USB 2.0 high‑speed (480 Mbps) host port and one USB 2.0 device (client) port. - **Expandable I/O:** 15 GPIO pins (CMOS/3.3 V compatible), I²C, SPI, I²S, and AC97 interfaces. - **Storage Expansion:** SD/MMC interface supporting SD 2.0 cards up to 32 GB. - **Low Power Consumption:** Operates from 3.0 – 3.6 V DC (3.3 V nominal) with typical power draw under 2.5 W. - **Compact Form Factor:** 80 mm × 50 mm board with 128‑pin (2.0 mm pitch) connectors. - **Industrial‑Grade Reliability:** Operating temperature range 0 °C – 70 °C; on‑board watchdog timer and real‑time clock with lithium backup battery. - **Comprehensive Software Stack:** Includes GNU C/C++ toolchain, web server (lighttpd), SSH, FTP, Telnet, MySQL, PHP, Python, Perl, QT4‑Embedded, GTK+, and more.

Hersteller: Artila

Kategorie: SBC Modules

- **Processor:** Atmel AT91SAM9G45 ARM9 CPU, 400 MHz with Memory Management Unit (MMU). - **Operating System:** Linux kernel 2.6.38 pre‑installed with U‑Boot bootloader. - **Memory:** 128 MB DDR2 SDRAM, 256 MB NAND Flash, and 2 MB DataFlash® for system backup. - **Compact Form Factor:** SoM dimensions 50 × 80 mm; carrier board designed for direct integration. - **Low Power Consumption:** Typical power usage below 2.5 W. - **Display Support:** 24‑bit TTL LCD interface with dimming control; supports TFT panels up to 1280 × 860 pixels. - **Touchscreen Interface:** 4‑wire resistive touchscreen support. - **Networking:** Integrated 10/100 Mbps Ethernet with on‑board PHY (DAVICOM DM9161) and 1.5 kV magnetic isolation. - **Multiple Serial Interfaces:** Four UARTs supporting up to 921.6 kbps with full modem control signals. - **USB Connectivity:** One USB 2.0 host port and one USB 2.0 device (client) port, both supporting 480 Mbps high‑speed mode. - **Peripheral Interfaces:** I²C, I²S, SPI, SD/MMC, GPIO, AC97 audio, and watchdog timers. - **Real‑Time Clock:** ST M41T81 RTC with on‑board 48 mAh lithium backup battery and external battery input. - **Software Ecosystem:** Pre‑installed Linux utilities, web server, SSH, FTP, and package management via IPKG. - **Development Tools:** GNU C/C++ cross‑compiler toolchain, GTK+, X11, GPE, and Qt4‑Embedded GUI support. - **Expansion and Debugging:** RS‑232 console port, GPIO headers, and local bus connectors for peripheral expansion. - **Starter Kit Availability:** Includes SoM, carrier board, power circuitry, and all essential I/O interfaces.

Hersteller: Artila

Kategorie: SBC Modules

- **High-performance ARM9 Processor:** Equipped with a 400 MHz Atmel AT91SAM9G45 CPU with integrated Memory Management Unit (MMU), enabling efficient multitasking and Linux kernel operation. - **Linux-ready Platform:** Preloaded with Linux kernel 2.6.38, U-Boot bootloader, and a complete GNU C/C++ toolchain for immediate development. - **Integrated Memory:** 128 MB DDR2 SDRAM and 256 MB NAND Flash, plus 2 MB DataFlash® for system backup. - **Compact and Efficient Design:** Small 50 × 80 mm SoM footprint with typical power consumption under 2.5 W. - **Comprehensive I/O Interfaces:** Includes Ethernet, multiple UARTs, USB host/client, I²C, SPI, I²S, SD card, GPIO, AC97, LCD, and touchscreen interfaces. - **Advanced Display Support:** 24-bit TTL LCD interface supporting TFT panels up to 1280 × 860 pixels with dimming and backlight control. - **Networking Capability:** Integrated 10/100 Mbps Ethernet interface with onboard PHY (DAVICOM DM9161) and 1.5 kV magnetic isolation. - **Rich Peripheral Support:** Compatible with USB flash drives, Wi-Fi adapters, webcams, keyboards, mice, 3G modems, and Bluetooth devices. - **Software Ecosystem:** Includes preinstalled utilities, daemons, and drivers for rapid deployment—SSH, FTP, web server (lighttpd), MySQL, PHP, Python, and more. - **Expandable and Customizable:** Supports IPKG package management for software installation and updates; customizable USB device drivers. - **Industrial-grade Reliability:** Features watchdog timers, RTC with battery backup, and robust GPIO control for embedded applications.

Hersteller: Artila

Kategorie: SBC Modules

- **Processor:** Atmel ATSAMA5D35 ARM Cortex‑A5 MPU, 536 MHz, with MMU and VFPv4 floating‑point unit. - **Memory:** 512 MB LPDDR2 SDRAM, 8 GB eMMC Flash, and 8 MB DataFlash for system backup. - **Networking:** Dual Ethernet interfaces — one Gigabit (Micrel KSZ9031RNXCA) and one 10/100 Mbps (Micrel KSZ8081RNAIA) with onboard transformers and 1.5 kV isolation. - **Serial Communication:** Four UARTs (up to 921.6 kbps) with hardware/software flow control; two CAN 2.0A/B interfaces. - **USB:** Two USB 2.0 high‑speed (480 Mbps) host ports and one USB device/console port. - **Expansion Interfaces:** SPI (4 chip selects), I²C, I²S (TX/RX), SD 2.0/SDHC, and 21 GPIO pins. - **Power Efficiency:** Single 5 V DC input, typical consumption 

Hersteller: Artila

Kategorie: SBC Modules

- **Processor:** Atmel ATSAMA5D35 ARM Cortex‑A5 MPU, 536 MHz, with MMU and VFPv4 floating‑point unit. - **Memory:** 512 MB LPDDR2 SDRAM, 8 GB eMMC Flash, and 8 MB DataFlash for system backup. - **Operating System:** Linux kernel 4.9.x with EXT4 file system and Barebox bootloader. - **Networking:** Dual Ethernet interfaces — one Gigabit (Micrel KSZ9031RNXCA) and one 10/100 Mbps (Micrel KSZ8081RNAIA). - **Interfaces:** SPI, I²C, I²S, UART × 4, CAN × 2, USB 2.0 Host × 2, SD 2.0 (SDHC), GPIO × 21. - **Power Efficiency:** Single 5 V DC input, typical consumption 0.75 W (

Hersteller: Artila

Kategorie: SBC Modules

- **Processor:** ARM Cortex‑A7 core (ATMEL/Microchip i.MX6ULL) optimized for low‑power embedded computing. - **Operating System:** Pre‑installed **Linux Kernel 4.14.x**, supporting standard GNU/Linux utilities and development environments. - **Memory Configuration:** - **512 MB LPDDR3 SDRAM** for high‑speed system memory. - **4 GB eMMC Flash** for OS and application storage. - **16 MB DataFlash** for bootloader and configuration data. - **Connectivity Interfaces:** - **4 × UART ports** (921.6 kbps each) with full hardware flow control (RTS/CTS). - **2 × USB 2.0** host/device ports. - **2 × 10/100 Mbps Ethernet** interfaces for dual‑LAN or redundant networking. - **8 × GPIO** (General Purpose Input/Output) lines for digital control and monitoring. - **Power Efficiency:** Operates on **5 V DC**, consuming **less than 1 W**, ideal for fanless and battery‑powered systems. - **Compact Form Factor:** **63 mm × 43 mm**, enabling integration into space‑constrained designs. - **Industrial Reliability:** Designed for continuous operation in industrial environments, supporting extended temperature ranges and stable long‑term supply. - **OEM‑Ready Design:** Provides a ready‑to‑integrate embedded computing core for custom carrier boards or system designs.

Hersteller: Artila

Kategorie: SBC Modules

M-X6ULL with CB-X6ULL carrier board with power circuitry, Ethernet, Serial port, USB, CAN, SD socket, mini-PCIe socket, 9..48VDC, Artila

Hersteller: Artila

Kategorie: SBC Modules

- **Optimized for 4G/LTE Networks:** Designed to operate across standard LTE frequency bands, ensuring compatibility with global cellular networks. - **High-Gain External Antenna:** Provides improved signal strength and stability, particularly in areas with weak cellular coverage. - **Industrial-Grade Construction:** Built with durable materials suitable for harsh environments, including outdoor and industrial installations. - **Flexible Mounting Options:** Supports magnetic, adhesive, or screw-mount configurations for versatile deployment. - **Extended Cable Assembly:** Includes a pre-terminated coaxial cable for easy connection to Artila devices or other compatible modems. - **Plug-and-Play Integration:** Fully compatible with Artila’s embedded systems and communication modules, requiring minimal configuration. - **Low VSWR (Voltage Standing Wave Ratio):** Ensures efficient power transfer and minimal signal loss. - **Weather-Resistant Design:** Suitable for both indoor and outdoor use, with protection against moisture, dust, and UV exposure. - **Compact Form Factor:** Streamlined design allows installation in constrained spaces without compromising performance. - **Enhanced Data Throughput:** Supports high-speed LTE data transmission for bandwidth-intensive applications such as video streaming, telemetry, and remote diagnostics.

Hersteller: Artila

Kategorie: Accessories

- **Purpose-Built for Matrix-512:** Designed and tested for compatibility with Artila’s Matrix-512 embedded system, ensuring seamless console communication. - **DB9F-to-DB9F Configuration:** Both ends feature **9-pin female D-sub connectors**, enabling direct connection to devices with male DB9 serial ports. - **High-Quality Construction:** Durable molded connectors and strain reliefs enhance mechanical stability and reduce wear during repeated use. - **Standard RS-232 Serial Interface:** Supports standard RS-232 signaling for console communication, device configuration, and serial data exchange. - **1-Meter Cable Length:** Provides sufficient reach for desktop or rack-mounted setups while minimizing signal degradation. - **Plug-and-Play Operation:** No drivers or software required; simply connect to compatible serial ports for immediate operation. - **Shielded Cable Design:** Internal shielding minimizes electromagnetic interference (EMI) and ensures signal integrity in electrically noisy environments. - **Versatile Application:** Suitable for console access, firmware updates, diagnostics, and serial communication between embedded systems, routers, or industrial controllers.

Hersteller: Artila

Kategorie: Accessories

- **Purpose-Built for Matrix-512:** Designed and tested by Artila for seamless integration with the Matrix-512 embedded computer. - **DB9F to DB9F Configuration:** Both ends feature standard **DB9 female connectors**, enabling direct connection to devices with DB9 male console or serial ports. - **100 cm Cable Length:** Provides sufficient reach for flexible installation and convenient access during configuration or maintenance. - **High-Quality Construction:** Built with durable materials to ensure long-term reliability in industrial and embedded environments. - **Stable Serial Communication:** Ensures consistent RS-232 signal transmission between the Matrix-512 and external devices. - **Plug-and-Play Operation:** No additional drivers or software required; simply connect to the console port for immediate use. - **Compact and Lightweight:** Easy to handle, store, and deploy in space-constrained installations. - **Official Artila Accessory:** Guaranteed compatibility and performance when used with Artila Matrix series products.

Hersteller: Artila

Kategorie: Accessories

- **Purpose-built for iPAC-50XX Series:** Designed specifically to connect the internal 10-pin serial port header of Artila’s iPAC-50XX controllers to external RS-232 devices. - **DB9 Male Connector:** Provides a standard RS-232 interface compatible with a wide range of serial peripherals such as modems, sensors, PLCs, and industrial instruments. - **10-pin IDC Header Interface:** Connects directly to the controller’s onboard serial port header, ensuring secure and correct pin alignment. - **Flat Ribbon Cable Construction:** Offers flexibility, compact routing, and easy installation within control panels or enclosures. - **Short 0.20 m Length:** Minimizes signal loss and electromagnetic interference (EMI) while maintaining sufficient reach for internal wiring. - **High Signal Integrity:** Designed for stable RS-232 communication with proper shielding and grounding through the DB9 connector. - **Plug-and-Play Compatibility:** No additional configuration required; simply connect the cable between the controller and the external device. - **Industrial-Grade Reliability:** Manufactured by Artila, known for robust embedded and industrial communication solutions.

Hersteller: Artila

Kategorie: Accessories

- **Purpose-Built Console Cable:** Designed for console communication between Artila embedded systems and standard RS-232 serial interfaces. - **Connector Type:** Wafer Box connector (board-side) to DB9 Female connector (host-side). - **Cable Length:** 50 cm (0.5 meters), providing optimal reach for rack-mounted or embedded installations. - **High Compatibility:** Fully compatible with Artila’s Matrix and PAC series devices, including Matrix-505/605, M-502/503/9G45A, and PAC-4000/4010/4070. - **Reliable Signal Transmission:** Ensures stable serial communication for configuration, monitoring, and maintenance. - **Compact and Flexible Design:** Short cable length minimizes clutter and signal degradation while maintaining flexibility for installation in tight spaces. - **Durable Construction:** Built with high-quality materials to withstand industrial environments and frequent connection cycles. - **Plug-and-Play Operation:** No additional drivers or software required; supports standard RS-232 communication protocols. - **Secure Connection:** Precision-molded connectors ensure firm mating and consistent electrical contact. - **OEM and Field Service Ready:** Ideal for system integrators, OEMs, and maintenance engineers requiring dependable console access.

Hersteller: Artila

Kategorie: Accessories

- **Purpose-Built for Matrix-5xx Series:** Designed to provide console connectivity for Artila’s Matrix-5xx embedded computing platforms, ensuring full compatibility and reliable communication. - **RJ45 to DB9F Interface:** Converts the RJ45 console port on the Matrix-5xx device to a standard DB9 female serial interface, allowing connection to PCs, laptops, or serial terminals. - **High-Quality Construction:** Manufactured with durable materials and precision-molded connectors to ensure long-term reliability in industrial and embedded environments. - **1-Meter Cable Length:** Provides sufficient reach for desktop or rack-mounted setups while minimizing signal degradation. - **Plug-and-Play Operation:** No external power or drivers required; supports direct serial communication through standard RS-232 signaling. - **Compatibility Note:** Specifically designed for Matrix-5xx models except Matrix-504, Matrix-518, and Matrix-522, which use different console interfaces. - **Color-Coded and Labeled Connectors:** Simplifies installation and identification in multi-device environments. - **Compact and Flexible Design:** Facilitates easy cable routing in confined spaces typical of embedded or industrial control cabinets.

Hersteller: Artila

Kategorie: Accessories

- **Purpose-Built for Matrix-5xx Series:** Engineered for seamless integration with Artila’s Matrix-5xx embedded computers, ensuring full compatibility and optimal signal integrity. - **Interface Conversion:** Converts an **RJ45 serial port** to a **DB9 female** connector, enabling connection to standard RS-232 serial devices. - **High-Quality Construction:** Manufactured with durable materials to withstand industrial conditions, ensuring long-term reliability and consistent performance. - **1.5-Meter Cable Length:** Provides sufficient reach for flexible equipment placement while minimizing signal degradation. - **Plug-and-Play Design:** No additional configuration required—simply connect to the Matrix-5xx RJ45 serial port and the target DB9 device. - **Secure Connection:** Precision-molded connectors ensure a tight, stable fit, reducing the risk of accidental disconnection or signal loss. - **Versatile Application:** Suitable for serial communication with modems, PLCs, sensors, industrial controllers, and other RS-232-compatible devices. - **Optimized Signal Transmission:** Shielded cable design minimizes electromagnetic interference (EMI) and cross-talk, ensuring stable data communication. - **Compact and Lightweight:** Designed for embedded and space-constrained environments where cable management and reliability are critical.

Hersteller: Artila

Kategorie: Accessories

- **Purpose-Built for Matrix Series:** Specifically engineered for Artila Matrix-500, Matrix-504, Matrix-510, Matrix-514, and Matrix-520 embedded computers. - **Interface Conversion:** Converts an RJ45 console port to a DB9 female (DB9F) serial connector, enabling direct connection to standard RS-232 serial ports on PCs or terminal devices. - **High Signal Integrity:** Ensures stable serial communication with minimal signal loss or interference, suitable for industrial and embedded applications. - **Compact 1-Meter Length:** Provides optimal reach for desktop or rack-mounted setups without excessive cable clutter. - **Plug-and-Play Operation:** No additional drivers or configuration required; supports direct serial communication for console access. - **Durable Construction:** Built with high-quality materials for long-term reliability in industrial environments. - **Universal Compatibility:** Works with any device requiring an RJ45-to-DB9F serial console connection, though optimized for Artila Matrix systems. - **Ease of Maintenance:** Facilitates firmware updates, system configuration, and troubleshooting through direct console access.

Hersteller: Artila

Kategorie: Accessories

- **Complete Mounting Solution:** Supplied as a set containing two DIN rail adapters and four screws, providing all necessary components for immediate installation. - **Universal DIN Rail Compatibility:** Designed to fit standard 35 mm DIN rails (commonly referred to as “Top Hat” rails, type TS35), ensuring compatibility with a wide range of industrial and electrical enclosures. - **Durable Construction:** The adapters are made from high-quality, impact-resistant grey polymer material, offering mechanical stability and long-term durability in demanding environments. - **Corrosion-Resistant Hardware:** Includes four V2A (AISI 304) stainless-steel screws, providing excellent resistance to corrosion, oxidation, and environmental wear. - **Compact and Lightweight Design:** Optimized for minimal space usage within control cabinets while maintaining secure attachment strength. - **Ease of Installation:** Simple screw-based mounting system allows quick attachment and removal without specialized tools. - **Versatile Application Range:** Suitable for mounting small enclosures, terminal blocks, power supplies, relays, PLC modules, and other DIN rail-compatible devices. - **Reliable Mechanical Support:** Ensures stable fixation of devices under vibration, temperature variation, and mechanical stress conditions typical in industrial environments. - **Standardized Dimensions:** Conforms to DIN EN 60715 rail dimensions, ensuring universal fit and interchangeability.

Hersteller: Artila

Kategorie: Accessories

GPS Antenna /Wire, Artila

Hersteller: Artila

Kategorie: Accessories

- **Wide Input Voltage Range:** Operates from 100 V AC to 240 V AC, 50/60 Hz, supporting global use within EU‑compatible regions. - **Stable 12 V DC Output:** Provides a regulated 12 V DC output with a maximum continuous current of 1 A (12 W total power). - **EU Plug Type:** Integrated Europlug (Type C or Type F, depending on variant) for direct use in European power outlets. - **Compact and Lightweight Design:** Optimized for minimal space usage and easy portability. - **High Efficiency Conversion:** Designed with switch‑mode power supply (SMPS) technology for efficient AC‑DC conversion and reduced heat generation. - **Overload and Short‑Circuit Protection:** Built‑in safety mechanisms protect both the adapter and connected devices. - **Over‑Voltage and Over‑Current Protection:** Ensures stable output and prevents damage to sensitive electronics. - **Low Ripple and Noise:** Provides clean DC output suitable for sensitive electronic circuits. - **Energy‑Efficient Operation:** Meets or exceeds typical energy efficiency standards for external power supplies. - **Universal Application:** Suitable for routers, LED lighting, CCTV cameras, small appliances, and other 12 V DC devices.

Hersteller: Artila

Kategorie: Accessories

- **Compact Half Mini PCIe Form Factor:** Designed for space-constrained embedded systems, compatible with standard Mini PCIe slots. - **Integrated Wireless Connectivity:** Provides IEEE 802.11b/g/n Wi-Fi functionality for high-speed wireless networking. - **High Data Throughput:** Supports data rates up to 150 Mbps (single-stream 802.11n) for efficient data transmission. - **Enhanced Range and Stability:** Includes external antenna and wire assembly to ensure optimal signal strength and coverage. - **Industrial Reliability:** Built for continuous operation in embedded and industrial environments with extended temperature tolerance. - **Flexible Integration:** Compatible with a wide range of embedded boards, single-board computers (SBCs), and industrial PCs. - **Low Power Consumption:** Optimized for energy-efficient operation, suitable for battery-powered or low-power embedded devices. - **Plug-and-Play Interface:** Standard PCI Express Mini Card interface simplifies installation and integration. - **Driver Support:** Compatible with major operating systems such as Linux, Windows, and embedded RTOS platforms. - **Secure Wireless Communication:** Supports WPA/WPA2 encryption and advanced security protocols for protected data transmission.

Hersteller: Artila

Kategorie: Accessories

- **Fanless Design:** The ACS-2101 employs a completely fanless thermal solution, ensuring silent operation and eliminating mechanical wear associated with moving parts. This design enhances reliability and reduces maintenance requirements. - **VIA Eden 733 MHz CPU:** Powered by the VIA Eden processor, the system offers a balance between performance and energy efficiency, ideal for embedded and industrial control applications. - **Memory Support:** One 168-pin SDRAM DIMM slot supporting up to 512 MB of system memory, allowing sufficient capacity for lightweight operating systems and embedded applications. - **Storage Options:** Provides space for a 2.5-inch HDD or SSD and includes one CompactFlash (CF) slot for solid-state storage or system boot media. - **Comprehensive I/O Connectivity:** - 2 × USB 2.0 ports for peripheral connectivity - 1 × 10/100 Mbps LAN port for network communication - 3 × RS-232 serial ports for legacy device integration - 1 × configurable RS-232/422/485 serial port for flexible industrial communication protocols - **Wide Power Input Range:** Operates from 11 to 28 VDC, supporting a variety of industrial power environments. An optional 230 VAC adapter is available for standard power sources. - **Compact and Rugged Construction:** With dimensions of 225 × 170 × 58 mm, the ACS-2101 is designed for space-constrained installations and can be easily integrated into control cabinets or kiosks. - **Industrial-Grade Reliability:** Designed for continuous operation in demanding environments, with robust components and passive cooling for extended service life.

Hersteller: Aplex

Kategorie: IPC Embedded System

- **Fanless Design:** Passive cooling architecture eliminates moving parts, reducing maintenance and improving reliability in harsh or dusty environments. - **Intel® Celeron® M 1 GHz Processor:** Provides stable performance for embedded and industrial control applications. - **Intel® 852GM Chipset:** Integrated graphics controller with VGA output for display connectivity. - **Memory Support:** One DDR266 SO-DIMM socket supporting up to 1 GB SDRAM. - **Dual PCI Expansion Slots:** Two standard PCI slots for additional interface cards, data acquisition modules, or communication controllers. - **Comprehensive I/O Connectivity:** - 3 × COM ports (serial interfaces) - 4 × USB 2.0 ports - 1 × 10/100 Mbps LAN port - 1 × PS/2 keyboard and mouse port - Audio I/O: Microphone, Line-in, Line-out - **Storage Options:** Space for one 2.5" HDD and one slim-type CDRW drive. - **Wide DC Power Input Range:** 11 VDC to 28 VDC input, with optional 230 VAC adapter for flexible deployment. - **Rugged Construction:** Heavy-duty steel chassis ensures durability and mechanical stability. - **Compact Form Factor:** Designed for wall-mount installation in space-constrained environments. - **Operating Temperature Range:** 0 °C to 50 °C (operating), -10 °C to 75 °C (storage). - **Compliance:** Meets CE and FCC Class A standards for electromagnetic compatibility and safety.

Hersteller: Aplex

Kategorie: IPC Embedded System

- **Processor:** Intel Pentium 4, 2.4 GHz – a proven single-core processor architecture optimized for embedded and industrial computing tasks. - **Chipset:** Intel 845GV – supports DDR266 SDRAM and integrated graphics, ensuring stable performance for industrial applications. - **Memory:** Supports up to 1 GB DDR266 SDRAM, allowing sufficient memory capacity for control, monitoring, and data processing tasks. - **Storage:** 1 × 2.5" HDD bay for compact hard disk installation, providing reliable data storage in vibration-prone environments. - **Optical Drive:** Integrated slim-type CDRW drive for data backup, software installation, and media access. - **Expansion Slots:** 2 × PCI slots for additional I/O cards, communication interfaces, or specialized industrial controllers. - **I/O Interfaces:** - 2 × COM ports (RS-232/422/485 configurable depending on configuration) - 2 × USB ports for peripheral connectivity - 1 × LAN port for Ethernet networking - **Power Supply:** Wide-range AC input (100–240 VAC), supporting global deployment and stable operation under varying power conditions. - **Compact Design:** Dimensions of 360 × 90 × 212.5 mm (410 × 95 mm with wall mount kit), optimized for space-constrained installations. - **Weight:** 3.4 kg, lightweight yet robust for industrial mounting. - **Mounting Options:** Wall-mount kit available, enabling flexible installation in control cabinets or on machinery. - **Industrial Reliability:** Designed for continuous operation in industrial environments, with stable thermal management and durable construction.

Hersteller: Aplex

Kategorie: IPC Embedded System