- **CompactPCI Compliance:** Fully compliant with PICMG 2.0 CompactPCI Specification Revision 2.1 and PCI 2.1 standards. - **Processor Support:** Socket‑370 FC‑PGA Pentium‑III (up to 850 MHz) or Celeron (up to 733 MHz) CPUs with on‑die L2 cache. - **Chipset:** Intel 440BX AGPset (82443BX + 82371EB PIIX4E). - **Memory:** One 144‑pin SO‑DIMM socket supporting up to 256 MB unbuffered SDRAM; optional ECC support for OEM configurations. - **Storage:** Integrated 2.5‑inch HDD bay (supports Flash2000™ flash disks 8 MB–1 GB) and DiskOnChip socket (up to 144 MB). - **Display:** On‑board SMI Lynx3DM SM721 AGP 2× VGA/LCD controller with 4 MB VRAM (8 MB optional); supports dual and simultaneous VGA/LCD display. - **Networking:** Intel 82559 10/100 Mb Ethernet controller with PXE remote‑boot capability. - **I/O Interfaces:** - 2 × USB 1.1 ports (front) - 2 × serial ports (COM1 RS‑232; COM2 RS‑232/422/485) - 1 × parallel port (SPP/EPP/ECP) - PS/2 keyboard and mouse connectors - VGA (DB‑15) and 24‑bit RGB‑TFT LCD connector - **Peripheral Expansion:** Supports up to 7 bus‑master PCI devices on CompactPCI peripheral slots. - **Watchdog Timer:** Programmable 1–255 seconds/minutes with software library support for DOS/Windows. - **Hardware Monitoring:** Winbond W83782D monitors CPU/system temperature, fan speed, and DC voltages. - **Power Management:** Award PnP BIOS with green functions, DMI support, and BIOS write protection. - **Environmental Robustness:** Designed for industrial environments with extended temperature, vibration, and shock tolerance. - **Rear I/O Transition Module:** cPCI‑R3700A provides additional connectors for COM2 and LCD interfaces.

Hersteller: Adlink Technology Inc.

Kategorie: cPCI CPU P-III Level

- **CompactPCI Compliance:** Fully compliant with PICMG 2.0 CompactPCI R2.1 and PCI Rev. 2.1 standards. - **Processor Support:** Socket‑370 FC‑PGA Pentium III (up to 850 MHz, 256 KB L2 cache, 100 MHz FSB) or Celeron (up to 733 MHz, 128 KB L2 cache, 66 MHz FSB). - **Memory:** One 144‑pin SO‑DIMM socket supporting up to 256 MB SDRAM (optional ECC). - **Chipset:** Intel 440BX AGPset (82443BX + 82371EB PIIX4E). - **Graphics:** SMI Lynx3DM SM721 AGP 2× controller with 4 MB VRAM (8 MB optional OEM). - VGA up to 1600×1200 (16‑bit color) or 1280×1024 (24‑bit color). - LCD support up to 1024×768 24‑bit RGB‑TFT. - Dual display (VGA + LCD) and simultaneous output. - **Networking:** Intel 82559 10/100 Mb Ethernet controller with PXE remote boot support. - **Storage:** - Integrated 2.5″ HDD bay (20 GB standard). - Two 44‑pin EIDE connectors supporting up to four IDE devices (UDMA/33). - DiskOnChip socket (up to 144 MB). - **I/O Interfaces:** - 2 × USB 1.1 ports (front). - 2 × serial ports (COM1 RS‑232 front, COM2 RS‑232/422/485 rear). - 1 × parallel port (Mini D‑Sub 26‑pin). - PS/2 keyboard and mouse connectors. - VGA (DB‑15), Ethernet (RJ‑45), Reset switch, LED indicators. - **Watchdog Timer:** Programmable 1–255 seconds or minutes with software library support for DOS/Windows. - **Hardware Monitoring:** Winbond W83782D monitors CPU temperature, fan speed, voltages. - **Form Factor:** 3U CompactPCI (160 × 100 mm), available in 2‑slot (8 TE/HP) and 3‑slot (12 TE/HP) widths. - **Environmental Design:** Industrial‑grade operation (0 – 60 °C), shock and vibration tested. - **Certifications:** CE, FCC, HALT tested for temperature and vibration stress. - **Power Management:** Award PnP BIOS with green function and DMI support. - **Software Support:** Drivers for Windows 95/98/ME/NT/2000, Linux, OS/2, Novell, SCO Unix, QNX, Solaris.

Hersteller: Adlink Technology Inc.

Kategorie: cPCI CPU P-III Level

- **CompactPCI 3U Form Factor:** Fully compliant with PICMG 2.0 R2.1 and PCI Rev. 2.1 specifications. - **Processor Support:** Socket-370 FC-PGA Pentium III (up to 850 MHz) or Celeron (up to 733 MHz). - **Chipset:** Intel 440BX AGPset (82443BX + 82371EB PIIX4E). - **Memory:** One 144-pin SO-DIMM socket supporting up to 256 MB SDRAM (optional ECC). - **Storage:** Integrated 2.5" HDD bay (up to 4.8 GB standard), optional slim 3.5" FDD, and DiskOnChip socket (up to 144 MB). - **Graphics:** SMI Lynx3DM SM721 AGP 2x VGA/LCD controller with 4 MB VRAM (8 MB optional). - **Display Support:** VGA up to 1600×1200, LCD up to 1024×768 (24-bit RGB-TFT), dual/simultaneous display. - **Networking:** Intel 82559 10/100Base-TX Ethernet controller with PXE remote boot support. - **I/O Interfaces:** - 2× USB 1.1 ports - 2× serial ports (COM1 RS-232, COM2 RS-232/422/485) - 1× parallel port (SPP/EPP/ECP) - PS/2 keyboard and mouse ports - **Watchdog Timer:** Programmable 1–255 seconds/minutes with software library support. - **Hardware Monitoring:** Winbond W83782D monitors CPU/system temperature, fan speed, and voltages. - **Power Management:** ACPI and BIOS-level green functions. - **Form Factor Options:** - cPCI-3700A: 3-slot (12TE/HP) with HDD and FDD - cPCI-3700A-2S: 2-slot (8TE/HP) with HDD only - **Operating Systems Supported:** Windows 95/98/ME/NT/2000, Linux, OS/2, SCO Unix, QNX, Solaris. - **Industrial Design:** Built for harsh environments with vibration and shock resistance.

Hersteller: Adlink Technology Inc.

Kategorie: cPCI CPU P-III Level

- **CompactPCI Compliance:** Fully compliant with PICMG 2.0 CompactPCI Specification Revision 2.1 and PCI Revision 2.1. - **Processor Support:** Socket-370 FC-PGA Pentium III (up to 850 MHz) or Celeron (up to 733 MHz) CPUs. - **Memory:** One 144-pin SO-DIMM socket supporting up to 256 MB unbuffered SDRAM; optional ECC support for OEM configurations. - **Chipset:** Intel 440BX AGPset (82443BX + 82371EB PIIX4E). - **Integrated Graphics:** SMI Lynx3DM SM721 AGP 2x VGA/LCD controller with 4 MB VRAM (8 MB optional for OEM). Supports resolutions up to 1600×1200 (VGA) and 1024×768 (LCD). - **Networking:** Intel 82559 10/100 Mbps Ethernet controller with PXE remote boot support. - **Storage:** Built-in 2.5" HDD housing, two 44-pin EIDE connectors, and one DiskOnChip socket (up to 144 MB). - **I/O Interfaces:** Two USB 1.1 ports, two serial ports (COM1 RS-232, COM2 RS-232/422/485), one parallel port, PS/2 keyboard and mouse connectors. - **Form Factor:** 3U CompactPCI (160 mm × 100 mm), available in 12TE/HP (with FDD) or 8TE/HP (without FDD) widths. - **Environmental Design:** Operates from 0°C to 60°C, designed for industrial vibration and shock tolerance. - **System Monitoring:** Onboard Winbond W83782D hardware monitor for temperature, fan speed, and voltage. - **Watchdog Timer:** Programmable watchdog with 1–255 second or minute intervals. - **BIOS:** Award PnP BIOS with 2 Mb Flash ROM, DMI support, and BIOS write protection. - **Power Management:** ACPI and APM support, BIOS-controlled green functions. - **Certifications:** CE, FCC, HALT tested for temperature and vibration stress.

Hersteller: Adlink Technology Inc.

Kategorie: cPCI CPU P-III Level

- **CompactPCI Compliance:** Fully compliant with PICMG 2.0 CompactPCI Specification Revision 2.1 and PCI Revision 2.1. - **Processor Support:** Socket-370 FC-PGA Pentium III (up to 850 MHz) or Celeron (up to 733 MHz) CPUs. - **Chipset:** Intel 440BX AGPset (82443BX + 82371EB PIIX4E). - **Memory:** One 144-pin SO-DIMM socket supporting up to 256 MB unbuffered SDRAM; optional ECC support. - **Storage Integration:** Built-in housing for 2.5" low-profile HDD and separable slim-type 3.5" FDD. - **Display:** Onboard SMI Lynx3DM SM721 AGP 2x VGA/LCD controller with 4 MB VRAM (8 MB optional for OEM). - VGA up to 1600×1200 resolution. - LCD up to 1024×768 (24-bit RGB-TFT). - Dual and simultaneous VGA/LCD display support. - **Networking:** Integrated Intel 82559 10/100 Mbps Ethernet controller with PXE remote boot support. - **I/O Interfaces:** - 2 × USB 1.1 ports. - 2 × serial ports (COM1 RS-232; COM2 RS-232/422/485 selectable). - 1 × parallel port (SPP/EPP/ECP). - PS/2 keyboard and mouse connectors. - **Expansion:** Supports up to 7 PCI bus-mastering devices on CompactPCI peripheral slots. - **Watchdog Timer:** Programmable 1–255 seconds/minutes with software library support. - **Hardware Monitoring:** Winbond W83782D monitors CPU/system temperature, fan speed, and voltages. - **Form Factor:** 3U CompactPCI (160 mm × 100 mm), available in 12TE/HP (with FDD) or 8TE/HP (without FDD). - **Environmental Robustness:** Designed for industrial environments with extended temperature and vibration tolerance. - **Certifications:** CE, FCC, HALT tested for temperature and vibration stress.

Hersteller: Adlink Technology Inc.

Kategorie: cPCI CPU P-III Level

- **CompactPCI Compliance:** Fully compliant with **PICMG 2.0 R2.1** and **PICMG 2.1 Hot Swap R1.0**, ensuring compatibility with standard CompactPCI backplanes and peripheral modules. - **Processor Options:** Supports **Intel Low Power BGA2 Pentium-III** and **Celeron** processors. The cPCI-3720A/C42 specifically integrates a **Celeron 400 MHz** CPU with **128 KB on-die L2 cache**. - **Memory Support:** One **144-pin SO-DIMM socket** supporting up to **256 MB unbuffered SDRAM** (notebook standard). - **Dual Ethernet Connectivity:** Two **Intel 82559ER** controllers providing **10/100Base-TX** Ethernet ports with **IEEE 802.3**, **802.3u**, and **802.3x** compliance. - **Storage Interfaces:** Integrated **44-pin EIDE interface** supporting two IDE devices and a **CompactFlash socket** (8 MB to 512 MB). - **USB and Serial I/O:** Two **USB 1.1** ports (front and rear I/O), two **COM ports** (one RJ-45 on front, one on rear), and one **parallel port** on rear I/O. - **Peripheral Support:** Integrated **PS/2 keyboard and mouse connector**, **floppy drive interface**, and **watchdog timer**. - **Hardware Monitoring:** Onboard **Winbond W83782D** monitors CPU temperature, system temperature, and DC voltages. - **Hot-Swap Capability:** Supports **hot-swappable I/O** and single-board hot-swap operation in standalone environments. - **Environmental Robustness:** Designed for industrial conditions with operating temperature from **0°C to 55°C**, and vibration/shock resistance per industrial standards. - **Indicators and Controls:** Front panel includes **Active (Green)**, **HDD (Red)**, **WDT (Amber)**, and **General Purpose (Blue)** LEDs, plus a **reset switch**.

Hersteller: Adlink Technology Inc.

Kategorie: cPCI CPU P-III Level

- **PICMG 2.0 R2.1 and PICMG 2.1 R1.0 compliant:** Ensures interoperability and hot-swap capability within CompactPCI systems. - **3U CompactPCI form factor (100 mm x 160 mm):** Standardized size for embedded and industrial rack systems. - **Intel Low Power BGA2 Pentium III 700 MHz CPU:** Integrated 256 KB on-die L2 cache operating at full core speed. - **Dual 10/100 Mbps Ethernet ports:** Powered by Intel 82559ER controllers, supporting IEEE 802.3, 802.3u, and 802.3x standards. - **Memory support:** One 144-pin SO-DIMM socket for up to 256 MB unbuffered SDRAM. - **Integrated I/O:** Includes USB, serial, parallel, PS/2 keyboard/mouse, and IDE interfaces. - **CompactFlash IDE interface:** Supports flash storage from 8 MB to 512 MB. - **Award PnP BIOS:** 2 Mb Flash ROM with DMI support, BIOS write protection, and remote console capability. - **Hardware monitoring:** Onboard Winbond W83782D monitors CPU/system temperature and voltage levels. - **Watchdog timer:** Programmable from 1–255 seconds or minutes, with NMI or RESET output. - **Hot-swappable operation:** Supports single-board hot-swap functionality in standalone environments. - **Environmental resilience:** Operates from 0°C to 55°C, with vibration and shock tolerance for industrial use. - **Compliance:** CE and FCC certified, HALT tested for temperature and vibration stress.

Hersteller: Adlink Technology Inc.

Kategorie: cPCI CPU P-III Level

- **PICMG Compliance:** Fully compliant with PICMG 2.0 CompactPCI Specification Revision 2.1 and PICMG 2.1 Hot Swap Specification Revision 1.0. - **Processor Options:** Supports Intel Low Power BGA2 Pentium III (up to 1 GHz) and Celeron CPUs (up to 700 MHz). The cPCI-3720B/C42 model is equipped with a Celeron 400 MHz processor featuring 128 KB on-die L2 cache. - **Memory Support:** One 144-pin SO-DIMM socket supporting up to 256 MB unbuffered SDRAM. - **Dual Ethernet Connectivity:** Two 10/100 Mbps Ethernet ports powered by Intel 82559ER controllers, supporting IEEE 802.3, 802.3u, and 802.3x standards. - **Integrated I/O:** Includes USB, serial, parallel, PS/2 keyboard/mouse, IDE, and CompactFlash interfaces. - **Storage Options:** Internal CompactFlash IDE interface and support for 2.5" ATA HDD in the 2-slot configuration. - **Hot-Swap Capability:** Supports hot-swappable operation under single SBC environments. - **Hardware Monitoring:** Onboard Winbond W83782D chip monitors CPU temperature, system temperature, and DC voltages. - **Watchdog Timer:** Programmable watchdog timer with selectable NMI or system reset output. - **CompactPCI Bus Mastering:** Supports up to seven PCI bus-master devices on the CompactPCI backplane. - **Environmental Robustness:** Designed for industrial environments with extended temperature, vibration, and shock tolerance. - **Front Panel Indicators:** LEDs for system activity, HDD access, watchdog status, and general-purpose signaling.

Hersteller: Adlink Technology Inc.

Kategorie: cPCI CPU P-III Level

- **CompactPCI Compliance:** Fully compliant with PICMG 2.0 R2.1 and PICMG 2.1 Hot Swap R1.0 specifications, ensuring interoperability and modularity within CompactPCI systems. - **Processor Options:** Supports Intel Low Power BGA2 Pentium III (256KB on-die L2 cache) and Celeron (128KB on-die L2 cache) CPUs. The cPCI-3720B/P72 is equipped with a Pentium III 700 MHz processor. - **Memory Support:** One 144-pin SO-DIMM socket supporting up to 256 MB unbuffered SDRAM (notebook standard). - **Dual Ethernet Connectivity:** Two 10/100 Mbps Ethernet ports powered by Intel 82559ER controllers, supporting IEEE 802.3, 802.3u, and 802.3x standards. - **Integrated I/O Interfaces:** Includes USB, serial (COM1/COM2), parallel, PS/2 keyboard/mouse, IDE, CompactFlash, and FDD interfaces. - **Storage Flexibility:** Internal CompactFlash IDE interface and modular 2.5" ATA HDD mechanism for the 2-slot version. - **Hot-Swap Capability:** Supports hot-swappable I/O and single-board hot-swap operation under specific configurations. - **Hardware Monitoring:** Onboard Winbond W83782D monitors CPU temperature, system temperature, and DC voltages. - **Watchdog Timer:** Programmable watchdog timer configurable from 1–255 seconds or 1–255 minutes, with NMI or RESET interrupt options. - **Environmental Robustness:** Designed for industrial environments with operating temperature range 0–55°C, vibration and shock resistance, and CE/FCC compliance. - **Compact 3U Form Factor:** Standard 100 mm x 160 mm board size, optimized for space-constrained embedded systems.

Hersteller: Adlink Technology Inc.

Kategorie: cPCI CPU P-III Level

Slim type floppy expansion kit for cPCI-3720 series

Hersteller: Adlink Technology Inc.

Kategorie: cPCI CPU P-III Level

- **CompactPCI 3U Form Factor:** Fully compliant with the PICMG CompactPCI 3U standard, featuring a 2 mm-pitch HM (IEC-1076) connector for backplane interfacing. - **Processor Support:** Compatible with Intel Pentium P54C/P55C, AMD K5/K6, and Cyrix M1/M2 processors up to 233 MHz (Pentium MMX up to 266 MHz supported). - **Memory Architecture:** One 144-pin SO-DIMM socket supporting 3.3V FPM/EDO DRAM modules from 2 MB to 128 MB (expandable to 256 MB with dual sockets on certain configurations). - **Integrated Cache:** 512 KB second-level pipeline burst cache for enhanced data throughput and CPU performance. - **Chipset:** Intel 430HX (Triton II) system chipset with SMC37C669 I/O controller integrating floppy, serial, and parallel interfaces. - **Storage Options:** - Onboard 2.1 GB IDE hard disk drive (HDD) - 3.5" floppy disk drive (FDD) - DiskOnChip socket supporting 2 MB to 72 MB flash storage (M-Systems compatible) - **I/O Interfaces:** - Two USB ports - Two serial ports (one RS-232, one configurable RS-232/RS-422/RS-485) - One parallel port (EPP/ECP bi-directional) - PS/2 keyboard and mouse connectors - IDE and FDD connectors for storage devices - **Watchdog Timer:** Programmable watchdog timer with 14 selectable intervals (0–64 seconds) capable of generating system resets for fault recovery. - **Front Panel Design:** Aluminum Eurocard front plate with ejector handle for easy insertion/removal; available in 8 HP (HDD only) or 12 HP (HDD + FDD) configurations. - **Power and Thermal Efficiency:** Operates on +5V DC at 4.0A; designed for efficient heat dissipation in compact enclosures. - **Operating Temperature Range:** 0°C to 60°C (32°F to 140°F), suitable for industrial environments.

Hersteller: Adlink Technology Inc.

Kategorie: cPCI CPU LPP-266

- **CompactPCI 3U Form Factor:** Conforms to PICMG CompactPCI 3U mechanical and electrical standards, ensuring interoperability with standard CompactPCI backplanes and peripheral modules. - **Processor Support:** Compatible with Intel Pentium P54C/P55C, AMD K5/K6, and Cyrix M1/M2 processors up to 233 MHz. The board supports Pentium MMX technology for enhanced multimedia and computational performance. - **Memory Architecture:** One 144-pin SO-DIMM socket supporting 3.3V FPM or EDO DRAM modules from 2 MB to 128 MB (expandable to 256 MB with dual SO-DIMM configuration on certain variants). - **Cache System:** Integrated 512 KB second-level pipeline burst cache for improved data throughput and reduced latency. - **Chipset:** Utilizes Intel 430HX (Triton II) chipset for system control and SMC37C669 for I/O management, integrating floppy, serial, and parallel port controllers. - **Storage Options:** - Socket for M-Systems DiskOnChip (2 MB to 72 MB capacity) for solid-state storage. - Dual IDE interfaces supporting up to two PCI Mode 4 Enhanced IDE hard drives. - Floppy disk controller supporting up to two drives (3.5" or 5.25"). - **I/O Interfaces:** - Two serial ports (one RS-232, one configurable RS-232/RS-422/RS-485). - One parallel port (EPP/ECP bi-directional). - Two USB ports mounted on the front bracket. - PS/2 keyboard and mouse connectors (6-pin Mini-DIN). - **Watchdog Timer:** Programmable watchdog timer with 14 selectable intervals (0–64 seconds) capable of generating system resets for fault recovery. - **Front Panel Design:** Aluminum Eurocard front plate with ejector handles for easy insertion/removal. Available in 8 HP (with HDD) or 12 HP (with HDD and FDD) configurations. - **Power and Thermal Efficiency:** Operates on +5V DC at 4.0A. Designed for efficient heat dissipation suitable for fanless or ruggedized systems. - **Operating Environment:** Temperature range: 0°C to 60°C (32°F to 140°F).

Hersteller: Adlink Technology Inc.

Kategorie: cPCI CPU LPP-266

- **Processor Support:** Compatible with Intel Pentium P54C/P55C, AMD K5/K6, and Cyrix M1/M2 CPUs up to 233 MHz. - **Chipset:** Utilizes the Intel 430HX (Triton II) chipset for stable and efficient system performance. - **Memory:** One 144-pin SO-DIMM socket supporting 3.3V FPM or EDO DRAM modules up to 128 MB (expandable to 256 MB with dual sockets on certain configurations). - **Cache:** 512 KB second-level pipeline burst cache for enhanced data throughput. - **Storage Options:** - Integrated 2.1 GB IDE hard disk drive (HDD). - Socket for M-Systems DiskOnChip solid-state storage (2 MB to 72 MB). - Support for up to two IDE devices (Mode 4 Enhanced IDE). - Support for up to two floppy drives (3.5" or 5.25"). - **I/O Interfaces:** - Two serial ports (one RS-232, one configurable RS-232/RS-422/RS-485). - One parallel port (EPP/ECP bi-directional). - Two USB ports. - PS/2 keyboard and mouse connectors. - **Watchdog Timer:** Programmable watchdog timer with 14 selectable intervals (0–64 seconds) capable of generating system resets. - **CompactPCI Interface:** Fully compliant with PICMG CompactPCI 3U standard, using 2 mm-pitch HM connectors. - **Form Factor:** 3U Eurocard (100 mm x 160 mm) with 8 HP or 12 HP front panel options. - **Operating Temperature:** 0°C to 60°C (32°F to 140°F). - **Power Requirements:** +5V DC at 4.0A.

Hersteller: Adlink Technology Inc.

Kategorie: cPCI CPU LPP-266

- **CompactPCI Compliance:** Fully compliant with PICMG 2.0 R2.1 and PICMG 2.1 Hot Swap R1.0 specifications. - **Low Power Pentium-MMX Processor:** Socket-7 PPGA CPU up to 266 MHz with 512 KB L2 cache. - **Intel 430TX Chipset:** Incorporates Intel 82439TX (MTXC) and 82371EB (PIIX4E) for stable performance. - **Memory Support:** One 144-pin SO-DIMM socket supporting up to 256 MB unbuffered SDRAM. - **Integrated Storage:** Built-in housing for a 2.5" low-profile IDE HDD (≥5 GB) and one DiskOnChip socket (up to 144 MB). - **I/O Interfaces:** Two USB 1.1 ports, two serial ports (COM1 RS-232, COM2 RS-232/422/485), one parallel port, PS/2 keyboard and mouse connectors. - **Ethernet Networking:** Onboard Intel 82559 controller supporting 10/100Base-TX with PXE remote boot capability. - **Watchdog Timers:** Dual programmable watchdog timers for system reliability. - **Hardware Monitoring:** Winbond W83781D monitors CPU temperature, fan speed, and system voltages. - **Hot Swap Support:** Designed for CompactPCI hot-swap environments. - **Form Factor Options:** Available in 2-slot (8TE/HP) and 3-slot (12TE/HP) configurations. - **Environmental Robustness:** Operating temperature 0–60°C, vibration and shock tested for industrial use. - **Certifications:** CE and FCC compliant, HALT tested for temperature and vibration stress.

Hersteller: Adlink Technology Inc.

Kategorie: cPCI CPU LPP-266

- **CompactPCI Compliance:** Fully compliant with PICMG 2.0 R2.1 and PICMG 2.1 Hot Swap R1.0 specifications. - **Low‑Power CPU:** Socket‑7 PPGA Low‑Power Pentium‑MMX processor up to 266 MHz with 512 KB L2 cache. - **Intel 430TX Chipset:** Incorporates Intel 82439TX (MTXC) and 82371EB (PIIX4E) for stable, legacy‑compatible performance. - **Memory Support:** One 144‑pin SO‑DIMM socket supporting up to 256 MB unbuffered SDRAM. - **Integrated Networking:** Onboard Intel 82559 10/100 Mb Ethernet controller with PXE remote‑boot support. - **Storage Options:** Two 44‑pin EIDE connectors supporting up to four IDE devices; one DiskOnChip socket supporting up to 144 MB DOC flash; onboard 32 MB flash disk. - **Peripheral Interfaces:** Two USB 1.1 ports, two serial ports (RS‑232 and RS‑232/422/485), one parallel port, PS/2 keyboard and mouse ports. - **Watchdog Timers:** Dual programmable watchdog timers (WDT1 and WDT2) for system reliability. - **Hardware Monitoring:** Winbond W83781D chip monitors CPU temperature, fan speed, voltages. - **Hot Swap Support:** Compliant with CompactPCI Hot Swap specification for modular maintenance. - **Environmental Ruggedness:** Designed for industrial operation (0 – 60 °C operating range, shock and vibration tested). - **Form Factor Flexibility:** Available in 2‑slot (8TE/HP) and 3‑slot (12TE/HP) widths for different system requirements. - **BIOS Features:** Award PnP BIOS with 2 Mb Flash ROM, DMI support, power management, and custom OEM boot screen. - **PXE Network Boot:** Supports Intel Preboot Execution Environment for remote boot and network installation.

Hersteller: Adlink Technology Inc.

Kategorie: cPCI CPU LPP-266

- **CompactPCI Compliance:** Fully compliant with PICMG 2.0 R2.1 and PICMG 2.1 Hot Swap R1.0 specifications. - **Processor:** Socket‑7 PPGA Low‑Power Pentium‑MMX CPU up to 266 MHz. - **Chipset:** Intel 430TX (82439TX + 82371EB PIIX4E). - **Memory:** One 144‑pin SO‑DIMM socket supporting up to 256 MB unbuffered SDRAM. - **Storage:** - Integrated 2.5″ HDD bay (≥ 5 GB ATA HDD standard). - Slim‑type 3.5″ FDD module (separable). - Two 44‑pin EIDE connectors supporting up to four IDE devices. - DiskOnChip socket supporting up to 144 MB flash storage. - **Networking:** Onboard Intel 82559 10/100 Mb Ethernet controller with PXE remote boot support. - **I/O Interfaces:** - Two USB 1.1 ports (front panel). - Two serial ports (COM1 RS‑232, COM2 RS‑232/422/485 selectable). - One parallel port (Mini D‑Sub 26‑pin). - PS/2 keyboard and mouse connectors. - **System Monitoring:** Winbond W83781D hardware monitor for CPU/system temperature, fan speed, and voltage. - **Watchdog Timers:** Two independent programmable watchdog timers (WDT1 and WDT2). - **Form Factor:** 3U CompactPCI, available in 3‑slot (12 TE/HP) or 2‑slot (8 TE/HP) configurations. - **Indicators & Controls:** Power and IDE LEDs, Ethernet link/activity LEDs, and front‑panel reset switch. - **Environmental Robustness:** Designed for industrial temperature, vibration, and shock conditions. - **Software Support:** Drivers for Windows 95/98/NT/2000, Linux, SCO Unix, VxWorks, and Novell NetWare. - **Utility Support:** Hardware Doctor monitoring utility and PXE boot environment tools.

Hersteller: Adlink Technology Inc.

Kategorie: cPCI CPU LPP-266

- **CompactPCI Compliance:** Fully compliant with PICMG 2.0 R2.1 and PICMG 2.1 Hot Swap R1.0 specifications. - **Processor:** Socket‑7 PPGA Low‑Power Pentium‑MMX CPU up to 266 MHz. - **Chipset:** Intel 430TX (82439TX MTXC + 82371EB PIIX4E). - **Memory:** One 144‑pin SO‑DIMM socket supporting up to 256 MB SDRAM (3.3 V unbuffered). - **Storage:** - 32 MB onboard flash disk (Disk‑On‑Chip socket supports up to 144 MB). - Two 44‑pin EIDE connectors supporting up to four IDE devices (PIO Mode 3/4, Ultra DMA/33). - Built‑in housing for 2.5″ low‑profile HDD. - Separable slim‑type 3.5″ FDD module. - **Networking:** Integrated Intel 82559 10/100 Mb Ethernet controller with PXE remote boot support. - **I/O Interfaces:** - Two USB 1.1 ports (front panel). - Two serial ports (COM1 RS‑232, COM2 RS‑232/422/485). - One parallel port (SPP/EPP/ECP). - PS/2 keyboard and mouse connectors. - **System Management:** Dual watchdog timers, hardware monitoring (Winbond W83781D), and BIOS power management. - **Indicators & Controls:** Power LED, IDE activity LED, Ethernet link/speed LEDs, and reset switch. - **Form Factor:** 3U CompactPCI (100 × 160 mm), 3‑slot (12 TE/HP) width with FDD module. - **Environmental Robustness:** Designed for industrial applications with extended temperature and vibration tolerance. - **Software Support:** Drivers for Windows 95/98/NT/2000, Linux, Novell, SCO Unix, VxWorks, and DOS.

Hersteller: Adlink Technology Inc.

Kategorie: cPCI CPU LPP-266

- **Processor Support:** Intel Pentium MMX (P54C/P55C), AMD K5/K6, and Cyrix M1/M2 CPUs up to 233 MHz. - **Chipset:** Intel 430HX (Triton II) system chipset for stable and efficient performance. - **Memory:** Supports up to 256 MB of 3.3V FPM/EDO DRAM via two 144-pin SO-DIMM sockets (notebook standard). - **Cache:** 512 KB second-level pipeline burst cache for enhanced data throughput. - **Storage Options:** - Onboard **DiskOnChip socket** (M-Systems) supporting 2 MB to 72 MB flash storage. - Dual **IDE interfaces** supporting up to two PCI Mode 4 Enhanced IDE hard drives. - Dual **floppy drive interfaces** supporting 3.5" and/or 5.25" drives. - **I/O Interfaces:** - Two serial ports (one RS-232, one configurable RS-232/RS-422/RS-485). - One parallel port (EPP/ECP bi-directional). - Two USB ports. - PS/2 keyboard and mouse connectors. - **Watchdog Timer:** Programmable 0–64 second interval with system reset capability. - **CompactPCI Bus Interface:** Fully compliant with **PICMG 3U CompactPCI** standard. - **Front Panel Design:** Aluminum Eurocard front plate with ejector handle for easy installation/removal. - **Operating Temperature:** 0°C to 60°C (32°F to 140°F). - **Power Requirements:** +5V DC at 4.0A. The cPCI-8586 is engineered for rugged industrial environments, offering reliable operation, modular expandability, and long-term availability for embedded system integrators.

Hersteller: Adlink Technology Inc.

Kategorie: cPCI CPU LPP-266

- **CompactPCI 3U 4HP Form Factor:** Standard 3U height, 4HP width, fully compliant with PICMG® 2.0 R3.0 CompactPCI specifications. - **High‑Performance Networking:** Up to four Intel® 82574L Gigabit Ethernet controllers, each integrating MAC and PHY for full‑duplex 10/100/1000 Mbps operation. - **Flexible Port Configuration:** - Four RJ‑45 ports on the front panel (cPCI‑3E10). - Two of the four ports (LAN1/2) can be switched to the rear via the J2 connector and RTM. - Optional cPCI‑R3E10 RTM provides rear RJ‑45 access. - **Alternate Models:** - cPCI‑3E12: Two RJ‑45 Gigabit Ethernet ports. - cPCI‑3E10‑SUB: Two DB‑9 Fast Ethernet ports for rugged environments. - **PCI Bus Interface:** 32‑/64‑bit, 33/66 MHz CompactPCI interface supporting both 3.3V and 5V signaling. - **PCI Express Architecture:** Each Intel® 82574L controller operates on a PCIe 1.1 x1 lane, aggregated through a PEX8608 PCIe switch and PI7C9X130 PCIe‑to‑PCI bridge. - **Boot and Management:** - 128 KB onboard LAN Boot ROM supporting PXE 2.0 remote boot. - ACPI power management support. - **Environmental Robustness:** Operating temperature 0°C–60°C; storage −40°C–70°C; 95% non‑condensing humidity tolerance. - **OS Compatibility:** Windows XP, Vista, 7, Server 2003/2008, and Red Hat Enterprise Linux 5.0+. - **RoHS and WEEE Compliant:** Environmentally responsible design meeting EU directives.

Hersteller: Adlink Technology Inc.

Kategorie: cPCI Interface Cards

- **CompactPCI 3U 4HP Form Factor:** Standardized mechanical and electrical interface for industrial systems. - **Dual Gigabit Ethernet Ports:** Two independent 10/100/1000BASE‑T interfaces via RJ‑45 connectors on the front panel. - **Intel® 82574L Ethernet Controllers:** Two integrated MAC/PHY controllers providing PCIe 1.1 x1 connectivity per port. - **High‑Speed PCI Bus Interface:** Supports 32‑bit or 64‑bit CompactPCI bus at 33/66 MHz, 3.3 V or 5 V universal signaling. - **LAN Boot ROM:** 128 KB onboard ROM supporting PXE 2.0 for remote boot and network‑based system initialization. - **LED Indicators:** Dual “Link/Activity” LEDs per port for real‑time network status monitoring. - **Operating System Support:** Compatible with Windows XP, Vista, 7, Windows Server 2003/2008, and Red Hat Enterprise Linux 5.0+. - **Environmental Robustness:** Operating temperature range 0 °C – 60 °C; storage −40 °C – 70 °C; 95% non‑condensing humidity tolerance. - **Network Management:** ACPI power management and Intel PXE 2.0 preboot execution environment support. - **RoHS and WEEE Compliant:** Environmentally responsible design meeting EU directives.

Hersteller: Adlink Technology Inc.

Kategorie: cPCI Interface Cards

- **Dual‑Function Interface:** Combines 10Base‑T/100Base‑TX Fast Ethernet and Wide Ultra‑2 SCSI interfaces on a single CompactPCI card. - **High‑Performance Ethernet:** Utilizes the Intel® 82558 Ethernet controller supporting 10/100 Mbps operation with full‑duplex capability and auto‑negotiation (Nway). - **Advanced SCSI Controller:** Employs the Symbios® SYM53C895 PCI Wide Ultra‑2 SCSI controller supporting up to 80 MB/s transfer rates. - **Low Voltage Differential (LVD) Technology:** Enables extended SCSI cable lengths up to 12 meters while maintaining high‑speed data integrity. - **Backward Compatibility:** Fully compatible with SCSI‑1, SCSI‑2, Ultra SCSI, and Ultra‑Wide SCSI standards. - **Auto‑Switching Transmission Modes:** Automatically detects and adjusts between Single‑Ended (SE), Low Voltage Differential (LVD), and High Voltage Differential (HVD) modes. - **CompactPCI Compliance:** Fully compliant with PICMG 2.0 CompactPCI Rev. 2.0 specifications. - **Operating System Support:** Drivers available for DOS, Windows 95/98, Windows NT, OS/2, SCO UNIX, and Linux. - **Robust Industrial Design:** 3U form factor with front‑panel RJ‑45 and 68‑pin SCSI connectors, LED indicators, and jumper/switch configuration options. - **Regulatory Compliance:** Meets CE and FCC Class B standards for EMI/EMS performance.

Hersteller: Adlink Technology Inc.

Kategorie: cPCI Interface Cards

- **Dual-Speed Ethernet Support:** Supports both 10Base-T (10 Mb/s) and 100Base-TX (100 Mb/s) Fast Ethernet standards, allowing automatic speed negotiation based on network conditions and connected devices. - **CompactPCI Interface:** Designed for the CompactPCI (cPCI) bus architecture, ensuring compatibility with a wide range of industrial and embedded computing platforms that utilize the cPCI standard. - **PXE and Remote Boot Support:** Integrated PXE (Preboot Execution Environment) functionality enables network-based booting, allowing systems to boot from a remote server without requiring local storage. This is particularly useful for diskless workstations, thin clients, and centralized management environments. - **Alert-on-LAN Functionality:** Provides remote system monitoring and management capabilities, allowing administrators to receive alerts or perform remote wake-up and control operations over the network. - **External RJ-45 Connector:** Equipped with a standard RJ-45 port for straightforward Ethernet connectivity, supporting twisted-pair cabling for 10/100 Mb/s network connections. - **High Reliability and Industrial Design:** Built for continuous operation in industrial and embedded environments, featuring robust electrical design and adherence to CompactPCI mechanical and electrical standards. - **Plug-and-Play Compatibility:** Supports automatic configuration and detection by operating systems that recognize standard PCI network interface devices, simplifying installation and deployment. - **Low Power Consumption:** Optimized for energy efficiency, suitable for embedded systems and applications where power budgets are constrained.

Hersteller: Adlink Technology Inc.

Kategorie: cPCI Interface Cards

- **Dual-Speed Ethernet Support:** Compatible with both 10Base-T (10 Mbps) and 100Base-TX (100 Mbps) Fast Ethernet standards, allowing flexible network integration. - **Rear I/O Configuration:** Designed for rear I/O connectivity via a transition board, ideal for systems requiring front-panel space optimization or sealed front panels. - **PXE (Preboot Execution Environment) Support:** Enables remote booting and network-based system initialization, facilitating centralized management and deployment in distributed systems. - **Alert-on-LAN Functionality:** Provides remote system monitoring and management capabilities, allowing administrators to receive alerts and perform diagnostics over the network. - **External RJ45 Connector:** Standard Ethernet interface for reliable physical network connection, supporting twisted-pair cabling and standard Ethernet infrastructure. - **CompactPCI Bus Interface:** Fully compliant with CompactPCI specifications, ensuring compatibility with a wide range of industrial and embedded computing platforms. - **Transition Board Included:** Supplied with a dedicated transition board for rear I/O applications, simplifying integration into existing CompactPCI backplanes. - **Industrial-Grade Reliability:** Designed for continuous operation in demanding environments, with robust electrical and mechanical characteristics. - **Plug-and-Play Operation:** Supports automatic detection and configuration by the host system, minimizing setup time. - **Low Power Consumption:** Optimized for energy-efficient operation within CompactPCI systems.

Hersteller: Adlink Technology Inc.

Kategorie: cPCI Interface Cards

- **Comprehensive SCSI Compatibility:** Supports SCSI I, SCSI II, Ultra SCSI, and Ultra Wide SCSI protocols, ensuring interoperability with a wide range of SCSI devices and legacy equipment. - **Dual Connector Configuration:** Equipped with an **external 68-pin shielded connector** for Ultra Wide SCSI devices and an **internal 50-pin connector** for standard SCSI peripherals, enabling flexible system integration. - **CompactPCI Form Factor:** Designed for **CompactPCI (cPCI)** systems, providing a rugged, modular, and high-performance interface suitable for industrial and embedded applications. - **Dual Voltage Operation:** Operates with both **3.3V and 5V signaling**, ensuring compatibility with various CompactPCI backplanes and system configurations. - **High Data Throughput:** Supports Ultra Wide SCSI transfer rates up to 40 MB/s, enabling fast and reliable data exchange between host systems and connected devices. - **Industrial-Grade Design:** Built for continuous operation in demanding environments, featuring robust connectors, EMI shielding, and high-quality PCB materials. - **Plug-and-Play Integration:** Fully compliant with CompactPCI specifications, allowing straightforward installation and configuration within standard cPCI chassis. - **Backward Compatibility:** Maintains support for older SCSI standards, ensuring seamless integration with existing infrastructure and legacy peripherals. - **Shielded External Interface:** The 68-pin external connector is shielded to minimize electromagnetic interference (EMI) and maintain signal integrity in electrically noisy environments. - **Flexible Application Range:** Suitable for data acquisition systems, industrial automation, test and measurement setups, and embedded computing platforms requiring SCSI connectivity.

Hersteller: Adlink Technology Inc.

Kategorie: cPCI Interface Cards

- **Comprehensive SCSI Support:** Compatible with SCSI I, SCSI II, Ultra SCSI, and Ultra Wide SCSI protocols, enabling integration with a wide variety of storage and peripheral devices. - **Rear I/O Design:** Incorporates a **transition board** for rear I/O applications, allowing all external connections to be routed through the rear of the chassis for improved cable management and front-panel accessibility. - **Dual Connector Configuration:** Features both an **external 68-pin shielded connector** and an **internal 50-pin connector**, providing flexible connectivity options for different SCSI device configurations. - **Voltage Flexibility:** Supports **3.3V and 5V operation**, ensuring compatibility with diverse CompactPCI backplanes and system power environments. - **High Data Throughput:** Designed to support the full bandwidth of Ultra Wide SCSI, enabling data transfer rates up to 40 MB/s per channel under optimal conditions. - **Industrial-Grade Reliability:** Built for continuous operation in demanding industrial and embedded computing environments, with robust signal integrity and EMI shielding. - **CompactPCI Compliance:** Fully compliant with the **PICMG 2.x CompactPCI** specifications, ensuring interoperability with standard CompactPCI chassis and peripheral modules. - **Transition Board Integration:** The included transition board simplifies rear I/O deployment, reducing installation complexity and improving system maintainability.

Hersteller: Adlink Technology Inc.

Kategorie: cPCI Interface Cards