Produktsuche

- **PCI Express x1 Compliant:** Fully compatible with PCI Express x1 interface, ensuring high‑speed data transfer and broad system compatibility. - **Four RS‑232 Serial Ports:** Provides four independent RS‑232 communication channels via a single DB44 connector. - **High Isolation and Surge Protection:** - 3 kV serial isolation between ports and system bus. - 6 kV surge protection on signal lines (specific to the “‑SI” model). - **Wide Baud Rate Range:** Supports baud rates from 150 bps up to 921.6 Kbps, accommodating a wide range of serial devices. - **128‑Byte FIFO Buffer:** Large FIFO buffer per port for efficient data handling and reduced CPU load. - **Flow Control Support:** Hardware (RTS/CTS) and software (Xon/Xoff) flow control for reliable data transmission. - **Low‑Profile Design:** Compact PCB (67.2 × 136.8 mm) suitable for small‑form‑factor PCs and embedded systems. - **LED Indicators:** - Green LED for TX (transmit activity). - Amber LED for RX (receive activity). - **Industrial‑Grade Protection:** - ESD protection: 15 kV (air), 8 kV (contact). - Surge protection: 6 kV (signal lines, SI model). - Isolation: 3 kV between serial ports and host system. - **Wide Operating Temperature:** ‑40 °C to +75 °C for reliable operation in extreme environments. - **Power Efficiency:** Operates from 3.3 V DC with a typical current draw of 1,150 mA. - **Long‑Term Reliability:** Backed by a 5‑year manufacturer warranty.

Hersteller: Rayon

Kategorie: RS232 4-Ports

- **PCI Express x1 Compliant:** Fully compatible with PCI Express x1 interface, ensuring high‑speed data transfer and broad system compatibility. - **Multi‑Protocol Serial Support:** Provides four independent serial ports configurable for RS‑232, RS‑422, or RS‑485 (2‑wire or 4‑wire) operation. - **High Electrical Protection:** - 3 kV isolation between ports and system bus. - 6 kV surge protection on signal lines (‑SI models). - ESD protection: 15 kV (air) / 8 kV (contact). - **Wide Baud Rate Range:** Supports baud rates from 50 bps to 921.6 kbps, suitable for a wide range of industrial serial devices. - **128‑Byte FIFO Buffer:** Ensures stable and efficient data transmission with minimal CPU load. - **Flow Control Options:** Hardware (RTS/CTS) and software (Xon/Xoff) flow control supported. - **Low‑Profile Form Factor:** Compact 67.2 × 136.8 mm design ideal for small‑form‑factor PCs and embedded systems. - **LED Indicators:** - Green LED for TX (transmit activity). - Amber LED for RX (receive activity). - **Rugged Industrial Design:** Wide operating temperature range (‑40 °C to +75 °C) and humidity tolerance (5 %–95 % non‑condensing). - **Power Efficiency:** Operates on 3.3 V DC, consuming approximately 1,150 mA. - **Comprehensive Certification:** Meets EMC, EMI, and EMS standards for industrial environments. - **Long‑Term Reliability:** Backed by a 5‑year manufacturer warranty.

Hersteller: Rayon

Kategorie: RS232 Mixed RS485 / RS422 4-Ports PCI

- **Four Isolated Serial Ports:** Provides 4 independent RS-422/RS-485 ports for multi-channel serial communication. - **PCI Express Interface:** Fully compliant with PCI Express standards, ensuring high-speed data transfer and compatibility with modern industrial PCs and servers. - **Electrical Isolation:** 3 kV isolation between each port and the host system, protecting equipment and data integrity from ground loops and electrical noise. - **Surge Protection:** Built-in 6 kV surge protection per port, safeguarding against transient voltage spikes and lightning-induced surges. - **ESD Protection:** Advanced ESD protection rated at 15 kV (air discharge) and 8 kV (contact discharge), ensuring reliable operation in static-prone environments. - **Low-Profile Design:** Compact form factor suitable for space-constrained industrial PCs and embedded systems. - **High-Speed Communication:** Supports baud rates up to 921.6 kbps, enabling fast and stable data transmission for demanding applications. - **Large FIFO Buffer:** 128-byte FIFO per port for efficient data handling and reduced CPU load during high-speed communication. - **Single Connector Interface:** Equipped with one DB44 male D-sub connector that breaks out to four serial channels, simplifying cabling and installation. - **Wide Operating Temperature Range:** Designed for extreme environments, operating reliably from -40°C to +75°C. - **Low Power Consumption:** Operates on a single 3.3 V DC power supply from the PCIe bus, minimizing energy usage and heat generation. - **Industrial Reliability:** Built for continuous operation in mission-critical systems, with robust components and industrial-grade design.

Hersteller: Rayon

Kategorie: RS485 / RS422 4-Po

- **High‑speed analog output:** 4 channels, 12‑bit resolution, up to 1 MS/s simultaneous update rate. - **Analog input capability:** 8 single‑ended channels, 14‑bit resolution, up to 400 kS/s sampling rate. - **Fully auto‑calibrating architecture:** Internal 14‑bit calibration DAC with ±2 ppm/°C reference stability. - **Programmable voltage ranges:** Bipolar ±10 V or unipolar 0–10 V, with optional external reference per channel. - **Hardware‑based arbitrary waveform generation:** Onboard 8 k‑sample D/A FIFO buffer for continuous or iterative waveform output. - **Scatter‑gather DMA:** High‑throughput, low‑CPU‑load data transfer for both A/D and D/A operations. - **Digital I/O:** 24 TTL‑compatible programmable lines (Intel 8255 PIO compatible). - **Timer/Counter:** Two 16‑bit general‑purpose up/down counters with 40 MHz internal or up to 10 MHz external clock. - **Triggering:** Software, external digital, external analog, or SSI (System Synchronization Interface) triggers; supports post‑trigger, delay‑trigger, and retrigger modes. - **Synchronization:** Multi‑card synchronization via SSI bus or PXI trigger bus. - **Auto‑calibration:** Internal precision 5 V reference, ±2 ppm/°C, with software‑controlled calibration constants stored in EEPROM. - **Software ecosystem:** Drivers and SDKs for Windows 7/8 x86/x64 and Linux; supports LabVIEW®, MATLAB®, C/C++, Visual Basic, and .NET. - **Utility software:** AD‑Logger for data logging and configuration. - **Plug‑and‑play PCI Express interface:** Automatic resource configuration, no jumpers required. - **Environmental robustness:** 0 °C – 55 °C operating range, 5 – 95 % RH non‑condensing.

Hersteller: Adlink Technology Inc.

Kategorie: D/A Intelligent PCIe

- **High‑speed analog output:** 8 channels, 12‑bit resolution, up to 1 MS/s simultaneous update rate. - **Analog input capability:** 4 single‑ended channels, 14‑bit resolution, up to 400 kS/s sampling rate. - **Dual‑function operation:** Supports both waveform generation and signal acquisition on the same board. - **Auto‑calibration:** Fully automatic internal calibration using a precision 5 V reference (±2 ppm/°C). - **Flexible voltage ranges:** Bipolar ±10 V or unipolar 0–10 V ranges; external reference up to ±10 V per channel. - **Large onboard buffers:** 16 k‑sample D/A FIFO and 2 k‑sample A/D FIFO for continuous streaming. - **Scatter‑gather DMA:** Hardware bus‑mastering DMA for high‑throughput, low‑CPU‑load data transfer. - **Digital I/O:** 24 TTL/CMOS‑compatible programmable lines (Intel 8255 PIO‑compatible). - **Timer/Counter:** Two 16‑bit general‑purpose up/down counters with 40 MHz internal or 10 MHz external clock. - **Triggering:** Software, external digital, external analog, or SSI (System Synchronization Interface) triggers. - **Synchronization:** Multi‑card synchronization via SSI bus or PXI trigger bus. - **Software ecosystem:** Drivers and SDKs for Windows 7/8 x86/x64 and Linux; supports LabVIEW, MATLAB, C/C++, Visual Basic, and Visual Studio .NET. - **Utility software:** AD‑Logger for data logging and visualization. - **Plug‑and‑play PCIe:** Automatic resource configuration, no jumpers required. - **Comprehensive protection:** ±30 V overvoltage protection on analog inputs, short‑circuit protection on outputs. - **Compact design:** 168 × 107 mm PCIe card with 68‑pin VHDCI connector.

Hersteller: Adlink Technology Inc.

Kategorie: D/A Intelligent PCIe

**Digital I/O Capabilities** - 48-channel TTL/DTL-compatible digital I/O lines. - Emulates two industry-standard Intel 8255 Programmable Peripheral Interface (PPI) chips operating in Mode 0. - Buffered circuits for enhanced driving capability and signal integrity. - Direct interface with OPTO-22-compatible I/O modules for industrial-grade isolation and signal conditioning. - Output status read-back capability for verification and monitoring. **Timer/Counter and Interrupt System** - Integrated 8254 programmable timer/counter chip with three 16-bit counters. - 32-bit cascaded timer for watchdog or periodic interrupt generation. - 16-bit event counter for external event counting or frequency measurement. - Programmable interrupt source selection with dual interrupt architecture (INT1 and INT2). - Supports event-triggered and timer-triggered interrupts. **Power and Protection** - Provides +12V and +5V auxiliary power outputs on OPTO-22 connectors. - Resettable fuses protect external devices from overcurrent or short-circuit conditions. - Onboard watchdog timer and event counter for system reliability. **Software and Driver Support** - Comprehensive driver support for Windows and Linux platforms. - Compatible with ADLINK’s PCIS-DASK, PCIS-DASK/X, and PCIS-LVIEW software libraries. - Supports programming in C/C++, Visual Basic, Delphi, and LabVIEW environments. - Includes ActiveX and OPC server support for SCADA and HMI integration. **Plug-and-Play Configuration** - Fully compliant with PCI Express Plug-and-Play specifications. - Automatic resource allocation for I/O addresses and interrupts by system BIOS. - No manual jumper or DIP switch configuration required.

Hersteller: Adlink Technology Inc.

Kategorie: DIO Non-Isolated PCIe

- **High-Density Digital I/O:** 96-channel TTL/DTL-compatible digital input/output lines, organized as four 24-bit ports (A, B, C per connector). - **8255 PPI Emulation:** Emulates four industry-standard Intel 8255 Programmable Peripheral Interface chips operating in Mode 0 configuration. - **Opto-22 Compatibility:** Direct interface with OPTO-22-compatible I/O modules for industrial control and signal isolation. - **Buffered I/O Circuits:** Buffered input/output circuitry ensures higher drive capability and signal integrity. - **Dual Interrupt System:** Supports two simultaneous interrupt sources (INT1 and INT2) with programmable trigger conditions and multiplexed interrupt control. - **Integrated Timer/Counter:** Includes one 8254 programmable timer/counter chip providing: - 32-bit cascaded timer for watchdog or periodic interrupts - 16-bit event counter for external event counting - Programmable interrupt generation - **Power Distribution:** Provides +5V and +12V power outputs on OPTO-22 connectors with resettable fuses for external device protection. - **Plug-and-Play PCI Express Interface:** Fully compliant with PCI Express x1 bus standard; automatic resource allocation (I/O address and IRQ) via BIOS. - **Software Support:** Comprehensive driver and library support for Windows and Linux, including PCIS-DASK, LabVIEW™, MATLAB®, and ActiveX/DAQBench™. - **Industrial-Grade Design:** Operating temperature range 0°C to 60°C, humidity 5–95% non-condensing, suitable for industrial automation environments.

Hersteller: Adlink Technology Inc.

Kategorie: DIO Non-Isolated PCIe

- **High-Speed PCI Express Interface:** PCIe x1 lane interface providing up to 80 MB/s sustained data transfer rate via bus mastering DMA. - **Flexible Channel Configuration:** 32 channels of 5 V TTL-compatible digital I/O, configurable as 16 inputs and 16 outputs, or as 32 inputs or 32 outputs. - **High Throughput:** - Up to 80 MB/s sustained transfer rate (32-bit @ 20 MHz). - Up to 160 MB/s burst rate for digital input using external 40 MHz clock. - **Large Onboard FIFO Buffers:** 64 KB total FIFO memory (32 KB for input, 32 KB for output) for high-speed buffered data transfer. - **Advanced DMA Support:** Bus mastering DMA with scatter-gather capability for efficient, non-contiguous memory transfers and ring-buffer operation. - **Programmable Timing and Triggering:** - Onboard 8254 programmable timer/counter with 10 MHz base clock. - Independent DI_TRG and DO_TRG trigger signals for acquisition and pattern generation. - Internal or external clocking up to 40 MHz. - **Auxiliary I/O:** 4 auxiliary digital inputs and 4 auxiliary digital outputs for control or status signaling. - **Active Termination:** Software-selectable active terminators for reliable high-speed and long-distance data transmission. - **Software and OS Support:** - Windows 7/Vista/XP/2000/2003 Server - Linux (PCIS-DASK/X) - Supported APIs: DAQPilot for LabVIEW™, PCIS-DASK, DAQBench, and AD-Logger. - Programming languages: VB.NET, VC.NET, C/C++, Delphi, Borland C++ Builder. - **Plug and Play Configuration:** Fully compliant with PCI Plug and Play standards; no jumpers or DIP switches required.

Hersteller: Adlink Technology Inc.

Kategorie: DIO Non-Isolated PCIe

- **High-Speed PCI Express Interface:** Utilizes a PCI Express x4 lane interface providing up to 400 MB/s throughput. - **Flexible Channel Configuration:** 32 bi-directional digital I/O channels divided into four 8-bit groups, each configurable as input or output. - **Selectable Logic Levels:** Software-selectable voltage levels of 1.8 V, 2.5 V, or 3.3 V (5 V compatible) for all I/O lines. - **High Clock Rates:** - Internal clock up to 100 MHz - External clock up to 200 MHz (DI mode, 8/16-bit width) - **Phase Shift Control:** 80-step phase shifting (4.5° per step) for precise timing alignment in external clock mode. - **Integrated Serial Interfaces:** Built-in I²C and SPI master interfaces for direct communication with peripheral devices. - **DMA and FIFO Architecture:** Scatter-gather bus-mastering DMA with 8K-sample DI FIFO and 20K-sample DO FIFO ensures continuous high-speed data transfer without CPU overhead. - **Trigger and Handshake Support:** Multiple trigger modes (post, gated, re-trigger) and handshake protocols for synchronized data exchange. - **Auxiliary Function I/O (AFI):** Eight programmable AFI lines supporting static I/O, triggers, handshake, and clock I/O. - **Software Compatibility:** Supports Windows XP/7/8 (x86/x64) and Linux; compatible with LabVIEW®, MATLAB®, and Visual Studio .NET.

Hersteller: Adlink Technology Inc.

Kategorie: DIO Non-Isolated PCIe

- **High‑Speed PCI Express® Interface:** - x1 lane PCI Express® interface delivering up to **200 MB/s** maximum throughput. - Bus‑mastering DMA with scatter‑gather support for efficient, CPU‑independent data transfer. - **Flexible Clocking Architecture:** - Internal clock up to **50 MHz** (programmable divider 100 MHz/N, 2 ≤ N ≤ 65,535). - External clock up to **100 MHz** (supports 8/16‑bit data width). - **16‑step phase shift** (22.5° increments) for precise timing alignment. - **Programmable Logic Levels:** - Software‑selectable logic levels: **1.8 V**, **2.5 V**, or **3.3 V** (5 V compatible). - Uniform logic level applied across all I/O groups. - **Configurable I/O Direction:** - 32 bi‑directional channels divided into four 8‑bit groups (A–D). - Each group independently configurable as input or output. - **Advanced Triggering and Handshaking:** - Supports **software**, **external digital**, **pattern match**, **post/re‑trigger**, and **gated** trigger modes. - Flexible handshaking (DI‑REQ/DI‑ACK, DO‑REQ/DO‑ACK) and burst handshaking for reliable data exchange. - **Auxiliary Function I/O (AFI):** - 8 programmable AFI channels configurable for I²C, SPI, trigger, event, or clock I/O. - I²C master (up to 244 kHz) and SPI master (up to 62.5 MHz) support. - **High‑Speed Data Integrity:** - 8 K‑sample FIFO buffers for both input and output. - Scatter‑gather DMA ensures continuous, loss‑free data streaming. - **Software and OS Support:** - Compatible with Windows 2000/XP/Vista/2003. - Supported programming environments: VB.NET, VC.NET, Delphi, BCB, DAQBench. - Driver package: **PCIS‑DASK** for Windows.

Hersteller: Adlink Technology Inc.

Kategorie: DIO Non-Isolated PCIe

- **Transparent PCIe-to-PXI Bridge:** Provides complete hardware and software transparency; no additional drivers required. - **High-Speed PCI Express® Interface:** Utilizes a PCIe x1 link with a signaling rate up to 2.5 Gbps per direction. - **Extended Distance Capability:** Supports cable lengths up to 7 meters using shielded twisted-pair copper cables. - **Full PXI Compatibility:** Compliant with PXI™ and CompactPCI™ standards, supporting both 5 V and 3.3 V signaling environments. - **32-bit/33 MHz PCI Bus Operation:** Ensures full data throughput for PXI modules. - **Signal Integrity Optimization:** Adjustable equalization, output swing, and de-emphasis controls for long-distance signal transmission. - **Spread Spectrum Clock Control:** Reduces EMI emissions for improved system stability. - **Multiple Cable Options:** Available in 1 m, 3 m, and 7 m lengths (ACL-EXPRESS series). - **Robust Industrial Design:** Suitable for industrial automation, test and measurement, and aerospace applications. - **Plug-and-Play Operation:** Automatically recognized by BIOS as a standard PCI bridge device.

Hersteller: Adlink Technology Inc.

Kategorie: Bus Extensions

- **Transparent PCI Express‑to‑PCI Bridge:** Provides complete hardware and software transparency; no additional drivers or software required. - **Remote PCI Device Control:** Operates up to 7 m away from the host PC using a shielded twisted‑pair copper cable. - **High‑Speed PCI Express x1 Interface:** 2.5 Gbps signaling rate per direction, 250 MB/s throughput. - **Four Available PCI Slots:** 32‑bit/33 MHz PCI bus supporting 5 V and 3.3 V PCI cards. - **Compact Industrial Chassis:** RK‑8005 shoebox‑size chassis (122 × 195 × 259 mm) with integrated 200 W power supply and 80 mm cooling fan. - **Extended Cable Options:** 1 m, 3 m, and 7 m shielded cables (ACL‑EXPRESS‑1/3/7). - **Rugged Design:** Suitable for high‑temperature, shock, and vibration environments. - **Plug‑and‑Play Operation:** Devices in the extension chassis behave as if installed directly in the host system. - **Compliance:** Conforms to PCI Express Base Specification 1.0a, PCI‑to‑PCI Bridge Architecture 1.2, and PCI Local Bus Specification 3.0. - **Applications:** Industrial automation, test and measurement, video capture, aerospace, and high‑density I/O systems.

Hersteller: Adlink Technology Inc.

Kategorie: Bus Extensions

- **PCI Express‑to‑PCI Expansion:** Extends PCI bus functionality from a host PC equipped with a PCI Express slot to a remote chassis containing up to 13 PCI devices. - **Transparent Operation:** Fully hardware‑transparent bridge; no additional drivers or software required. PCI devices in the extension chassis behave as if installed directly in the host system. - **High‑Speed Interface:** PCI Express x1 link supporting 2.5 Gbps per direction (250 MB/s throughput). - **Extended Distance:** Supports remote operation up to 7 meters using shielded twisted‑pair copper cables (ACL‑EXPRESS‑1/3/7). - **Industrial‑Grade Design:** Rugged 19" rack‑mount chassis with dual 120 mm ball‑bearing fans and 400 W auto‑switching power supply. - **Flexible Power Input:** 85 V AC – 265 V AC universal input range with auto‑switching. - **Environmental Resilience:** Designed for operation in 0 °C – 50 °C environments; suitable for high‑vibration or hazardous industrial conditions. - **Remote Power Control:** Optional remote power‑on/off functionality via BP‑8014 backplane and PCI‑8565 JP1/JP2 connectors. - **Compatibility:** Supports both 5 V and 3.3 V PCI buses, 32‑bit/33 MHz operation. - **Applications:** Ideal for industrial automation, test and measurement, military/aerospace systems, video capture, and high‑density I/O environments.

Hersteller: Adlink Technology Inc.

Kategorie: Bus Extensions

- **High‑Speed Opto‑Isolated I/O:** Equipped with high‑speed opto‑couplers providing a maximum input response time of **5 µs** and output response time within **200 µs**, enabling rapid signal acquisition and control in time‑critical industrial applications. - **32 × 32 Channel Configuration:** Provides **32 opto‑isolated digital inputs** and **32 opto‑isolated open‑collector outputs**, each group sharing a common line every 16 channels. This configuration supports flexible wiring and simplified external circuit design. - **Optical Isolation:** Complete galvanic isolation between the PC’s internal logic and external I/O circuits prevents electrical interference, ground loops, and damage from transient voltages. - **Negative Logic / Current Sinking Type:** Both input and output circuits operate on negative logic. Outputs are current‑sinking open‑collector transistors rated at **35 V DC, 50 mA per channel**. - **Interrupt Support:** All 32 input channels can generate interrupts. The 32 interrupt signals are combined into a single interrupt request line (INTA#) for efficient event handling. - **Digital Filtering:** Built‑in digital filter suppresses noise and contact chattering, ensuring stable signal detection in electrically noisy environments. - **Surge and Overcurrent Protection:** Each output transistor includes a Zener diode and polyswitch circuit to protect against voltage surges and overcurrent conditions. - **PCI Express Interface:** Compliant with **PCI Express Base Specification Rev. 1.0a ×1**, ensuring high‑speed data transfer and compatibility with modern PC architectures. - **Software Support:** Includes **Windows** and **Linux** drivers (API‑TOOL / API‑PAC(W32)) and **LabVIEW VI‑DAQ** library for seamless integration into custom applications and test environments. - **RoHS Compliant:** Manufactured in accordance with the EU RoHS directive, ensuring environmentally responsible design.

Hersteller: Contec

Kategorie: DIO Isolated PCIe

- **High-Speed Opto-Isolated TTL I/O:** Provides 16 opto-isolated TTL-level inputs and 16 opto-isolated TTL-level outputs, ensuring electrical isolation between the PC and external devices to prevent noise interference and ground loops. - **On-Board Power Supply:** Integrated 5VDC (600mA) power source for driving input circuit photocouplers, eliminating the need for external power supplies. - **Fast Response Time:** High-speed opto-couplers enable a maximum response time of 1 microsecond, suitable for time-critical control and monitoring applications. - **Interrupt Functionality:** All 16 input channels can be configured as interrupt sources. Interrupt signals are combined into a single interrupt request (INTA) line, triggered on rising or falling edges. - **Digital Filtering:** Built-in digital filter function prevents false triggering due to noise or signal chattering, improving reliability in electrically noisy environments. - **Surge and Overcurrent Protection:** Output transistors include built-in protection circuits (Zener diode and polyswitch) to guard against voltage surges and overcurrent conditions. - **Negative Logic Operation:** Both input and output circuits operate on negative logic, compatible with standard TTL-level control systems. - **Compact PCI Express Form Factor:** Short-length PCIe card (121.69 × 110.18 mm) suitable for installation in compact industrial PCs and embedded systems. - **Software Support:** Includes license-free Windows and Linux drivers (API-TOOL), and LabVIEW VI-DAQ library for seamless integration with data acquisition and control software. - **Compatibility:** Connector pin assignments and functional compatibility with the PCI-compliant board PIO-16/16TB(PCI)H, ensuring easy migration from legacy PCI systems.

Hersteller: Contec

Kategorie: DIO Non-Isolated PCIe

- **High-Speed 12-bit A/D Conversion:** Performs analog-to-digital conversion at a maximum speed of 10 µs per channel (100 kS/s) with 12-bit resolution. - **Flexible Analog Input Configuration:** Supports 16 single-ended or 8 differential analog input channels. Input ranges are selectable as bipolar (±1.25V, ±2.5V, ±5V, ±10V) or unipolar (0–1.25V, 0–2.5V, 0–5V, 0–10V). - **Analog Output Channel:** One 12-bit D/A output channel configurable for ±10V, ±5V, or 0–10V ranges with ±5 mA drive capability. - **Large Onboard Buffer Memory:** 16M data buffer memory configurable as FIFO or RING format for continuous or cyclic data acquisition. - **Digital I/O and Counter:** Four TTL-level digital inputs and four TTL-level digital outputs, plus one 32-bit counter (i8254 equivalent) with internal 4 MHz or external clock source. - **Software-Controlled Sampling:** Sampling start/stop can be triggered by software, external TTL signals, or data comparison conditions. - **Software Calibration:** Full software-based calibration for analog input and output channels, allowing environment-specific adjustment. - **Comprehensive Software Support:** Includes Windows and Linux driver libraries (API-PAC(W32)), C-LOGGER data logger software, and plug-in libraries for MATLAB (ML-DAQ) and LabVIEW (VI-DAQ). - **Expandable Functionality:** Compatible with optional accessories such as isolation amplifiers, simultaneous sampling units, multiplexer sub-boards, and termination panels. - **PCI Express Interface:** Compliant with PCI Express Base Specification Rev. 1.0a (x1 lane).

Hersteller: Contec

Kategorie: A/D High Speed PCIe

- **High-Resolution Analog Conversion:** 16-bit A/D and D/A resolution with a maximum conversion speed of 10 µs per channel (100 kS/s). Provides precise analog signal acquisition and generation for laboratory, industrial, and embedded systems. - **Flexible Analog Input Configuration:** 16 single-ended or 8 differential analog input channels selectable via jumper settings. Input voltage ranges: bipolar ±10V, ±5V or unipolar 0–10V, 0–5V. - **Large Onboard Memory:** 16M data buffer memory configurable as FIFO or RING mode for continuous or cyclic sampling. Enables background data acquisition independent of host CPU load. - **Analog Output Channel:** One 16-bit analog output channel with bipolar ±10V or unipolar 0–10V range, ±5mA drive capability, and ≤1Ω output impedance. - **Digital I/O and Counter:** 4 TTL-level digital inputs and 4 TTL-level digital outputs. Includes one i8254-compatible 32-bit counter with internal 4 MHz or external clock input. - **Software-Controlled Sampling:** Start/stop triggers selectable via software, external TTL signals, or data comparison. Supports internal or external sampling clocks. - **Software Calibration:** Full software-based calibration for analog input/output channels, allowing field adjustment without hardware trimmers. - **Comprehensive Software Support:** Bundled with CONTEC’s **C-LOGGER** data logging software and **API-PAC(W32)** driver library for Windows and Linux. Compatible with MATLAB (ML-DAQ) and LabVIEW (VI-DAQ) via dedicated plug-in libraries. - **PCI Express Interface:** Compliant with PCI Express Base Specification Rev. 1.0a (x1 lane). Provides high-speed data transfer and plug-and-play configuration. - **Extensive Accessory Options:** Supports expansion modules for simultaneous sampling, isolation, amplification, and additional channels.

Hersteller: Contec

Kategorie: A/D High Speed PCIe

- **High‑Speed 12‑bit A/D Conversion:** Performs analog‑to‑digital conversion at 1 µs per channel (1 MS/s) with 12‑bit resolution, suitable for high‑speed data acquisition and waveform capture. - **Flexible Analog Input Configuration:** 16 single‑ended or 8 differential analog input channels selectable via jumper settings. Input ranges include bipolar ±2.5 V, ±5 V, ±10 V or unipolar 0–5 V, 0–10 V. - **Large On‑Board Buffer Memory:** 16 M‑sample memory configurable as FIFO or ring buffer, enabling continuous background sampling independent of host CPU load. - **Analog Output Channel:** One 12‑bit D/A output channel supporting bipolar ±5 V, ±10 V or unipolar 0–10 V ranges, with 6 µs maximum conversion speed and ±5 mA drive capability. - **Digital I/O and Counter:** Four TTL‑level digital inputs and four TTL‑level digital outputs, configurable for counter control. Includes one i8254‑compatible 32‑bit counter with internal 4 MHz or external clock input. - **Trigger and Clock Control:** Sampling start/stop can be controlled by software, external TTL trigger, or input data comparison. Supports internal or external sampling clock sources. - **Comprehensive Software Support:** Bundled with CONTEC’s API‑PAC(W32) driver library for Windows and Linux, C‑LOGGER data logging software, and plug‑in libraries for MATLAB (ML‑DAQ) and LabVIEW (VI‑DAQ). - **Extensive Accessory Ecosystem:** Compatible with a wide range of optional accessories including terminal panels, shielded cables, buffer amplifiers, isolation modules, and multiplexer expansion boards. - **PCI Express Interface:** Compliant with PCI Express Base Specification Rev. 1.0a (x1 lane), ensuring high‑speed data transfer and compatibility with modern PCs. - **Compact and Lightweight:** Board dimensions 169.33 mm (L) × 110.18 mm (H); weight approximately 160 g.

Hersteller: Contec

Kategorie: A/D High Speed PCIe

- **High‑Speed, High‑Resolution A/D Conversion:** 16‑bit resolution with a maximum conversion speed of 1 µs per channel, enabling precise and rapid analog signal acquisition. - **Flexible Analog Input Configuration:** 16 single‑ended or 8 differential input channels selectable via jumper settings. Input ranges include bipolar ±10 V/±5 V or unipolar 0–10 V/0–5 V. - **Analog Output Capability:** One 16‑bit D/A output channel supporting bipolar ±10 V or unipolar 0–10 V ranges, with 10 µs maximum conversion speed. - **Integrated Digital I/O and Counter:** Four TTL‑level digital inputs and four TTL‑level digital outputs, with one 32‑bit counter (i8254‑equivalent) supporting internal 4 MHz or external clock operation. - **Large On‑Board Memory:** 16 M‑sample buffer memory configurable as FIFO or ring buffer for continuous or cyclic data acquisition independent of host CPU load. - **Software‑Controlled Sampling:** Sampling start/stop can be triggered by software, external TTL signals, or data comparison events. Internal or external clocks selectable. - **Software Calibration:** Full analog input/output calibration can be performed via software, allowing environmental adjustment without hardware modification. - **Comprehensive Software Support:** Bundled with CONTEC’s **C‑LOGGER** data logger software and **API‑PAC(W32)** driver libraries for Windows and Linux. Compatible with MATLAB (ML‑DAQ) and LabVIEW (VI‑DAQ) through dedicated plug‑ins. - **Extensive Accessory Ecosystem:** Optional accessories include buffer amplifiers, isolation modules, simultaneous sampling units, multiplexers, and termination panels for flexible system expansion. - **PCI Express Interface:** Compliant with PCI Express Base Specification Rev. 1.0a ×1, ensuring high‑speed data transfer and compatibility with modern PCs.

Hersteller: Contec

Kategorie: A/D High Speed PCIe

- **Multi‑Function Integration:** Combines analog input (AI), analog output (AO), digital input/output (DI/DO), and counter functions on a single PCIe card, minimizing slot usage. - **High‑Resolution Analog I/O:** 16‑bit resolution for both input and output channels, supporting bipolar and unipolar voltage ranges up to ±10 V or 0–10 V. - **High‑Speed Sampling:** Analog input conversion speed up to 2 µs per channel (500 kS/s aggregate rate). Analog output conversion speed up to 10 µs per channel. - **Event Controller:** Hardware‑based event controller enables precise synchronization between analog, digital, and counter operations without software latency. Supports external triggers, clock synchronization, and inter‑board coordination. - **Bus Master DMA Transfer:** High‑speed data transfer directly between board and system memory without CPU load. Supports simultaneous analog and digital data streaming. - **Independent Buffer Memory:** 64 k‑word FIFO or RING buffer for both AI and AO, enabling background operation independent of host software. - **Software Calibration:** Full software‑based calibration for analog input/output channels; user calibration data can be stored in addition to factory calibration. - **Synchronization Across Boards:** Up to 16 boards can be synchronized via dedicated SC connectors for simultaneous sampling and control. - **Digital Filtering:** Built‑in digital filters on digital inputs, counter inputs, and external control signals to suppress noise and chattering. - **Comprehensive Software Support:** Includes Windows and Linux drivers, C‑LOGGER data logging software, and libraries for MATLAB (ML‑DAQ) and LabVIEW (VI‑DAQ). - **Wide Environmental Tolerance:** Operating temperature 0–50 °C, humidity 10–90 % RH (non‑condensing).

Hersteller: Contec

Kategorie: A/D High Speed PCIe

- **Integrated PoE P.S.E. Functionality:** Provides three 10/100/1000Base‑T(X) PoE ports compliant with IEEE 802.3at/af standards, delivering up to **30 W per port** and a **total power budget of 65 W**. - **Flexible Fiber Connectivity:** Includes one 100/1000Base‑X SFP port with onboard DIP‑switch for speed selection (ON: 100Base‑FX, OFF: 1000Base‑X). - **PCIe Interface Compatibility:** Supports **PCIe x1** bus interface, compliant with **PCIe Rev. 1.1**, and compatible with **x4, x8, and x16** slots for flexible installation across various IPC motherboards. - **Bus‑Powered Operation:** The switch card itself is powered via the PCIe bus (~4.2 W typical without PoE load), while PoE power is sourced from the **12 VDC ATX line** of the host system. - **High‑Performance Switching:** Supports **store‑and‑forward** switching architecture, **auto‑negotiation**, **auto‑MDI/MDI‑X**, and **10 K jumbo frame** transmission for optimized throughput and reduced latency. - **Robust Industrial Design:** Designed for harsh environments with an **operating temperature range of −10 °C to +60 °C**, **storage temperature −40 °C to +85 °C**, and **humidity tolerance of 5 %–95 % non‑condensing**. - **Comprehensive OS Support:** Compatible with a wide range of operating systems including **Windows (DOS to Win 8)**, **Linux (Kernel 2.4.x–3.x)**, **FreeBSD**, **SCO Unix**, **Novell**, and **Mac OS 10.4–10.7**. - **Industrial‑Grade Reliability:** Certified for **EMI/EMS compliance**, **shock**, **vibration**, and **free‑fall** resistance per IEC and EN standards. - **Long‑Term Support:** Backed by a **5‑year warranty** and ORing’s industrial networking support infrastructure.

Hersteller: Oring

Kategorie: Switch Card

- **Four‑Port Gigabit Switch Architecture:** Provides **3× 10/100/1000Base‑T(X)** RJ‑45 ports and **1× 100/1000Base‑X SFP** port for mixed copper and fiber connectivity. - **PCIe Interface Compatibility:** Supports **PCIe x1** bus interface and is **upward compatible** with **x4, x8, and x16** slots. Fully compliant with **PCIe Revision 1.1**. - **Flexible SFP Configuration:** A **DIP‑switch (S1)** allows selection between **100Base‑FX** and **1000Base‑X** operation for the SFP port (ON = 100Base‑FX, OFF = 1000Base‑X). - **High‑Performance Switching:** - **Store‑and‑forward** switching architecture - **8K MAC address table** - **Auto‑negotiation** and **auto‑MDI/MDI‑X** support - **Flow control** compliant with IEEE 802.3x - **Jumbo Frame Support:** Handles Ethernet frames up to **10,000 bytes**, improving throughput for large data transfers. - **Bus‑Powered Operation:** Draws power directly from the PCIe bus (~4.2 W typical), eliminating the need for external power supplies. - **Industrial‑Grade Design:** Designed for rugged environments with **‑10°C to 60°C** operating temperature, **5–95% non‑condensing humidity**, and compliance with **IEC shock, vibration, and free‑fall** standards. - **Cross‑Platform Driver Support:** Compatible with **Windows, Linux, Unix, Novell, and MacOS** operating systems. - **Long‑Term Reliability:** Backed by a **5‑year warranty** and ORing’s industrial quality assurance.

Hersteller: Oring

Kategorie: Switch Card

- **Four Gigabit Ethernet Ports:** Equipped with **4×10/100/1000Base-T(X)** RJ45 ports supporting auto MDI/MDI-X and auto-negotiation for flexible network integration. - **PCI Express Interface:** Supports **PCIe x1** bus interface and is fully compatible with **x4, x8, and x16 PCIe slots**, ensuring broad motherboard compatibility. - **High-Speed Data Throughput:** Provides full-duplex 1000 Mbps bandwidth through the PCIe bus architecture, enabling high-performance LAN communication. - **Unmanaged Operation:** Plug-and-play functionality with no configuration required, ideal for systems requiring simple, reliable Ethernet expansion. - **Fast Redundant Ethernet Ring:** Supports redundant Ethernet ring topology with **recovery time

Hersteller: Oring

Kategorie: Switch Card

- **4×10/100/1000Base‑T(X) PoE (P.S.E.) Ports:** Each RJ‑45 port supports Gigabit Ethernet speeds and IEEE 802.3af PoE power delivery up to **15.4 W per port**. - **IEEE Standards Compliance:** - IEEE 802.3 (10Base‑T) - IEEE 802.3u (100Base‑TX) - IEEE 802.3ab (1000Base‑T) - IEEE 802.3x (Flow Control) - IEEE 802.3af (Power over Ethernet) - **PCIe Interface:** Supports **PCIe x1** bus and is compatible with **x4, x8, and x16** slots. Fully compliant with **PCIe Rev. 1.1**. - **PoE Power Source:** Draws PoE power from **12 V DC ATX power input**. - **Auto‑Detection & Classification:** Each LAN port automatically detects PoE or non‑PoE devices and adjusts accordingly. - **Jumbo Frame Support:** Handles Ethernet frames up to **10 KB**, improving throughput for large data transfers. - **Store‑and‑Forward Switching:** Ensures reliable data transmission with error checking. - **Auto‑Negotiation & Auto‑MDI/MDI‑X:** Simplifies network setup by automatically configuring link speed and cable type. - **Overload Current Protection:** Built‑in protection for safe PoE operation. - **Fast Redundant Ethernet Ring:** Recovery time less than **10 ms** across up to **250 units**, ensuring high network availability. - **Alarm Relay Output:** One configurable relay output for system alarms or fault notifications. - **Industrial‑Grade Design:** Extended operating temperature range, ESD and surge protection, and robust mechanical construction.

Hersteller: Oring

Kategorie: Switch Card

- **High-Density Digital I/O:** 64 optically isolated digital input channels, 64 optically isolated digital output channels, and 32 programmable TTL I/O channels. - **Optical Isolation:** 1,250 VRMS isolation between channels and system bus, ensuring protection against high-voltage transients and ground loops. - **Change of State (COS) Detection:** Programmable COS interrupt function for all digital input channels, enabling event-driven response to input state changes. - **Watchdog Timer (WDT):** 32-bit hardware watchdog timer with programmable overflow interval (100 ns to 429.496 s) for system safety monitoring. - **Digital Output Readback:** Real-time readback of output states to verify actual output conditions. - **Programmable Power-Up and Safety States:** Configurable power-up DO initial states and safety DO states for predictable startup and fault conditions. - **Hot Reset Hold Function:** Retains digital output states during system hot resets to prevent unintended output transitions. - **Board ID Function:** Hardware DIP switch for unique board identification in multi-card systems. - **High Output Drive Capability:** Each isolated output channel can sink up to 250 mA (300 mA max) at 60°C continuous duty. - **Wide Input Voltage Range:** Accepts 0–28 VDC input signals, with non-polarity input design for flexible wiring. - **Software Support:** Compatible with ADLINK’s PCIS-DASK driver library, LabVIEW® DAQ-LVIEW PnP, and DAQBench™ ActiveX controls. - **Universal PCI/PCIe Interface:** 32-bit, 3.3/5 V PCI or PCIe bus interface with plug-and-play configuration.

Hersteller: Adlink Technology Inc.

Kategorie: DIO Isolated PCIe