- **High‑density I/O:** 32 isolated digital inputs and 32 isolated digital outputs, providing a total of 64 channels in a single 3U CompactPCI slot. - **Rear I/O configuration:** Designed for rear I/O connectivity through the CompactPCI backplane, enabling clean front‑panel cable management and improved system reliability. - **High isolation protection:** 5000 V RMS channel‑to‑system isolation, protecting host computers from high‑voltage transients and ground loops. - **Wide input voltage range:** Accepts 0–24 V DC input signals (non‑polarity), suitable for industrial sensors and logic devices. - **High output drive capability:** Open‑collector Darlington transistor outputs capable of sinking up to 500 mA per channel at 24 V DC. - **Common ground or common power configuration:** Supports both configurations depending on system requirements. - **Rugged industrial design:** 3U Eurocard form factor compliant with PICMG 2.0 R2.1 CompactPCI standards. - **High reliability:** Optical isolation for all channels, protecting against noise and transient surges. - **Interrupt support:** Two external interrupt sources (channels 0 and 1) for event‑driven applications. - **Software compatibility:** Drivers and SDKs for Windows 7/8.1 x86/x64 and Linux; supports LabVIEW®, MATLAB®, C/C++, Visual Basic, and Visual Studio .NET. - **Diagnostic LEDs:** Four user‑programmable LEDs for status indication and debugging. - **Comprehensive software tools:** Includes AD‑Logger utility and PCIS‑DASK driver library for rapid development.

Manufacturer: Adlink Technology Inc.

Category: DIO Isolated PXI/PXIe/cPCI

- **32 Isolated Digital Inputs and 32 Isolated Digital Outputs:** Provides symmetrical I/O configuration for versatile control and monitoring applications. - **High Isolation Voltage:** 5000 V RMS channel‑to‑system isolation ensures protection against high‑voltage transients and ground loops. - **Source Current Output Capability:** Each output channel can source up to 500 mA at 24 V DC, suitable for driving relays, solenoids, and actuators. - **Rear I/O Configuration:** Designed for CompactPCI systems with rear I/O access via J2 connector, enabling clean front‑panel integration and improved cable management. - **Rugged Industrial Connector:** 100‑pin SCSI‑II female connector for reliable signal integrity and mechanical robustness. - **Wide Input Voltage Range:** Accepts 5 V – 24 V DC non‑polarized input signals, compatible with a variety of industrial sensors and logic levels. - **High Output Drive Capability:** Darlington transistor array outputs with common power configuration for high‑current sourcing. - **Dual Interrupt Sources:** Two external interrupt inputs (channels 0 and 1) for event‑driven control and real‑time response. - **Comprehensive Software Support:** Drivers and SDKs available for Windows 7/8.1 (x86/x64) and Linux, with APIs for LabVIEW®, MATLAB®, C/C++, Visual Basic, and Visual Studio .NET. - **Utility Software:** AD‑Logger for data acquisition and monitoring. - **CompactPCI Compliance:** Fully compliant with PICMG 2.0 R2.1, ensuring interoperability with standard CompactPCI backplanes.

Manufacturer: Adlink Technology Inc.

Category: DIO Isolated PXI/PXIe/cPCI

Compact PCI bus isolated Digital IO card, 64DI, rugged 100pin SCSI-II connector, 100*160mm, Adlink

Manufacturer: Adlink Technology Inc.

Category: DIO Isolated PXI/PXIe/cPCI

- **64 Isolated Digital Input Channels:** Provides 64 optically isolated digital input channels for robust signal acquisition in noisy or high‑voltage environments. - **High Isolation Voltage:** 2500 Vrms channel‑to‑system isolation ensures protection against transient voltages and ground loops. - **Rear I/O Configuration:** Rear I/O interface via CompactPCI J2 connector, eliminating front‑panel cabling and enabling high‑density system integration. - **3U CompactPCI Form Factor:** Fully compliant with PICMG 2.0 R2.1 CompactPCI specifications. - **Rugged 100‑pin SCSI‑II Connector:** Industrial‑grade connector for reliable signal transmission and mechanical stability. - **Wide Input Voltage Range:** Accepts 0–24 V DC input signals (logic H: 5–24 V, logic L: 0–1.5 V). - **Optical Isolation:** Protects host systems from high‑voltage transients and eliminates ground loop interference. - **Dual Interrupt Sources:** Supports two external interrupt sources on digital input channels 0 and 1 for event‑driven applications. - **High Throughput:** Supports up to 10 kHz input sampling rate (0.1 ms response). - **Software Support:** Compatible with ADLINK’s PCIS‑DASK driver library and utilities for Windows 7/8.1 x86/x64 and Linux. - **SDK Integration:** Supports LabVIEW®, MATLAB®, Visual C/C++, Visual Basic, and .NET environments. - **Diagnostic LEDs:** Four user‑programmable LEDs for status indication and debugging. - **Geographic Addressing:** Slot number readable from CompactPCI backplane for system identification. - **Industrial‑Grade Design:** Operating temperature 0 °C – 60 °C, humidity 5 – 95 % RH non‑condensing.

Manufacturer: Adlink Technology Inc.

Category: DIO Isolated PXI/PXIe/cPCI

Compact PCI bus isolated Digital IO card, 64DO, rugged 100pin SCSI-II connector, 100*160mm, Adlink

Manufacturer: Adlink Technology Inc.

Category: DIO Isolated PXI/PXIe/cPCI

- **64 Isolated Digital Output Channels:** Provides 64 independent, optically isolated digital output channels for high‑density control applications. - **Source Current Output Type:** Uses transistor source configuration (TD62783 devices) for sourcing current to external loads. - **High Isolation Voltage:** 5000 V RMS channel‑to‑system isolation ensures protection against high‑voltage transients and ground loops. - **High Output Drive Capability:** Each channel can source up to 500 mA at 24 V DC; all channels ON simultaneously can source 260 mA per channel. - **Wide Output Voltage Range:** Supports 5 V DC minimum to 35 V DC maximum output voltage. - **CompactPCI 3U Eurocard Form Factor:** Fully compliant with PICMG 2.0 R2.1 CompactPCI specification. - **Rugged 100‑Pin SCSI‑II Connector:** Provides a single, high‑density interface for all I/O channels. - **Optical Isolation:** Protects host systems from voltage surges and eliminates ground loop interference. - **Software Support:** Compatible with Windows 7/8.1 (x86/x64) and Linux; drivers and SDKs available for LabVIEW®, MATLAB®, C/C++, Visual Basic, and Visual Studio .NET. - **Utility Software:** Includes AD‑Logger for data monitoring and testing. - **High Reliability:** Designed for industrial environments with operating temperature range 0 °C – 60 °C and humidity up to 95 % non‑condensing. - **Comprehensive SDK:** Supports PCIS‑DASK, LabVIEW, HP‑VEE, DAQBench ActiveX, ISaGRAF, InControl, and OPC Server integration.

Manufacturer: Adlink Technology Inc.

Category: DIO Isolated PXI/PXIe/cPCI

- **64 Isolated Digital Output Channels:** Provides 64 optically isolated digital output channels for industrial control and automation. - **High Isolation Voltage:** 5000 V RMS channel‑to‑system isolation ensures protection against high‑voltage transients and ground loops. - **Rear I/O Configuration:** Designed for rear I/O access via CompactPCI backplane, enabling clean front‑panel integration and cable management. - **Common Ground Configuration:** All output channels share a common ground reference, simplifying wiring for standard industrial loads. - **High Output Drive Capability:** Each output channel can sink up to 500 mA at 24 V DC, suitable for driving relays, solenoids, and indicators. - **Wide Output Voltage Range:** Supports 5 V DC minimum to 35 V DC maximum output voltage. - **Optical Isolation:** Protects host systems from voltage spikes, surges, and noise interference. - **CompactPCI Compliance:** Fully compliant with PICMG 2.0 R2.1 CompactPCI specification, 3U Eurocard form factor. - **Rugged Industrial Connector:** 100‑pin SCSI‑II female connector for secure, high‑density signal interfacing. - **Software Support:** Compatible with Windows 7/8.1 x86/x64 and Linux; drivers and SDKs available for LabVIEW®, MATLAB®, C/C++, Visual Basic, and Visual Studio .NET. - **Diagnostic LEDs:** Four user‑programmable LEDs for system status indication and debugging. - **Geographic Addressing:** Supports CompactPCI slot number identification via backplane geographic addressing. - **High Reliability:** Designed for continuous operation in industrial environments with extended temperature and humidity tolerance.

Manufacturer: Adlink Technology Inc.

Category: DIO Isolated PXI/PXIe/cPCI

- **64 isolated digital output channels** with common power configuration (source current type). - **Rear I/O interface** via a 100‑pin SCSI‑II female connector for compact system integration. - **High isolation voltage:** 5000 V RMS channel‑to‑system isolation for maximum protection. - **High output drive capability:** - Source current up to **500 mA per channel** (single channel ON). - **260 mA per channel** when all channels are ON at 24 V. - **Wide output voltage range:** 5 V DC minimum to 35 V DC maximum. - **Common power configuration:** all outputs share a single external power source (VDD). - **3U CompactPCI form factor**, compliant with **PICMG 2.0 R2.1**. - **Rear I/O signaling** through J2 connector; no front‑panel I/O connectors. - **Rugged design** with optical isolation to protect host systems from high voltages and ground loops. - **Plug‑and‑Play PCI configuration** using the PLX PCI‑9050 controller, fully compliant with PCI 2.1. - **Software support:** Windows 7/8.1 x86/x64 and Linux drivers; compatible with LabVIEW®, MATLAB®, C/C++, Visual Basic, and Visual Studio .NET. - **Utility software:** AD‑Logger for data monitoring and testing. - **High reliability:** designed for continuous operation in industrial environments (0 °C – 60 °C).

Manufacturer: Adlink Technology Inc.

Category: DIO Isolated PXI/PXIe/cPCI

- **High‑Density I/O:** 256 total channels — 128 isolated digital inputs and 128 isolated digital outputs. - **Electrical Isolation:** 2500 V RMS channel‑to‑system isolation ensures protection against voltage surges and ground loops. - **Wide Input Range:** Non‑polarity digital input range up to 28 V DC, allowing flexible interfacing with various sensors and switches. - **Wide Output Range:** Open‑collector Darlington transistor outputs supporting 5 V to 35 V DC external supply, suitable for driving relays, solenoids, and indicators. - **High Sink Current Capability:** Up to 300 mA per channel continuous sink current at 100 % duty cycle. - **Change‑of‑State (COS) Interrupts:** Programmable COS detection on all 128 input channels for event‑driven data acquisition. - **Output Readback:** Real‑time digital output status readback for verification and diagnostics. - **Watchdog Timer:** Onboard 32‑bit watchdog timer with programmable overflow interval (1 s – 4500 s) to ensure system reliability. - **Board ID Function:** DIP‑switch selectable board identification (0–15) for multi‑card systems. - **Software & Driver Support:** - **Operating Systems:** Windows 7/Vista/XP/2000/2003 Server, Linux, Windows CE (on request). - **Drivers:** PCIS‑DASK (Windows), PCIS‑DASK/X (Linux), DAQPilot (Windows/LabVIEW), DAQ‑MTLB (MATLAB). - **Development Tools:** VB.NET, VC.NET, Delphi, BCB, DAQBench, AD‑Logger. - **CompactPCI Compliance:** Fully compliant with PICMG 2.0 R3.0 standard for mechanical and electrical interoperability.

Manufacturer: Adlink Technology Inc.

Category: DIO Isolated PXI/PXIe/cPCI

- **High-Density I/O:** Up to 64 isolated digital input or output channels per board. - **Electrical Isolation:** Up to 5000 Vrms channel-to-computer isolation (2500 Vrms for certain models). - **Multiple Configurations:** - PCI-7432: 32 DI + 32 DO - PCI-7433: 64 DI - PCI-7434: 64 DO - cPCI-7432/33/34: 3U CompactPCI versions - cPCI-7434P/7434R/7434RP: Common power or common ground configurations with rear I/O options. - **High Output Drive Capability:** Up to 500 mA sink current per channel. - **Input Protection:** 24 V DC input protection and transient suppression. - **Interrupt Support:** Dual interrupt triggers on digital input channels 0 and 1. - **Connector Interface:** 100-pin SCSI-II type connector for all models. - **Plug-and-Play PCI Compliance:** Fully compliant with PCI Local Bus Specification Rev. 2.1 using PLX PCI-9050 controller. - **Software Support:** Comprehensive driver suite for Windows 95/98/NT/2000, DOS, and integration with LabVIEW®, HP VEE™, DASYLab™, InTouch™, InControl™, ISaGRAF™, and OPC Server environments. - **Rear I/O Support:** Available on CompactPCI 743XR variants with optional transition boards (DB‑100RU). - **Onboard Isolated Power:** +5 V DC isolated output (150–200 mA). - **High Reliability:** Designed for industrial environments with optical isolation and noise immunity.

Manufacturer: Adlink Technology Inc.

Category: DIO Isolated PXI/PXIe/cPCI

- **64 Opto-Isolated Digital Inputs:** Provides 64 independent digital input channels, each isolated from the system bus to prevent ground loops and electrical interference. - **Positive Common Configuration:** Each group of 16 inputs shares a positive common line, simplifying wiring for sensors and switches using a common positive voltage. - **Wide Input Voltage Range:** Accepts input signals from +12 to +24 VDC, suitable for standard industrial logic levels. - **High Isolation Voltage:** 1 kVrms isolation between input channels and the CompactPCI bus ensures protection against surges and electrical noise. - **CompactPCI Bus Interface:** Fully compliant with the CompactPCI (cPCI) standard, supporting 32-bit, 33 MHz operation. - **High Reliability Opto-Couplers:** Utilizes high-speed, high-reliability photo-couplers for signal isolation and noise suppression. - **Compact Form Factor:** Short-size PCI board dimensions (176 mm × 107 mm) allow installation in space-constrained systems. - **Industrial-Grade Design:** Designed for continuous operation in harsh industrial environments with high electrical noise. - **Interrupt Support:** Supports multiple interrupt lines combined into a single interrupt request signal for efficient event handling. - **Software Support:** Compatible with CONTEC’s API-PAC(W32) library and drivers for Windows and Linux, enabling easy integration into custom applications.

Manufacturer: Contec

Category: DIO Isolated PXI/PXIe/cPCI

- **CompactPCI Bus Interface:** Fully compliant with the CompactPCI (cPCI) standard, enabling integration into industrial PC systems with cPCI backplanes. - **Opto-Isolated I/O Channels:** 32 isolated digital inputs and 32 isolated digital outputs, each channel isolated by photo-couplers to protect the host system from electrical noise and surges. - **Positive Common Configuration:** Designed for positive common wiring, simplifying integration with industrial sensors and actuators that share a common positive line. - **Wide Input Voltage Range:** Accepts 12 V DC to 24 V DC input signals, compatible with standard industrial logic levels. - **High Output Drive Capability:** Each output channel can sink up to 150 mA at 35 V DC maximum, with a total of 2 A per common line. - **High Isolation Voltage:** 1 kVrms isolation between the PC bus and external I/O circuits ensures reliable operation in electrically noisy environments. - **Compact Form Factor:** Short-size cPCI board (176 mm × 107 mm) suitable for space-constrained industrial systems. - **High Reliability:** Industrial-grade components and design for continuous operation in automation, process control, and data acquisition systems. - **Software Support:** Compatible with CONTEC’s API-PAC(W32) and API-TOOLs for Windows/Linux, providing easy integration with custom applications and third-party environments such as LabVIEW and MATLAB.

Manufacturer: Contec

Category: DIO Isolated PXI/PXIe/cPCI

- **64 Opto-Isolated Digital Output Channels:** Provides 64 independent output points for controlling external devices such as relays, solenoids, and indicators. - **Positive Common Configuration:** Each group of 16 outputs shares a positive common line, simplifying wiring for devices requiring a shared positive voltage. - **High Output Capacity:** Supports up to **35 VDC** output voltage and **150 mA per channel**, with a maximum of **2 A per common group**. - **Optical Isolation:** 1 kVrms isolation between the PC bus and external I/O circuits prevents ground loops and protects the host system from electrical noise and surges. - **CompactPCI Bus Interface:** Fully compliant with the CompactPCI (cPCI) standard, ensuring compatibility with industrial-grade embedded systems and rack-mounted controllers. - **High Reliability and Noise Immunity:** Opto-coupler isolation and robust circuit design ensure stable operation in electrically noisy environments. - **Standard 96-Pin Half-Pitch D-Type Connector:** Provides a compact, high-density interface for external wiring. - **Compact Form Factor:** Short-size cPCI board (176 mm × 107 mm) suitable for space-constrained industrial systems. - **Software Support:** Compatible with CONTEC’s API-PAC(W32) and API-TOOLS for Windows and Linux, enabling easy integration into custom applications. - **Wide Accessory Support:** Compatible with CONTEC’s range of terminal blocks, shielded cables, and DIN-rail adapters for flexible installation.

Manufacturer: Contec

Category: DIO Isolated PXI/PXIe/cPCI

- **High‑Density Digital I/O:** Up to 64 isolated digital input or output channels per board, configurable by model. - PCI‑7432 / cPCI‑7432: 32 DI + 32 DO - PCI‑7433 / cPCI‑7433: 64 DI - PCI‑7434 / cPCI‑7434: 64 DO - **Electrical Isolation:** Up to **5000 Vrms channel‑to‑computer isolation** (2500 Vrms for certain rear I/O variants), protecting host systems from high‑voltage transients and ground loops. - **High Output Drive Capability:** Each output channel can sink up to **500 mA**, supporting inductive loads such as relays and solenoids. - **Wide Input Voltage Range:** Accepts **0–24 V DC** input signals with logic thresholds of 0–1.5 V (Low) and 5–24 V (High). - **High Throughput:** Supports up to **10 kHz (0.1 ms)** update rate for both input and output operations. - **Interrupt Support:** Dual interrupt sources on digital input channels 0 and 1, with external interrupt triggering capability. - **Connector Interface:** Standard **100‑pin SCSI‑II** connector for all models, ensuring compatibility with ADLINK’s DB‑100 series terminal boards. - **Form Factor Options:** Available in **PCI**, **CompactPCI (3U)**, and **CompactPCI with Rear I/O** configurations, including common‑ground and common‑power variants. - **Software Integration:** Comprehensive driver suite supporting Windows 95/98/NT/2000, DOS, and major automation environments (LabVIEW®, HP‑VEE™, DASYLab™, InTouch™, InControl™, ISaGRAF™, OPC). - **Plug‑and‑Play PCI Compliance:** Fully compliant with **PCI Local Bus Specification Rev. 2.1**, using the PLX PCI‑9050 controller for automatic resource assignment.

Manufacturer: Adlink Technology Inc.

Category: DIO Isolated PXI/PXIe/cPCI

- **High-Density I/O:** Up to 64 isolated digital input or output channels per board. - **Isolation Protection:** Up to 5000 Vrms channel-to-computer isolation (2500 Vrms for certain models). - **Flexible Configurations:** Available in PCI, 3U CompactPCI, and CompactPCI with rear I/O form factors. - **High Output Drive Capability:** Each output channel can sink up to 500 mA. - **Wide Input Voltage Range:** Accepts 0–24 VDC input signals with logic thresholds (H: 5–24 V, L: 0–1.5 V). - **High-Speed Operation:** Supports throughput up to 10 kHz (0.1 ms response time). - **Interrupt Support:** Dual interrupt sources on digital input channels 0 and 1. - **Connector Interface:** Standard 100-pin SCSI-II connector for all models. - **Software Integration:** Comprehensive driver support for Windows and DOS environments, including LabVIEW®, HP-VEE™, DASYLab™, InTouch™, InControl™, ISaGRAF™, and OPC. - **Plug-and-Play PCI Configuration:** Automatic resource assignment via BIOS (IRQ and I/O base address). - **Compact Form Factor:** Standard 3U CompactPCI and PCI short card dimensions for space-constrained systems. - **Rear I/O Options:** Rear transition modules available for cPCI-R variants. - **LED Indicators:** User-programmable LEDs on rear I/O models for status indication. - **Robust Design:** Optical isolation, transient suppression, and ESD protection for industrial reliability.

Manufacturer: Adlink Technology Inc.

Category: DIO Isolated PXI/PXIe/cPCI

- **PXI / CompactPCI 3U Form Factor:** Designed for 3U PXI and CompactPCI chassis, ensuring compatibility with standard modular instrumentation systems. - **16 Independent Relay Channels:** Provides 16 individually controlled relay outputs for flexible signal switching and control applications. - **Hot-Swappable Design:** Fully compliant with **PICMG 2.1 R1.0** hot-swap specifications, allowing insertion and removal without powering down the chassis. - **High Switching Capacity:** Each relay supports up to **60 W**, **220 VDC**, or **2 A** maximum load, suitable for both low- and medium-power switching tasks. - **Plug-and-Play Operation:** Automatically recognized by PXI systems for simplified configuration and integration. - **D-Type Connector Interface:** Standard D-type connector for secure and reliable external wiring and signal interfacing. - **Compact Dimensions:** Standard **100 mm × 160 mm** PCB size, optimized for PXI 3U slot installation. - **Industrial-Grade Reliability:** Built for continuous operation in demanding test environments, ensuring long relay life and stable performance. - **Software Integration:** Compatible with PXI system software environments and drivers for easy control and automation.

Manufacturer: Adlink Technology Inc.

Category: DIO Isolated PXI/PXIe/cPCI

- **32 Independent Relay Channels:** Provides 32 individually controlled relay outputs for versatile signal switching and control applications. - **PXI / CompactPCI 3U Form Factor:** Fully compliant with PXI and CompactPCI 3U mechanical and electrical specifications, ensuring compatibility with standard PXI chassis and controllers. - **PICMG 2.1 R1.0 Hot-Swappable Compliance:** Supports hot-swap functionality, allowing insertion and removal without powering down the PXI chassis, minimizing system downtime. - **High Switching Capacity:** Each relay channel supports up to **60 W**, **220 VDC**, or **2 A**, enabling control of moderate power loads and signal lines. - **Plug-and-Play Operation:** Automatically recognized by PXI systems for simplified configuration and integration. - **D-Type Connector Interface:** Equipped with a standard D-type connector for secure and reliable external wiring connections. - **Compact Dimensions:** Standard 3U PXI board size of **100 mm x 160 mm**, optimized for dense system integration. - **Industrial-Grade Reliability:** Designed for long operational life and consistent performance in demanding test environments. - **Flexible Application Support:** Suitable for signal routing, load switching, device simulation, and automated test equipment (ATE) systems.

Manufacturer: Adlink Technology Inc.

Category: DIO Isolated PXI/PXIe/cPCI

- **High-Density Switching:** 60-channel Scan/Multiplexer configuration for efficient signal routing in compact PXI 3U form factor. - **Form A Relays:** Utilizes Form A (normally open) electromechanical relays for reliable signal switching and isolation. - **Wide Bandwidth:** 1 MHz (-3 dB) analog bandwidth supports a broad range of signal frequencies for general-purpose switching. - **PXI/cPCI 3U Compatibility:** Fully compliant with PXI and CompactPCI 3U mechanical and electrical standards, ensuring interoperability with modular test systems. - **Hot-Swappable Design:** Conforms to **PICMG 2.1 R1.0** hot-swap specifications, allowing insertion and removal without system power-down. - **Plug and Play Operation:** Automatic resource detection and configuration through PXI system controller for simplified setup. - **High Power Handling:** Maximum switching capacity of **30 W**, **125 VAC**, **30 VDC**, and **0.5 A**, suitable for low-to-medium power signal routing. - **Compact and Rugged Construction:** 3U PXI form factor with 160-pin 2 mm connector for secure and reliable signal connections. - **Versatile Application Range:** Ideal for automated test equipment (ATE), data acquisition systems, signal routing, and instrumentation switching.

Manufacturer: Adlink Technology Inc.

Category: DIO Isolated PXI/PXIe/cPCI

- **High-Density Switching:** 60-channel Scan/Multiplexer configuration providing extensive signal routing capability within a single 3U PXI slot. - **Form B Relay Architecture:** Utilizes Form B (normally closed) relays for enhanced reliability and signal integrity, suitable for both low-level and moderate power switching. - **PXI / CompactPCI 3U Form Factor:** Fully compliant with PXI and CompactPCI 3U mechanical and electrical specifications, ensuring compatibility with standard PXI chassis and controllers. - **Wide Bandwidth:** 1 MHz (-3 dB) analog bandwidth supports a broad range of signal frequencies, suitable for both DC and low-frequency AC applications. - **Hot-Swappable Design:** Conforms to **PICMG 2.1 R1.0** hot-swap specification, allowing safe insertion and removal without powering down the PXI chassis. - **Plug and Play Operation:** Automatic resource detection and configuration through PXI system software, simplifying integration and reducing setup time. - **High Isolation and Low Crosstalk:** Ensures signal integrity across multiple channels, critical for precision measurement and automated test systems. - **Durable Relay Design:** Mechanical relays rated for long operational life and consistent performance under repeated switching cycles. - **Compact and Modular:** Occupies a single 3U PXI slot, optimizing space utilization in dense test configurations. - **Standardized Connectivity:** Equipped with a **160-pin 2 mm connector** for secure and reliable signal interfacing.

Manufacturer: Adlink Technology Inc.

Category: DIO Isolated PXI/PXIe/cPCI

- **PXI / CompactPCI 3U Form Factor:** Fully compliant with PXI and CompactPCI 3U mechanical and electrical specifications, ensuring compatibility with standard PXI chassis and controllers. - **16-Channel Scan/Multiplexer Configuration:** Provides 16 independent Form A relay channels for flexible signal routing and multiplexing operations. - **Form A Relays:** Utilizes Form A (normally open, single-pole single-throw) electromechanical relays for reliable switching of analog and digital signals. - **High Bandwidth Performance:** Offers a **10 MHz (-3 dB) bandwidth**, enabling accurate signal transmission for a wide range of analog and mixed-signal applications. - **Hot-Swappable Design:** Compliant with **PICMG 2.1 R1.0 Hot Swap** specification, allowing safe insertion and removal of the module without powering down the PXI chassis. - **Plug and Play Operation:** Supports automatic detection and configuration within PXI systems, simplifying integration and reducing setup time. - **High Power Handling:** Rated for **30 W**, **125 VAC**, **30 VDC**, and **0.5 A** maximum switching capacity per channel, suitable for moderate power signal routing. - **Compact and Robust Construction:** Built on a **100 mm x 160 mm** PCB with a **160-pin 2 mm connector**, ensuring secure electrical connections and mechanical stability. - **PXI Trigger and Synchronization Support:** Compatible with PXI trigger bus and timing features for synchronized operation with other PXI modules. - **Industrial-Grade Reliability:** Designed for continuous operation in demanding test environments with long relay life and stable performance.

Manufacturer: Adlink Technology Inc.

Category: DIO Isolated PXI/PXIe/cPCI

- **32-Channel Scan/Multiplexer Configuration:** Provides 32 independent Form A relay channels for flexible signal routing and multiplexing operations. - **Form A Relay Type:** Utilizes single-pole, single-throw (SPST) normally open relays, ensuring reliable mechanical switching and long operational life. - **PXI / CompactPCI 3U Form Factor:** Fully compliant with PXI and CompactPCI 3U mechanical and electrical specifications, enabling integration into standard PXI chassis. - **High Bandwidth Performance:** Offers a **10 MHz (-3 dB) bandwidth**, supporting a wide range of analog and digital signal types without significant signal degradation. - **Hot-Swappable Design:** Compliant with **PICMG 2.1 R1.0** hot-swap specifications, allowing insertion and removal without powering down the PXI chassis. - **Plug and Play Operation:** Supports automatic detection and configuration within PXI systems, simplifying setup and reducing integration time. - **High Power Handling:** Rated for **30 W**, **125 VAC**, or **30 VDC** at **0.5 A**, suitable for moderate power signal switching applications. - **Compact and Durable Construction:** Built on a **100 mm x 160 mm** PCB with a **160-pin 2 mm connector**, ensuring robust connectivity and mechanical stability. - **PXI System Compatibility:** Designed for seamless operation with ADLINK and third-party PXI controllers, chassis, and software environments.

Manufacturer: Adlink Technology Inc.

Category: DIO Isolated PXI/PXIe/cPCI

- **PXI and CompactPCI Compliance:** Fully compliant with PXI Specification Rev. 2.2 and CompactPCI (PICMG 2.0 R3.0) standards, ensuring interoperability with PXI-based test and measurement systems. - **Hot-Swap Support:** Conforms to PICMG 2.1 R2.0 CompactPCI Hot Swap specifications, allowing module replacement without system shutdown. - **16 Independent SPDT Relays:** Each channel provides one Form C (SPDT) contact configuration, enabling flexible switching between normally open (NO) and normally closed (NC) states. - **High Switching Capacity:** Supports up to 3 A switching and carrying current, with maximum ratings of 220 VDC or 250 VAC and 60 W / 50 VA power handling. - **Fast Operation:** Relay operate and release times are ≤5 ms, with bounce time ≤3 ms, supporting up to 125 operations per second. - **Onboard 1K-Sample Scan List:** Enables deterministic scanning and automated relay pattern sequencing with programmable delay and trigger control. - **PXI Trigger and Synchronization:** Supports PXI trigger bus and star trigger for multi-module synchronization without external wiring. - **Safety and Reliability Features:** Includes programmable emergency shutdown, watchdog timer (1 ms–420 s), and relay safety status configuration for fail-safe operation. - **Auxiliary Digital I/O:** Eight 3.3 V/TTL (5 V tolerant) digital I/O lines for general-purpose control and handshaking with external instruments. - **Software Programmability:** Fully software-controlled operation with ADLINK’s ADL-SWITCH driver and API support for Windows platforms. - **Operating System and Software Support:** Compatible with Windows 2000/XP/Vista/2003; supports VB, VC++, BCB, Delphi, and DAQBench environments.

Manufacturer: Adlink Technology Inc.

Category: DIO Isolated PXI/PXIe/cPCI

- **PXI and CompactPCI Compliance:** - PXI Specification Rev. 2.2 compliant - CompactPCI (PICMG 2.0 R3.0) and Hot Swap (PICMG 2.1 R2.0) compliant - **Relay Configuration:** - 24-channel DPDT (2 Form C) non-latching relays - Configurable as 48×1 (1-wire), 24×1 (2-wire), or 12×1 (4-wire) multiplexer - Software-selectable configuration without hardware jumpers - **Switching Performance:** - 2 A switching and carrying current - 220 V DC / 125 V AC maximum switching voltage - 60 W maximum switching power - **Deterministic Scanning:** - Onboard 1 k-sample scan list memory for auto-scan operation - Supports direct-update and auto-scan modes - Programmable scan delay and trigger synchronization - **Synchronization and Triggering:** - PXI trigger bus and star trigger support - Programmable handshaking signals (TRG_IN, S_ADV) - Multiple module synchronization without external wiring - **Safety and Reliability:** - Programmable emergency shutdown function - 32-bit watchdog timer (1 ms to 420 s) - Relay safety status programmable via software - **Software and OS Support:** - Supported OS: Windows 2000, XP, Vista, 2003 - Driver: ADL-SWITCH for Windows - Recommended software: VB, VC++, BCB, Delphi, DAQBench - **Hot-Swap Capability:** - Fully compliant with CompactPCI Hot Swap specifications - Supports Microsoft Embedded XP native hot-swap - **Auxiliary Digital I/O:** - Three 3.3 V/TTL (5 V tolerant) digital I/O lines - Programmable as input/output/tri-state

Manufacturer: Adlink Technology Inc.

Category: DIO Isolated PXI/PXIe/cPCI

- **PXI and CompactPCI Compliance:** Conforms to PXI Specification Rev. 2.2 and CompactPCI PICMG 2.0 R3.0 standards, ensuring interoperability with PXI-based test systems. - **Hot-Swap Capability:** Fully compliant with PICMG 2.1 R2.0 CompactPCI Hot Swap specifications, allowing module replacement without system shutdown. - **Flexible Matrix Configuration:** Default configuration is a 4-group 2x4 2-wire matrix. With the TB-6231-01 terminal board, users can reconfigure to one of several matrix topologies: - 1 × 4x8 - 2 × 4x4 - 1 × 2x16 - 2 × 2x8 - 4 × 2x4 - **Relay Characteristics:** - 32 DPDT (2 Form C) non-latching relays - 2 A switching and carrying current - 220 V DC / 125 V AC maximum switching voltage - 60 W maximum switching power - 100 mΩ maximum contact resistance - 4 ms maximum operate and release time - **Safety and Reliability:** - Programmable emergency shutdown function - 32-bit watchdog timer (1 ms to 420 s range) - Hardware safety status monitoring - **Synchronization and Triggering:** - PXI trigger bus and star trigger support - Programmable handshaking signals for external instrument synchronization - Onboard 1 k-sample scan list for deterministic scanning - **Auxiliary Digital I/O:** - 8 channels of 3.3 V/TTL digital I/O (5 V tolerant) - Dual-function pins for trigger and shutdown control - **Software and Driver Support:** - ADL-SWITCH driver for Windows 98/ME/NT/2000/XP/Vista/2003 - Compatible with VB, VC++, BCB, Delphi, and DAQBench - **Safety-Critical Design:** Designed for industrial and laboratory automation systems requiring deterministic control and fail-safe operation.

Manufacturer: Adlink Technology Inc.

Category: DIO Isolated PXI/PXIe/cPCI

- **High-Density Digital I/O:** Supports up to 64 isolated digital input or output channels depending on model configuration. - **Optical Isolation:** Up to 5000 Vrms channel-to-computer isolation (2500 Vrms for certain models), protecting host systems from high-voltage transients and ground loops. - **Flexible Configurations:** - PCI-7432: 32 DI / 32 DO - PCI-7433: 64 DI - PCI-7434: 64 DO - cPCI-7432/33/34: 3U CompactPCI form factor - cPCI-7432R/33R/34R: 3U CompactPCI with rear I/O - cPCI-7434P/7434RP: Common power configuration - **High Output Drive Capability:** Up to 500 mA sink current per channel (Darlington transistor outputs). - **Wide Input Voltage Range:** 0–24 V DC input range with logic thresholds (H: 5–24 V, L: 0–1.5 V). - **Interrupt Support:** Dual interrupt triggers on digital input channels 0 and 1. - **High Throughput:** 10 kHz (0.1 ms) input/output response rate. - **Standardized Connectivity:** 100‑pin SCSI‑II connector for all models ensures consistent cabling and panel interface. - **Software Integration:** Comprehensive driver and library support for Windows 95/98/NT/2000, LabVIEW®, HP VEE™, DASYLab™, InTouch™, InControl™, ISaGRAF™, and OPC environments. - **Robust Isolation and Protection:** Input overvoltage protection up to 24 V DC; transient suppression jumpers on PCI‑7433. - **Compact Form Factor:** 3U/6U CompactPCI mechanical compatibility with FRP (Front/Rear Panel) mounting.

Manufacturer: Adlink Technology Inc.

Category: DIO Isolated PXI/PXIe/cPCI