- **Integrated Modbus TCP/IP Server:** Fully compliant with Modbus/TCP protocol for open connectivity to PLCs, HMIs, and SCADA systems. - **Dual Ethernet Protocols:** Supports both TCP/IP and UDP/IP for flexible communication; UDP streaming to up to 8 remote hosts. - **PoE Powering:** IEEE 802.3af/at compatible Power‑over‑Ethernet eliminates separate DC wiring. - **Isolated I/O Channels:** - 6 digital inputs, dry/wet contact selectable, optically isolated. - 6 relay outputs (Form A), rated 0.6 A @ 125 VAC / 2 A @ 30 VDC. - **DIO Synchronization:** “Mirror” function allows local DI states to be reflected automatically to DO channels. - **Auto‑Off Timer:** Programmable timeout for digital outputs to ensure safe state on communication loss. - **Smart Functions:** - DI counters and latch functions. - DO pulse and delay output modes. - Built‑in watchdogs (module and host). - **Web Server:** Embedded HTTP server for browser‑based monitoring and control. - **Software Integration:** Windows configuration utility, ActiveX (TCPDAQ.OCX), and DLL API for Visual Basic, C/C++, Delphi, and C++ Builder. - **Industrial Design:** Compact ABS enclosure with DIN‑rail, wall, or stack mounting; LED indicators for power, link, and I/O status. - **High Isolation:** 1500 V DC Ethernet isolation and up to 3000 V DC I/O channel isolation. - **Wide Operating Range:** –25 °C to +75 °C, 5–95 % RH non‑condensing.

Manufacturer: TOPSCCC

Category: Modbus TCPIP DIO

- **Ethernet‑based I/O:** 10/100 Mbps Ethernet interface compliant with IEEE 802.3/802.3u standards. - **Protocol Support:** Native Modbus/TCP server and UDP communication for real‑time data streaming to up to eight hosts. - **Power over Ethernet (PoE):** Simplifies installation by combining power and data over a single Cat 5/5e cable. - **Isolated I/O Channels:** - 6 × Digital Inputs (Dry/Wet contact selectable, optically isolated). - 6 × Relay Outputs (Form A, 5 A @ 250 VAC / 5 A @ 30 VDC). - **Smart Functions:** - DI counter and latch functions. - DO pulse and delay output modes. - DIO synchronization (mirror local DI to DO). - Auto‑off timer for digital outputs. - **High Isolation:** 2000 – 3000 V DC isolation between Ethernet, logic, and I/O sections. - **Web Server:** Embedded HTTP server for remote monitoring and control via standard browsers. - **Software Integration:** Supported by ExpertDAQ Windows Utility, ActiveX controls, and DLL API for custom application development. - **Industrial Reliability:** Wide operating temperature range (‑25 °C ~ +75 °C), surge and reverse‑voltage protection, and robust ABS enclosure. - **Mounting Flexibility:** DIN‑rail, wall, or stack mounting options.

Manufacturer: TOPSCCC

Category: Modbus TCPIP DIO

Modbus TCPIP to DI*6(Dry/Wet Contact;Isolation) & 6 Relay(5A@250VAC; 5A@30VDC)Output(Form A)& DIO Synchronization (MirrorLocal- DI to DO) & Auto-Off Time of digital output, PoE Built in, ATMEL CPU, Topsccc

Manufacturer: TOPSCCC

Category: Modbus TCPIP DIO

- **Multi-Interface Connectivity:** The EX5015 supports **USB**, **RS-485**, and **Ethernet** communication interfaces, offering versatile integration options for both local and remote data acquisition systems. - **12 RTD Input Channels:** Provides **12 independent RTD input channels**, allowing simultaneous measurement of multiple temperature points. - **High Resolution:** Each channel features **16-bit resolution**, ensuring high accuracy and fine measurement granularity. - **Wide Sensor Compatibility:** Compatible with standard RTD types such as **Pt100, Pt500, and Pt1000**, supporting both 2-wire and 3-wire configurations. - **Industrial-Grade Design:** Built for reliability in industrial environments, with robust electrical isolation and protection against noise and interference. - **Flexible Deployment:** Can function as a standalone temperature monitoring device or as part of a distributed control system. - **Plug-and-Play via USB:** Direct USB connection enables quick setup and configuration without requiring additional interface converters. - **Network Integration via Ethernet:** Ethernet connectivity allows remote monitoring, configuration, and data logging over LAN or Internet. - **RS-485 Modbus RTU Support:** Enables integration with PLCs, HMIs, and other Modbus-compatible devices for distributed control applications. - **Compact Form Factor:** Designed for DIN-rail or panel mounting, optimizing space utilization in control cabinets. - **High Stability and Low Drift:** Ensures consistent measurement accuracy over time and temperature variations. - **Software Support:** Compatible with standard data acquisition software and SCADA systems; supports Modbus TCP/RTU protocols.

Manufacturer: TOPSCCC

Category: 2*Ethernet Modbus-TCP DIO

- **Multi-Interface Connectivity:** Supports USB, RS-485, and Ethernet interfaces, allowing seamless integration into various network architectures and control systems. - **High-Resolution Analog Inputs:** 16 analog input channels with 16-bit resolution for precise signal measurement and data acquisition. - **Digital I/O Integration:** Includes 2 isolated digital input channels and 1 digital output channel for auxiliary control and monitoring tasks. - **Flexible Input Range:** Configurable analog input ranges suitable for voltage and current signals, enabling compatibility with a wide variety of sensors and transducers. - **Industrial-Grade Design:** Built for reliability in harsh environments, with robust isolation, noise immunity, and durable housing. - **Compact Form Factor:** Space-efficient design suitable for DIN-rail or panel mounting in control cabinets. - **Plug-and-Play Operation:** USB interface supports direct connection to PCs or embedded controllers without requiring external power (depending on configuration). - **Remote Data Acquisition:** Ethernet and RS-485 interfaces enable distributed data collection over long distances. - **High Sampling Accuracy:** 16-bit A/D conversion ensures accurate and stable measurement results. - **Software Compatibility:** Compatible with standard industrial communication protocols and supported by configuration utilities and APIs for integration with SCADA, PLC, and PC-based control systems.

Manufacturer: TOPSCCC

Category: 2*Ethernet Modbus-TCP DIO

- **Multi-Interface Connectivity:** Supports **USB**, **RS-485**, and **Ethernet** interfaces, allowing flexible integration into various network architectures and control systems. - **High Channel Density:** Provides **16 thermocouple input channels**, enabling simultaneous measurement of multiple temperature points. - **High Resolution:** 16-bit analog-to-digital conversion ensures precise and stable temperature readings. - **Digital I/O Integration:** Includes **2 isolated digital input channels** and **1 digital output channel** for event detection, alarm signaling, or control functions. - **Wide Thermocouple Compatibility:** Supports standard thermocouple types (e.g., J, K, T, E, R, S, B, N), making it suitable for diverse industrial and laboratory applications. - **Isolation Protection:** Electrical isolation between channels and communication interfaces enhances reliability and protects against ground loops and electrical noise. - **Compact Modular Design:** Space-efficient form factor suitable for DIN-rail or panel mounting in control cabinets. - **Industrial-Grade Reliability:** Designed for continuous operation in harsh environments with extended temperature ranges and robust housing. - **Plug-and-Play USB Operation:** When connected via USB, the module can be recognized as a standard data acquisition device, simplifying setup and configuration. - **Networked Data Acquisition:** Ethernet interface enables remote monitoring, distributed data collection, and integration with SCADA or cloud-based systems.

Manufacturer: TOPSCCC

Category: 2*Ethernet Modbus-TCP DIO

- **Multi-Interface Communication:** Supports USB, RS-485, and Ethernet interfaces, allowing flexible integration into existing control networks or standalone PC-based systems. - **High Channel Density:** Provides 8 digital output channels (MOSFET type) and 24 optically isolated digital input channels in a single compact module. - **Isolated Digital Inputs:** Each input channel is galvanically isolated to protect against voltage surges, ground loops, and electrical noise, ensuring reliable signal acquisition. - **MOSFET Digital Outputs:** Solid-state outputs provide fast switching, long operational life, and high reliability compared to mechanical relays. - **Industrial-Grade Design:** Built for harsh environments with robust isolation, wide operating voltage range, and durable housing. - **Flexible Communication Protocols:** Compatible with Modbus RTU (RS-485) and Modbus TCP (Ethernet) for easy integration with PLCs, SCADA systems, and industrial PCs. - **Plug-and-Play USB Interface:** Enables direct connection to a PC for configuration, testing, or local control without additional converters. - **Compact Form Factor:** Space-saving design suitable for DIN-rail or panel mounting in control cabinets. - **LED Indicators:** Channel status LEDs for quick diagnostics and monitoring of input/output states. - **Software Support:** Compatible with standard industrial automation software and drivers for Windows/Linux environments.

Manufacturer: TOPSCCC

Category: 2*Ethernet Modbus-TCP DIO

- **Multi-Interface Connectivity:** Supports **USB**, **RS-485**, and **Ethernet** interfaces, enabling flexible integration into various network architectures and control systems. - **High Channel Density:** Provides **16 isolated digital inputs (DI)** and **16 isolated MOSFET digital outputs (DO)** in a compact form factor. - **Electrical Isolation:** Each input and output channel is **galvanically isolated**, ensuring protection against voltage surges, ground loops, and electrical noise. - **MOSFET Output Technology:** Utilizes solid-state MOSFET transistors for switching, offering high reliability, fast response times, and long operational life compared to mechanical relays. - **Industrial-Grade Design:** Engineered for continuous operation in harsh industrial environments, with robust housing, wide operating temperature range, and high noise immunity. - **Flexible Communication Protocols:** Compatible with standard industrial communication protocols over RS-485 and Ethernet, allowing integration with SCADA, PLC, and PC-based control systems. - **Plug-and-Play USB Operation:** When connected via USB, the module can be recognized as a standard device, simplifying configuration and deployment. - **Remote Monitoring and Control:** Ethernet connectivity enables remote access, monitoring, and control of digital I/O channels over LAN or WAN networks. - **Scalable System Integration:** Multiple modules can be networked together to expand I/O capacity for large-scale automation systems. - **Software Support:** Typically supported by configuration utilities, APIs, and drivers for major operating systems, facilitating integration into custom applications.

Manufacturer: TOPSCCC

Category: 2*Ethernet Modbus-TCP DIO

- **Multi-Interface Connectivity:** Supports USB, RS-485, and Ethernet communication, allowing flexible integration into existing or new control architectures. - **10 Relay Digital Outputs (DO):** Each output channel is implemented via a relay, enabling direct control of external loads such as solenoids, lamps, contactors, and other actuators. - **12 Isolated Digital Inputs (DI):** Each input channel is optically isolated to protect the module and connected equipment from voltage spikes, ground loops, and electrical noise. - **High Electrical Isolation:** Input and output channels are isolated from logic and communication circuits, ensuring reliable operation in electrically noisy industrial environments. - **Industrial-Grade Design:** Built for continuous operation in harsh conditions, with robust housing, wide operating voltage range, and surge protection. - **Flexible Communication Protocols:** Compatible with Modbus RTU (RS-485), Modbus TCP (Ethernet), and USB virtual COM port communication, simplifying integration with PLCs, SCADA systems, and PCs. - **Compact Form Factor:** Space-efficient design suitable for DIN-rail or panel mounting in control cabinets. - **Plug-and-Play USB Operation:** When connected via USB, the module can be recognized as a serial device, allowing easy configuration and testing. - **Remote Monitoring and Control:** Ethernet interface enables remote access, configuration, and data acquisition over LAN or Internet. - **LED Indicators:** Status LEDs for power, communication, and channel states provide immediate visual feedback for diagnostics. - **Software Support:** Compatible with various configuration utilities, APIs, and SDKs for Windows and Linux environments.

Manufacturer: TOPSCCC

Category: 2*Ethernet Modbus-TCP DIO

- **Dual Ethernet Ports with Daisy‑Chain Topology:** Integrated two‑port 10/100 Mbps Ethernet switch allows daisy‑chain connections, simplifying network wiring and reducing the need for external switches. - **Auto‑Bypass Protection:** Ensures network continuity even if a module loses power. The auto‑bypass circuit restores communication within approximately one second, maintaining downstream connectivity. - **Mixed I/O Configuration:** Combines 10 digital inputs and 6 digital outputs in a single module, optimizing cost and space for small or distributed control systems. - **Industrial Modbus/TCP Protocol:** Fully compliant with Modbus/TCP for open connectivity with third‑party controllers, HMIs, and SCADA software. Also supports UDP/IP for broadcast data streaming to up to eight remote hosts. - **High Isolation and Reliability:** 3750 Vrms optical isolation between I/O channels and logic circuitry ensures robust operation in noisy industrial environments. - **DIO Synchronization (Mirror Function):** Allows local or remote digital outputs to mirror the state of digital inputs, enabling synchronized control across networked modules. - **Auto‑Off Time Mode:** Provides monostable output operation—after a preset period, the output automatically returns to its default state. - **High/Low Delay Output Modes:** Configurable delay between logic transitions for precise timing control. - **Power‑On and Safe Values:** User‑definable output states at power‑up and during host watchdog timeout conditions to ensure safe system behavior. - **Comprehensive Software Support:** Includes Windows configuration utility, Modbus/TCP DLL, and ActiveX controls for integration with Visual Basic, C++, Delphi, and other development environments. - **Built‑in Web Server:** Embedded HTTP server allows remote monitoring and control of I/O status through a standard web browser.

Manufacturer: TOPSCCC

Category: 2*Ethernet Modbus-TCP DIO

- **Mixed I/O Configuration:** 10 isolated digital inputs (dry contact), 4 isolated digital outputs (open collector, NPN type), and 2 isolated differential hardware counters. - **Industrial Ethernet Interface:** Dual 10/100 Mbps RJ‑45 ports with built‑in Ethernet switch and auto‑bypass protection for daisy‑chain networking. - **Protocol Support:** Fully compliant with Modbus/TCP over TCP/IP and UDP/IP. Supports up to eight simultaneous UDP data stream destinations. - **Isolation & Protection:** 3750 Vrms optical isolation between I/O channels and logic circuitry. Over‑voltage and power‑reversal protection on supply input. - **Advanced Digital Output Modes:** - **DIO Synchronization (Mirror DI to Local/Remote DO):** Automatically mirrors input states to local or remote outputs. - **Auto‑Off Time Mode:** Monostable output operation with programmable timeout. - **High/Low Delay Output:** Configurable delay for rising or falling transitions. - **Pulse Output Mode:** Up to 300 Hz per channel. - **Counters:** Two 32‑bit hardware counters (DI10, DI11) with differential inputs, up to 4.5 kHz frequency, 30 V DC max input. - **Power‑On & Safe Values:** User‑definable output states at power‑up or host watchdog timeout. - **Software Ecosystem:** Supported by TOPSCCC’s Windows utility, Modbus/TCP OPC server, DLL API, and TCPDAQ ActiveX controls for integration with Visual Basic, C++, Delphi, and SCADA systems. - **Web Server:** Embedded HTTP server for remote monitoring and control via standard web browsers.

Manufacturer: TOPSCCC

Category: 2*Ethernet Modbus-TCP DIO

- **Mixed I/O Architecture:** Combines 10 DI, 4 DO, and 2 Counter channels in one compact module for cost‑effective deployment. - **Dual Ethernet Ports:** Integrated 10/100 Mbps switch with auto‑bypass protection enables daisy‑chain networking and rapid recovery (

Manufacturer: TOPSCCC

Category: 2*Ethernet Modbus-TCP DIO

- **Ethernet Connectivity:** Dual 10/100 Mbps RJ‑45 ports with built‑in Ethernet switch for daisy‑chain networking. - **Auto‑Bypass Protection:** Maintains network continuity within ~1 s during power loss of intermediate modules. - **Industrial Protocols:** Full Modbus/TCP over TCP/IP and UDP support for open integration with controllers and SCADA/HMI software. - **Mixed I/O Design:** Combines multiple digital input and output types in one compact module for cost‑effective deployment. - **Isolated I/O Channels:** 3750 Vrms optical isolation between channels and logic circuitry for noise immunity and safety. - **DIO Synchronization:** “Mirror” function allowing local or remote DO channels to follow DI states (match/mismatch latch modes). - **Auto‑Off Time Mode:** Monostable output operation—DO returns to safe state after a preset time. - **High/Low Delay Output:** Configurable delay for transitions from low‑to‑high or high‑to‑low output states. - **Power‑On & Safe Values:** User‑definable output states at power‑up or host watchdog timeout. - **Web Server:** Embedded HTTP server for remote monitoring and control via standard browsers. - **Software Integration:** Supported by TOPSCCC TCPDAQ ActiveX controls, DLL API, and Windows configuration utility. - **DIN‑Rail or Wall Mounting:** Industrial mechanical design for panel or cabinet installation. - **Wide Power Range:** Operates from unregulated 10 – 30 V DC with reverse‑polarity and over‑voltage protection.

Manufacturer: TOPSCCC

Category: 2*Ethernet Modbus-TCP DIO

- **Dual Ethernet Ports with Daisy‑Chain Topology:** Integrated 10/100 Mbps Ethernet switch with auto‑bypass protection allows daisy‑chain networking. If a module loses power, the network automatically recovers within ~1 s, maintaining communication continuity. - **Industrial Modbus/TCP and UDP Support:** Fully compliant with Modbus/TCP over TCP/IP and UDP/IP for open interoperability with controllers, HMIs, and SCADA software. Supports up to eight UDP data stream destinations. - **Mixed I/O Architecture:** Combines digital inputs and outputs in one compact module, reducing system cost and simplifying distributed I/O deployment. - **Isolated I/O Channels:** 3750 Vrms optical isolation between channels and logic circuitry ensures robust protection against electrical noise and ground loops. - **DIO Synchronization (Mirror DI to Local/Remote DO):** Enables automatic mirroring of input states to local or remote outputs, supporting both “DI match DO latch” and “DI mismatch DO latch” modes. - **DO Auto‑Off Time Mode:** Configurable monostable output operation—after a preset time, the output automatically returns to its stable state. - **High/Low Delay Output Modes:** Programmable delay for transitions from low‑to‑high or high‑to‑low output states, useful for sequencing and timing control. - **Power‑On and Safe Values:** User‑defined output states at power‑up or upon host watchdog timeout, ensuring predictable and safe system behavior. - **Comprehensive Software Ecosystem:** Includes Windows configuration utility, Modbus/TCP OPC server, DLL and ActiveX libraries (TCPDAQ), and ASCII command interface for custom integration. - **Built‑in Web Server:** Embedded HTTP server for remote monitoring and control via standard web browsers.

Manufacturer: TOPSCCC

Category: 2*Ethernet Modbus-TCP DIO

- **Mixed I/O Integration:** Combines 7 isolated digital inputs and 4 relay outputs in one module, reducing system complexity and cost. - **Dual Ethernet Ports with Daisy‑Chain Topology:** Built‑in 10/100 Mbps Ethernet switch allows cascading multiple modules without external switches. - **Auto‑Bypass Protection:** Maintains network continuity within ~1 second during power loss of an intermediate module. - **Industrial Modbus/TCP Protocol:** Fully compliant with Modbus/TCP over TCP/IP and UDP for open connectivity with PLCs, SCADA, and HMI systems. - **DIO Synchronization (Mirror Function):** Mirrors local DI states to local or remote DO channels for real‑time signal replication. - **DO Auto‑Off Time Mode:** Enables monostable output operation—DO returns to default state after a preset time. - **High/Low Delay Output Modes:** Configurable delay for transitions from low‑to‑high or high‑to‑low output states. - **Power‑On and Safe Values:** User‑definable output states at power‑up or host watchdog timeout for fail‑safe operation. - **Web Server Functionality:** Embedded HTTP server for remote monitoring and control via standard web browsers. - **Software Integration:** Supported by TOPSCCC’s TCPDAQ ActiveX controls, DLL API, and Windows configuration utility. - **DIN‑Rail or Wall Mounting:** Industrial‑grade mechanical design for panel or cabinet installation. - **High Isolation:** 3750 Vrms optical isolation between channels and logic circuitry. - **Wide Power Range:** Operates from unregulated 10 – 30 V DC with reverse‑polarity and over‑voltage protection.

Manufacturer: TOPSCCC

Category: 2*Ethernet Modbus-TCP DIO

- **Serial‑to‑Ethernet Conversion:** Converts one RS‑232 serial interface into a network‑accessible Ethernet port, allowing remote access and management of serial devices. - **High Reliability:** Industrial‑grade design with redundant power inputs (12–48 V DC) and robust metal housing (IP30 protection). - **Fast Ethernet Redundancy:** Supports Ethernet redundancy with recovery time under 10 ms, ensuring continuous communication in case of link failure. - **Multiple Operation Modes:** Virtual COM, TCP Server, TCP Client, UDP, and Serial Tunnel modes for flexible integration into various network architectures. - **Comprehensive Security:** HTTPS, SSL, SSH, WEP/WPA/WPA2, 802.1X, Radius, and TKIP encryption for secure data transmission and management. - **Event Notification System:** Alerts via Syslog, E‑mail, SNMP Trap, Relay, or Beeper for proactive fault detection. - **Cross‑Platform Drivers:** Virtual COM driver for Windows NT/2000/XP/2003/Vista and fixed TTY driver for Linux. - **NAT Pass‑Through:** Enables management through NAT routers, simplifying remote configuration. - **Compact and Flexible Installation:** DIN‑rail or wall‑mount options for industrial cabinets or control panels. - **User‑Friendly Configuration:** Web console, serial console, and IDS Tool Windows utility for discovery, setup, and monitoring. - **Long‑Term Reliability:** 5‑year manufacturer warranty and industrial‑grade EMC/ESD protection.

Manufacturer: Sunix

Category: Industrial Device Server

- **Multi‑Protocol Serial Connectivity:** Supports four independent serial ports configurable as RS‑232, RS‑422, or RS‑485 (2‑wire or 4‑wire). - **Dual Ethernet Ports:** Two 10/100Base‑TX LAN interfaces for network redundancy or daisy‑chain switch mode. - **Fiber Ethernet Interface:** FX fiber port for long‑distance, EMI‑immune communication. - **Fast Redundancy Recovery:** Ethernet redundancy with automatic recovery time of less than 10 ms. - **Comprehensive Serial Modes:** Virtual COM, TCP Server, TCP Client, UDP, and Serial Tunnel modes for flexible integration. - **Advanced Security:** HTTPS, SSL, SSH, WEP/WPA/WPA2, 802.1X, Radius, and TKIP encryption for secure data transmission. - **Event Notification System:** Real‑time alerts via Syslog, Email, SNMP Trap, Relay output, and Beeper. - **Cross‑Platform Drivers:** Virtual COM driver for Windows NT/2000/XP/2003/Vista and fixed TTY driver for Linux. - **Redundant Power Inputs:** Dual 12–48 V DC inputs with reverse polarity protection. - **Industrial‑Grade Design:** Rugged metal IP30 enclosure, DIN‑rail or wall‑mountable, compact footprint. - **High Reliability:** MTBF > 200,000 hours, 5‑year warranty. - **Ease of Management:** Web‑based HTTPS console, SSH console, and IDS‑Tools Windows utility for discovery, configuration, and monitoring. - **NAT Pass‑Through:** Enables remote management through NAT routers. - **Multi‑Host Access:** Supports up to five simultaneous connections per serial port. - **Fiber Optic Immunity:** Total immunity to EMI/RFI interference, lightning, and ground loops.

Manufacturer: Sunix

Category: Industrial Device Server

- **Dual Network Interfaces:** One 10/100Base‑T(X) Ethernet port (RJ‑45) with auto MDI/MDI‑X and one IEEE 802.11b/g WLAN interface for flexible deployment in wired or wireless networks. - **Wireless Connectivity:** Supports IEEE 802.11b/g standards with data rates up to 54 Mbps. Operates in client mode with DSSS/OFDM modulation and reverse SMA antenna connector. - **High Security:** Comprehensive wireless encryption and authentication: WEP (64/128‑bit), WPA/WPA2, WPA‑PSK (256‑bit), 802.1X authentication, TKIP, and AES encryption. Secure management via HTTPS and SSH. - **Redundant Power Inputs:** Dual 12–48 VDC inputs via terminal block and DC jack ensure uninterrupted operation in case of power source failure. - **Multiple Host Connections:** Supports up to five simultaneous host connections in Virtual COM, TCP Server, TCP Client, or UDP modes, ensuring data redundancy and multi‑host accessibility. - **Event Notification System:** Configurable alerts via Syslog, Email, SNMP trap, relay output, or beeper for proactive fault management. - **Industrial‑Grade Design:** IP‑40 metal enclosure, DIN‑rail and wall‑mount options, wide operating temperature range (‑10 °C to 60 °C), and high vibration/shock resistance. - **Software Flexibility:** Supports Virtual COM, Serial Tunnel, TCP Server/Client, and UDP modes. Compatible with Windows NT/2000/XP/2003/Vista/7 (32/64‑bit). - **Network Management:** Configurable via DS‑Tool utility, web browser (HTTPS), or SSH console. Supports SNMP v1/v2c, DDNS, PPPoE, and NAT pass‑through. - **Ethernet Redundancy:** Fast recovery time (

Manufacturer: Oring

Category: Industrial Device Server

- **Serial‑to‑Ethernet Conversion:** Supports 4× RS‑232 serial ports via a DB62 female connector (with included DB62‑to‑4×DB9 cable). - **Network Interface:** 1× 10/100Base‑T(X) Ethernet port with auto MDI/MDI‑X and built‑in 1.5 kV magnetic isolation. - **Redundant Power Inputs:** Dual 12–48 V DC inputs via 6‑pin terminal block and DC power jack for uninterrupted operation. - **High Reliability:** Overload current protection, reverse polarity protection, and relay output (1 A @ 24 V DC) for fault signaling. - **Rugged Industrial Design:** IP‑30 metal enclosure, DIN‑rail or wall‑mount installation, and wide operating temperature range (‑40 °C to 70 °C). - **Multiple Operation Modes:** Virtual COM, Serial Tunnel, TCP Server, TCP Client, and UDP modes for flexible integration. - **Redundant Host Connections:** Supports up to 5 simultaneous host connections in Virtual COM/TCP modes and 4 in UDP mode. - **Secure Management:** HTTPS and SSH management interfaces; SSL data encryption; IP access control and NAT pass‑through. - **Event Notification:** Syslog, SNMP trap, email alert, relay output, and fault LED for system and communication events. - **Software Utility:** DS‑Tool for Windows (NT/2000/XP/2003/Vista/7 32‑bit) for device discovery, configuration, monitoring, and firmware updates. - **Fast Recovery:** Ethernet redundancy with recovery time 

Manufacturer: Oring

Category: Industrial Device Server

- **8×RS‑232 to 1×10/100TX Ethernet Conversion:** Enables multiple serial devices to communicate over Ethernet networks. - **Versatile Operation Modes:** Supports Virtual COM, Serial Tunnel, TCP Server, TCP Client, UDP, and Ethernet Modem modes. - **Multiple Host Connections:** Up to 5 simultaneous connections in Virtual COM/TCP Server/TCP Client modes and 4 in UDP mode. - **Redundant Power Inputs:** Dual 12–48 V DC inputs via terminal block and power jack ensure uninterrupted operation. - **Network Redundancy:** Ethernet redundancy with recovery time

Manufacturer: Oring

Category: Industrial Device Server

- **Serial‑to‑Ethernet Conversion:** Converts one RS‑422/485 serial interface into a standard 10/100Base‑T(X) Ethernet connection, enabling remote access and control of serial devices over IP networks. - **High Reliability:** Supports Ethernet redundancy with recovery time under 10 ms, ensuring continuous communication in case of link failure. - **Multiple Operation Modes:** Virtual COM, TCP Server, TCP Client, UDP, and Serial Tunnel modes for flexible deployment. - **Advanced Security:** HTTPS, SSL, SSH, WEP/WPA/WPA2, 802.1X, Radius, and TKIP encryption for secure data transmission and management. - **Event Notification System:** Real‑time alerts via Syslog, E‑mail, SNMP trap, relay output, and beeper for proactive fault management. - **Cross‑Platform Drivers:** Virtual COM driver for Windows NT/2000/XP/2003/Vista and fixed TTY driver for Linux systems. - **Redundant Power Inputs:** Dual 12–48 V DC inputs (terminal block and DC jack) with reverse polarity protection. - **Industrial‑Grade Design:** Rugged metal enclosure (IP30 protection), 15 kV ESD protection, and 1.5 kV magnetic isolation on Ethernet port. - **Compact Form Factor:** 72 × 31 × 125 mm (W × D × H) for space‑constrained installations. - **Flexible Mounting:** DIN‑rail and wall‑mount options for versatile installation in control cabinets or equipment racks. - **Comprehensive Management Tools:** IDS‑Tools Windows utility for device discovery, configuration, firmware updates, and monitoring. - **NAT Pass‑Through:** Enables management through NAT routers, simplifying remote access across network boundaries. - **Up to Five Simultaneous Connections:** Supports multiple concurrent sessions in Virtual COM, TCP Server, or Client modes. - **Long‑Term Reliability:** 5‑year manufacturer warranty and industrial‑grade components for extended service life.

Manufacturer: Sunix

Category: Industrial Device Server

- **Dual Ethernet Redundancy:** Two 10/100Base‑T(X) RJ‑45 ports provide network redundancy with automatic recovery time under 10 ms, ensuring uninterrupted communication in case of link failure. - **PoE PD Functionality:** ETH2 port supports IEEE 802.3af Power Device (PD) standard, allowing the unit to be powered directly via Ethernet with up to 8 W consumption. - **4 Isolated Serial Ports:** Four RS‑422/485 ports with 2.5 kV isolation and 15 kV ESD protection safeguard connected equipment from electrical surges and interference. - **Flexible Serial Modes:** Each port can be independently configured for RS‑422, 2‑wire RS‑485, or 4‑wire RS‑485 operation. - **Versatile Communication Modes:** Supports Virtual COM, TCP Server, TCP Client, UDP, and Serial Tunnel modes for flexible integration into existing systems. - **High Security:** HTTPS, SSL, SSH, WEP/WPA/WPA2, 802.1X, Radius, and TKIP encryption ensure secure data transmission and management access. - **Event Notification System:** Alerts via Syslog, E‑mail, SNMP Trap, Relay Output, and Beeper for proactive fault management. - **Redundant Power Inputs:** Dual 12–48 V DC inputs on a 6‑pin removable terminal block with reverse polarity protection. - **Industrial‑Grade Design:** Metal IP30 enclosure, wide operating temperature range (‑10 °C to 55 °C), and vibration/shock resistance per IEC 60068 standards. - **Comprehensive Software Suite:** Includes IDS‑Tools for Windows for device discovery, configuration, monitoring, and group firmware updates. - **Cross‑Platform Drivers:** Virtual COM driver for Windows NT/2000/XP/2003/Vista and fixed TTY driver for Linux systems. - **Compact and Flexible Installation:** 52 × 106 × 144 mm enclosure supports both DIN‑rail and wall‑mount installation. - **Long‑Term Reliability:** MTBF ≥ 200,000 hours and backed by a 5‑year manufacturer warranty.

Manufacturer: Sunix

Category: Industrial Device Server

- **Multi-Protocol Serial Connectivity:** Supports 4 serial ports configurable as RS-232, RS-422, or RS-485, enabling integration of diverse legacy serial devices into modern Ethernet networks. - **Dual Gigabit Ethernet Ports:** Equipped with 2 × 10/100/1000Base-T(X) RJ-45 ports for high-speed network connectivity and redundancy. - **PoE Client Capability:** The Ethernet ports support PoE (Power over Ethernet) client mode, allowing the device to be powered directly from a PoE-enabled switch or injector, simplifying installation and reducing cabling requirements. - **Electrical Isolation:** Each serial port is isolated to protect connected equipment from electrical surges, ground loops, and electromagnetic interference, ensuring stable and safe operation in industrial environments. - **Redundant Power Inputs:** Dual 12–48 VDC power input design provides redundancy and ensures continuous operation in case of power source failure. - **Compact Industrial Design:** Rugged metal enclosure with compact dimensions (54.2 × 106.1 × 145.4 mm) and a weight of 705 g, suitable for DIN-rail or wall mounting in space-constrained control cabinets. - **Secure Communication:** Designed with advanced security mechanisms to protect data integrity and prevent unauthorized access, supporting encrypted communication protocols and secure management interfaces. - **Wide Operating Voltage Range:** Operates reliably across a broad DC voltage range, accommodating various industrial power systems. - **Low Power Consumption:** Maximum power consumption of 7 W, optimizing energy efficiency for continuous 24/7 operation. - **Industrial Reliability:** Engineered for high durability, vibration resistance, and extended service life in demanding industrial environments.

Manufacturer: Oring

Category: Industrial Device Server

- **Serial‑to‑Fiber Conversion:** Converts RS‑232/422/485 serial data to Ethernet over 100Base‑FX fiber, supporting multi‑mode fiber up to 2 km at 1310 nm wavelength. - **Multi‑Protocol Support:** Operates in Virtual COM, TCP Server, TCP Client, UDP, and Serial Tunnel modes for flexible integration. - **High Reliability:** Dual redundant 12–48 V DC power inputs (terminal block and DC jack) with reverse polarity protection. - **Fast Ethernet Redundancy:** Recovery time

Manufacturer: Sunix

Category: Industrial Device Server

- **Multi‑Protocol Serial‑to‑Ethernet Conversion:** Supports RS‑232, RS‑422, and RS‑485 (2‑wire/4‑wire) interfaces through a DB9 male connector. - **Fiber Ethernet Connectivity:** 1×100Base‑FX port with SC connector; single‑mode fiber supports up to 30 km transmission distance at 1310 nm wavelength. - **High Reliability and Redundancy:** Dual 12–48 V DC power inputs (terminal block and DC jack) with reverse polarity protection; Ethernet redundancy recovery time

Manufacturer: Sunix

Category: Industrial Device Server