- **Processor:** Atmel ATSAMA5D35 ARM Cortex‑A5 MPU, 536 MHz, with MMU and VFPv4 floating‑point unit. - **Memory:** 512 MB LPDDR2 SDRAM, 8 GB eMMC Flash, and 8 MB DataFlash for system backup. - **Networking:** Dual Ethernet interfaces — one Gigabit (Micrel KSZ9031RNXCA) and one 10/100 Mbps (Micrel KSZ8081RNAIA) with onboard transformers and 1.5 kV isolation. - **Serial Communication:** Four UARTs (up to 921.6 kbps) with hardware/software flow control; two CAN 2.0A/B interfaces. - **USB:** Two USB 2.0 high‑speed (480 Mbps) host ports and one USB device/console port. - **Expansion Interfaces:** SPI (4 chip selects), I²C, I²S (TX/RX), SD 2.0/SDHC, and 21 GPIO pins. - **Power Efficiency:** Single 5 V DC input, typical consumption 

Manufacturer: Artila

Category: SBC Modules

- **Processor:** Atmel ATSAMA5D35 ARM Cortex‑A5 MPU, 536 MHz, with MMU and VFPv4 floating‑point unit. - **Memory:** 512 MB LPDDR2 SDRAM, 8 GB eMMC Flash, and 8 MB DataFlash for system backup. - **Operating System:** Linux kernel 4.9.x with EXT4 file system and Barebox bootloader. - **Networking:** Dual Ethernet interfaces — one Gigabit (Micrel KSZ9031RNXCA) and one 10/100 Mbps (Micrel KSZ8081RNAIA). - **Interfaces:** SPI, I²C, I²S, UART × 4, CAN × 2, USB 2.0 Host × 2, SD 2.0 (SDHC), GPIO × 21. - **Power Efficiency:** Single 5 V DC input, typical consumption 0.75 W (

Manufacturer: Artila

Category: SBC Modules

- **Processor:** ARM Cortex‑A7 core (ATMEL/Microchip i.MX6ULL) optimized for low‑power embedded computing. - **Operating System:** Pre‑installed **Linux Kernel 4.14.x**, supporting standard GNU/Linux utilities and development environments. - **Memory Configuration:** - **512 MB LPDDR3 SDRAM** for high‑speed system memory. - **4 GB eMMC Flash** for OS and application storage. - **16 MB DataFlash** for bootloader and configuration data. - **Connectivity Interfaces:** - **4 × UART ports** (921.6 kbps each) with full hardware flow control (RTS/CTS). - **2 × USB 2.0** host/device ports. - **2 × 10/100 Mbps Ethernet** interfaces for dual‑LAN or redundant networking. - **8 × GPIO** (General Purpose Input/Output) lines for digital control and monitoring. - **Power Efficiency:** Operates on **5 V DC**, consuming **less than 1 W**, ideal for fanless and battery‑powered systems. - **Compact Form Factor:** **63 mm × 43 mm**, enabling integration into space‑constrained designs. - **Industrial Reliability:** Designed for continuous operation in industrial environments, supporting extended temperature ranges and stable long‑term supply. - **OEM‑Ready Design:** Provides a ready‑to‑integrate embedded computing core for custom carrier boards or system designs.

Manufacturer: Artila

Category: SBC Modules

M-X6ULL with CB-X6ULL carrier board with power circuitry, Ethernet, Serial port, USB, CAN, SD socket, mini-PCIe socket, 9..48VDC, Artila

Manufacturer: Artila

Category: SBC Modules

- **Optimized for 4G/LTE Networks:** Designed to operate across standard LTE frequency bands, ensuring compatibility with global cellular networks. - **High-Gain External Antenna:** Provides improved signal strength and stability, particularly in areas with weak cellular coverage. - **Industrial-Grade Construction:** Built with durable materials suitable for harsh environments, including outdoor and industrial installations. - **Flexible Mounting Options:** Supports magnetic, adhesive, or screw-mount configurations for versatile deployment. - **Extended Cable Assembly:** Includes a pre-terminated coaxial cable for easy connection to Artila devices or other compatible modems. - **Plug-and-Play Integration:** Fully compatible with Artila’s embedded systems and communication modules, requiring minimal configuration. - **Low VSWR (Voltage Standing Wave Ratio):** Ensures efficient power transfer and minimal signal loss. - **Weather-Resistant Design:** Suitable for both indoor and outdoor use, with protection against moisture, dust, and UV exposure. - **Compact Form Factor:** Streamlined design allows installation in constrained spaces without compromising performance. - **Enhanced Data Throughput:** Supports high-speed LTE data transmission for bandwidth-intensive applications such as video streaming, telemetry, and remote diagnostics.

Manufacturer: Artila

Category: Accessories

- **Purpose-Built for Matrix-512:** Designed and tested for compatibility with Artila’s Matrix-512 embedded system, ensuring seamless console communication. - **DB9F-to-DB9F Configuration:** Both ends feature **9-pin female D-sub connectors**, enabling direct connection to devices with male DB9 serial ports. - **High-Quality Construction:** Durable molded connectors and strain reliefs enhance mechanical stability and reduce wear during repeated use. - **Standard RS-232 Serial Interface:** Supports standard RS-232 signaling for console communication, device configuration, and serial data exchange. - **1-Meter Cable Length:** Provides sufficient reach for desktop or rack-mounted setups while minimizing signal degradation. - **Plug-and-Play Operation:** No drivers or software required; simply connect to compatible serial ports for immediate operation. - **Shielded Cable Design:** Internal shielding minimizes electromagnetic interference (EMI) and ensures signal integrity in electrically noisy environments. - **Versatile Application:** Suitable for console access, firmware updates, diagnostics, and serial communication between embedded systems, routers, or industrial controllers.

Manufacturer: Artila

Category: Accessories

- **Purpose-Built for Matrix-512:** Designed and tested by Artila for seamless integration with the Matrix-512 embedded computer. - **DB9F to DB9F Configuration:** Both ends feature standard **DB9 female connectors**, enabling direct connection to devices with DB9 male console or serial ports. - **100 cm Cable Length:** Provides sufficient reach for flexible installation and convenient access during configuration or maintenance. - **High-Quality Construction:** Built with durable materials to ensure long-term reliability in industrial and embedded environments. - **Stable Serial Communication:** Ensures consistent RS-232 signal transmission between the Matrix-512 and external devices. - **Plug-and-Play Operation:** No additional drivers or software required; simply connect to the console port for immediate use. - **Compact and Lightweight:** Easy to handle, store, and deploy in space-constrained installations. - **Official Artila Accessory:** Guaranteed compatibility and performance when used with Artila Matrix series products.

Manufacturer: Artila

Category: Accessories

- **Purpose-built for iPAC-50XX Series:** Designed specifically to connect the internal 10-pin serial port header of Artila’s iPAC-50XX controllers to external RS-232 devices. - **DB9 Male Connector:** Provides a standard RS-232 interface compatible with a wide range of serial peripherals such as modems, sensors, PLCs, and industrial instruments. - **10-pin IDC Header Interface:** Connects directly to the controller’s onboard serial port header, ensuring secure and correct pin alignment. - **Flat Ribbon Cable Construction:** Offers flexibility, compact routing, and easy installation within control panels or enclosures. - **Short 0.20 m Length:** Minimizes signal loss and electromagnetic interference (EMI) while maintaining sufficient reach for internal wiring. - **High Signal Integrity:** Designed for stable RS-232 communication with proper shielding and grounding through the DB9 connector. - **Plug-and-Play Compatibility:** No additional configuration required; simply connect the cable between the controller and the external device. - **Industrial-Grade Reliability:** Manufactured by Artila, known for robust embedded and industrial communication solutions.

Manufacturer: Artila

Category: Accessories

- **Purpose-Built Console Cable:** Designed for console communication between Artila embedded systems and standard RS-232 serial interfaces. - **Connector Type:** Wafer Box connector (board-side) to DB9 Female connector (host-side). - **Cable Length:** 50 cm (0.5 meters), providing optimal reach for rack-mounted or embedded installations. - **High Compatibility:** Fully compatible with Artila’s Matrix and PAC series devices, including Matrix-505/605, M-502/503/9G45A, and PAC-4000/4010/4070. - **Reliable Signal Transmission:** Ensures stable serial communication for configuration, monitoring, and maintenance. - **Compact and Flexible Design:** Short cable length minimizes clutter and signal degradation while maintaining flexibility for installation in tight spaces. - **Durable Construction:** Built with high-quality materials to withstand industrial environments and frequent connection cycles. - **Plug-and-Play Operation:** No additional drivers or software required; supports standard RS-232 communication protocols. - **Secure Connection:** Precision-molded connectors ensure firm mating and consistent electrical contact. - **OEM and Field Service Ready:** Ideal for system integrators, OEMs, and maintenance engineers requiring dependable console access.

Manufacturer: Artila

Category: Accessories

- **Purpose-Built for Matrix-5xx Series:** Designed to provide console connectivity for Artila’s Matrix-5xx embedded computing platforms, ensuring full compatibility and reliable communication. - **RJ45 to DB9F Interface:** Converts the RJ45 console port on the Matrix-5xx device to a standard DB9 female serial interface, allowing connection to PCs, laptops, or serial terminals. - **High-Quality Construction:** Manufactured with durable materials and precision-molded connectors to ensure long-term reliability in industrial and embedded environments. - **1-Meter Cable Length:** Provides sufficient reach for desktop or rack-mounted setups while minimizing signal degradation. - **Plug-and-Play Operation:** No external power or drivers required; supports direct serial communication through standard RS-232 signaling. - **Compatibility Note:** Specifically designed for Matrix-5xx models except Matrix-504, Matrix-518, and Matrix-522, which use different console interfaces. - **Color-Coded and Labeled Connectors:** Simplifies installation and identification in multi-device environments. - **Compact and Flexible Design:** Facilitates easy cable routing in confined spaces typical of embedded or industrial control cabinets.

Manufacturer: Artila

Category: Accessories

- **Purpose-Built for Matrix-5xx Series:** Engineered for seamless integration with Artila’s Matrix-5xx embedded computers, ensuring full compatibility and optimal signal integrity. - **Interface Conversion:** Converts an **RJ45 serial port** to a **DB9 female** connector, enabling connection to standard RS-232 serial devices. - **High-Quality Construction:** Manufactured with durable materials to withstand industrial conditions, ensuring long-term reliability and consistent performance. - **1.5-Meter Cable Length:** Provides sufficient reach for flexible equipment placement while minimizing signal degradation. - **Plug-and-Play Design:** No additional configuration required—simply connect to the Matrix-5xx RJ45 serial port and the target DB9 device. - **Secure Connection:** Precision-molded connectors ensure a tight, stable fit, reducing the risk of accidental disconnection or signal loss. - **Versatile Application:** Suitable for serial communication with modems, PLCs, sensors, industrial controllers, and other RS-232-compatible devices. - **Optimized Signal Transmission:** Shielded cable design minimizes electromagnetic interference (EMI) and cross-talk, ensuring stable data communication. - **Compact and Lightweight:** Designed for embedded and space-constrained environments where cable management and reliability are critical.

Manufacturer: Artila

Category: Accessories

- **Purpose-Built for Matrix Series:** Specifically engineered for Artila Matrix-500, Matrix-504, Matrix-510, Matrix-514, and Matrix-520 embedded computers. - **Interface Conversion:** Converts an RJ45 console port to a DB9 female (DB9F) serial connector, enabling direct connection to standard RS-232 serial ports on PCs or terminal devices. - **High Signal Integrity:** Ensures stable serial communication with minimal signal loss or interference, suitable for industrial and embedded applications. - **Compact 1-Meter Length:** Provides optimal reach for desktop or rack-mounted setups without excessive cable clutter. - **Plug-and-Play Operation:** No additional drivers or configuration required; supports direct serial communication for console access. - **Durable Construction:** Built with high-quality materials for long-term reliability in industrial environments. - **Universal Compatibility:** Works with any device requiring an RJ45-to-DB9F serial console connection, though optimized for Artila Matrix systems. - **Ease of Maintenance:** Facilitates firmware updates, system configuration, and troubleshooting through direct console access.

Manufacturer: Artila

Category: Accessories

- **Complete Mounting Solution:** Supplied as a set containing two DIN rail adapters and four screws, providing all necessary components for immediate installation. - **Universal DIN Rail Compatibility:** Designed to fit standard 35 mm DIN rails (commonly referred to as “Top Hat” rails, type TS35), ensuring compatibility with a wide range of industrial and electrical enclosures. - **Durable Construction:** The adapters are made from high-quality, impact-resistant grey polymer material, offering mechanical stability and long-term durability in demanding environments. - **Corrosion-Resistant Hardware:** Includes four V2A (AISI 304) stainless-steel screws, providing excellent resistance to corrosion, oxidation, and environmental wear. - **Compact and Lightweight Design:** Optimized for minimal space usage within control cabinets while maintaining secure attachment strength. - **Ease of Installation:** Simple screw-based mounting system allows quick attachment and removal without specialized tools. - **Versatile Application Range:** Suitable for mounting small enclosures, terminal blocks, power supplies, relays, PLC modules, and other DIN rail-compatible devices. - **Reliable Mechanical Support:** Ensures stable fixation of devices under vibration, temperature variation, and mechanical stress conditions typical in industrial environments. - **Standardized Dimensions:** Conforms to DIN EN 60715 rail dimensions, ensuring universal fit and interchangeability.

Manufacturer: Artila

Category: Accessories

GPS Antenna /Wire, Artila

Manufacturer: Artila

Category: Accessories

- **Wide Input Voltage Range:** Operates from 100 V AC to 240 V AC, 50/60 Hz, supporting global use within EU‑compatible regions. - **Stable 12 V DC Output:** Provides a regulated 12 V DC output with a maximum continuous current of 1 A (12 W total power). - **EU Plug Type:** Integrated Europlug (Type C or Type F, depending on variant) for direct use in European power outlets. - **Compact and Lightweight Design:** Optimized for minimal space usage and easy portability. - **High Efficiency Conversion:** Designed with switch‑mode power supply (SMPS) technology for efficient AC‑DC conversion and reduced heat generation. - **Overload and Short‑Circuit Protection:** Built‑in safety mechanisms protect both the adapter and connected devices. - **Over‑Voltage and Over‑Current Protection:** Ensures stable output and prevents damage to sensitive electronics. - **Low Ripple and Noise:** Provides clean DC output suitable for sensitive electronic circuits. - **Energy‑Efficient Operation:** Meets or exceeds typical energy efficiency standards for external power supplies. - **Universal Application:** Suitable for routers, LED lighting, CCTV cameras, small appliances, and other 12 V DC devices.

Manufacturer: Artila

Category: Accessories

- **Compact Half Mini PCIe Form Factor:** Designed for space-constrained embedded systems, compatible with standard Mini PCIe slots. - **Integrated Wireless Connectivity:** Provides IEEE 802.11b/g/n Wi-Fi functionality for high-speed wireless networking. - **High Data Throughput:** Supports data rates up to 150 Mbps (single-stream 802.11n) for efficient data transmission. - **Enhanced Range and Stability:** Includes external antenna and wire assembly to ensure optimal signal strength and coverage. - **Industrial Reliability:** Built for continuous operation in embedded and industrial environments with extended temperature tolerance. - **Flexible Integration:** Compatible with a wide range of embedded boards, single-board computers (SBCs), and industrial PCs. - **Low Power Consumption:** Optimized for energy-efficient operation, suitable for battery-powered or low-power embedded devices. - **Plug-and-Play Interface:** Standard PCI Express Mini Card interface simplifies installation and integration. - **Driver Support:** Compatible with major operating systems such as Linux, Windows, and embedded RTOS platforms. - **Secure Wireless Communication:** Supports WPA/WPA2 encryption and advanced security protocols for protected data transmission.

Manufacturer: Artila

Category: Accessories

- **Fanless Design:** The ACS-2101 employs a completely fanless thermal solution, ensuring silent operation and eliminating mechanical wear associated with moving parts. This design enhances reliability and reduces maintenance requirements. - **VIA Eden 733 MHz CPU:** Powered by the VIA Eden processor, the system offers a balance between performance and energy efficiency, ideal for embedded and industrial control applications. - **Memory Support:** One 168-pin SDRAM DIMM slot supporting up to 512 MB of system memory, allowing sufficient capacity for lightweight operating systems and embedded applications. - **Storage Options:** Provides space for a 2.5-inch HDD or SSD and includes one CompactFlash (CF) slot for solid-state storage or system boot media. - **Comprehensive I/O Connectivity:** - 2 × USB 2.0 ports for peripheral connectivity - 1 × 10/100 Mbps LAN port for network communication - 3 × RS-232 serial ports for legacy device integration - 1 × configurable RS-232/422/485 serial port for flexible industrial communication protocols - **Wide Power Input Range:** Operates from 11 to 28 VDC, supporting a variety of industrial power environments. An optional 230 VAC adapter is available for standard power sources. - **Compact and Rugged Construction:** With dimensions of 225 × 170 × 58 mm, the ACS-2101 is designed for space-constrained installations and can be easily integrated into control cabinets or kiosks. - **Industrial-Grade Reliability:** Designed for continuous operation in demanding environments, with robust components and passive cooling for extended service life.

Manufacturer: Aplex

Category: IPC Embedded System

- **Fanless Design:** Passive cooling architecture eliminates moving parts, reducing maintenance and improving reliability in harsh or dusty environments. - **Intel® Celeron® M 1 GHz Processor:** Provides stable performance for embedded and industrial control applications. - **Intel® 852GM Chipset:** Integrated graphics controller with VGA output for display connectivity. - **Memory Support:** One DDR266 SO-DIMM socket supporting up to 1 GB SDRAM. - **Dual PCI Expansion Slots:** Two standard PCI slots for additional interface cards, data acquisition modules, or communication controllers. - **Comprehensive I/O Connectivity:** - 3 × COM ports (serial interfaces) - 4 × USB 2.0 ports - 1 × 10/100 Mbps LAN port - 1 × PS/2 keyboard and mouse port - Audio I/O: Microphone, Line-in, Line-out - **Storage Options:** Space for one 2.5" HDD and one slim-type CDRW drive. - **Wide DC Power Input Range:** 11 VDC to 28 VDC input, with optional 230 VAC adapter for flexible deployment. - **Rugged Construction:** Heavy-duty steel chassis ensures durability and mechanical stability. - **Compact Form Factor:** Designed for wall-mount installation in space-constrained environments. - **Operating Temperature Range:** 0 °C to 50 °C (operating), -10 °C to 75 °C (storage). - **Compliance:** Meets CE and FCC Class A standards for electromagnetic compatibility and safety.

Manufacturer: Aplex

Category: IPC Embedded System

- **Processor:** Intel Pentium 4, 2.4 GHz – a proven single-core processor architecture optimized for embedded and industrial computing tasks. - **Chipset:** Intel 845GV – supports DDR266 SDRAM and integrated graphics, ensuring stable performance for industrial applications. - **Memory:** Supports up to 1 GB DDR266 SDRAM, allowing sufficient memory capacity for control, monitoring, and data processing tasks. - **Storage:** 1 × 2.5" HDD bay for compact hard disk installation, providing reliable data storage in vibration-prone environments. - **Optical Drive:** Integrated slim-type CDRW drive for data backup, software installation, and media access. - **Expansion Slots:** 2 × PCI slots for additional I/O cards, communication interfaces, or specialized industrial controllers. - **I/O Interfaces:** - 2 × COM ports (RS-232/422/485 configurable depending on configuration) - 2 × USB ports for peripheral connectivity - 1 × LAN port for Ethernet networking - **Power Supply:** Wide-range AC input (100–240 VAC), supporting global deployment and stable operation under varying power conditions. - **Compact Design:** Dimensions of 360 × 90 × 212.5 mm (410 × 95 mm with wall mount kit), optimized for space-constrained installations. - **Weight:** 3.4 kg, lightweight yet robust for industrial mounting. - **Mounting Options:** Wall-mount kit available, enabling flexible installation in control cabinets or on machinery. - **Industrial Reliability:** Designed for continuous operation in industrial environments, with stable thermal management and durable construction.

Manufacturer: Aplex

Category: IPC Embedded System

- **Fanless Industrial Design:** The ACS-2622 employs a fully fanless thermal solution, utilizing passive heat dissipation through its aluminum chassis. This design minimizes moving parts, improving durability and reliability in harsh environments. - **Intel® Celeron® M 1.5 GHz Processor (Optional Pentium® M 1.8 GHz):** Offers a balance between performance and power efficiency, suitable for embedded and industrial control applications. - **Intel® 855GME + ICH4 Chipset:** Provides stable platform support for legacy and modern interfaces, ensuring compatibility with a wide range of industrial peripherals. - **Flexible Expansion:** Two standard PCI slots allow integration of additional I/O, communication, or control cards, enabling system customization for specific industrial tasks. - **Comprehensive Connectivity:** Includes 2×COM ports, 4×USB 2.0 ports, 1×LAN port, 1×VGA, and 1×DVI output for versatile peripheral and display connections. - **Storage Options:** Supports one 2.5″ HDD, one slim-type CDRW optical drive, and one internal CompactFlash (CF) slot for solid-state storage or embedded OS deployment. - **Wide DC Power Input Range:** Operates from 11 VDC to 28 VDC, suitable for industrial power systems; optional 230 VAC adapter available for standard mains operation. - **Compact and Rugged Construction:** Designed for space-constrained installations, with robust mechanical design and wall-mount capability. - **Industrial Reliability:** Engineered for 24/7 operation, with extended temperature tolerance and vibration resistance typical of industrial-grade systems.

Manufacturer: Aplex

Category: IPC Embedded System

- **Fanless Design:** Passive cooling architecture eliminates moving parts, reducing maintenance and improving reliability in dusty or vibration-prone environments. - **Intel® Celeron® M Processor:** Standard configuration with 1.5 GHz CPU; optional upgrade to Pentium® M 1.8 GHz for enhanced performance. - **Chipset:** Intel® 855GME + ICH4 chipset combination, providing stable platform support for embedded applications. - **Memory Support:** 1 × SDRAM slot supporting up to 1 GB system memory. - **Comprehensive I/O Connectivity:** - 2 × COM ports for serial communication - 4 × USB 2.0 ports for peripheral connectivity - 1 × LAN (10/100 Mbps Ethernet) for network access - 1 × VGA and 1 × DVI output for dual-display capability - 1 × PS/2 port for keyboard and mouse - 1 × Audio interface (Mic-in, Line-in, Line-out) - **Storage Options:** Internal space for 1 × 2.5" HDD and 1 × slim-type CDRW drive. - **Expansion Capability:** 2 × PCI slots for additional interface or control cards. - **Power Flexibility:** Wide-range DC input (11 – 28 VDC) with optional 230 VAC adapter for versatile deployment. - **Rugged Construction:** Steel chassis ensures durability and electromagnetic shielding. - **Mounting Options:** Wall-mountable design for space-constrained or fixed installations. - **Certifications:** CE and FCC Class A compliance for industrial and commercial environments.

Manufacturer: Aplex

Category: IPC Embedded System

- **Processor Options:** Equipped with an Intel Celeron M 1.5 GHz processor, with optional upgrade to Intel Pentium M 1.8 GHz for enhanced performance. - **Chipset:** Utilizes the Intel 855GME + ICH4 chipset, ensuring stable performance and compatibility with legacy and modern interfaces. - **Memory Support:** One DDR SDRAM slot supporting up to 1 GB of system memory, allowing efficient multitasking for industrial control applications. - **Storage Flexibility:** - One 2.5" HDD bay for standard hard disk drives. - One CompactFlash (CF) slot for solid-state storage or embedded OS deployment. - One slim-type optical drive bay supporting CD-RW drives for data backup or software installation. - **I/O Connectivity:** - Two serial COM ports for RS-232/422/485 communication. - Four USB 2.0 ports for peripheral connectivity. - One LAN port for Ethernet networking. - One VGA and one DVI output for dual-display support. - **Expansion Capability:** Two PCI expansion slots for additional interface cards or specialized controllers. - **Power Supply:** Wide-range AC input (100–240 VAC) for global compatibility and stable operation. - **Compact Design:** Industrial-grade enclosure with dimensions of 390 × 100.196 × 212.5 mm (410 × 105.1 mm with wall-mount kit). - **Mounting Options:** Wall-mountable design for flexible installation in control cabinets, kiosks, or machinery housings. - **Industrial Reliability:** Designed for 24/7 operation, with robust thermal management and durable construction.

Manufacturer: Aplex

Category: IPC Embedded System

- **Processor Options:** Supports Intel Celeron M 1.5 GHz (standard configuration) and optional Intel Pentium M up to 1.8 GHz for enhanced performance. - **Chipset:** Intel 855GME + ICH4 chipset combination, providing stable platform support for embedded and industrial applications. - **Memory Support:** One DDR SDRAM slot supporting up to 1 GB of system memory, ensuring adequate performance for control, monitoring, and data acquisition tasks. - **Storage Flexibility:** - One 2.5-inch HDD bay for internal storage. - One slim-type CDRW drive bay for optical media. - One CompactFlash (CF) slot for solid-state storage or embedded OS deployment. - **I/O Connectivity:** - 2 × COM ports for serial communication (RS-232/422/485 depending on configuration). - 4 × USB 2.0 ports for peripheral connectivity. - 1 × LAN port for Ethernet networking. - 1 × VGA and 1 × DVI output for dual-display support. - **Expansion Capability:** Two PCI expansion slots for additional interface cards or specialized modules. - **Power Supply:** Wide-range AC input (100–240 VAC), suitable for global deployment and industrial power environments. - **Compact Design:** Industrial-grade enclosure with dimensions of 390 × 100.196 × 212.5 mm (410 × 105.1 mm with wall mount kit). - **Mounting Options:** Wall-mountable design for flexible installation in control cabinets, kiosks, or machinery housings.

Manufacturer: Aplex

Category: IPC Embedded System

- **Fanless Architecture:** Passive cooling system for silent, maintenance‑free operation and enhanced reliability in dusty or vibration‑prone environments. - **Intel® Celeron® M Processor (up to 2 GHz):** Efficient CPU providing stable performance for industrial control, data acquisition, and embedded computing tasks. - **Compact Box PC Design:** Small form factor suitable for DIN‑rail, wall, or panel mounting in control cabinets or kiosks. - **Industrial‑Grade Durability:** Designed for extended temperature ranges, shock resistance, and continuous operation. - **Low Power Consumption:** Optimized for energy efficiency, reducing heat output and power requirements. - **Flexible I/O Connectivity:** Typically includes multiple USB, serial (RS‑232/422/485), Ethernet, and display interfaces for integration with sensors, PLCs, and HMIs. - **Solid‑State Storage Support:** Compatible with CompactFlash or SSD storage for vibration‑resistant data retention. - **Wide Input Voltage Range:** Supports industrial DC power input (commonly 9–36 V DC) for flexible deployment. - **Maintenance‑Free Operation:** No fans or mechanical drives, minimizing downtime and service intervals. - **Long‑Term Availability:** Industrial lifecycle support ensures consistent supply and compatibility for OEM and system integrator projects.

Manufacturer: Aplex

Category: IPC Embedded System

- **Processor:** Intel Core 2 Duo CPU, 2.0 GHz clock speed, optimized for multitasking and industrial computing workloads. - **Chipset:** Intel 945GM + ICH7M chipset combination, providing stable platform support and extended lifecycle availability. - **Memory:** Two DDR2 SO-DIMM slots supporting 533/667 MHz memory modules, with a maximum capacity of 4 GB. - **Storage Options:** - One internal 2.5-inch HDD bay for SATA hard drives or SSDs. - One slim-type optical drive bay supporting CDRW/DVD-ROM drives. - **Expansion Slots:** Two PCI expansion slots for additional interface cards, communication modules, or specialized controllers. - **I/O Interfaces:** - 3 × COM ports (RS-232/422/485 configurable depending on system configuration). - 4 × USB 2.0 ports for peripheral connectivity. - 2 × Gigabit Ethernet (GbE) LAN ports for high-speed network communication and redundancy. - 1 × VGA output for external display connection. - **Power Supply:** - Standard AC input: 100–240 VAC. - Optional DC input: 16–36 VDC (via 19 V adapter). - **Cooling System:** Active cooling with integrated fan for stable thermal performance under continuous operation. - **Construction:** Rugged metal chassis designed for industrial environments, ensuring mechanical stability and EMI protection. - **Mounting Options:** Wall-mountable design with optional wall mount kit. - **Compact Form Factor:** Space-efficient enclosure suitable for control cabinets or confined installation spaces.

Manufacturer: Aplex

Category: IPC Embedded System