- **Multi-Protocol Serial Interface:** Supports RS-232, RS-422, and RS-485 (2-wire or 4-wire) communication modes via a DB9 male connector. - **Ethernet Connectivity:** 1 x 10/100Base-T(X) RJ-45 port with auto-negotiation and auto MDI/MDI-X support. - **High-Speed Serial Communication:** Baud rates from 110 bps up to 460.8 Kbps. - **Redundant Power Inputs:** Dual 12–48 VDC inputs via terminal block and DC jack for uninterrupted operation. - **Industrial-Grade Reliability:** Metal IP30 enclosure, ESD protection up to 15 kV, and magnetic isolation of 1.5 kV on Ethernet port. - **Fast Recovery Ethernet Redundancy:** Recovery time

Manufacturer: Sunix

Category: Industrial Device Server

- **Dual Ethernet Redundancy:** Two 10/100Base‑T(X) RJ‑45 ports with automatic failover and recovery time under 10 ms ensure continuous network connectivity. - **Multi‑Protocol Support:** Operates in Virtual COM, TCP Server, TCP Client, UDP, and Serial Tunnel modes for flexible integration. - **High Security:** Supports HTTPS, SSL, SSH, and advanced wireless security standards (WEP/WPA/WPA2/802.1X/Radius/TKIP) for encrypted management and data transfer. - **Event Notification System:** Real‑time alerts via Syslog, E‑mail, SNMP Trap, Relay output, and Beeper for proactive fault management. - **NAT Pass‑Through:** Enables remote management through NAT routers, simplifying deployment across segmented networks. - **Multiple Host Connections:** Supports up to five simultaneous connections (Virtual COM, TCP Server/Client, UDP) for data redundancy and multi‑host access. - **Redundant Power Inputs:** Dual 12–48 V DC inputs via terminal block and DC jack for power reliability. - **Industrial‑Grade Design:** Metal IP30 enclosure, DIN‑rail or wall‑mount installation, and wide operating temperature range (‑10 °C to 60 °C). - **Comprehensive Software Tools:** IDS‑Tools Windows utility for device discovery, configuration, firmware updates, and monitoring. - **Cross‑Platform Drivers:** Virtual COM driver for Windows NT/2000/XP/2003/Vista and fixed TTY driver for Linux systems. - **Compact Form Factor:** 72 × 31 × 125 mm (W × D × H) for space‑constrained industrial panels.

Manufacturer: Sunix

Category: Industrial Device Server

- **Multi‑Port Serial Connectivity:** Four independent serial ports configurable as RS‑232, RS‑422, or RS‑485 (2‑wire or 4‑wire). Each port can operate in a different mode simultaneously. - **Dual Ethernet Redundancy:** Two 10/100Base‑T(X) RJ‑45 ports with automatic recovery time under 10 ms ensure continuous communication in case of link failure. Supports redundant and switch (daisy‑chain) modes. - **High Security and Management:** Secure management via HTTPS and SSH; supports SSL, SSH, WEP/WPA/WPA2, 802.1X, Radius, and TKIP encryption. Configurable through Web console, SSH console, or the Windows‑based IDS‑Tools utility. - **Versatile Operation Modes:** Virtual COM, TCP Server, TCP Client, UDP, and Serial Tunnel modes. Up to five simultaneous connections per port for multi‑host access. - **Event and Alarm Notification:** System events can trigger Syslog, E‑mail, SNMP trap, relay output, or beeper alerts. Fault LED indicator provided on the front panel. - **Redundant Power Inputs:** Dual 12–48 V DC inputs via 6‑pin terminal block with reverse polarity protection. Maximum power consumption 7 W. - **Industrial‑Grade Design:** Rugged IP30 metal enclosure, 15 kV ESD protection on serial lines, 1.5 kV magnetic isolation on Ethernet ports, and optional 2 kV serial isolation on specific variants. - **Software Utility – IDS‑Tools:** Comprehensive Windows utility for device discovery, configuration, firmware updates, monitoring, and group management. Supports Windows NT/2000/XP/2003/Vista and Linux (TTY driver). - **Flexible Installation:** Supplied with DIN‑rail and wall‑mount kits for versatile deployment in control cabinets or industrial panels. - **Reliability and Longevity:** MTBF ≥ 200,000 hours, 5‑year manufacturer warranty.

Manufacturer: Sunix

Category: Industrial Device Server

- **Multi‑Protocol Serial Connectivity:** Supports four independent serial ports configurable as RS‑232, RS‑422, or 2/4‑wire RS‑485. - **Dual Ethernet Ports with Redundancy:** Two 10/100Base‑TX RJ‑45 ports provide network redundancy or daisy‑chain switch mode with recovery time under 10 ms. - **PoE PD Functionality:** IEEE 802.3af‑compliant Power Device (PD) on Ethernet Port 2 (ETH2) allows power delivery via network cable, eliminating the need for a separate power adapter. - **High Security:** HTTPS, SSL, SSH, WEP/WPA/WPA2, 802.1X, Radius, and TKIP encryption ensure secure data transmission and management. - **Flexible Operation Modes:** Virtual COM, TCP Server, TCP Client, UDP, and Serial Tunnel modes for versatile integration with existing systems. - **Advanced Event Notification:** Supports Syslog, E‑mail, SNMP trap, relay output, and beeper alerts for system events and fault conditions. - **Redundant Power Inputs:** Dual 12–48 V DC inputs on a 6‑pin removable terminal block with reverse polarity protection. - **Industrial‑Grade Design:** Rugged IP30 metal enclosure, DIN‑rail or wall‑mount installation, and wide operating temperature range (‑10 °C to 55 °C). - **Comprehensive Software Suite:** IDS‑Tools utility for Windows enables device discovery, configuration, firmware updates, and monitoring. - **Cross‑Platform Drivers:** Virtual COM drivers for Windows NT/2000/XP/2003/Vista and fixed TTY drivers for Linux. - **High Reliability:** MTBF ≥ 200,000 hours, 15 kV ESD protection, and 1.5 kV magnetic isolation on Ethernet ports. - **Simultaneous Multi‑Host Access:** Up to five concurrent connections per serial port for Virtual COM, TCP Server, or TCP Client modes.

Manufacturer: Sunix

Category: Industrial Device Server

- **Multi-Interface Serial Connectivity:** Supports RS-232, RS-422, and RS-485 communication standards through a single DB9 male connector, enabling flexible integration with diverse serial equipment. - **Dual Network Interfaces:** Includes one 10/100Base-T(X) RJ45 port with auto MDI/MDIX and one 100Base-FX multi-mode fiber port (SC connector, 1310 nm wavelength, 2 km range). - **Industrial-Grade Reliability:** IP-30 metal enclosure, wide operating temperature range (-40°C to +70°C), and redundant 12–48 VDC power inputs ensure continuous operation in harsh conditions. - **Advanced Network Protocol Support:** Compatible with ICMP, IP, TCP, UDP, DHCP, BOOTP, SSH, DNS, SNMP v1/v2c, HTTPS, and SMTP for secure and flexible network communication. - **Comprehensive Operating Modes:** Supports Virtual COM, Serial Tunnel, TCP Server, TCP Client, UDP, and Modbus Gateway modes for versatile deployment. - **Event Notification System:** Provides event warnings via Syslog, Email, SNMP Trap, relay output, or audible beeper for proactive system monitoring. - **Web-Based and Utility Configuration:** Configurable through a web interface or Windows-based DS-Tool utility; supports OpenWRT SDK for custom project development. - **High-Speed Serial Communication:** Supports baud rates from 110 bps up to 460.8 Kbps with multiple data, parity, and stop bit configurations. - **Ethernet Redundancy:** Network recovery time of less than 10 ms ensures minimal downtime in redundant Ethernet topologies. - **Comprehensive LED Indicators:** Provides visual status for power, Ethernet link/activity, fiber link/activity, and serial TX/RX activity.

Manufacturer: Oring

Category: Industrial Device Server

- **Multi-Interface Serial Connectivity:** Supports RS-232, RS-422, and RS-485 communication standards through a single DB9 male connector, enabling flexible integration with a wide range of industrial equipment. - **Dual Network Interfaces:** Includes one 10/100Base-T(X) RJ45 port (auto MDI/MDIX) and one 100Base-FX multi-mode fiber port (ST connector) for extended communication distances up to 2 km. - **High Reliability and Redundancy:** Dual 12–48 VDC power inputs on a 4-pin terminal block ensure continuous operation even if one power source fails. Ethernet redundancy with recovery time under 10 ms enhances network resilience. - **Secure and Manageable:** Supports secure management protocols such as HTTPS, SSH, and SNMP v1/v2c. Event notifications can be sent via Syslog, Email, SNMP Trap, relay output, or audible beeper. - **Flexible Operating Modes:** Operates in multiple modes including Virtual COM, Serial Tunnel, TCP Server, TCP Client, UDP, and Modbus Gateway, allowing seamless integration into diverse network architectures. - **Comprehensive Configuration Tools:** Configurable via a web-based interface or ORing’s Windows utility (DS-Tool). Supports OpenWRT SDK for custom project development. - **Industrial-Grade Design:** IP-30 metal enclosure, DIN-rail or wall-mount installation, and wide operating temperature range (-40°C to +70°C) make it suitable for demanding industrial environments. - **LED Indicators:** Provides clear visual feedback for power, Ethernet link/activity, fiber link/activity, and serial TX/RX status. - **Long-Term Reliability:** Backed by a 5-year manufacturer warranty and compliance with international EMC, safety, and environmental standards.

Manufacturer: Oring

Category: Industrial Device Server

- **Multi-Interface Serial Connectivity:** Supports RS-232, RS-422, and RS-485 communication standards via a single DB9 male connector. - **Dual Network Interfaces:** - 1 × 10/100Base-T(X) RJ45 port with auto MDI/MDIX. - 1 × 100Base-FX single-mode fiber port (SC connector) for up to 30 km transmission distance. - **High Reliability and Redundancy:** - Dual 12–48 VDC power inputs on a 4-pin terminal block. - Ethernet redundancy with recovery time

Manufacturer: Oring

Category: Industrial Device Server

- **Multi-Protocol Serial-to-Ethernet Conversion:** Supports RS-232, RS-422, and RS-485 interfaces through a single DB9 connector, enabling flexible integration with diverse serial equipment. - **Dual Network Interfaces:** One 10/100Base-T(X) RJ45 port (auto MDI/MDIX) and one 100Base-FX single-mode fiber port (ST connector) for extended communication up to 30 km. - **High-Speed Serial Communication:** Configurable baud rates from 110 bps to 460.8 Kbps with support for 7 or 8 data bits, multiple parity options, and 1, 1.5, or 2 stop bits. - **Multiple Operating Modes:** Virtual COM, Serial Tunnel, TCP Server, TCP Client, UDP, and Modbus Gateway modes for flexible deployment in various network architectures. - **Advanced Event Warning System:** Real-time alerts via Syslog, Email, SNMP Trap, relay output, or beeper for proactive fault management. - **Redundant Power Inputs:** Dual 12–48 VDC inputs on a 4-pin terminal block ensure uninterrupted operation during power source failure. - **Rugged Industrial Design:** IP30-rated metal enclosure, wide operating temperature range (-40°C to +70°C), and vibration/shock resistance for harsh environments. - **Fast Ethernet Redundancy:** Network recovery time under 10 ms ensures minimal downtime in redundant Ethernet topologies. - **Comprehensive Configuration Tools:** Web-based management interface and Windows utility (DS-Tool) for easy setup and monitoring. - **OpenWRT SDK Support:** Enables custom firmware development and integration into specialized industrial systems. - **Extensive OS Compatibility:** Supports Windows NT, 2000, XP, 2003, Vista (32/64-bit), and Windows 7 (32/64-bit).

Manufacturer: Oring

Category: Industrial Device Server

- **Redundant Ethernet Connectivity:** Two 10/100Base‑T(X) ports with auto MDI/MDI‑X support ensure network redundancy and fast recovery (

Manufacturer: Oring

Category: Industrial Device Server

- **Multi‑Protocol Serial‑to‑Ethernet Conversion:** Supports RS‑232, RS‑422, and RS‑485 interfaces through a DB9 male connector, enabling flexible integration with a wide range of serial devices. - **Dual Ethernet Ports with Redundancy:** Two 10/100Base‑T(X) RJ‑45 ports with auto MDI/MDI‑X support provide Ethernet redundancy and recovery time under 10 ms, ensuring continuous operation. - **PoE PD Functionality:** One Ethernet port (ETH1) supports IEEE 802.3af PoE PD input, allowing the device to be powered directly via Ethernet cabling—ideal for installations where power outlets are limited. - **Advanced Security:** Integrated HTTPS, SSH, and SSL encryption, IP access control, and IP whitelist functions safeguard data integrity and prevent unauthorized access. - **Flexible Operation Modes:** Supports Virtual COM, Serial Tunnel, TCP Server, TCP Client, and UDP modes. Up to five simultaneous host connections are supported for redundancy and data sharing. - **Comprehensive Event Notification:** System events can trigger alerts via Syslog, SNMP trap, email, relay output, or beeper, ensuring proactive monitoring and maintenance. - **Industrial‑Grade Design:** Rugged IP‑30 metal enclosure, DIN‑rail and wall‑mount options, and wide operating temperature range (‑40 °C to 70 °C) make it suitable for demanding industrial environments. - **Redundant Power Inputs:** Dual 12–48 VDC power inputs on a 6‑pin terminal block provide power redundancy and protection against power failure. - **Software Management Tools:** Includes DS‑Tool Windows utility for device discovery, configuration, firmware updates, and monitoring. Web‑based, Telnet, SSH, and SNMP management interfaces are also supported. - **High Compatibility:** Compatible with Windows NT/2000/XP/2003/Vista/7 (32/64‑bit) and Linux (fixed TTY driver available).

Manufacturer: Oring

Category: Industrial Device Server

- **Multi‑protocol Serial‑to‑Ethernet Conversion:** Supports RS‑232, RS‑422, and RS‑485 interfaces through a DB9 connector, enabling flexible integration with diverse serial equipment. - **Dual Ethernet Ports:** Two 10/100Base‑T(X) RJ‑45 ports with auto MDI/MDI‑X for network redundancy and fast recovery (

Manufacturer: Oring

Category: Industrial Device Server

- **Dual Serial and Ethernet Interfaces:** Two RS‑232/422/485 serial ports and two 10/100Base‑T(X) Ethernet ports with auto MDI/MDI‑X support. - **High Security Communication:** Supports HTTPS, SSH, and SSL encryption for secure data transmission. IP access control and IP whitelist functions enhance network security. - **Versatile Operation Modes:** Supports Virtual COM, Serial Tunnel, TCP Server, TCP Client, and UDP modes. Enables flexible integration with various industrial and automation systems. - **Redundant Ethernet and Power Inputs:** Dual Ethernet ports support network redundancy with recovery time

Manufacturer: Oring

Category: Industrial Device Server

- **Dual Serial‑to‑Ethernet Conversion:** Two independent RS‑232/422/485 serial ports for flexible integration with legacy serial devices. - **Dual 10/100Base‑T(X) Ethernet Ports:** Two RJ‑45 ports with auto MDI/MDI‑X support; one port supports IEEE 802.3af PoE PD input. - **Redundant Power Inputs:** Dual 12–48 VDC power inputs on a 6‑pin terminal block for uninterrupted operation. - **High Reliability:** Ethernet redundancy and recovery time

Manufacturer: Oring

Category: Industrial Device Server

- **Multi‑port Serial‑to‑Ethernet Conversion:** Four independent RS‑232/422/485 serial ports with DB9 connectors enable simultaneous communication with multiple serial devices. - **Dual Ethernet Interfaces:** Two 10/100Base‑T(X) RJ‑45 ports with auto MDI/MDI‑X support provide network redundancy and fast recovery (

Manufacturer: Oring

Category: Industrial Device Server

- **Multi‑port Serial Connectivity:** Four DB9 serial ports supporting RS‑232, RS‑422, and RS‑485 (2‑wire/4‑wire) modes. - **Dual Ethernet Interfaces:** Two 10/100Base‑T(X) RJ‑45 ports with auto MDI/MDI‑X; one port supports IEEE 802.3af PoE PD. - **Redundant Power Inputs:** Dual 12–48 VDC inputs on a 6‑pin terminal block for high availability. - **High Security:** Supports HTTPS, SSH, and SSL encryption, IP access control, and IP whitelist for secure data transmission. - **Flexible Operation Modes:** Virtual COM, Serial Tunnel, TCP Server, TCP Client, and UDP modes for versatile integration. - **Event Notification:** System events can trigger Syslog, SNMP trap, email alerts, relay output, or audible beeper. - **Fast Ethernet Redundancy:** Network recovery time

Manufacturer: Oring

Category: Industrial Device Server

- **Multi‑Protocol Serial‑to‑Ethernet Conversion:** Supports RS‑232, RS‑422, and RS‑485 interfaces across four DB9 ports, allowing flexible integration of diverse serial devices. - **Dual Gigabit Ethernet Ports:** Two 10/100/1000Base‑T(X) RJ‑45 ports with auto MDI/MDIX for high‑speed network connectivity and redundancy. - **Versatile Operating Modes:** Virtual COM, Serial Tunnel, TCP Server, TCP Client, UDP, and Modbus Gateway (Modbus TCP/RTU/ASCII). - **Redundant Host Support:** Up to five simultaneous host connections in Virtual COM, TCP Server, or TCP Client modes; four IP ranges in UDP mode. - **Advanced Security:** SSL data encryption, HTTPS and SSH management, IP access control, and IP whitelist for secure communication. - **Event Notification System:** Real‑time alerts via Syslog, SNMP trap, relay output, and audible beeper. - **Management Tools:** Configurable through a web‑based interface, SSH console, or ORing’s Windows utility **DS‑Tool** for centralized configuration, monitoring, and firmware updates. - **Industrial‑Grade Design:** IP‑30 metal enclosure, wide operating temperature range (‑40 °C to 70 °C), and redundant 12–48 VDC power inputs ensure continuous operation in demanding environments. - **Fast Ethernet Recovery:** Ethernet redundancy and recovery time under 10 ms for mission‑critical applications. - **Comprehensive OS Support:** Compatible with Windows NT/2000/XP/2003/Vista/7 (32/64‑bit) and Linux (via fixed TTY driver).

Manufacturer: Oring

Category: Industrial Device Server

- **Multi‑protocol Serial‑to‑Ethernet Conversion:** Supports RS‑232, RS‑422, and RS‑485 (2‑wire/4‑wire) interfaces for flexible integration with legacy serial equipment. - **Dual Gigabit Ethernet Ports:** Two 10/100/1000Base‑T(X) RJ‑45 ports with auto MDI/MDI‑X; ETH2 port supports IEEE 802.3af PoE PD with 1 kV isolation. - **Redundant Ethernet and Power Design:** Dual DC power inputs (12–48 VDC) and dual LAN interfaces ensure continuous operation with recovery time

Manufacturer: Oring

Category: Industrial Device Server

- **Multi‑Interface Serial Connectivity:** One DB9 serial port supporting RS‑232, RS‑422, and RS‑485 (2‑wire/4‑wire) modes with baud rates from 110 bps to 460.8 Kbps. - **Dual Ethernet Ports:** Two 10/100Base‑T(X) RJ‑45 ports with auto MDI/MDI‑X detection. IDS‑4312+ includes one PoE PD port (IEEE 802.3af compliant). - **Wireless LAN Support:** Integrated 802.11b/g/n WLAN client interface with external reverse SMA antenna connector. Supports DSSS/OFDM modulation, up to 150 Mbps throughput, and WPA/WPA2/802.1X security. - **Versatile Operation Modes:** Supports Virtual COM, Serial Tunnel, TCP Server, TCP Client, and UDP modes for flexible serial‑to‑Ethernet/WLAN communication. - **Advanced Security:** HTTPS, SSH, and SSL encryption; IP access control; IP whitelist; and NAT pass‑through for secure remote management. - **Event Notification System:** Configurable alerts via Syslog, SNMP trap, or email for system events such as power resets, IP changes, or serial port status changes. - **Redundant Power Inputs:** Dual 12–48 VDC inputs with reverse polarity and overload protection ensure uninterrupted operation. - **Industrial‑Grade Design:** IP30 metal enclosure, DIN‑rail and wall‑mount options, wide operating temperature range (‑40 to 70 °C), and vibration/shock resistance per IEC60068 standards. - **Management Interfaces:** Configurable via Web GUI, Windows DS‑Tool utility, Telnet, or SSH console. Supports firmware upgrades and configuration backup/restore. - **High Reliability Networking:** Ethernet redundancy with recovery time

Manufacturer: Oring

Category: Industrial Device Server

- **Multi‑Interface Connectivity:** One RS‑232/422/485 serial port and two 10/100Base‑T(X) Ethernet ports (one PoE PD‑enabled). Supports WLAN 802.11b/g/n for wireless networking. - **PoE PD Functionality:** IEEE 802.3af‑compliant Power Device input interface with overload and short‑circuit protection. Ideal for installations where separate power cabling is difficult. - **High‑Security Communication:** Supports HTTPS, SSH, and SSL encryption for secure data transmission. IP access control, IP whitelist, and NAT pass‑through supported. - **Versatile Operation Modes:** Virtual COM, Serial Tunnel, TCP Server, TCP Client, and UDP modes. Supports up to five simultaneous host connections for redundancy. - **Advanced Event Notification:** Event warnings via Syslog, Email, SNMP trap, and audible beeper. Configurable system event triggers for hardware reset, login failure, IP change, etc. - **Comprehensive Management Options:** Configurable via Web interface, Windows DS‑Tool utility, Telnet, or SSH console. Supports firmware upgrade, configuration backup/restore, and SNMP management. - **Industrial‑Grade Design:** IP30 metal enclosure, DIN‑rail and wall‑mount options, redundant 12–48 VDC power inputs. Operating temperature from ‑40 °C to +70 °C, humidity 5–95% non‑condensing. - **Ethernet Redundancy:** Dual LAN ports support Ethernet redundancy with recovery time

Manufacturer: Oring

Category: Industrial Device Server

- **1‑Port Serial‑to‑Ethernet Conversion:** Converts one RS‑232 serial interface to one 10/100Base‑T(X) Ethernet port. - **Versatile Operation Modes:** Supports Virtual COM, Serial Tunnel, TCP Server, TCP Client, and UDP modes for flexible integration with various network architectures. - **Secure Communication:** Implements HTTPS, SSH, and SSL encryption for secure management and data transfer. - **Redundant Host Support:** Simultaneous data transmission to up to five host PCs ensures communication continuity in case of network or host failure. - **Network Management & Monitoring:** Configurable via web browser, SSH console, or Windows utility (DS‑Tool). Supports SNMP v1/v2c for network monitoring. - **Event Notification System:** Alerts via Syslog, Email, SNMP Trap, or Beeper for critical events such as power changes, link loss, or unauthorized access. - **NAT Router Pass‑Through & DDNS:** Enables remote management through NAT routers and dynamic IP environments using PPPoE and DDNS. - **Redundant Power Inputs:** Dual 12–48 VDC inputs via terminal block and DC power jack ensure uninterrupted operation. - **Industrial‑Grade Design:** IP‑30 metal enclosure, wide operating temperature range (‑40 °C to 70 °C), and DIN‑rail or wall‑mount installation options. - **Fast Recovery & Reliability:** Ethernet redundancy with recovery time

Manufacturer: Oring

Category: Industrial Device Server

- **Dual Network Interfaces:** One 10/100Base-T(X) Ethernet port and one IEEE 802.11b/g WLAN interface for flexible wired or wireless connectivity. - **High-Speed Wireless Connectivity:** WLAN interface supports up to **54 Mbps** link speed with IEEE 802.11b/g dual-mode operation. - **Advanced Security:** Supports **WEP (64/128-bit), WPA, WPA2, TKIP, AES encryption**, and **802.1X/RADIUS authentication** for secure wireless communication. - **Multiple Host Redundancy:** Allows **simultaneous data transfer to up to 5 host PCs** in Virtual COM, TCP Server, TCP Client, or UDP modes, ensuring data redundancy and reliability. - **NAT Pass-Through:** Enables management and communication through NAT routers, allowing remote access across different IP domains. - **Dual Redundant Power Inputs:** Accepts **12–48 VDC** via both a **DC power jack** and a **3-pin terminal block**, ensuring uninterrupted operation in case of power source failure. - **Secure Management Interfaces:** Supports **HTTPS**, **SSH**, and **DS-Tool** for configuration and monitoring, providing encrypted management sessions. - **Event Notification System:** Alerts via **Syslog, Email, SNMP Trap, and Beeper** for proactive fault detection and system monitoring. - **Versatile Operation Modes:** Supports **Virtual COM, Serial Tunnel, TCP Server, TCP Client, and UDP** communication modes. - **Industrial-Grade Design:** Rugged **IP-30 metal housing**, **DIN-rail** and **wall-mount** installation options, and wide operating temperature range for harsh environments. - **Comprehensive Software Utility:** Includes **DS-Tool** for Windows (NT/2000/XP/2003/Vista) for device discovery, configuration, firmware updates, and monitoring.

Manufacturer: Oring

Category: Industrial Device Server

- **1-Port Serial to Fiber Conversion:** Converts RS-232/422/485 serial communication to 100Base-FX Ethernet over multi-mode fiber. - **Multi-Mode Fiber Interface:** SC connector, 1310 nm wavelength, supports 50/125 µm or 62.5/125 µm fiber, up to 2 km distance. - **Versatile Serial Modes:** Supports RS-232, RS-422, and 2/4-wire RS-485, configurable via DS-Tool or web interface. - **Multiple Operation Modes:** Virtual COM, Serial Tunnel, TCP Server, TCP Client, and UDP modes for flexible integration. - **Redundant Host Connections:** Supports up to **5 simultaneous host connections** for data redundancy and reliability. - **Secure Management:** HTTPS, SSH, and SSL encryption ensure secure configuration and data transmission. - **NAT Pass-Through:** Enables remote management through NAT routers, supporting DDNS and PPPoE for Internet-based access. - **Event Notification System:** Alerts via Syslog, Email, SNMP Trap, and Beeper for system and network events. - **Dual Redundant Power Inputs:** 12–48 VDC via terminal block and power jack for uninterrupted operation. - **Industrial-Grade Design:** IP-30 metal enclosure, DIN-rail and wall-mount options, wide operating temperature range (-40°C to 70°C). - **Software Utility:** DS-Tool for Windows provides device discovery, configuration, monitoring, and firmware updates. - **High Reliability:** MTBF > 561,000 hours, 5-year warranty.

Manufacturer: Oring

Category: Industrial Device Server

- **1-Port Serial to 1-Port Fiber Ethernet Conversion:** Supports RS-232, RS-422, and 2/4-wire RS-485 interfaces via a DB9 male connector, converting serial data to 100Base-FX single-mode fiber Ethernet. - **High Security:** HTTPS, SSH, and SSL encryption ensure secure data transmission and management. - **Redundant Host Support:** Simultaneous data transfer to up to five host PCs in Virtual COM, TCP Server, TCP Client, or UDP modes for enhanced reliability. - **Dual Redundant Power Inputs:** Accepts 12–48 VDC via both a terminal block and a DC power jack, ensuring uninterrupted operation. - **NAT Pass-Through:** Enables remote management through NAT routers, supporting DDNS and PPPoE for flexible deployment across IP domains. - **Event Notification System:** Alerts via Syslog, Email, SNMP trap, relay, or beeper for system events and faults. - **Industrial-Grade Design:** IP-30 metal enclosure, DIN-rail and wall-mount options, and wide operating temperature range (-40°C to 70°C). - **Fast Ethernet Redundancy:** Ethernet recovery time under 10 ms for high-availability networks. - **Comprehensive Management Tools:** Configurable via web browser, SSH console, or Windows utility (DS-Tool). - **Fixed TTY Driver for Linux:** Ensures compatibility with Linux-based systems. - **Wide OS Support:** Compatible with Windows NT, 2000, XP, 2003, and Vista (32-bit).

Manufacturer: Oring

Category: Industrial Device Server

- **Dual Redundant Ethernet Ports:** Two 10/100Base‑T(X) RJ‑45 interfaces supporting redundant mode with automatic failover and recovery time under 10 ms. - **Switch Mode (Daisy Chain):** Enables Ethernet daisy‑chaining to reduce switch port usage and simplify network topology. - **Serial‑to‑Ethernet Conversion:** One RS‑232/422/485 port configurable via DS‑Tool for flexible serial communication. - **Multiple Host Redundancy:** Supports up to five simultaneous host connections in Virtual COM, TCP Server, TCP Client, or UDP modes. - **Secure Management:** HTTPS and SSH protocols for encrypted configuration and monitoring. - **Event Notification:** Alerts via Syslog, Email, SNMP Trap, and audible beeper; relay output available for external alarms. - **NAT Pass‑Through:** Allows management and communication through NAT routers, enabling remote access across IP domains. - **Dual Power Inputs:** Redundant 12–48 V DC inputs via 3‑pin terminal block and DC power jack with reverse polarity protection. - **Software Utility (DS‑Tool):** Windows‑based management suite for device discovery, configuration, firmware updates, and monitoring. - **High Reliability:** Hardware and software redundancy mechanisms ensure continuous operation in case of network or power failure. - **Industrial Design:** IP‑30 metal housing, DIN‑rail and wall‑mount options, and extended operating temperature range. - **Security Functions:** IP access control table, password protection, SSL data encryption, and SSH console access. - **Comprehensive Protocol Support:** ICMP, IP, TCP, UDP, DHCP, BOOTP, ARP/RARP, DNS, SNMP MIB‑II, HTTPS, SSH. - **Wide OS Compatibility:** Virtual COM drivers for Windows NT/2000/XP/2003/Vista (32‑bit).

Manufacturer: Oring

Category: Industrial Device Server

- **Dual Redundant Ethernet Ports:** Two 10/100Base‑T(X) RJ‑45 interfaces supporting redundant or switch (daisy‑chain) mode with

Manufacturer: Oring

Category: Industrial Device Server