- **12-Slot CompactPCI Backplane:** Provides one system slot and twelve I/O slots, enabling extensive peripheral expansion and modular system design. - **32-bit PCI Bus Architecture:** Compliant with the CompactPCI 32-bit standard, ensuring compatibility with a wide range of cPCI boards and modules. - **Right-Hand System Slot Configuration:** The system slot is positioned on the right-hand side, ideal for chassis designs that require right-oriented controller placement. - **47-Pin Power Connectors:** Equipped with three 47-pin power sockets for stable and redundant power input, supporting high-current industrial applications. - **Rear I/O Support:** Designed with rear I/O connectivity to facilitate clean cable management and improved accessibility in rackmount or enclosure-based systems. - **High Signal Integrity Design:** Optimized PCB layout and controlled impedance traces ensure reliable data transmission across all slots. - **Scalable and Modular:** Supports multiple peripheral boards for data acquisition, communication, control, and processing tasks. - **Industrial-Grade Reliability:** Built with high-quality materials and connectors to withstand continuous operation in harsh environments. - **ADLINK Quality Assurance:** Manufactured under strict quality control standards, ensuring long-term stability and compatibility with ADLINK system components.

Manufacturer: Adlink Technology Inc.

Category: cPCI Backplanes

- **8-Slot CompactPCI Configuration:** Supports up to eight CompactPCI peripheral boards, including one system slot and seven peripheral slots, allowing flexible system expansion and modular design. - **64-Bit Data Bus:** Provides a full 64-bit PCI bus interface for high-bandwidth data transfer, ensuring compatibility with 32-bit and 64-bit CompactPCI cards. - **10-Layer PCB Design:** Multi-layer printed circuit board enhances signal integrity, reduces crosstalk, and ensures stable power and ground distribution across all slots. - **High-Speed PCI Signaling:** Compliant with PCI specifications for 33 MHz and 66 MHz operation, supporting high-performance data communication between system and peripheral boards. - **Industrial-Grade Reliability:** Designed for continuous operation in industrial and embedded environments, with robust mechanical construction and high-quality connectors. - **Scalable System Architecture:** Enables flexible system configurations for control, data acquisition, and communication applications. - **Optimized Power Distribution:** Integrated power planes and decoupling capacitors ensure stable voltage delivery to all slots, minimizing noise and voltage drops. - **Backplane Management Support:** Provides system management signals and clock distribution for synchronized operation of all connected modules. - **Compatibility:** Fully compliant with PICMG 2.0 CompactPCI specifications, ensuring interoperability with a wide range of CompactPCI boards and chassis.

Manufacturer: Adlink Technology Inc.

Category: cPCI Backplanes

- **8-Slot CompactPCI Configuration:** Supports up to eight cPCI slots, enabling flexible system expansion and modular design. - **64-Bit Bus Architecture:** Provides high data throughput and compatibility with 64-bit CompactPCI cards, ensuring optimal performance for data-intensive applications. - **3U Form Factor:** Compact 3U height suitable for space-constrained industrial and embedded systems. - **Rear I/O Support:** Designed with rear I/O capability for improved cable management and system integration flexibility. - **DIN 41612 31-Pin Power Socket:** Standardized power interface ensuring reliable power delivery and compatibility with industrial-grade power supplies. - **10-Layer PCB Design:** Multi-layer printed circuit board enhances signal integrity, reduces crosstalk, and supports high-speed data transmission. - **High Reliability and Durability:** Engineered for continuous operation in industrial environments with extended temperature and vibration tolerance. - **Scalable System Integration:** Supports a range of CompactPCI CPU and peripheral boards, allowing system designers to tailor configurations for specific applications. - **Optimized Signal Routing:** Controlled impedance traces and ground planes ensure stable signal performance across all slots. - **Compliance with CompactPCI Standards:** Fully compliant with PICMG 2.0 specifications for interoperability and long-term support.

Manufacturer: Adlink Technology Inc.

Category: cPCI Backplanes

rear removable bridge card, Adlink

Manufacturer: Adlink Technology Inc.

Category: cPCI Backplanes

- **CompactPCI to PCI Expansion:** Provides seamless connectivity between a CompactPCI host system and up to four standard PCI peripheral cards. - **Integrated Intel 21152 Bridge:** Utilizes the Intel 21152 PCI-to-PCI bridge controller for reliable data transfer, bus arbitration, and transparent communication between the CompactPCI and PCI buses. - **Four PCI Slots:** Offers four independent PCI expansion slots, allowing multiple PCI cards to be installed and operated simultaneously. - **Plug and Play Operation:** Fully plug-and-play compliant, automatically recognized by Windows operating systems without the need for manual driver installation. - **Auto Voltage Adaptation:** Supports automatic voltage detection and adaptation for both 3.3 V and 5 V PCI cards, ensuring broad compatibility with a wide range of PCI devices. - **Mechanical Format:** Designed in a 3U CompactPCI form factor with a front panel width of 28 HP, suitable for integration into standard CompactPCI chassis. - **Compact Dimensions:** Physical dimensions of 128.7 mm × 136.9 mm, optimized for space-constrained industrial or embedded systems. - **Windows Integration:** Native support under Windows environments; no additional software or configuration utilities required. - **Industrial-Grade Design:** Engineered for reliability and long-term operation in industrial, laboratory, and embedded computing applications.

Manufacturer: No category

Category: cPCI Backplanes

- **CompactPCI PICMG 2.11 Compliant:** Fully adheres to the 31‑pin CompactPCI power interface standard, ensuring interoperability with compliant power modules such as ADLINK’s cPS‑150R 175 W PSU. - **Single Power Supply Support:** Designed for one 3U plug‑in power supply unit, ideal for non‑redundant CompactPCI systems. - **Integrated AC Input Terminals:** Provides screw‑type terminals for direct connection of AC line, neutral, and chassis ground. - **ATX‑Style DC Output Connector:** Includes a 20‑pin ATX‑compatible DC output interface for distribution of +3.3 V, +5 V, +12 V, and −12 V rails to the system backplane or peripheral modules. - **Signal Management:** Supports standard power management signals such as INH# (inhibit), FAL# (fail), DEG# (derate), and sense lines for voltage feedback (+5 V sense, +5 V sense+). - **Current Sharing Interface:** Provides ISH connector for +5 V current sharing when multiple backplanes are used in parallel configurations. - **Compact 3U Form Factor:** Optimized for 3U CompactPCI chassis integration, occupying minimal slot width while maintaining full electrical compliance. - **Industrial‑Grade Construction:** Built with high‑quality PCB materials and screw‑terminal interfaces for robust mechanical and electrical reliability. - **Ease of Integration:** Designed for direct installation into ADLINK cPCIS‑1000/2000 series chassis or equivalent CompactPCI enclosures.

Manufacturer: Adlink Technology Inc.

Category: cPCI Power Supplies

- **Redundant Power Architecture:** Supports two 3U 31‑pin CompactPCI redundant power supply units (cPS‑150R), enabling hot‑swappable, load‑sharing, and fail‑safe operation. - **PICMG 2.11 Compliance:** Fully compliant with the CompactPCI Power Interface Specification (31‑pin variant), ensuring interoperability with standard CompactPCI power modules. - **Dual ATX‑Style DC Output Connectors:** Provides two ATX‑compatible 20‑pin DC output connectors for system power distribution. - **External AC Input Terminals:** Equipped with screw terminals for direct AC line and neutral input connections. - **Compact 3U Form Factor:** Fits standard 3U CompactPCI chassis, occupying a 4‑slot width (approximately 81 mm). - **High Reliability Design:** Engineered for industrial environments with robust PCB construction and secure terminal interfaces. - **Signal Integration:** Includes standard control and monitoring signals such as INH# (inhibit), FAL# (fail), and DEG# (derate) for system‑level power management. - **Ease of Integration:** Designed to mate directly with ADLINK’s cPS‑150R power modules and compatible CompactPCI chassis (e.g., cPCIS‑2000A, cPCIS‑1000). - **Scalable System Support:** Can be used in single or dual redundant configurations, supporting both standalone and integrated CompactPCI sub‑systems.

Manufacturer: Adlink Technology Inc.

Category: cPCI Power Supplies

- **Dual Redundant Power Support:** Accommodates two 3U CompactPCI 31‑pin redundant power supply units for high‑availability operation. - **PICMG 2.11 Compliance:** Fully compliant with the 31‑pin CompactPCI power interface standard, ensuring interoperability with standard CompactPCI power modules such as ADLINK’s cPS‑150R. - **Redundant Power Architecture:** Enables hot‑swappable redundant PSU configuration, allowing continuous system operation during power module replacement or failure. - **Multiple Power Output Interfaces:** Equipped with two ATX‑style DC output connectors for flexible power distribution to system backplanes or peripheral modules. - **External AC Input Terminals:** Provides screw‑type terminals for secure connection of external AC power sources. - **Compact 3U Form Factor:** Designed for integration into 3U CompactPCI chassis, occupying a 4‑slot width (approximately 81 mm). - **High Reliability and Industrial Design:** Built with industrial‑grade PCB materials and connectors for long‑term durability in harsh environments. - **Ease of Integration:** Compatible with ADLINK’s cPCIS‑1000 and cPCIS‑2000 chassis and sub‑systems, simplifying system assembly and maintenance.

Manufacturer: Adlink Technology Inc.

Category: cPCI Power Supplies

- **CompactPCI PICMG 2.11 Compliance:** Fully compliant with the CompactPCI power interface standard, ensuring interoperability with standard 47-pin redundant or single PSUs. - **Single 47-pin Power Socket:** Supports one CompactPCI 47-pin power supply unit, typically from the cPS-175 series (AC/DC input). - **Integrated ATX Connector:** Includes one ATX-style DC power output connector for system-level power distribution. - **Optimized for 3U Systems:** Designed for 3U CompactPCI chassis such as the cPCIS-1000 and cPCIS-2000 series. - **High Reliability PCB Design:** Industrial-grade PCB with precise impedance control and robust copper traces for stable current handling. - **Compact Dimensions:** 40.64 mm × 128.7 mm, optimized for 3U height and 4-slot width integration. - **Flexible Power Distribution:** Provides +5V, +3.3V, +12V, and −12V rails with sense and control signals for accurate voltage regulation. - **Signal Management:** Includes INH# (inhibit), FAL# (fail), DEG# (derate), and sense lines for intelligent power management and monitoring. - **Compatibility:** Designed to operate with ADLINK’s cPS-175/AC, cPS-175/48, and cPS-175/24 power supply units. - **Industrial Durability:** Built for continuous operation in industrial environments with high reliability and long service life.

Manufacturer: Adlink Technology Inc.

Category: cPCI Power Supplies

- **Dual Redundant Power Support:** Accommodates two 3U redundant 47-pin CompactPCI power supply units for high-availability applications. - **PICMG 2.11 Compliance:** Fully compliant with the CompactPCI Power Interface Specification, ensuring interoperability with standard CompactPCI power modules. - **High Reliability Design:** Engineered for industrial environments requiring continuous operation and fault-tolerant power delivery. - **ATX-Compatible Output Connectors:** Provides two ATX-like DC output connectors for easy integration with standard CompactPCI backplanes or system boards. - **External AC Input Terminals:** Equipped with screw terminals for direct AC input connection, simplifying installation and maintenance. - **Current Sharing Capability:** Supports current sharing between redundant power supplies for balanced load distribution and improved reliability. - **Compact 3U Form Factor:** Optimized for 3U CompactPCI chassis, occupying only 4-slot width (81 mm) while maintaining full functionality. - **Integrated Power Management Signals:** Includes INH# (inhibit), FAL# (fail), DEG# (derate), and sense lines for intelligent power control and monitoring. - **Industrial-Grade Construction:** Built with high-quality PCB materials and connectors for long-term durability in demanding environments. - **Compatibility:** Designed for use with ADLINK cPS-175 series power supplies and cPCIS-2000/1000 CompactPCI platforms.

Manufacturer: Adlink Technology Inc.

Category: cPCI Power Supplies

- **Triple 47-pin Power Interface:** Supports up to three CompactPCI 47-pin power supply units, enabling redundant or load-sharing configurations for high-availability systems. - **PICMG 2.11 Compliance:** Fully compliant with the CompactPCI Power Interface Specification, ensuring interoperability with standard CompactPCI power modules such as ADLINK’s cPS-175 series. - **High-Density Power Distribution:** Provides multiple regulated voltage rails (+5V, +3.3V, +12V, -12V) with sense and share lines for precise voltage regulation and current balancing. - **Multiple Power Input Options:** Equipped with three ATX-style connectors for flexible DC power input and integration with standard ATX or CompactPCI power supplies. - **Compact 3U Form Factor:** Designed for 3U CompactPCI chassis, with dimensions optimized for integration into ADLINK’s cPCIS-1000/2000 platforms. - **Industrial-Grade Design:** Manufactured using high-quality PCB materials for durability, signal integrity, and thermal stability in demanding environments. - **Redundant Power Management:** Supports hot-swappable redundant power supplies, enabling continuous operation during maintenance or PSU replacement. - **Comprehensive Signal Support:** Includes inhibit (INH#), fail (FAL#), derate (DEG#), and sense lines for intelligent power management and system monitoring. - **Ease of Integration:** Compatible with ADLINK’s cPS-175/AC, cPS-175/48, and cPS-175/24 power modules, as well as third-party PICMG 2.11-compliant units. - **CompactPCI System Compatibility:** Designed for use with ADLINK’s cPCIS-2000 and cPCIS-1000 chassis, supporting both single and dual system configurations.

Manufacturer: Adlink Technology Inc.

Category: cPCI Power Supplies

- **Redundant Quad 47‑pin Power Interface:** Supports up to four 47‑pin CompactPCI power supply modules for redundancy and load sharing, ensuring uninterrupted system operation. - **Multiple Power Input Options:** Equipped with four ATX‑type connectors for flexible DC power input configurations. - **CompactPCI 3U Form Factor:** Conforms to the 3U CompactPCI mechanical standard, allowing seamless integration into ADLINK’s cPCIS‑1000/2000 chassis. - **High Reliability Design:** Built with industrial‑grade PCB materials and connectors for continuous operation in demanding environments. - **Redundant Power Management:** Supports hot‑swappable redundant PSUs compliant with PICMG 2.11, enabling fault‑tolerant power delivery. - **Optimized Layout:** Compact 161.56 mm × 128.7 mm board size for efficient space utilization within 3U chassis. - **Compatibility:** Designed for use with ADLINK cPS‑175/AC, cPS‑175/48, cPS‑175/24, and other 47‑pin redundant power supplies. - **Integrated Signal Management:** Provides standard control signals such as INH#, DEG#, and FAL# for power inhibit, derating, and fault indication. - **Industrial‑Grade Connectors:** Utilizes Positronic PCIH47F300A1/PCI47F300A1 connectors for secure, high‑current power transmission. - **Ease of Maintenance:** Modular design allows quick replacement of power modules without system downtime.

Manufacturer: Adlink Technology Inc.

Category: cPCI Power Supplies

- **Redundant Hot‑Swappable Design:** Enables uninterrupted system operation during PSU replacement or failure. - **Universal AC Input:** Accepts 90 – 264 VAC, 45 – 440 Hz single‑phase input, supporting global deployment. - **High Power Density:** 175 W maximum output in a compact 3U form factor. - **Multiple DC Outputs:** Provides +5 V, +3.3 V, +12 V, and −12 V regulated outputs. - **Parallel Current Sharing:** Supports load sharing within ±10 % on +5 V output when multiple units operate in parallel. - **Comprehensive Protection:** Over‑current, over‑voltage, under‑voltage, short‑circuit, surge, and over‑temperature protection with automatic recovery. - **Status Indicators:** Front‑panel LEDs for “Power OK” (green) and “Fail” (red) status. - **High Efficiency and Power Factor:** Typical efficiency 73 %, power factor 0.99. - **Wide Frequency Range:** Operates from 45 Hz to 440 Hz, suitable for both commercial and military power systems. - **Industrial Reliability:** MTBF ≥ 50,000 hours (MIL‑HDBK‑217E), MTTR ≈ 5 minutes. - **Standards Compliance:** Meets UL 1950, CSA C22.2 No. 950, EN 60950/TÜV, CE, FCC Class A, and VDE Class A requirements. - **Environmental Robustness:** Operates 0 – 70 °C (full power to 40 °C with 15 CFM airflow), storage −40 – 85 °C, 95 % RH non‑condensing. - **CompactPCI Integration:** Fully compliant with PICMG 2.11 power interface standard using 31‑pin DIN 41612 connector.

Manufacturer: Adlink Technology Inc.

Category: cPCI Power Supplies

- **CompactPCI 3U Form Factor:** Fully compliant with PICMG 2.11 power interface standards for 3U/6U CompactPCI systems. - **Redundant Hot‑Swappable Design:** Enables parallel operation of multiple units for load sharing and fault tolerance. - **DC Input Operation:** Accepts 18 – 36 V DC input voltage, ideal for telecom, transportation, and mobile industrial systems. - **High Output Power:** Delivers up to 175 W total output with multiple regulated voltage rails (+5 V, +3.3 V, +12 V, −12 V). - **Current Sharing:** Supports active current sharing on +5 V and +3.3 V outputs within ±10 % for redundant configurations. - **Comprehensive Protection:** Over‑voltage, over‑current, under‑voltage, surge, and thermal shutdown protection with automatic recovery. - **Status Indicators:** Front‑panel LEDs for “Power OK” (green) and “Fault” (red) status indication. - **High Efficiency:** Typical conversion efficiency of 73 %. - **Safety and EMC Compliance:** Meets UL, TUV/VDE EN60950, CE, and FCC Class A standards. - **Rugged Industrial Reliability:** MTBF of 100,000 hours (MIL‑HDBK‑217E) and designed for continuous 24/7 operation. - **Operating Temperature Range:** 0 °C – 70 °C (full power up to 40 °C with 15 CFM forced air). - **Compact and Lightweight:** 3U module, approximately 0.85 kg, suitable for high‑density rack systems.

Manufacturer: Adlink Technology Inc.

Category: cPCI Power Supplies

- **CompactPCI 3U Redundant Design:** Fully compliant with PICMG 2.11 power interface standards, enabling seamless integration into CompactPCI backplanes. - **Hot‑Swappable Operation:** Supports live insertion and removal without system shutdown, ensuring continuous uptime in redundant configurations. - **Wide DC Input Range:** Accepts 36 – 72 V DC input (nominal 48 V DC), suitable for telecom and industrial DC power environments. - **High Output Power:** Delivers up to 175 W total output across multiple voltage rails (+5 V, +3.3 V, +12 V, −12 V). - **Parallel Operation and Load Sharing:** Supports current sharing on +5 V and +3.3 V outputs within ±10 % for redundant or load‑balanced systems. - **Comprehensive Protection:** Over‑voltage, over‑current, under‑voltage, short‑circuit, and over‑temperature protection with automatic recovery. - **Status Indicators:** Front‑panel LEDs for **POWER (green)** and **FAULT (red)** provide immediate visual status of input and fault conditions. - **High Efficiency and Reliability:** Typical efficiency of 73 %; MTBF of 100,000 hours (MIL‑HDBK‑217E). - **Safety and EMC Compliance:** Meets UL, TUV/VDE EN60950, CE, and FCC Class A standards. - **Compact Form Factor:** 3U height, 40 mm width, 172.8 mm depth; lightweight (≈ 0.85 kg). - **Plug‑and‑Play Compatibility:** Designed for use with ADLINK cBP‑3062 redundant backplane or other PICMG 2.11‑compliant 47‑pin backplanes.

Manufacturer: Adlink Technology Inc.

Category: cPCI Power Supplies

- **Universal AC Input:** Accepts 85 – 265 VAC, 45 – 440 Hz, enabling global operation without manual voltage selection. - **CompactPCI 3U Form Factor:** Fully compliant with PICMG 2.11 power interface specifications using a 47‑pin Positronic connector. - **Redundant Hot‑Swappable Design:** Supports parallel operation and current sharing for +5 V and +3.3 V rails, ensuring uninterrupted system power. - **High Reliability:** MTBF of 100,000 hours (MIL‑HDBK‑217E, part‑count method). - **Comprehensive Protection:** Over‑voltage, over‑current, under‑voltage, surge, and thermal protection with automatic recovery. - **Status Indicators:** Front‑panel LEDs for “Power OK” (green) and “Fault” (red) conditions. - **High Efficiency:** Typical conversion efficiency of 73 %. - **Safety and EMC Compliance:** Certified to UL, TUV/VDE EN60950, CE EMI EN55022 Class A, and EMS EN50082‑2 standards. - **Environmental Robustness:** Operates from 0 °C to 70 °C with forced‑air cooling; storage –10 °C to +85 °C; up to 6,400 m altitude. - **Compact and Lightweight:** 40 mm (W) × 128.5 mm (H) × 172.8 mm (D); weight ≈ 0.85 kg. - **Plug‑and‑Play Integration:** Designed for ADLINK cPCIS‑1000/2000 series chassis and compatible backplanes (e.g., cBP‑3062).

Manufacturer: Adlink Technology Inc.

Category: cPCI Power Supplies

- **PICMG® 2.11 Compliance:** Fully compliant with the CompactPCI® Power Interface standard, ensuring interoperability with standard CompactPCI® backplanes and chassis. - **3U CompactPCI® 8HP Form Factor:** Compact 100 x 160 mm board size, occupying two slots (8HP width) in a 3U chassis. - **47-pin Power Connector:** Standardized interface for DC input and DC output connections, supporting hot-swap operation. - **250 W DC Output Power:** Provides stable and efficient power delivery for CompactPCI® systems. - **Active Power Factor Correction (PFC):** Meets IEC1000-3-2 harmonic correction requirements, achieving a typical power factor of 0.95–0.97. - **Hot-Swappable Design:** Enables replacement or maintenance without system shutdown, minimizing downtime. - **N+1 Redundancy Support:** Internal OR-ing diodes allow multiple units to operate in parallel for fault-tolerant power configurations. - **Active Current Sharing:** Ensures balanced load distribution among redundant modules. - **Comprehensive Protection:** Includes over-temperature, over-current, over-load, and over-voltage protection on all output rails. - **Status Indicators:** Dual LED indicators (green for power, amber for fault) provide immediate visual status feedback. - **Remote Control and Monitoring:** Supports remote ON/OFF control, power failure (FAL#), and degradation (DEG#) signals for system-level management. - **EMI Compliance:** Meets EN 55022 and FCC Class A emission standards. - **Wide Operating Temperature Range:** -40 °C to +70 °C at full load with airflow, suitable for harsh industrial environments. - **High Efficiency:** Typical efficiency of 78–79%, optimizing thermal performance and energy utilization.

Manufacturer: Adlink Technology Inc.

Category: cPCI Power Supplies

- **PICMG® 2.11 Compliance:** Fully compliant with the CompactPCI® Power Interface standard, ensuring interoperability with standard CompactPCI® backplanes and systems. - **3U CompactPCI® 8HP Form Factor:** Compact 100 x 160 mm, 2-slot (8HP) wide design suitable for 3U CompactPCI® chassis. - **Wide DC Input Range:** Operates from 36 to 72 VDC, optimized for 48 VDC nominal systems. - **High Output Power:** Provides up to 250 W continuous output power across multiple voltage rails. - **Hot-Swap Redundancy:** Supports hot-swappable operation and N+1 redundancy through internal OR-ing diodes, enabling continuous uptime during maintenance or module replacement. - **Active Current Sharing:** Ensures balanced load distribution among multiple power modules in redundant configurations. - **Comprehensive Protection:** Includes over-temperature, over-current, over-load, and over-voltage protection on all outputs. - **Status Indicators:** Front-panel LEDs indicate power and fault conditions for quick diagnostics. - **Remote Control & Monitoring:** Supports remote ON/OFF control, power failure signal (FAL#), and power degradation signal (DEG#) for system-level management. - **High Efficiency:** Typical efficiency of 78–79%, minimizing heat generation and improving energy utilization. - **EMI & Safety Compliance:** Meets EN 55022 and FCC Class A EMI standards, and certified to IEC950 and IEC60950 Class I safety standards. - **Rugged Environmental Design:** Operates from -40°C to +70°C with appropriate airflow, suitable for industrial and telecom environments.

Manufacturer: Adlink Technology Inc.

Category: cPCI Power Supplies

- **Wide Input Range:** Operates from 16.6VDC to 160VDC, supporting nominal voltages of 24V, 48V, 72V, and 110VDC, ideal for railway and industrial environments. - **High Output Power:** Provides up to 120W under fanless convection cooling and up to 300W with forced-air cooling (400 LFM or higher). - **CompactPCI® Compliance:** Fully compliant with PICMG® 2.11 CompactPCI® Power Interface specifications, ensuring interoperability with standard CompactPCI® backplanes and systems. - **Redundant Operation:** Supports N+1 redundancy with internal OR-ing diodes on all outputs, enabling hot-swap replacement and uninterrupted system operation. - **Hot-Swap Capability:** Designed for live insertion and removal without system shutdown, minimizing downtime in critical applications. - **Railway-Grade Reliability:** Certified to EN 50155 Class S2 and C2 for power stability and environmental resilience in railway systems. - **Wide Operating Temperature:** Operates from -40°C to +85°C with appropriate cooling, ensuring reliable performance in harsh environments. - **Comprehensive Protection:** Includes over-temperature, over-current, over-load, and over-voltage protection on all output rails. - **Status Indicators:** Equipped with front-panel LEDs for power (green) and fault (red) indication. - **Remote Control & Monitoring:** Provides remote ON/OFF control, power failure (FAL#), and power degradation (DEG#) signals for system integration and monitoring. - **High Efficiency:** Typical efficiency of 85% at 24VDC input (120W) and up to 89% at 110VDC input (300W). - **Conformal Coating Option:** Available with conformal coating for enhanced protection against humidity, dust, and corrosive environments.

Manufacturer: Adlink Technology Inc.

Category: cPCI Power Supplies

- **PICMG® 2.11 Compliance:** Fully compliant with the CompactPCI® Power Interface standard, ensuring interoperability with standard CompactPCI® backplanes and chassis. - **3U 8HP Form Factor:** Compact 3U height (100 × 160 mm) and 8HP width (two slots), suitable for high‑density rackmount systems. - **Universal AC Input:** Accepts 90–264 VAC input voltage range at 47–63 Hz, supporting global operation without manual voltage selection. - **Active Power Factor Correction (PFC):** Achieves a typical power factor of 0.95–0.97, meeting IEC1000‑3‑2 harmonic correction standards for improved efficiency and reduced input current distortion. - **Hot‑Swappable Design:** Enables replacement or maintenance without system shutdown, supporting continuous system uptime. - **N+1 Redundancy:** Internal OR‑ing diodes allow multiple units to operate in parallel for fault‑tolerant power configurations. - **Active Current Sharing:** Balances load current among parallel modules to enhance reliability and extend service life. - **Comprehensive Protection:** Includes over‑temperature, over‑current, over‑load, and over‑voltage protection on all output rails. - **Status Indicators:** Dual LED indicators—green for power status and amber for fault indication—provide immediate visual feedback. - **Remote Control & Monitoring:** Supports remote ON/OFF control, power failure (FAL#), and degradation (DEG#) signals for system management integration. - **High Efficiency:** Typical conversion efficiency of 78–79%, minimizing heat generation and power loss. - **Low Ripple & Noise:** 50 mV ripple on 5 V and 3.3 V outputs; 120 mV on ±12 V outputs, ensuring clean power for sensitive electronics. - **Environmental Robustness:** Operates from ‑40 °C to +70 °C with appropriate airflow, suitable for harsh industrial environments. - **EMI/EMC Compliance:** Meets EN 55022 and FCC Class A emission standards.

Manufacturer: Adlink Technology Inc.

Category: cPCI Power Supplies

- **Universal AC Input Range:** 85 – 265 VAC, 45 – 440 Hz, supporting global operation without manual voltage selection. - **Output Power:** 150 W continuous total output, optimized for CompactPCI 3U systems. - **Redundant Operation:** Supports dual‑redundant configurations for uninterrupted system power. - **Standard 47‑Pin Interface:** Compliant with PICMG 2.11 power connector standard (Positronic PCIH47 series). - **Hot‑Swappable Design:** Enables live insertion and removal without system shutdown. - **Compact 3U Form Factor:** Fits standard 3U CompactPCI chassis and backplanes. - **High Efficiency:** Typical conversion efficiency of approximately 73 %. - **Comprehensive Protection:** Over‑current, over‑voltage, under‑voltage, surge, and thermal protection with automatic recovery. - **Status Indicators:** Front‑panel LEDs for Power (ON/OK) and Fault (FAIL) conditions. - **Parallel Current Sharing:** Supports load sharing across multiple units on +5 V and +3.3 V rails. - **Safety and EMC Compliance:** Meets UL 1950, CSA C22.2 No. 950, EN 60950, and CE EMI/EMS standards. - **Industrial‑Grade Reliability:** MTBF > 100,000 hours (MIL‑HDBK‑217E), designed for 24/7 operation. - **Operating Temperature Range:** 0 °C – 70 °C (full power to 40 °C with forced air).

Manufacturer: Adlink Technology Inc.

Category: cPCI Power Supplies

- **CompactPCI 3U Form Factor:** Designed to fit standard 3U CompactPCI card cages and backplanes compliant with PICMG 2.11. - **Wide DC Input Range:** Accepts 36 – 72 V DC, supporting telecom and industrial DC power systems. - **Output Power:** Delivers up to 150 W total continuous output power. - **Redundant Operation:** Supports hot‑swap and current‑sharing for redundant configurations. - **Standard 47‑Pin Connector:** Ensures mechanical and electrical compatibility with CompactPCI backplanes such as ADLINK cBP‑3062. - **High Efficiency:** Typical conversion efficiency around 73 %. - **Protection Circuits:** Over‑voltage, over‑current, under‑voltage, and thermal shutdown protection with automatic recovery. - **Status Indicators:** Front‑panel LEDs for Power (green) and Fault (red) indication. - **Safety and EMC Compliance:** Meets UL 1950, CSA C22.2 No. 950, EN 60950, and CE EMC standards. - **Hot‑Swappable Design:** Enables replacement without system shutdown, ensuring high availability. - **Compact and Lightweight:** Approximately 0.85 kg, optimized for dense rack‑mount systems.

Manufacturer: Adlink Technology Inc.

Category: cPCI Power Supplies

- **CompactPCI 3U Form Factor:** Fully compliant with PICMG 2.11 CompactPCI power interface standard, ensuring interoperability with standard 3U/6U CompactPCI chassis and backplanes. - **Redundant Power Architecture:** Supports dual‑redundant configuration for high‑availability systems; hot‑swappable design allows replacement without system shutdown. - **Input Voltage:** 24 V DC nominal input, designed for industrial DC power environments. - **Output Power:** 150 W total continuous output capacity, optimized for embedded and industrial computing platforms. - **Connector Interface:** Standard 47‑pin Positronic PCIH47M400A1 connector for DC input/output and control signals, ensuring compatibility with ADLINK cBP‑3062 redundant backplane. - **High Reliability:** Industrial‑grade design with over‑voltage, over‑current, and thermal protection; MTBF exceeding 100,000 hours (MIL‑HDBK‑217E). - **Hot‑Swappable Operation:** Enables live insertion and removal in redundant configurations, minimizing downtime. - **Compact and Lightweight:** 3U mechanical envelope (40 mm W × 128.5 mm H × 172.8 mm D) with weight approximately 0.85 kg. - **Comprehensive Protection:** Includes input surge suppression, output short‑circuit protection, and automatic recovery after fault removal. - **Status Indicators:** Front‑panel LEDs for “POWER OK” (green) and “FAULT” (red) provide immediate visual diagnostics. - **Compliance:** Meets international safety and EMC standards (UL 1950, EN 60950, CE Mark, EN 55022 Class A, EN 50082‑2).

Manufacturer: Adlink Technology Inc.

Category: cPCI Power Supplies

- **CompactPCI 3U Form Factor:** Designed for integration into CompactPCI systems, compliant with DIN 41494 Part 5 mechanical standards. - **Wide Input Voltage Range:** Accepts DC input from 8.5 V to 36 V (DG4120 variant), suitable for mobile, industrial, and embedded applications. - **Four Independent Output Voltages:** - +5.1 V / 0–14 A - +3.3 V / 0–14 A - +12 V / 0–2 A - –12 V / 0–1 A - **Total Output Power:** Up to 120 W continuous (DG4150 variants up to 150 W with forced ventilation). - **Galvanic Isolation:** Full isolation between input and output circuits for enhanced safety and noise immunity. - **High Efficiency:** 78–82% typical, depending on load and variant. - **Comprehensive Protection:** - Overvoltage protection (OVP) - Overtemperature protection (OTP) - Short-circuit protection (continuous short-circuit proof outputs) - Inrush current limiting - **Control and Monitoring Interfaces:** - ENABLE (EN) and INHIBIT (INH) TTL control inputs - DERATE (DEG) open-collector signal output for power status and derating indication - **Compliance with EMC and Safety Standards:** - EN 50081-1, EN 50082-2 (EMC) - EN 60950 / VDE 0805 (Safety) - Protection Class I (VDE 0100) - **Mechanical Flexibility:** - 19" rack plug-in module (12TE width, 3U height) - Optional DIN-rail and wall-mounting kits available - **Thermal Management:** Natural convection cooling with derating above +50°C; airflow from bottom to top must remain unobstructed. - **Visual Indicators:** Green LEDs for all four output voltages. - **Robust Construction:** Natural anodized aluminum front panel, approximately 1.0 kg total weight.

Manufacturer: MGV

Category: cPCI Power Supplies

- **Intel Pentium III Processor:** Delivers reliable x86 computing performance suitable for industrial and embedded environments. - **Intel 440BX Chipset:** Proven chipset architecture ensuring stable operation and compatibility with legacy and modern CompactPCI systems. - **6U CompactPCI Form Factor:** Fully compliant with PICMG 2.0 CompactPCI specifications, supporting modular system integration. - **Integrated VGA Controller:** SMI-721 graphics chipset with 4 MB video memory, providing analog VGA output for display connectivity. - **High-Speed Ethernet:** Onboard Intel 82559 Ethernet controller offering 10/100 Mbps network connectivity for LAN and industrial networks. - **Memory Expansion:** One 144-pin SODIMM socket supporting notebook-standard SDRAM modules for flexible memory configuration. - **USB Connectivity:** Two USB ports for peripheral connection and data transfer. - **Disk-On-Chip Socket:** Supports solid-state storage modules for embedded operating systems or application data. - **Rear I/O Module Support:** Enables additional I/O expansion through rear transition modules, optimizing front-panel space. - **Industrial-Grade Design:** Built for reliability, long lifecycle, and continuous operation in demanding environments.

Manufacturer: No category

Category: cPCI CPU Card 6U