SUCHEN SIE DIE PASSENDE

INDUSTRIELLE LÖSUNG?

Entdecken Sie Embedded-, Kommunikations- und Automatisierungslösungen für Ihre Anwendung.

Network

Industrielle Netzwerktechnik verbindet Maschinen, Anlagen und Systeme sicher und zuverlässig. Sie schafft die Grundlage für stabile Datenkommunikation, Fernwartung und geschützte Prozesse und ist damit ein zentraler Baustein moderner Industrieumgebungen.

Unterkategorien

4.1 - (Industrial Ethernet) Industrial-Ethernet-Komponenten für die Vernetzung von Maschinen, Feldgeräten und Leitsystemen.
4.1.1 - (Managed Switches) Managed Ethernet-Switches für die konfigurierbare Vernetzung und Überwachung industrieller Anlagen.
4.1.1.1 - (100Mb Switches) Managed Fast-Ethernet-Switches mit 100-Mbit/s-Anschlüssen für industrielle Datennetze.
4.1.1.2 - (GbE Switches) Managed Gigabit-Ethernet-Switches für konfigurierbare industrielle Netzwerkverbindungen.
4.1.1.3 - (Rack GbE Switches) Managed Gigabit-Ethernet-Switches für zentrale Netzwerkverteilung in Rack-Installationen.
4.1.1.4 - (PoE And/Or IP67) Managed Switches mit PoE-Funktionen oder IP67-Ausführung für entsprechende industrielle Einsatzbedingungen.
4.1.2 - (Lite-Managed Switches) Lite-Managed-Switches mit grundlegenden Konfigurationsfunktionen für industrielle Ethernet-Netze.
4.1.2.1 - (Box Type) Lite-Managed-Switches im Box-Gehäuse für kompakte industrielle Netzwerkinstallationen.
4.1.2.2 - (Switch Card) Ethernet-Switch-Karten mit Managementfunktionen für die Integration in kompatible Systeme.
4.1.3 - (Unmanaged Switches) Unmanaged Ethernet-Switches für die direkte Vernetzung industrieller Geräte ohne Switch-Konfiguration.
4.1.4 - (Industrial Wireless) Drahtlose Netzwerkkomponenten für industrielle Geräteanbindung und mobile Kommunikation.
4.1.4.1 - (Access Points) WLAN-Access-Points zur drahtlosen Anbindung industrieller Endgeräte an bestehende Netzwerke.
4.1.4.2 - (Access Point Router) WLAN-Router mit Access-Point-Funktionen zur Verbindung drahtloser und kabelgebundener Netze.
4.1.4.3 - (3G/4G Access Point Router) 3G-/4G-Router mit Access-Point-Funktionen für standortübergreifende Geräte- und Anlagenanbindung.
4.1.4.4 - (M2M Gateway) M2M-Gateways für den Datenaustausch zwischen Maschinen und übergeordneten Kommunikationssystemen.
4.1.4.5 - (Antenna Cable) Antennenkabel für die Verbindung von Funkmodulen, Routern und externen Antennen.
4.1.4.6 - (M12 Cable) M12-Kabel für die Verbindung kompatibler industrieller Netzwerk- und Kommunikationsgeräte.
4.1.5 - (Industrial USB) Industrielle USB-Komponenten für die Anbindung und Erweiterung von Peripherieverbindungen.
4.1.6 - (Ind.Media Conv.) Medienkonverter zur Verbindung unterschiedlicher Übertragungsmedien in industriellen Ethernet-Netzen.
4.1.6.1 - (Rack Media Converter) Medienkonverter für die gebündelte Integration von Übertragungsstrecken in Rack-Systeme.
4.1.6.2 - (Industrial Media Converter) Industrielle Medienkonverter für den Übergang zwischen Kupfer- und Glasfaserverbindungen.
4.1.6.3 - (Std. Media Conv.) Medienkonverter für die Verbindung von Ethernet-Strecken mit unterschiedlichen Anschlussmedien.
4.2 - (Rugged Devices) Netzwerkgeräte für Anwendungen mit erhöhten Anforderungen an Gehäuse und Umgebungsbeständigkeit.
4.2.1 - (EN50155 Certified Railway) Netzwerkgeräte für Bahnanwendungen mit produktspezifischen Anforderungen nach EN 50155.
4.2.1.1 - (Railway EN50155 Switches) Ethernet-Switches für Bahnnetzwerke unter Berücksichtigung der jeweiligen EN-50155-Geräteausführung.
4.2.1.2 - (PoE Unmanaged EN50155) Unmanaged PoE-Switches für die Vernetzung und Versorgung von Endgeräten in Bahnanwendungen.
4.2.1.3 - (PoE Managed EN50155) Managed PoE-Switches für konfigurierbare Netzwerk- und Versorgungslösungen in Bahnanwendungen.
4.2.1.4 - (EN50155 GbE Umanaged) Unmanaged Gigabit-Ethernet-Switches für die Gerätevernetzung in Bahnanwendungen.
4.2.1.5 - (Railway EN50155 Access Point) WLAN-Access-Points für die drahtlose Kommunikation in entsprechend ausgelegten Bahnnetzwerken.
4.2.1.6 - (EN50155 Cellular) Mobilfunkgeräte zur externen Datenanbindung von Systemen in Bahnanwendungen.
4.2.2 - (Smart Grid IEC-61850) Netzwerkkomponenten für Energieanlagen und Kommunikationssysteme im IEC-61850-Umfeld.
4.2.3 - (Oil & Gas (C1D2 Approved)) Netzwerkgeräte für Öl- und Gasanwendungen mit produktspezifischer Class-I-Division-2-Zulassung.
4.2.4 - (Marine (IEC60945) IEEE 1588v2) Netzwerkgeräte für maritime Anwendungen mit produktspezifischen IEC-60945- und Zeitsynchronisationsfunktionen.
4.3 - (Industrial Network Accessories) Module, Kabel, Netzteile und Verwaltungssoftware für industrielle Netzwerkinstallationen.
4.3.1 - (Admin Software) Administrationssoftware zur Einrichtung, Verwaltung und Überwachung kompatibler Netzwerkgeräte.
4.3.2 - (SFP+ Modules 10Gb) SFP+-Transceiver für kompatible Netzwerkgeräte und 10-Gigabit-Ethernet-Verbindungen.
4.3.3 - (SFP Modules GbE) SFP-Transceiver für kompatible Netzwerkgeräte und Gigabit-Ethernet-Verbindungen.
4.3.4 - (SFP Modules 100Mb) SFP-Transceiver für kompatible Netzwerkgeräte und 100-Mbit/s-Ethernet-Verbindungen.
4.3.5 - (FX Patch Cords) Glasfaser-Patchkabel zur Verbindung optischer Netzwerkanschlüsse in industriellen Datennetzen.
4.3.6 - (Power Supplies) Netzteile für die elektrische Versorgung industrieller Netzwerk- und Kommunikationsgeräte.
4.4 - (Ethernet - Serial Over IP) Serial-over-IP-Lösungen zur Einbindung serieller Geräte in Ethernet-Netzwerke.
4.4.1 - (Industrial Device Server) Industrielle Device-Server, Gateways und I/O-Module für die Anbindung dezentraler Geräte.
4.4.1.1 - (Serial Gateway: USB LoRa Bluetooth Repeater) Gateways, Konverter und Repeater für serielle, USB- und drahtlose Geräteverbindungen.
4.4.1.1.1 - (Gateway serial USB LoRa Bluetooth Repeater) Kommunikationsmodule für die Verbindung serieller Geräte über USB und drahtlose Schnittstellen.
4.4.1.1.2 - (Gateway Ethernet) Ethernet-Gateways für den Datenaustausch zwischen Feldgeräten und übergeordneten Netzwerken.
4.4.1.1.3 - (Bluetooth Gateway) Bluetooth-Gateways zur drahtlosen Anbindung kompatibler Geräte und Sensorsysteme.
4.4.1.1.4 - (Gateway LoRaWAN) LoRaWAN-Gateways zur Anbindung kompatibler Funkgeräte an IoT-Netzwerke.
4.4.1.1.5 - (Gateway Wireless) Wireless-Gateways für die Integration drahtloser Geräteverbindungen in industrielle Kommunikationssysteme.
4.4.1.1.6 - (Repeater RS485) RS-485-Repeater zur Erweiterung und Segmentierung serieller Busverbindungen.
4.4.1.1.7 - (Converter) Schnittstellenkonverter für die Verbindung industrieller Geräte mit unterschiedlichen Kommunikationsanschlüssen.
4.4.1.1.8 - (USB Converter) USB-Konverter zur Anbindung kompatibler serieller Geräte an industrielle Computersysteme.
4.4.1.2 - (RS485 RS422) RS-422-/RS-485-Module für dezentrale Mess-, Steuerungs- und Kommunikationsaufgaben.
4.4.1.2.1 - (Module AD In) Analoge Eingangsmodule zur dezentralen Messsignalerfassung über serielle Kommunikationsverbindungen.
4.4.1.2.2 - (Module AD Out) Analoge Ausgangsmodule zur dezentralen Ausgabe von Sollwerten über serielle Kommunikationsverbindungen.
4.4.1.2.3 - (Module AD DIO) I/O-Module für kombinierte analoge Messaufgaben und digitale Signalverarbeitung.
4.4.1.2.4 - (Module Relay DIO) Digitale I/O- und Relaismodule zur dezentralen Erfassung und Ausgabe von Schaltsignalen.
4.4.1.2.5 - (Module Counter) Zählermodule für die dezentrale Erfassung von Impulsen und Ereignissen über serielle Verbindungen.
4.4.1.3 - (Modbus Modules) Modbus-Module zur Integration dezentraler Mess- und I/O-Signale in industrielle Steuerungen.
4.4.1.3.1 - (Modbus AD In) Analoge Modbus-Eingangsmodule zur Erfassung von Sensorsignalen und Prozessmesswerten.
4.4.1.3.2 - (Modules Analog Out) Analoge Modbus-Ausgangsmodule für die dezentrale Ausgabe industrieller Soll- und Steuersignale.
4.4.1.3.3 - (Modules Digital IO) Digitale Modbus-I/O-Module für die dezentrale Verarbeitung von Schalt- und Statussignalen.
4.4.1.3.4 - (Modules Relay) Modbus-Relaismodule zur dezentralen Ansteuerung elektrischer Schaltfunktionen.
4.4.1.3.5 - (Modules Counter) Modbus-Zählermodule für die Erfassung von Impulsen und Ereignissen in Automatisierungssystemen.
4.4.1.4 - (Modbus DOS Modules) Embedded-DOS-Module für kompatible industrielle Kommunikations- und Steuerungsanwendungen.
4.4.1.4.1 - (Modules RS485/RS232) RS-232-/RS-485-Module für die serielle Anbindung kompatibler Embedded- und Steuerungssysteme.
4.4.1.4.2 - (Modules addressable RS485/RS232) Adressierbare RS-232-/RS-485-Module zur gezielten Kommunikation mit seriellen Teilnehmern.
4.4.1.4.3 - (Modules Ethernet/RS485/RS232) Kommunikationsmodule zur Verbindung von Ethernet-Netzen mit RS-232- und RS-485-Geräten.
4.4.1.4.4 - (Modules Ethernet/Modbus) Ethernet-/Modbus-Module zur Anbindung industrieller Geräte an übergeordnete Datennetze.
4.4.1.5 - (Modbus AIO / DIO) Modbus-I/O-Module für analoge und digitale Signale in dezentralen Automatisierungssystemen.
4.4.1.5.1 - (Modbus TCPIP DIO) Digitale Modbus-TCP-I/O-Module zur Erfassung und Ausgabe von Signalen über Ethernet.
4.4.1.5.2 - (2*Ethernet Modbus-TCP DIO) Digitale Modbus-TCP-I/O-Module mit zwei Ethernet-Anschlüssen für industrielle Netzwerkintegration.
4.4.1.5.3 - (USB/RS485/Ethernet w Multi I/O) Multifunktions-I/O-Module mit USB-, RS-485- oder Ethernet-Anbindung für dezentrale Mess- und Steuerungsaufgaben.
4.4.2 - (Industrial Device Server) Industrielle Device-Server zur Einbindung serieller Geräte in Ethernet-basierte Kommunikationssysteme.
4.4.3 - (RS232) RS-232-Komponenten zur Anbindung serieller Peripherie an industrielle Kommunikationssysteme.
4.4.4 - (Serial Over IP RS232/485) Serial-over-IP-Geräte für den Zugriff auf RS-232- und RS-485-Schnittstellen über Ethernet.
4.4.5 - (Modbus Gateways) Modbus-Gateways zur Verbindung unterschiedlicher Modbus-Netze und Übertragungswege.
4.5 - (Remote IO Devices) Remote-I/O-Geräte für die dezentrale Erfassung und Ausgabe industrieller Mess- und Steuersignale.
4.5.1 - (USB Data Acquisition) USB-Messmodule für die externe Datenerfassung an industriellen Rechnern und Prüfplätzen.
4.5.2 - (Ethernet / USB / RS485 / RS232 Modbus IO) Modbus-I/O-Geräte mit Ethernet-, USB-, RS-485- oder RS-232-Anbindung für dezentrale Anwendungen.
4.5.3 - (Ethernet IO) Ethernet-I/O-Module zur dezentralen Verarbeitung von Mess- und Steuersignalen im Netzwerk.
4.5.3.1 - (Modbus Analog) Analoge Modbus-I/O-Module für netzwerkbasierte Messwerterfassung und Signalausgabe.
4.5.3.2 - (Modbus Digital) Digitale Modbus-I/O-Module zur netzwerkbasierten Erfassung und Ausgabe von Schaltsignalen.
4.5.3.3 - (PoE Modbus Digital) Digitale Modbus-I/O-Module mit PoE für Datenübertragung und Versorgung über Ethernet.
4.5.4 - (Ethernet Modules) Ethernet-Module für die Integration dezentraler I/O- und Kommunikationsfunktionen.
4.5.4.1 - (Bridging IO Modules) Bridging-Module zur Verbindung von RS-232-/RS-485-Geräten und I/O-Signalen mit Dual-LAN-Systemen.
4.5.4.2 - (Analog Modules) Analoge Ethernet-Module für die dezentrale Verarbeitung industrieller Mess- und Ausgangssignale.
4.5.4.3 - (Digital Modules) Digitale Ethernet-Module für die netzwerkbasierte Verarbeitung von Status- und Schaltsignalen.
4.5.5 - (RS485 DIN Rail IO Modules) RS-485-I/O-Module für DIN-Schienen-Montage in dezentralen Mess- und Steuerungsanlagen.
4.5.6 - (Dataforth Data Acquisition) Datenerfassungskomponenten von Dataforth für industrielle Mess- und Prozessanwendungen.
4.5.7 - (RS232 Measure And Control Modules) RS-232-Mess- und Steuermodule zur seriellen Anbindung dezentraler Sensoren und Aktoren.
4.5.8 - (ZigBee Modules) ZigBee-Module für die drahtlose Übertragung von Sensor- und Betriebsdaten in kompatiblen Netzen.
4.5.9 - (CAN Bus) CAN-Bus-Komponenten für den Datenaustausch in industriellen Geräte- und Steuerungsnetzen.
4.6 - (Ethernet Remote Monitoring and Control) Ethernet-Komponenten für die entfernte Überwachung und Steuerung industrieller Geräte und Prozesse.
4.7 - (Remote IO Systems) Remote-I/O-Systeme für den modularen Aufbau dezentraler Mess- und Steuerungsfunktionen.
4.7.1 - (HSL RT IO System) HSL-I/O-Komponenten für zeitkritische Signalverarbeitung in kompatiblen Automatisierungssystemen.
4.7.2 - (Contec System) Modulare I/O-Systeme von Contec für industrielle Mess- und Steuerungsanwendungen.
4.7.3 - (Contec USB System) USB-basierte I/O-Systeme von Contec zur externen Erweiterung industrieller Rechner.
4.8 - (Bus Extensions) Buserweiterungen für die Anbindung zusätzlicher PCI-, PXI- und CardBus-Baugruppen.

Produkte

1607 Produkte

Nr. Code Produkt Preis Menge
4.2.4 Industrial Managed 20-port 16*1000TX 4*100FX MM Switch IGS-9164FX-MM-SC
Industrial Managed 20-port 16*1000TX 4*100FX MM Switch

Industrial Managed 16*1000TX and 4*100FX Switch, multi-mode fiber ports for distances up to 2km, RS232 console port, fast redundant Ethernet ring (recovery time less than 30ms over 250 units), 9k6 jumbo frame support, alarm LED e-mail warning system log output, DIN-rail mounting, 96*106*154mm, dual DC power input 12..48VDC ~16W with overload and reverse polarity protection, extended -40°..75°C operating temperature, Oring

Hersteller: Oring

Kategorie: Marine (IEC60945) IEEE 1588v2

Angebot anfragen
4.2.4 Industrial Managed 20-port 16*1000TX 4*100FX SS Switch IGS-9164FX-SS-SC
Industrial Managed 20-port 16*1000TX 4*100FX SS Switch

- **High‑Density Port Configuration:** 16 × 10/100/1000Base‑T(X) RJ‑45 ports (auto MDI/MDIX) and 4 × 100Base‑FX single‑mode SC fiber ports. - **Long‑Distance Fiber Connectivity:** Single‑mode fiber operation at 1310 nm wavelength, supporting transmission distances up to **30 km**. - **Industrial‑Grade Redundancy:** - **O‑Ring** proprietary redundancy with

Hersteller: Oring

Kategorie: Marine (IEC60945) IEEE 1588v2

Angebot anfragen
4.2.4 Industrial Managed 20-port 16*1000TX 4*1000FX MM Switch IGS-9164GF-MM-SC
Industrial Managed 20-port 16*1000TX 4*1000FX MM Switch

- **High‑Density Port Configuration:** 16 × 10/100/1000Base‑T(X) RJ‑45 ports with auto MDI/MDI‑X and 4 × 1000Base‑SX multi‑mode fiber ports (SC connectors, 850 nm, 550 m typical distance). - **Industrial Redundancy Technologies:** - **O‑Ring:** Proprietary ORing redundancy with recovery

Hersteller: Oring

Kategorie: Marine (IEC60945) IEEE 1588v2

Angebot anfragen
4.2.4 Industrial Managed 20-port 16*1000TX 4*1000FX SS Switch IGS-9164GF-SS-SC
Industrial Managed 20-port 16*1000TX 4*1000FX SS Switch

- **High‑Port Density:** 20 total ports — 16 × 10/100/1000Base‑T(X) RJ‑45 and 4 × 1000Base‑LX single‑mode fiber ports (SC connectors). - **Long‑Distance Fiber Connectivity:** Single‑mode fiber links up to 10 km at 1310 nm wavelength. - **Redundant Ethernet Technologies:** - **O‑Ring** proprietary redundancy (

Hersteller: Oring

Kategorie: Marine (IEC60945) IEEE 1588v2

Angebot anfragen
4.2.4 Industrial Managed 24-port 16*1000TX 8*1000SFP Switch IGS-9168GP
Industrial Managed 24-port 16*1000TX 8*1000SFP Switch

- **High‑Performance Switching:** 24‑port Gigabit architecture with 48 Gbps switching bandwidth and 7 µs latency. Store‑and‑forward processing with 8 K MAC address table and 8 hardware priority queues. - **Redundant Networking:** - **O‑Ring** proprietary redundancy with

Hersteller: Oring

Kategorie: Marine (IEC60945) IEEE 1588v2

990,00 EUR (w/o VAT)
4.2.4 Industrial Managed 20-port 8*1000TX 12*1000SFP Switch IGS-9812GP
Industrial Managed 20-port 8*1000TX 12*1000SFP Switch

- **Port Configuration:** 8×10/100/1000Base‑T(X) RJ‑45 ports (Auto MDI/MDI‑X) and 12×100/1000Base‑X SFP slots. - **Redundancy:** - ORing proprietary O‑Ring redundancy (

Hersteller: Oring

Kategorie: Marine (IEC60945) IEEE 1588v2

895,00 EUR (w/o VAT)
4.2.4 Industrial Man. 16-port 8*1000TX 4*100FX MM 4*SFP1000 Switch IGS-9844GPF-MM-SC
Industrial Man. 16-port 8*1000TX 4*100FX MM 4*SFP1000 Switch

Industrial Managed 8*1000TX and 4*SFP1000 and 4*1000FX Switch, multi-mode fiber ports for distances up to 10m, RS232 console port, fast redundant Ethernet ring (recovery time less than 30ms over 250 units), 9k6 jumbo frame support, alarm LED e-mail warning system log output, DIN-rail mounting, 96*106*154mm, dual DC power input 12..48VDC ~15W with overload and reverse polarity protection, extended -40°..70°C operating temperature, Oring

Hersteller: Oring

Kategorie: Marine (IEC60945) IEEE 1588v2

Angebot anfragen
4.2.4 Industrial Man. 16-port 8*1000TX 4*100FX SS 4*SFP1000 Switch IGS-9844GPF-SS-SC
Industrial Man. 16-port 8*1000TX 4*100FX SS 4*SFP1000 Switch

- **Port Configuration:** - 8 × 10/100/1000Base‑T(X) RJ‑45 ports (Auto MDI/MDI‑X) - 4 × 100/1000Base‑X SFP slots - 4 × 1000Base‑X single‑mode fiber ports (SC connectors) - **High‑Speed Switching:** - 40 Gbps switching bandwidth - 7 µs latency (store‑and‑forward architecture) - 8 K MAC address table, 8 priority queues, 10 KB jumbo frame support - **Redundancy & Reliability:** - ORing proprietary **O‑Ring** redundancy (recovery

Hersteller: Oring

Kategorie: Marine (IEC60945) IEEE 1588v2

Angebot anfragen
4.2.4 Managed 16-port 8*1000TX 4*1000FX MM 4*SFP1000 Switch IGS-9844GPFX-MM-SC
Managed 16-port 8*1000TX 4*1000FX MM 4*SFP1000 Switch

- **Port Configuration:** - 8 × 10/100/1000Base-T(X) RJ-45 ports (auto MDI/MDI-X) - 4 × 100/1000Base-X SFP slots - 4 × 100Base-FX multi-mode fiber ports (SC connectors, up to 550 m) - 1 × RS-232 console port (RJ-45 interface) - **Network Redundancy:** - Proprietary **O-Ring** technology with recovery time

Hersteller: Oring

Kategorie: Marine (IEC60945) IEEE 1588v2

Angebot anfragen
4.2.4 Managed 16-port 8*1000TX 4*1000FX SS 4*SFP1000 Switch IGS-9844GPFX-SS-SC
Managed 16-port 8*1000TX 4*1000FX SS 4*SFP1000 Switch

- **Port Configuration:** - 8 × 10/100/1000Base‑T(X) RJ‑45 copper ports (auto MDI/MDI‑X) - 4 × 100/1000Base‑X SFP slots - 4 × 100Base‑FX single‑mode fiber ports (SC connectors, up to 2 km) - 1 × RS‑232 console port (RJ‑45 interface) - **Redundancy & Reliability:** - ORing proprietary **O‑Ring** technology with recovery time

Hersteller: Oring

Kategorie: Marine (IEC60945) IEEE 1588v2

Angebot anfragen
4.2.4 Industrial Man. 20-port 8*1000TX 12*1000SFP Switch Layer 3 IGS-R9812GP-L3
Industrial Man. 20-port 8*1000TX 12*1000SFP Switch Layer 3

- **Layer‑3 Routing:** Supports static and RIP routing for efficient inter‑VLAN and inter‑subnet communication. - **High Port Density:** 20 total ports (8 RJ45 + 12 SFP) for flexible copper and fiber connectivity. - **Redundant Network Technologies:** - **O‑Ring** proprietary redundancy with

Hersteller: Oring

Kategorie: Marine (IEC60945) IEEE 1588v2

Angebot anfragen
4.2.4 4-port 100FX module (Multi Mode) SWM-04FX-MM-SC
4-port 100FX module (Multi Mode)

- **Four 100Base‑FX Multi‑Mode Fiber Ports:** Each port supports SC‑type connectors for multi‑mode fiber operation, providing reliable optical communication over distances up to 2 km (typical for 850 nm multi‑mode fiber). - **Modular Integration:** Designed for installation into the RGS‑9000 chassis, occupying one of the available interface slots. The modular design allows flexible combinations of copper, fiber, and 10 Gbit/s uplink modules. - **Industrial‑Grade Design:** Fully compliant with **IEC 61850‑3** and **IEEE 1613** standards for power substation and railway environments, ensuring electromagnetic immunity, vibration resistance, and extended temperature operation. - **High Network Reliability:** Supports ORing’s proprietary **O‑Ring** redundancy protocol with recovery times under **30 ms** across up to 250 nodes, as well as **MSTP**, **MRP**, and **O‑Chain** topologies for multi‑ring redundancy. - **Comprehensive Management:** Managed through the RGS‑9000’s web interface, CLI, Telnet, SNMP v1/v2c/v3, or ORing’s **Open‑Vision** centralized management software. - **Enhanced Security:** Supports HTTPS, SSH, RADIUS, TACACS+, 802.1X authentication, ACLs, and device binding for secure network access control. - **Energy‑Efficient Operation:** Incorporates IEEE 802.3az Energy‑Efficient Ethernet technology to reduce power consumption during low network activity. - **Wide Temperature Range:** Operates reliably from **‑40 °C to +85 °C** (depending on chassis configuration) for deployment in extreme industrial environments.

Hersteller: Oring

Kategorie: Marine (IEC60945) IEEE 1588v2

320,00 EUR (w/o VAT)
4.2.4 Module 4*100FX SC Multi mode SWM-04FX-MM-SC-D
Module 4*100FX SC Multi mode

The SWM‑04FX‑MM‑SC‑D provides 4 additional fiber‑optic Fast Ethernet ports to extend the capacity of compatible modular industrial switches. Key capabilities include: • Four 100Base‑FX multimode fiber ports with SC connectors for robust optical communication • Designed for use in ORing’s modular DIN‑rail managed switches, including the IGS‑9122GPM platform • Hot‑swappable installation without powering down the host switch • Industrial‑grade design suitable for harsh environments and mission‑critical applications • Seamless integration with host device features such as redundant ring protocols (O‑Ring, O‑Chain, MRP, MSTP), QoS, VLAN, and enhanced cybersecurity functions • Optimized for fiber‑based network extension over distances up to 2 km (multimode, 1310 nm) • Supports applications requiring high reliability, EMI immunity, and stable long‑distance optical connections • Part of a wide family of modular expansion options including copper, gigabit fiber, bypass, and M12‑connector modules

Hersteller: Oring

Kategorie: Marine (IEC60945) IEEE 1588v2

Angebot anfragen
4.2.4 4-port 100FX module (Single Mode) SWM-04FX-SS-SC
4-port 100FX module (Single Mode)

- **Industrial‑Grade Fiber Expansion:** Adds four 100Base‑FX single‑mode fiber ports to the RGS‑9000 chassis for extended optical connectivity. - **Connector Type:** SC single‑mode fiber interfaces for long‑haul communication. - **High Immunity to EMI/RFI:** Optical transmission eliminates electrical interference, ideal for substations and rolling stock. - **Modular Integration:** Hot‑swappable module compatible with RGS‑9000 Series managed switches. - **Redundant Networking Support:** Fully compatible with ORing’s **O‑Ring**, **O‑Chain**, and **MRP (IEC 62439‑2)** redundancy protocols, ensuring recovery times under 30 ms across up to 250 nodes. - **Layer 2/3 Managed Switch Compatibility:** Works within RGS‑9000 and RGS‑PR9000 chassis supporting advanced routing, VLAN, QoS, and security features. - **Wide Temperature Operation:** −40 °C to +85 °C (when installed in chassis without 10 G module). - **High Reliability:** Designed to meet **IEC 61850‑3** and **IEEE 1613** standards for power automation and railway applications. - **Centralized Management:** Configurable via Web GUI, Telnet, CLI, or ORing’s Open‑Vision management suite. - **Energy‑Efficient Ethernet:** Supports IEEE 802.3az for reduced power consumption. - **Security Integration:** Works with switch‑level ACLs, 802.1x, RADIUS/TACACS+, HTTPS/SSH, and device binding.

Hersteller: Oring

Kategorie: Marine (IEC60945) IEEE 1588v2

400,00 EUR (w/o VAT)
4.2.4 Module 4*100FX SC Single mode SWM-04FX-SS-SC-D
Module 4*100FX SC Single mode

- **4-Port 100Base-FX Fiber Expansion:** Adds four single-mode fiber ports to compatible modular switches, supporting long-distance Ethernet communication up to 30 km at 1310 nm wavelength. - **Single-Mode Fiber (SS):** Optimized for long-haul industrial networking applications requiring extended reach and minimal signal loss. - **SC Connector Interface:** Standardized, robust optical connectors ensure secure and stable fiber connections in industrial environments. - **Hot-Swappable Design:** The module can be inserted or replaced without powering down the host switch, minimizing network downtime. - **Industrial-Grade Reliability:** Designed for rugged environments with high electromagnetic interference (EMI) resistance and wide temperature tolerance when installed in compatible ORing switches. - **Modular Integration:** Fully compatible with the **IGS-9122GPM** modular managed Ethernet switch, which supports up to three expansion modules for flexible port configuration. - **High MTBF (Mean Time Between Failures):** Ensures long operational life and reduced maintenance requirements. - **DIN-Rail Mounting Compatibility:** When installed in the IGS-9122GPM chassis, the module supports DIN-rail mounting for industrial control cabinets. - **Compliant with IEEE Ethernet Standards:** Fully supports IEEE 802.3u for 100Base-FX operation and integrates seamlessly into Ethernet-based automation systems.

Hersteller: Oring

Kategorie: Marine (IEC60945) IEEE 1588v2

Angebot anfragen
4.2.4 Module 4*1GbE combo port SWM-04GC-D
Module 4*1GbE combo port

- **4×1G Combo Ports:** Each port supports both 10/100/1000Base-T(X) RJ45 and 100/1000Base-X SFP interfaces, providing flexible connectivity for copper or fiber links. - **Hot-Swappable Design:** Enables module replacement or installation without powering down the main switch, ensuring continuous network operation. - **Industrial-Grade Construction:** Built for harsh environments with wide temperature tolerance and IP-30 rated metal enclosure. - **High Reliability:** Mean Time Between Failures (MTBF) of 3,948,727 hours ensures long-term operational stability. - **Modular Scalability:** Designed for use with the IGS-9122GPM’s three expansion slots, allowing flexible network scaling with various module types (Gigabit combo, fiber, or copper). - **Seamless Integration:** Fully compatible with ORing’s proprietary redundancy technologies (O-Ring, O-Chain, MRP, MSTP) when installed in the IGS-9122GPM chassis. - **Energy Efficiency:** Supports IEEE 802.3az Energy-Efficient Ethernet for reduced power consumption during low data activity. - **Advanced Network Management:** When integrated with the IGS-9122GPM, supports centralized management via ORing’s Open-Vision software suite, web interface, CLI, and SNMP. - **Ruggedized for Industrial Use:** Designed for applications in transportation, factory automation, power substations, and other mission-critical industrial networks.

Hersteller: Oring

Kategorie: Marine (IEC60945) IEEE 1588v2

Angebot anfragen
4.2.4 4-port 1000FX module (Multi Mode) SWM-04GF-MM-SC
4-port 1000FX module (Multi Mode)

- **High‑Performance Fiber Connectivity:** Provides four independent 1000Base‑FX multi‑mode fiber ports with SC connectors, supporting full‑duplex Gigabit Ethernet operation over optical fiber. - **Modular Integration:** Designed as a plug‑in module for the RGS‑9000 series chassis, allowing flexible configuration of up to four interface modules per switch (three 1G modules and one 10G module). - **Industrial‑Grade Design:** Built for harsh environments with extended operating temperature ranges (‑40 °C to 85 °C when no 10G module is installed, or ‑20 °C to 60 °C with 10G module present). - **High Reliability and Redundancy:** Fully compatible with ORing’s proprietary O‑Ring and O‑Chain redundancy technologies, providing network recovery times under 30 ms across up to 250 connected devices. - **Standards Compliance:** Conforms to IEEE 802.3z 1000Base‑X and IEEE 802.3x flow control standards, ensuring interoperability with standard Ethernet equipment. - **Ease of Maintenance:** Hot‑swappable module design simplifies installation and replacement without system downtime. - **Optimized for Industrial Applications:** Compliant with IEC 61850‑3 and IEEE 1613 standards for power automation and substation environments, ensuring electromagnetic and environmental robustness. - **Centralized Management:** Fully manageable through the RGS‑9000’s web interface, CLI, SNMP, or ORing’s Open‑Vision network management software.

Hersteller: Oring

Kategorie: Marine (IEC60945) IEEE 1588v2

505,00 EUR (w/o VAT)
4.2.4 Module 4*1000X SC Multi mode SWM-04GF-MM-SC-D
Module 4*1000X SC Multi mode

The SWM‑04GF‑MM‑SC‑D offers key capabilities that enhance an industrial Ethernet backbone: • Four dedicated 1000Base‑SX Gigabit fiber ports • Multi‑mode fiber operation optimized for short- to medium‑distance optical links up to 550 m • SC-type optical connectors for robust, industry‑standard fiber‑termination • Hot‑swappable design supporting uninterrupted module replacement • Seamless integration with the IGS‑9122GPM modular managed switch • Industrial temperature-tolerant construction suitable for harsh environments • Fulfills the modular design philosophy of ORing switches, enabling flexible network expansion • High reliability with documented MTBF ratings • Suitable for mission‑critical redundant topologies supported by the parent switch (O‑Ring, O‑Chain, MRP, MSTP)

Hersteller: Oring

Kategorie: Marine (IEC60945) IEEE 1588v2

Angebot anfragen
4.2.4 4-port 1000FX module (Single Mode) SWM-04GF-SS-SC
4-port 1000FX module (Single Mode)

- **High‑Performance Fiber Connectivity:** Four independent **1000Base‑FX single‑mode** fiber ports supporting full‑duplex Gigabit Ethernet transmission over long distances. - **Industrial‑Grade Design:** Engineered for use in **IEC 61850‑3** and **IEEE 1613** compliant environments, ensuring electromagnetic immunity and reliability in power automation and railway applications. - **Modular Integration:** Designed as a plug‑in module for the **RGS‑9000 Series** chassis, allowing flexible configuration of up to three Gigabit modules and one 10 G SFP+ module per switch. - **SC Optical Interface:** Equipped with four **SC‑type connectors** for single‑mode fiber, simplifying field installation and maintenance. - **Redundant Network Support:** Fully compatible with ORing’s proprietary **O‑Ring** and **O‑Chain** redundancy technologies, providing recovery times under **30 ms** across up to 250 nodes. - **Wide Temperature Operation:** Supports extended industrial temperature ranges from **–40 °C to +85 °C** (when no 10 G module is installed) or **–20 °C to +60 °C** (with 10 G module). - **Seamless Management Integration:** Managed through the RGS‑9000’s web interface, CLI, SNMP, or ORing’s **Open‑Vision** centralized management software. - **High Reliability and Long‑Distance Transmission:** Single‑mode optical design supports transmission distances up to **10 km or more**, depending on fiber type and transceiver characteristics.

Hersteller: Oring

Kategorie: Marine (IEC60945) IEEE 1588v2

598,00 EUR (w/o VAT)
4.3.1 Network Management of up to 1000 IP devices Open-Vision v3.6
Network Management of up to 1000 IP devices

- **Comprehensive Network Management:** Supports centralized configuration, monitoring, and maintenance of up to 1000 IP devices. - **Integrated Utility Suite:** Includes four major modules—**ORing Commander**, **ORing Topology View**, **ORing Host Monitor**, and **ORing MAP**—for complete network visibility and control. - **Automatic Device Discovery:** Scans and identifies all ORing Ethernet switches and IP-based devices within the local network. - **Group Configuration Wizards:** - **IP Setting Wizard** – Batch configuration of IP addresses. - **Firmware Upgrade Wizard** – Simultaneous firmware updates for multiple devices. - **Redundant Ring (O-Ring) Wizard** – Simplified setup of ORing redundancy protocols. - **Visualized Network Topology:** Automatically generates a graphical topology map of all connected devices, with real-time link status and traffic flow visualization. - **Google Map Integration (ORing MAP):** Displays device locations geographically for field-deployed networks. - **Health and Status Monitoring:** Continuous polling and SNMP-based monitoring of device and link health. - **Event Logging and Notification:** Syslog integration, SNMP traps, and email alerts for abnormal events. - **Configuration Backup and Restore:** Supports group backup and restore of switch configurations. - **Unlimited Monitoring Capability:** No restriction on the number of devices monitored concurrently. - **Early Warning System:** Detects and reports network failures at an early stage to minimize downtime. - **Multi-Group Management:** Devices can be organized by IP range or functional group for easier administration. - **Traffic Flow Analysis:** Provides per-node traffic statistics for performance evaluation. - **Cross-Platform Compatibility:** Operates on multiple Windows versions with support for standard network protocols (TCP/IP, UDP, SNMP).

Hersteller: Oring

Kategorie: Admin Software

Angebot anfragen
4.3.1 Monitor 100 and more IP devices with Geo Map Open_Vision_M100
Monitor 100 and more IP devices with Geo Map

- **Comprehensive Network Management:** Supports configuration and monitoring of up to 100 IP devices, with 50 nodes available free of charge. - **Integrated Utility Suite:** Includes Commander, Topology View, Host Monitor, and MIB Browser for full-spectrum management. - **Graphical Topology Visualization:** Automatically discovers and displays network topology using LLDP and SNMP protocols. - **Geo Map Integration:** Displays device locations on Google Maps for geographic visualization of network assets. - **Multi-Domain Management:** Supports discovery and control across different IP domains through routing configuration. - **Group Configuration Wizards:** - **Group IP Setting Wizard** – batch configuration of IP addresses. - **Group Firmware Update Wizard** – simultaneous firmware upgrades. - **Group O-Ring Setting Wizard** – centralized redundancy configuration. - **Real-Time Monitoring:** Host Monitor provides continuous device status updates with visual and audible alarms. - **Syslog Integration:** Built-in Syslog server for event logging and export to Excel. - **SNMP Management:** Full SNMP v1/v2c/v3 support for secure device communication. - **O-Ring Redundancy Management:** Configuration and monitoring of ORing’s proprietary sub-10ms recovery ring topology. - **Security Management:** IP access control, port security, MAC blacklist, and IEEE 802.1x authentication. - **Traffic Control:** VLAN, QoS, IGMP Snooping, and rate limiting for optimized network performance. - **Backup & Restore:** TFTP-based configuration and firmware management. - **Event Notification:** Email and Syslog alerts for system and port events. - **Cross-Platform Compatibility:** Supports Windows NT, 2000, 2003, XP, Vista, and Windows 7.

Hersteller: Oring

Kategorie: Admin Software

880,00 EUR (w/o VAT)
4.3.1 Monitor of up to 1000 IP devices with Geo Map Open_Vision_M1000
Monitor of up to 1000 IP devices with Geo Map

• Supports monitoring and management of up to 1,000 IP devices • Integrated Geo Map (Google Maps–based) visualization for geographic device placement • Full-featured Windows-based utility suite: Commander, Topology View, Host Monitor, MIB Browser • Manage Oring switches with O-Ring topology support (sub-10 ms recovery, ring master detection) • Up to 50 nodes free; license key required for larger deployments • Automatic device discovery across local and remote subnets • Multi-switch configuration wizards: IP configuration, firmware update, and O-Ring setup • Comprehensive SNMP support (v1, v2c, v3) including traps, communities, users, authentication • Advanced network topology mapping using LLDP and SNMP • Integrated syslog server with auto-save and threshold-based export • Host monitoring for any IP-based device regardless of vendor • Supports multi-domain monitoring through routing configuration • Port-level diagnostics, MAC table inspection, rate control, VLAN configuration, redundancy settings • Centralized event logging and warning mechanisms via syslog, email (SMTP), and hardware relay • Backup/restore, auto-provisioning, firmware upgrade tools via TFTP or internal mechanism • Supports Windows NT, 2000, 2003, XP, Vista, Windows 7 • Redundancy technologies: O-Ring, Coupling Ring, Dual Homing, RSTP/STP • Security features: IP security, port security, MAC blacklist, IEEE 802.1x with RADIUS • IGMP Snooping (v1/v2/v3) with auto-querier • QoS with 4 priority queues based on port, 802.1p, or DSCP/TOS • Integrated diagnostic suite for port statistics, link status, traffic flow, and event logs

Hersteller: Oring

Kategorie: Admin Software

4900,00 EUR (w/o VAT)
4.3.1 Monitor 250 and more IP devices with Geo Map Open_Vision_M300
Monitor 250 and more IP devices with Geo Map

Powerful Network Management Windows Utility Suite, up to 250 nodes, Oring Topology View, Oring Commander, Oring Host Monitor, up to 50 nodes free of charge, Oring

Hersteller: Oring

Kategorie: Admin Software

1900,00 EUR (w/o VAT)
4.3.1 Monitor 500 and more IP devices with Geo Map Open_Vision_M500
Monitor 500 and more IP devices with Geo Map

Powerful Network Management Windows Utility Suite, up to 500 nodes, Oring Topology View, Oring Commander, Oring Host Monitor, up to 50 nodes free of charge, Oring

Hersteller: Oring

Kategorie: Admin Software

2900,00 EUR (w/o VAT)