- **Four Isolated Analog Output Channels:** Each channel supports voltage or current output, selectable via software. - **12-bit Resolution:** Provides fine control for analog signal generation with ±3 LSB accuracy for voltage and ±5 LSB for current. - **Bus Isolation:** Ensures electrical isolation between the controller and external analog circuits, improving noise immunity and system safety. - **Multiple Output Ranges:** Configurable for ±10 V, ±5 V, 0–10 V, 0–5 V, or 0–20 mA output ranges. - **High-Speed Conversion:** Settling time of 10 µs per channel for voltage and 20 µs per channel for current output. - **Compact DIN-Rail Mountable Design:** 25.2 mm (W) × 64.7 mm (D) × 94.0 mm (H), stackable without a backplane. - **Software-Configurable Operation:** Supports transparent and synchronous output modes, software or clock-based conversion, and programmable pacer timers. - **Device ID Rotary Switch:** Allows up to eight modules to be uniquely identified and addressed in a single system. - **LED Indicators:** RUN (green) for operational status and STATUS (red) for error indication. - **Flexible Control Interfaces:** Compatible with CONTEC’s Windows driver libraries (API-SBP(W32), API-CAP(W32), API-USBP(WDM)) and F&eIT protocol for Ethernet or USB-based control. - **Wide Controller Compatibility:** Operates with microcontrollers, I/O controllers, and monitoring servers in the F&eIT ecosystem. - **Industrial-Grade Reliability:** Designed for 0–50°C operation, 10–90% RH humidity, and compliance with IEC/EN61000-4-4 noise immunity standards.

Hersteller: Contec

Kategorie: Contec System

- **High-Resolution Analog Output:** 16-bit resolution ensures fine control and high precision in analog signal generation. - **Dual Output Range:** Selectable output ranges of ±10 V (voltage mode) or 0–20 mA (current mode) for flexible interfacing with industrial equipment. - **Bus Isolation:** Complete isolation between the analog output circuitry and the controller bus, enhancing noise immunity and protecting communication integrity. - **Four Independent Channels:** Provides four isolated analog output channels, each capable of voltage or current output. - **FIFO Data Buffer:** 64-word FIFO memory for smooth, continuous data output and reduced CPU load. - **Programmable Pacer Timer:** Internal pacer timer supports output timing from 10 µs to 1,073,741,824 µs, enabling precise cyclic analog signal generation. - **Interrupt Support:** Programmable interrupt sources (IRQ5, IRQ7, IRQ9) for event-driven control. - **Compact DIN Rail Mounting:** 25.2 mm (W) × 64.7 mm (D) × 94.0 mm (H) form factor with one-touch DIN rail mounting mechanism. - **Stackable F&eIT Bus Connection:** Simple side-by-side stacking eliminates the need for a backplane, allowing up to eight modules per controller. - **Software Integration:** Compatible with CONTEC’s API-SBP(W32) and API-CAP(W32) driver libraries for Windows, supporting Visual Basic, Visual C++, and other Win32 API-based development environments. - **Web-Based Control:** When connected to F&eIT controllers or servers, the module can be monitored and configured via a standard web browser. - **Industrial Durability:** Fanless, solid-state design with robust connectors and electrostatic protection for reliable operation in industrial environments.

Hersteller: Contec

Kategorie: Contec System

- **16 Optically Isolated Digital Inputs:** Each channel supports both current‑sink and current‑source input types, ensuring compatibility with a wide range of industrial sensors and logic devices. - **12–24 V DC Input Range:** Accepts standard industrial control voltages with ±15 % tolerance. - **Photocoupler Isolation:** Provides galvanic isolation between field wiring and internal logic, protecting host systems from surges and ground loops. - **High Noise Immunity:** Designed for factory environments with compliance to IEC 1000‑4‑4 Level 3 / EN 61000‑4‑4 Level 3 (AC line 2 kV, signal 1 kV). - **Fast Response:** Maximum input response time of 1 ms, suitable for real‑time monitoring and control. - **Compact DIN‑Rail Form Factor:** 25.2 (W) × 64.7 (D) × 94.0 (H) mm, 100 g, enabling dense installation in control panels. - **Stackable F&eIT Bus Interface:** Modules interconnect via a side‑mounted stacking connector with safety lock, eliminating the need for a backplane. - **Automatic Device Recognition:** When connected to F&eIT controllers (e.g., CPU‑CA20(FIT)GY or CPU‑SB20(FIT)GY), the module is automatically detected and configured. - **Interrupt Capability:** All inputs can generate interrupts (IRQ 5/7/9 selectable) for event‑driven applications. - **Extended Cable Length:** Supports signal wiring up to approximately 50 m depending on environment. - **Industrial‑Grade Construction:** Rugged plastic enclosure, vibration‑resistant connectors, and screw‑less terminal plugs for quick wiring. - **Software Integration:** Fully supported by CONTEC’s Windows® API‑CAP(W32) and API‑SBP(W32) driver libraries for Visual C++, Visual Basic, and other Win32 API‑compatible languages. - **Cross‑Platform Communication:** Can be accessed via F&eIT protocol over UDP/IP or through socket communication for Linux and other OS environments.

Hersteller: Contec

Kategorie: Contec System

- **16 Isolated Digital Inputs:** Each input channel supports 36 V DC to 48 V DC logic levels, suitable for industrial sensors, switches, and control signals. - **Ethernet Connectivity:** Standard 10/100 Mbps Ethernet interface for remote monitoring and control over TCP/IP networks. - **Electrical Isolation:** Channel‑to‑channel and channel‑to‑system isolation ensures protection against ground loops, surges, and electrical noise. - **DIN‑Rail Mounting:** Compact, rugged enclosure designed for DIN‑rail installation in control cabinets and industrial panels. - **High Noise Immunity:** Designed for stable operation in electrically noisy environments typical of industrial automation systems. - **Flexible Integration:** Compatible with SCADA, PLC, and PC‑based control systems via standard Ethernet protocols. - **Industrial Temperature Range:** Suitable for continuous operation in demanding environmental conditions. - **LED Channel Indicators:** Each input channel includes a status LED for quick visual diagnostics. - **Compact Form Factor:** Space‑efficient design for dense I/O installations. - **Reliable Power Supply:** Operates from a 36 V DC to 48 V DC power source, matching industrial control voltage standards.

Hersteller: Contec

Kategorie: Contec System

- **32 Opto-Isolated Digital Inputs:** Provides 32 independent digital input channels, each isolated via optocouplers to enhance noise immunity and protect against voltage surges. - **Wide Input Voltage Range:** Accepts 12–24 VDC input signals (±15%), compatible with both current sink and current source output devices. - **High Noise Immunity:** Opto-isolation and hardware digital filtering minimize the effects of electrical noise and signal chattering. - **Digital Filter Function:** Configurable hardware digital filter with selectable time constants (0.25 µs to 131.072 ms) to stabilize input signals. - **Interrupt Functionality:** All input channels can be configured as interrupt sources, with selectable trigger edges (rising or falling). - **Device ID Configuration:** Rotary switch allows assignment of unique Device IDs (0–7) for up to eight modules per controller. - **DIN Rail Mounting:** Standard 35 mm DIN rail mounting for easy installation and modular stacking with other F&eIT modules. - **Ethernet Connectivity via Controller:** Operates as a networked I/O device when connected to CPU-CAxx(FIT)GY controllers, enabling remote monitoring and control over Ethernet. - **Compact and Lightweight Design:** Slim 25.2 mm width and 100 g weight allow dense installation in control panels. - **Industrial-Grade Reliability:** Designed for 0–50°C operation, 10–90% RH humidity, and compliance with IEC/EN industrial noise and vibration standards.

Hersteller: Contec

Kategorie: Contec System

- **Eight optically isolated digital inputs:** Supports 12–24 VDC input range with photocoupler isolation for noise immunity. - **High noise resistance:** Designed to meet IEC1000-4-4 Level 3 / EN61000-4-4 Level 3 standards for industrial environments. - **Compact DIN-rail mountable design:** 25.2 mm (W) × 64.7 mm (D) × 94.0 mm (H), enabling dense installation in control panels. - **Stackable modular architecture:** Connects directly to F&eIT controllers via the F&eIT bus without backplanes. - **Programmable interrupt capability:** Each input can generate interrupts (IRQ5, IRQ7, or IRQ9) for event-driven control. - **Hardware digital filter:** Configurable input filtering (0.25 µs to 131.072 ms) to suppress noise and contact bounce. - **LED status indicators:** Eight green LEDs display input channel states for easy diagnostics. - **Device ID rotary switch:** Allows assignment of unique IDs (0–7) for up to eight modules per controller. - **Wide environmental tolerance:** Operates from 0–50°C, 10–90% RH (non-condensing). - **Industrial-grade reliability:** Opto-isolation, surge protection, and robust mechanical design ensure long-term stability.

Hersteller: Contec

Kategorie: Contec System

- **Dual 16-channel I/O configuration:** Provides 16 opto-isolated digital inputs (12–24 V DC) and 16 opto-isolated digital outputs (12–48 V DC). - **Optical isolation:** Each channel is electrically isolated via optocouplers, ensuring high noise immunity and protection against ground loops. - **Flexible power domains:** Separate external power supplies can be used for each common pin group, allowing mixed-voltage operation. - **High-current open collector outputs:** Capable of sinking up to 150 mA per channel at 24 V DC or 50 mA at 48 V DC. - **Digital filtering:** Built-in hardware digital filter (programmable 0.25 µs–131 ms) suppresses noise and contact chattering on input lines. - **Interrupt capability:** All input channels can be configured as interrupt sources with selectable rising or falling edge triggers. - **Stackable modular design:** Connects laterally to controller modules (CPU-CAxx(FIT)GY or CPU-SBxx(FIT)GY) without a backplane, simplifying system expansion. - **DIN-rail mounting:** Standard 35 mm DIN rail clip for quick installation. - **Device ID rotary switch:** Hardware rotary selector (0–7) for easy module addressing. - **Web and API control:** Supports direct I/O access, memory-mapped control, Windows drivers, and web-based configuration via SVR-MMF2(FIT). - **Industrial-grade reliability:** Designed for 0–50 °C operation, 10–90 % RH humidity, and compliance with IEC/EN industrial EMC standards.

Hersteller: Contec

Kategorie: Contec System

- **4‑in/4‑out Digital I/O:** Provides four opto‑isolated input channels and four opto‑isolated open‑collector output channels per module. - **Wide Voltage Range:** Inputs accept 12–24 V DC; outputs support 12–48 V DC operation. - **Optical Isolation:** Each channel is optically isolated to improve noise immunity and protect control circuitry from voltage transients. - **Flexible Input Compatibility:** Accepts both current‑sink and current‑source type external devices. - **High‑Sink Output Capability:** Each output channel can sink up to 150 mA at 24 V DC or 50 mA at 48 V DC. - **DIN‑Rail Mounting:** Standard 35 mm DIN‑rail mounting mechanism for quick installation and modular stacking. - **Device ID Rotary Switch:** Hardware rotary switch for assigning unique device IDs (0–7) for up to eight modules per controller. - **LED Indicators:** Green LEDs for input status (X0–X3) and red LEDs for output status (Y0–Y3) provide clear visual feedback. - **Digital Filtering:** Built‑in hardware digital filter configurable from 0.25 µs to 131 ms to suppress noise and contact bounce. - **Interrupt Control:** Supports interrupt generation on input signal transitions (rising/falling edges) when used with compatible controllers. - **Web‑Based Monitoring:** When connected to SVR‑MMF(FIT)GY or SVR‑MMF2(FIT) servers, I/O status can be monitored and configured via a standard web browser. - **Stackable Modular Design:** Modules connect laterally to controller units without a backplane, simplifying system expansion. - **High Reliability:** Designed for industrial environments with robust EMC, vibration, and shock resistance.

Hersteller: Contec

Kategorie: Contec System

- **Optically Isolated I/O:** Eight photocoupler‑isolated inputs and eight photocoupler‑isolated open‑collector outputs ensure electrical isolation between field devices and control electronics, improving noise immunity and safety. - **Wide Voltage Range:** Supports 12 V DC to 24 V DC (±15%) for both input and output circuits, accommodating a variety of industrial sensors and actuators. - **Compact DIN‑Rail Design:** 25.2 mm (W) × 64.7 mm (D) × 94.0 mm (H) form factor allows dense installation in control panels. - **High Reliability:** Designed for industrial environments with resistance to line noise (IEC 1000‑4‑4 Level 3 / EN 61000‑4‑4 Level 3) and operation from 0 °C to 50 °C. - **Stackable F&eIT Bus Architecture:** Modules can be stacked side‑by‑side with other F&eIT device modules without a backplane, simplifying system expansion. - **Interrupt Capability:** All input channels can generate interrupts (IRQ 5/7/9 selectable), enabling event‑driven control. - **Fast Response:** Typical input and output response time ≤ 1 ms. - **DIN‑Rail One‑Touch Mounting:** Integrated 35 mm DIN‑rail clip allows quick installation and removal. - **Screw‑less Connectors:** Phoenix Contact plug‑in terminals simplify wiring and maintenance. - **Compact and Lightweight:** Only 100 g, ideal for distributed or embedded control systems. - **Compatibility:** Fully compatible with CONTEC microcontrollers (CPU‑SBxx(FIT)GY), I/O controllers (CPU‑CAxx(FIT)GY), and server units (SVR‑IOA, SVR‑MMF).

Hersteller: Contec

Kategorie: Contec System

- **Ethernet Connectivity:** The DIO-8/8H(FIT) communicates via Ethernet, enabling remote digital I/O control and monitoring over standard TCP/IP networks. This allows integration into SCADA, PLC, and PC-based automation systems. - **Opto-Isolated I/O Channels:** Eight optically isolated input channels and eight optically isolated open-collector output channels provide galvanic isolation between field wiring and internal logic, protecting the host system from surges and ground loops. - **High Voltage Range (36–48 V DC):** Designed for industrial environments, the module supports high-voltage digital signals, making it suitable for factory automation, process control, and equipment monitoring. - **DIN Rail Mounting:** The compact housing includes a 35 mm DIN rail mounting mechanism for easy installation in control panels or enclosures. - **Noise Immunity and Reliability:** Optical isolation and robust circuit design ensure stable operation in electrically noisy environments. - **Modular Expansion:** The FIT series modules can be combined with CONTEC’s USB or Ethernet base units (e.g., DIO-8/8(USB)GY) to expand I/O capacity without additional host interfaces. - **Status Indicators:** Front-panel LEDs display link status, input activity, and output states for quick diagnostics. - **Compact and Lightweight:** The small form factor (approx. 50.4 × 64.7 × 94 mm) and low weight (~100 g) allow dense installation in limited spaces. - **Industrial-Grade Design:** Operating temperature range of 0–50 °C and humidity tolerance of 10–90 % RH (non-condensing) ensure reliable performance in industrial environments.

Hersteller: Contec

Kategorie: Contec System

- **8-Channel Digital I/O (TTL Level):** Provides eight channels that can be configured as digital inputs or outputs, supporting standard TTL voltage levels for direct interfacing with logic circuits, sensors, and actuators. - **Ethernet Connectivity:** Equipped with a 10/100BASE-TX Ethernet interface, enabling remote control and monitoring over standard TCP/IP networks. - **Compact DIN Rail Design:** Slim, lightweight form factor suitable for DIN rail installation in control cabinets or distributed I/O systems. - **Flexible I/O Configuration:** Each channel can be individually configured as input or output, allowing versatile use in mixed-signal environments. - **High-Speed Digital Communication:** Supports fast response times suitable for real-time control and data acquisition applications. - **Industrial Reliability:** Designed for continuous operation in industrial environments, with robust electrical isolation and surge protection. - **Remote I/O Operation:** Enables distributed control architectures by allowing I/O expansion over Ethernet without the need for local PCI or USB interfaces. - **Software Integration:** Compatible with Contec’s software libraries and drivers for Windows and Linux, supporting easy integration into SCADA, PLC, and custom control systems. - **Low Power Consumption:** Optimized for energy-efficient operation, suitable for embedded and remote installations. - **Status Indicators:** LED indicators for power, communication, and channel status provide clear visual feedback for diagnostics and maintenance.

Hersteller: Contec

Kategorie: Contec System

- **16 Optically Isolated Outputs:** Sixteen independent open‑collector outputs (current sink type) with photocoupler isolation ensure electrical separation between control logic and field wiring, improving noise immunity and protecting host systems. - **Wide Output Voltage Range:** Supports 12 V DC to 48 V DC ± 15 %, accommodating a broad range of industrial control voltages. - **High Output Current Capability:** Each channel can drive up to 150 mA at 12–24 V DC or 50 mA at 36–48 V DC, suitable for direct control of relays, solenoids, and indicator lamps. - **Fast Response:** Typical response time of 1 ms (max), enabling real‑time control in automation and data acquisition systems. - **DIN‑Rail Mountable Compact Form:** 25.2 (W) × 64.7 (D) × 94.0 (H) mm housing with one‑touch DIN‑rail mounting mechanism for easy installation in control panels. - **Stackable F&eIT Bus Interface:** Designed for side‑by‑side stacking with compatible controller modules (CPU‑SBxx, CPU‑CAxx, SVR‑MMF, etc.) without backplanes, using CONTEC’s F&eIT bus connector and safety lock. - **Industrial‑Grade Isolation:** Photocoupler isolation between logic and field circuits minimizes ground loops and enhances noise resistance. - **Flexible System Integration:** Operates as a device module within Ethernet‑based or USB‑based remote I/O systems, controlled by CONTEC micro‑controllers or I/O controllers. - **Screw‑less Connector Interface:** Uses Phoenix Contact‑type detachable connectors for quick wiring and maintenance. - **Compact, Lightweight Design:** Only 100 g, ideal for distributed or embedded installations. - **High Reliability:** Designed for 0–50 °C operation, 10–90 % RH non‑condensing, and compliance with IEC 1000‑4‑4 Level 3 noise immunity.

Hersteller: Contec

Kategorie: Contec System

- **32‑Channel Isolated Digital Output:** Provides 32 optically isolated open‑collector outputs (current sink type) for controlling external devices such as relays, solenoids, and indicators. - **Wide Output Voltage Range:** Supports 12 V DC to 48 V DC (±15 %) external circuit power supply. - **High Output Current Capability:** Up to 150 mA per channel at 12–24 V DC or 50 mA per channel at 36–48 V DC. - **Optical Isolation:** Photocoupler isolation between logic and field circuits enhances noise immunity and protects the controller from surges and ground potential differences. - **DIN‑Rail Mounting:** Standard 35 mm DIN‑rail one‑touch mounting mechanism for quick installation and removal. - **Stackable F&eIT Bus Connection:** Simple lateral stacking connection without a backplane; up to eight device modules can be combined per controller (total current ≤ 3 A). - **Compact and Lightweight:** 25.2 mm (W) × 64.7 mm (D) × 94.0 mm (H), 100 g. - **High Noise Immunity:** Conforms to IEC 1000‑4‑4 Level 3 / EN 61000‑4‑4 Level 3 (AC line 2 kV, signal 1 kV). - **Programmable Control:** Fully supported by CONTEC’s Windows® driver libraries (API‑SBP(W32), API‑CAP(W32)) and compatible with Visual C++, Visual Basic, and other Win32 API‑based environments. - **Web‑Based Monitoring:** When used with F&eIT I/O Controllers and Monitoring & Control Servers, output states can be monitored and controlled via a standard web browser without additional programming. - **Industrial Reliability:** Fanless, solid‑state design with opto‑isolation, surge protection, and robust mechanical construction for 0–50 °C operation.

Hersteller: Contec

Kategorie: Contec System

- **Eight Opto-Isolated Digital Outputs:** Provides eight independent open-collector output channels, each isolated via photocouplers to ensure electrical separation and noise immunity. - **Wide Output Voltage Range:** Supports 12 V DC to 48 V DC (±15%) external circuit power supply, suitable for a broad range of industrial control voltages. - **High Output Current Capability:** Each channel can drive up to 150 mA at 12–24 V DC or 50 mA at 36–48 V DC. - **Fast Response:** Output response time within 1 ms, ensuring real-time control performance. - **DIN Rail Mounting:** Compact 25.2 mm (W) × 64.7 mm (D) × 94.0 mm (H) housing with one-touch DIN rail mounting for easy installation and maintenance. - **Stackable F&eIT Bus Connection:** Simple side-by-side stacking connection with safety lock eliminates the need for a backplane, allowing up to eight modules per controller. - **Optical Isolation:** Photocoupler isolation between I/O and logic circuits enhances noise resistance and protects against voltage surges. - **LED Status Indicators:** Red LEDs indicate output ON/OFF status for each channel. - **Device ID Rotary Switch:** Hardware rotary switch (0–7) for easy module identification and addressing. - **Surge Protection:** Built-in zener diode protection on output transistors; external surge suppression recommended for inductive loads. - **Software Integration:** Fully supported by CONTEC’s Windows driver libraries (API-SBP(W32), API-CAP(W32)) and compatible with F&eIT protocol for Ethernet-based control. - **Industrial Reliability:** Designed for 0–50 °C operation, 10–90% RH humidity, and compliance with IEC/EN61000-4-4 Level 3 noise immunity standards.

Hersteller: Contec

Kategorie: Contec System

- **Ethernet‑to‑GPIB Conversion:** Converts between IEEE‑488.1/488.2 GPIB and 10BASE‑T Ethernet interfaces, enabling LAN‑based control of legacy instrumentation. - **Remote Control Capability:** Allows a Windows PC to operate GPIB instruments as if locally connected, using the supplied API‑RPGPIB(W32) driver. - **Single‑Channel GPIB Interface:** Supports one GPIB channel with full 8‑bit parallel data transfer and 3‑line handshake. - **LED Status Indicators:** Front‑panel LEDs (POWER, LISTEN, TALK, SRQ, ERROR, ACT, LINK) provide real‑time visual feedback of communication and operational status. - **Rotary ID Switch:** Hardware rotary switch for device address selection (0–15), with software‑configurable addressing up to 0–30. - **MODE Switch:** Selects operational modes including remote control, reset, and firmware update. - **Utility Software:** Bundled Windows utility for device detection, configuration, firmware updates, and status monitoring. - **DIN‑Rail Mounting:** Standard 35 mm DIN‑rail clip for industrial installation; optional tabletop or Velcro mounting. - **Opto‑Isolated Error Output:** Provides open‑collector error signaling for integration with external monitoring systems. - **Firmware Upgradable:** Supports firmware updates via LAN or dedicated update mode. - **Comprehensive Software Support:** Includes Win32 API library for Visual C++/Visual Basic, sample programs, and driver installation tools. - **Wide OS Compatibility:** Supports Windows 98/Me/2000/XP/Vista environments. - **Compact and Lightweight:** Designed for embedded or rack‑mounted instrumentation systems.

Hersteller: Contec

Kategorie: Contec System

- **Wide‑Range AC Input:** Accepts 85 – 264 VAC, enabling global use with both 100 V and 230 V mains systems. - **Regulated DC Output:** Provides a stable 5 V DC output suitable for powering F&eIT controllers, servers, and device modules. - **High Output Current:** Rated for up to 3 A continuous output current, supporting multiple stacked modules within the 3 A total system limit. - **Compact Industrial Form Factor:** Designed for DIN‑rail mounting within control panels; dimensions match other F&eIT modules for seamless integration. - **High Reliability:** Built for continuous industrial operation with wide environmental tolerance (0 – 50 °C, 10 – 90 % RH). - **Noise Immunity:** Meets IEC 1000‑4‑4 Level 3 / EN 61000‑4‑4 Level 3 standards for line and signal noise resistance. - **Safety and Grounding:** D‑type (former Class 3) grounding ensures stable operation in electrically noisy environments. - **Lightweight and Maintenance‑Free:** Compact, convection‑cooled design with no moving parts. - **Compatibility:** Fully compatible with F&eIT Series controllers (CPU‑SBxx, CPU‑CAxx, SVR‑IOAxx, SVR‑MMF, SVR‑SEC, etc.) and device modules. - **Global Compliance:** Designed to meet CE and FCC Class A requirements for industrial equipment.

Hersteller: Contec

Kategorie: Contec System

- **Wide Input Range:** Accepts 85 V DC to 264 V DC input, allowing flexible deployment in global industrial power environments. - **Regulated Output:** Provides a stable 5 V DC output suitable for powering F&eIT controllers, servers, and device modules. - **Compact Industrial Design:** Shares the F&eIT mechanical form factor (approx. 52.4 × 64.7 × 94 mm), enabling DIN‑rail mounting alongside other system components. - **High Reliability:** Designed for continuous operation in industrial control panels, with noise immunity compliant to IEC 1000‑4‑4 Level 3 / EN 61000‑4‑4 Level 3. - **Thermal and Environmental Robustness:** Operates from 0 °C to 50 °C and 10 – 90 % RH (non‑condensing). - **Safety and EMC Compliance:** Meets CE and FCC Class A requirements for industrial equipment. - **Integration with F&eIT Series:** Optimized for powering CONTEC’s CPU‑SBxx(FIT)GY microcontrollers, CPU‑CAxx(FIT)GY I/O controllers, SVR‑IOA(FIT)GY assist servers, and SVR‑MMF(FIT)GY monitoring servers. - **DIN‑Rail Mounting Mechanism:** One‑touch installation/removal for easy maintenance. - **Lightweight Construction:** Approximately 150 g, minimizing load on control panels. - **Maintenance‑Free Operation:** Fanless, convection‑cooled design ensures silent and reliable performance.

Hersteller: Contec

Kategorie: Contec System

- **Wide AC Input Range:** Accepts 85 to 132 VAC, suitable for standard 100 V AC industrial mains. - **Stable 5 VDC Output:** Provides 5.0 V ± 5 % regulated DC output for logic‑level and embedded devices. - **High Output Current:** Delivers up to 3.0 A continuous current, sufficient for multiple stacked F&eIT modules (total load ≤ 3 A). - **Compact DIN‑Rail Form Factor:** 52.4 (W) × 64.7 (D) × 94.0 (H) mm housing matches the mechanical profile of other F&eIT components for seamless panel integration. - **Lightweight Construction:** Only 150 g, minimizing load on DIN‑rail assemblies. - **Industrial Reliability:** Designed for 0 – 50 °C operation, 10 – 90 % RH (non‑condensing), and compliance with IEC 1000‑4‑4 Level 3 / EN 61000‑4‑4 Level 3 noise‑immunity standards. - **Front‑Access Connectors:** Two‑piece removable power connector with FG (ground) terminal simplifies wiring and maintenance. - **System Compatibility:** Provides the standard 5 VDC bus voltage required by all F&eIT controllers, servers, and device modules. - **Safety and EMC Compliance:** Meets CE and FCC Class A requirements for industrial environments. - **Maintenance‑Free Design:** Fanless, convection‑cooled operation ensures silent, dust‑resistant performance.

Hersteller: Contec

Kategorie: Contec System

- **Wide Input Range:** Accepts 85 – 264 V AC, supporting both 100 V and 240 V mains environments without manual switching. - **Stable 5 V DC Output:** Provides a regulated 5 V DC output with ±5 % tolerance, rated at 3.0 A maximum continuous current. - **Compact DIN‑Rail Design:** 25.2 mm (W) × 64.7 mm (D) × 94.0 mm (H) housing enables installation in confined control panels. - **Optimized for F&eIT Systems:** Designed to power CONTEC’s F&eIT microcontrollers, I/O controllers, servers, and device modules. - **Industrial Reliability:** Built to withstand industrial noise levels (IEC 1000‑4‑4 Level 3 / EN 61000‑4‑4 Level 3) and environmental conditions typical of factory automation. - **Lightweight Construction:** Weighs only 110 g, minimizing load on DIN rails and simplifying integration in distributed systems. - **High Efficiency and Low Heat:** Fanless operation with natural convection cooling ensures silent, maintenance‑free performance. - **Safety and Compliance:** Meets CE and FCC Class A standards for industrial electronic equipment. - **Plug‑and‑Play Integration:** Compatible with all F&eIT modules through standardized 5 V DC connectors and stackable bus architecture. - **Extended Operating Range:** Operates reliably from 0 °C to 50 °C and 10 – 90 % RH (non‑condensing).

Hersteller: Contec

Kategorie: Contec System

- **Dedicated Power Source for RP‑COM and F&eIT Devices:** Supplies regulated 5 V DC power to RP‑COM(FIT)GY, RP‑422(FIT)GY, RP‑GPIB(FIT)GY, and other F&eIT modules. - **Compact Industrial Design:** Ultra‑small form factor (approx. 52.4 × 64.7 × 94 mm) suitable for DIN‑rail mounting in control panels or embedded systems. - **High Reliability:** Designed for continuous industrial operation with wide input voltage tolerance and noise immunity compliant with IEC1000‑4‑4 Level 3. - **Flexible Input Options:** Available in both AC‑DC and DC‑DC configurations to accommodate various installation environments. - **Stable 5 V DC Output:** Provides up to 3 A continuous current (model‑dependent) for powering multiple stacked device modules. - **Seamless Integration:** Fully compatible with CONTEC’s F&eIT Bus architecture, enabling simple stacking and modular expansion without backplanes. - **DIN‑Rail Mounting Mechanism:** Standard 35 mm DIN‑rail clip allows quick installation and removal using a flat‑head screwdriver. - **Industrial‑Grade Environmental Tolerance:** Operates from 0 °C to 50 °C with 10–90 % RH non‑condensing humidity range. - **Safety and Compliance:** Meets CE and FCC Class A standards for industrial environments.

Hersteller: Contec

Kategorie: Contec System

- **Dedicated Power Source for RP‑COM:** Supplies regulated DC power to RP‑COM(FIT)GY and related communication modules. - **Compact Industrial Design:** Matches the F&eIT Series form factor (DIN‑rail mountable, 94 mm height × 64.7 mm depth) for uniform installation. - **High Reliability:** Designed for continuous industrial operation with wide input voltage tolerance and noise immunity compliant with IEC1000‑4‑4 Level 3. - **Flexible Input Options:** Available in both AC‑DC and DC‑DC configurations to suit various installation environments. - **Stable 5 V DC Output:** Provides regulated 5 V DC ± 5 % output for powering F&eIT modules, controllers, and servers. - **Safety and Compliance:** Meets CE and FCC Class A standards for industrial electronic equipment. - **DIN‑Rail Mounting Mechanism:** Enables quick installation and removal using a standard 35 mm DIN rail. - **Lightweight and Space‑Saving:** Designed for compact control panels and embedded systems. - **Interoperability:** Fully compatible with F&eIT Bus architecture, ensuring seamless power distribution to stacked device modules. - **Industrial Durability:** Operates in environments from 0 °C to 50 °C with humidity up to 90 % RH (non‑condensing).

Hersteller: Contec

Kategorie: Contec System

- **Wide Input Range:** Accepts 10 to 30 V DC, suitable for 12 V and 24 V industrial power systems. - **Stable 5 V DC Output:** Provides a regulated 5 V DC ± 5 % output with a maximum current of 3 A, ensuring stable operation of connected F&eIT modules. - **DIN‑Rail Mountable:** Compact housing with integrated 35 mm DIN‑rail clip for quick installation in control panels or equipment racks. - **High Reliability:** Designed for continuous industrial operation with low noise, high isolation, and robust protection against line disturbances. - **Compact Form Factor:** 52.4 (W) × 64.7 (D) × 94.0 (H) mm, enabling dense installation alongside other F&eIT components. - **Lightweight Construction:** Approximately 150 g, minimizing mechanical load on DIN rails. - **Optimized for F&eIT Systems:** Provides the standard 5 V DC bus voltage required by CONTEC’s modular controllers and device modules. - **Industrial‑Grade Environmental Tolerance:** Operates from 0 to 50 °C and 10 to 90 % RH (non‑condensing). - **Noise Immunity:** Meets IEC 1000‑4‑4 Level 3 / EN 61000‑4‑4 Level 3 standards (AC line 2 kV, signal line 1 kV). - **Safety Grounding:** D‑type (former Class 3) ground terminal for stable reference and noise suppression.

Hersteller: Contec

Kategorie: Contec System

- **Wide DC Input Range:** Accepts 30 – 50 V DC, suitable for industrial and field power environments. - **Stable 5 V DC Output:** Provides a regulated 5 V DC ± 5 % output with a maximum current of 3 A, ideal for powering multiple F&eIT modules. - **Compact DIN‑rail Form Factor:** 25.2 (W) × 64.7 (D) × 94.0 (H) mm housing allows easy integration into control panels. - **High Reliability:** Designed for continuous industrial operation with wide temperature and humidity tolerance. - **Noise Immunity:** Meets IEC 1000‑4‑4 Level 3 / EN 61000‑4‑4 Level 3 standards for line and signal noise resistance. - **Safety and Grounding:** D‑type (former Class 3) grounding ensures stable operation in noisy environments. - **Seamless Integration:** Fully compatible with CONTEC’s F&eIT microcontrollers, I/O controllers, servers, and device modules. - **Maintenance‑Free Operation:** Fanless, solid‑state design with no moving parts. - **DIN‑rail Mounting Mechanism:** Quick installation and removal using a flat‑head screwdriver. - **Lightweight Construction:** Approximately 100 g, minimizing load on DIN‑rail assemblies.

Hersteller: Contec

Kategorie: Contec System

- **Four Independent Temperature Channels:** Supports simultaneous measurement on four Pt100 or JPt100 RTD sensors. - **High Accuracy and Resolution:** 0.01 °C resolution with ±0.15 °C accuracy (15–35 °C ambient) or ±0.3 °C (0–50 °C ambient). - **Wide Measurement Range:** - Pt100: –200 °C to +850 °C - JPt100: –200 °C to +510 °C - **Selectable Wiring:** Compatible with both 3‑wire and 4‑wire RTD configurations. - **Digital Linearization:** Internal linearization compensates for the nonlinear resistance‑temperature relationship of RTDs. - **Averaging and Filtering:** Time‑ or count‑based averaging and a 50/60 Hz digital noise filter (at 150 ms conversion) for stable readings. - **Disconnection Detection:** Per‑channel open‑circuit detection with LED error indication. - **Offset and Gain Calibration:** User‑programmable correction values stored in onboard flash memory (100,000 write cycles). - **Alarm Output Function:** Programmable upper/lower threshold alarms with latch and non‑latch modes. - **High‑Speed Conversion:** Selectable conversion speeds of 150 ms, 40 ms, or 5 ms per channel. - **Compact DIN‑Rail Design:** 25.2 (W) × 64.7 (D) × 94.0 (H) mm, 100 g, stackable without a backplane. - **Industrial‑Grade Isolation:** Photocoupler isolation between sensor inputs and power supply for noise immunity. - **Integration Flexibility:** Operates with CONTEC CPU‑SBxx(FIT)GY microcontrollers, CPU‑CAxx(FIT)GY I/O controllers, or SVR‑MMF(FIT)GY monitoring servers. - **Software Support:** Fully supported by CONTEC’s Windows® driver libraries (API‑SBP(W32), API‑CAP(W32), API‑USBP(WDM)) and F&eIT protocol for Ethernet communication. - **Web‑Based Monitoring:** When used with SVR‑MMF(FIT)GY, data can be viewed and managed via a standard web browser.

Hersteller: Contec

Kategorie: Contec System

- **Ethernet Connectivity:** Provides network-based control of four independent relay outputs via standard Ethernet communication protocols. - **Four Isolated Reed Relay Outputs:** Each output channel is electrically isolated, ensuring safe and interference-free operation in multi-channel control systems. - **High Switching Capacity:** Supports up to **125 VAC** or **30 VDC** at **2 A** per channel, suitable for controlling small motors, solenoids, indicators, and other low-power devices. - **DIN Rail Mounting:** Compact industrial design for easy installation in control panels and enclosures. - **Galvanic Isolation:** Electrical isolation between channels and communication interface enhances system reliability and protects against voltage surges. - **Industrial Reliability:** Designed for continuous operation in demanding environments, with robust construction and stable performance. - **Remote Control and Monitoring:** Enables remote actuation of devices through Ethernet, ideal for distributed I/O systems and SCADA integration. - **Compact Form Factor:** Space-saving design suitable for dense control cabinets or modular automation setups. - **Low Power Consumption:** Efficient circuitry minimizes heat generation and energy use. - **Manufacturer Support:** Backed by Contec’s industrial automation expertise and global support network.

Hersteller: Contec

Kategorie: Contec System