- **Redundant Ethernet Ring Technology:** Supports ORing’s proprietary **O‑Ring** redundancy protocol with recovery times of less than 10 ms across up to 250 connected devices. This ensures near‑instantaneous network recovery in the event of a link failure. - **RSTP/STP Support:** Fully compatible with IEEE 802.1w (Rapid Spanning Tree Protocol) and IEEE 802.1D (Spanning Tree Protocol) for network redundancy and loop prevention. - **Power over Ethernet (PoE):** Four 10/100Base‑T(X) ports function as **PSE ports**, supplying up to **25 W per port** in compliance with **IEEE 802.3af**. This allows the switch to power IP cameras, VoIP phones, wireless access points, and other PoE‑enabled devices directly through Ethernet cabling. - **Triple Redundant Power Inputs:** Equipped with **three DC power inputs** (two via terminal block, one via power jack) supporting **12–48 V DC** (terminal block) and **12–45 V DC** (power jack). This triple redundancy ensures continuous operation even if one or two power sources fail. - **Wide Operating Temperature Range:** Designed for extreme environments with an **operating range of –40 °C to +70 °C**, suitable for outdoor and industrial enclosures. - **Rugged Industrial Design:** Constructed with a **metal IP‑30‑rated housing** for protection against dust and mechanical impact. - **Flexible Mounting Options:** Supports **DIN‑rail** and **panel mounting**, facilitating easy integration into control cabinets or industrial racks. - **Comprehensive Event Notification:** Provides multiple alert mechanisms including **Syslog**, **Email**, and **SNMP Trap** notifications for proactive fault management. - **Centralized Management:** Configurable via **Web‑based interface** or **Open‑Vision**, ORing’s Windows‑based network management utility for monitoring and configuration of multiple devices. - **Compact Form Factor:** Small footprint (52 × 106 × 144 mm) allows installation in space‑constrained environments. - **High Reliability:** Mean power consumption of approximately **5 W**, with built‑in surge and ESD protection (Ethernet ports: 4 kV DC ESD; power input: 2 kV DC surge).

Manufacturer: Oring

Category: Box Type

- **EN50155 Compliance:** Certified for railway and rolling stock environments, ensuring vibration, shock, and temperature resilience. - **CompactPCI 3U / 4HP Form Factor:** Hot‑swappable card compatible with PICMG 2.0 CompactPCI backplanes. - **8× Gigabit Ethernet Ports:** Eight 10/100/1000Base‑T(X) ports via CompactPCI socket with auto MDI/MDIX. - **Redundant Network Technologies:** - **O‑Ring** proprietary redundancy with

Manufacturer: Oring

Category: Switch Card

- **High‑Density Gigabit Switching:** 12×10/100/1000Base‑T(X) ports (4×RJ‑45 front, 8×backplane) with auto‑negotiation and auto‑MDI/MDI‑X. - **CompactPCI Integration:** Fully compliant with PICMG 2.0 Rev. 3.0; supports 3U, 8HP form factor with hot‑swap capability. - **Industrial‑Grade Design:** EN50155‑certified for railway and vehicle applications; wide operating temperature range from ‑40 °C to +70 °C. - **Advanced Redundancy:** Supports ORing’s proprietary O‑Ring and O‑Chain technologies (recovery

Manufacturer: Oring

Category: Switch Card

- **CompactPCI 3U 8HP form factor** with hot‑swap capability - **12×10/100/1000Base‑T(X)** ports (4 M12 A‑coded front, 8 CompactPCI backplane) - **EN50155 railway compliance** for vibration, shock, and temperature extremes - **Fast Ethernet redundancy** via ORing’s proprietary **O‑Ring** (

Manufacturer: Oring

Category: Switch Card

- **16-Port Gigabit Managed Switch:** Provides 16 auto-negotiating 10/100/1000Base-T(X) ports—8 M12 connectors on the front and 8 CompactPCI backplane ports (PICMG 2.0 compatible). - **Redundant Ethernet Ring:** Supports fast redundant ring recovery (

Manufacturer: Oring

Category: Switch Card

- **CompactPCI 3U Form Factor:** 16HP width, hot-swappable design compatible with PICMG 2.0 CompactPCI systems. - **High Port Density:** 14 Gigabit Ethernet ports (10/100/1000Base-T(X)) plus 2 two-wire extension ports. - **Redundant Ethernet Ring:** Supports ORing’s proprietary O-Ring and O-Chain redundancy technologies with recovery times under 30 ms across up to 250 units. - **EN50155 Compliance:** Certified for railway and transportation applications, ensuring vibration, shock, and temperature resilience. - **Wide Temperature Range:** Operates reliably from **–40°C to +70°C**, suitable for harsh industrial environments. - **Advanced Network Management:** Web-based GUI, Telnet, CLI (console), and centralized management via ORing’s management software. - **Comprehensive Protocol Support:** STP/RSTP/MSTP, MRP, VLAN, QoS, IGMP Snooping, Modbus TCP, DHCP, SNMPv3, HTTPS, SSH. - **Enhanced Security:** Device Binding, 802.1x authentication, MAC-based port security, RADIUS integration, and DoS/DDoS prevention. - **Energy Efficiency:** IEEE 802.3az Energy-Efficient Ethernet reduces power consumption during low data activity. - **High Switching Performance:** 28.4 Gbps switching bandwidth, 7 µs latency, 8K MAC address table, and 9.6K jumbo frame support. - **CompactPCI Bus Powered:** 5VDC input, typical power consumption 21.5W with overload protection. - **Long-Term Reliability:** 5-year warranty and industrial-grade components for extended service life.

Manufacturer: Oring

Category: Switch Card

- **High Port Density:** 14 × 10/100/1000Base-T(X) ports (8 CompactPCI backplane, 6 M12 front connectors) + 2 × two-wire Ethernet extension ports for long-distance, cost-effective cabling. - **CompactPCI 3U Form Factor:** PICMG 2.0 compatible, 16HP width, hot-swappable design for modular integration. - **Rugged Industrial Design:** Fully compliant with **EN50155** for railway applications, vibration and shock tested per IEC60068 standards, and wide temperature operation from **–40°C to +70°C**. - **Advanced Redundancy:** Supports **O-Ring**, **O-Chain**, **MRP (IEC 62439-2)**, and **MSTP/RSTP/STP** for network fault tolerance with sub-30 ms recovery. - **Comprehensive Management:** Web-based GUI, Telnet, CLI via RS-232 console, and centralized management through ORing’s network management software. - **Enhanced Security:** Includes **Device Binding**, **802.1x authentication**, **MAC-based port security**, **SNMPv3 encryption**, **HTTPS/SSH**, and **DoS/DDoS auto-prevention**. - **Quality of Service (QoS):** Application-based and IP-based QoS for traffic prioritization, ensuring real-time data delivery for critical applications such as IP surveillance and control systems. - **Energy Efficiency:** Supports **IEEE 802.3az Energy-Efficient Ethernet**, reducing power consumption during low data activity periods. - **Modbus TCP Support:** Enables integration with industrial automation systems and SCADA environments. - **High Performance:** 28.4 Gbps switching bandwidth, 7 µs latency, 8K MAC address table, and jumbo frame support up to 9.6 KB.

Manufacturer: Oring

Category: Switch Card

- **EN50155‑compliant** for railway and rolling stock applications. - **3U / 4HP CompactPCI form factor** with **hot‑swap capability**. - **PICMG 2.0 specification compatible** for CompactPCI backplane integration. - **8×10/100Base‑T(X)** Ethernet ports with auto‑negotiation and auto‑MDI/MDI‑X. - **Fast redundant Ethernet ring** (O‑Ring) with recovery time **

Manufacturer: Oring

Category: Switch Card

- **Redundant Ethernet Ring Technology:** Implements ORing’s **O‑Ring** redundancy protocol with recovery time under 10 ms across up to 250 connected devices, ensuring minimal downtime in mission‑critical applications. - **Multiple Redundancy Protocols:** Supports **RSTP/STP (IEEE 802.1w/D)** and **Fast Recovery Mode** for flexible network topologies including Network + Device Redundant, Device Communication Redundant, and standard Ethernet switch configurations. - **Dual Power Inputs:** Operates from both PCI bus power (+5 V DC) and external DC input (9–30 V DC). The external input ensures uninterrupted operation if the host IPC shuts down. - **Relay Output for Fault Notification:** Configurable alarm relay output (1 A @ 24 V DC) for power failure or port link loss events. - **Comprehensive Management:** Web‑based configuration interface and **Open‑Vision** Windows utility for centralized monitoring and management of multiple ORing switches. - **Event Notification:** Supports Syslog, Email (SMTP), and SNMP traps for remote fault and system event reporting. - **SNMP and LLDP Support:** SNMP v1/v2c/v3 for secure network management and **LLDP (IEEE 802.1AB)** for device discovery and topology mapping. - **PCI Bus Compliance:** Fully compliant with **PCI Local Bus Specification Rev 2.2**, 32‑bit Bus Master architecture, and supports **Wake‑on‑LAN (WOL)**. - **Industrial‑Grade Design:** Extended operating temperature range (‑10 °C to 60 °C), ESD protection (EN61000‑4‑2), surge protection (EN61000‑4‑5), and robust mechanical construction for harsh environments. - **Low Power Consumption:** Typical consumption of approximately **3.5 W**, optimized for embedded and IPC applications. - **Warranty:** Backed by a **3‑year manufacturer warranty**.

Manufacturer: Oring

Category: Switch Card

- **Four‑Port Gigabit Switch Architecture:** Provides **3× 10/100/1000Base‑T(X)** RJ‑45 ports and **1× 100/1000Base‑X SFP** port for mixed copper and fiber connectivity. - **PCIe Interface Compatibility:** Supports **PCIe x1** bus interface and is **upward compatible** with **x4, x8, and x16** slots. Fully compliant with **PCIe Revision 1.1**. - **Flexible SFP Configuration:** A **DIP‑switch (S1)** allows selection between **100Base‑FX** and **1000Base‑X** operation for the SFP port (ON = 100Base‑FX, OFF = 1000Base‑X). - **High‑Performance Switching:** - **Store‑and‑forward** switching architecture - **8K MAC address table** - **Auto‑negotiation** and **auto‑MDI/MDI‑X** support - **Flow control** compliant with IEEE 802.3x - **Jumbo Frame Support:** Handles Ethernet frames up to **10,000 bytes**, improving throughput for large data transfers. - **Bus‑Powered Operation:** Draws power directly from the PCIe bus (~4.2 W typical), eliminating the need for external power supplies. - **Industrial‑Grade Design:** Designed for rugged environments with **‑10°C to 60°C** operating temperature, **5–95% non‑condensing humidity**, and compliance with **IEC shock, vibration, and free‑fall** standards. - **Cross‑Platform Driver Support:** Compatible with **Windows, Linux, Unix, Novell, and MacOS** operating systems. - **Long‑Term Reliability:** Backed by a **5‑year warranty** and ORing’s industrial quality assurance.

Manufacturer: Oring

Category: Switch Card

- **Four Gigabit Ethernet Ports:** Equipped with **4×10/100/1000Base-T(X)** RJ45 ports supporting auto MDI/MDI-X and auto-negotiation for flexible network integration. - **PCI Express Interface:** Supports **PCIe x1** bus interface and is fully compatible with **x4, x8, and x16 PCIe slots**, ensuring broad motherboard compatibility. - **High-Speed Data Throughput:** Provides full-duplex 1000 Mbps bandwidth through the PCIe bus architecture, enabling high-performance LAN communication. - **Unmanaged Operation:** Plug-and-play functionality with no configuration required, ideal for systems requiring simple, reliable Ethernet expansion. - **Fast Redundant Ethernet Ring:** Supports redundant Ethernet ring topology with **recovery time

Manufacturer: Oring

Category: Switch Card

- **Integrated PoE P.S.E. Functionality:** Provides three 10/100/1000Base‑T(X) PoE ports compliant with IEEE 802.3at/af standards, delivering up to **30 W per port** and a **total power budget of 65 W**. - **Flexible Fiber Connectivity:** Includes one 100/1000Base‑X SFP port with onboard DIP‑switch for speed selection (ON: 100Base‑FX, OFF: 1000Base‑X). - **PCIe Interface Compatibility:** Supports **PCIe x1** bus interface, compliant with **PCIe Rev. 1.1**, and compatible with **x4, x8, and x16** slots for flexible installation across various IPC motherboards. - **Bus‑Powered Operation:** The switch card itself is powered via the PCIe bus (~4.2 W typical without PoE load), while PoE power is sourced from the **12 VDC ATX line** of the host system. - **High‑Performance Switching:** Supports **store‑and‑forward** switching architecture, **auto‑negotiation**, **auto‑MDI/MDI‑X**, and **10 K jumbo frame** transmission for optimized throughput and reduced latency. - **Robust Industrial Design:** Designed for harsh environments with an **operating temperature range of −10 °C to +60 °C**, **storage temperature −40 °C to +85 °C**, and **humidity tolerance of 5 %–95 % non‑condensing**. - **Comprehensive OS Support:** Compatible with a wide range of operating systems including **Windows (DOS to Win 8)**, **Linux (Kernel 2.4.x–3.x)**, **FreeBSD**, **SCO Unix**, **Novell**, and **Mac OS 10.4–10.7**. - **Industrial‑Grade Reliability:** Certified for **EMI/EMS compliance**, **shock**, **vibration**, and **free‑fall** resistance per IEC and EN standards. - **Long‑Term Support:** Backed by a **5‑year warranty** and ORing’s industrial networking support infrastructure.

Manufacturer: Oring

Category: Switch Card

- **4×10/100/1000Base‑T(X) PoE (P.S.E.) Ports:** Each RJ‑45 port supports Gigabit Ethernet speeds and IEEE 802.3af PoE power delivery up to **15.4 W per port**. - **IEEE Standards Compliance:** - IEEE 802.3 (10Base‑T) - IEEE 802.3u (100Base‑TX) - IEEE 802.3ab (1000Base‑T) - IEEE 802.3x (Flow Control) - IEEE 802.3af (Power over Ethernet) - **PCIe Interface:** Supports **PCIe x1** bus and is compatible with **x4, x8, and x16** slots. Fully compliant with **PCIe Rev. 1.1**. - **PoE Power Source:** Draws PoE power from **12 V DC ATX power input**. - **Auto‑Detection & Classification:** Each LAN port automatically detects PoE or non‑PoE devices and adjusts accordingly. - **Jumbo Frame Support:** Handles Ethernet frames up to **10 KB**, improving throughput for large data transfers. - **Store‑and‑Forward Switching:** Ensures reliable data transmission with error checking. - **Auto‑Negotiation & Auto‑MDI/MDI‑X:** Simplifies network setup by automatically configuring link speed and cable type. - **Overload Current Protection:** Built‑in protection for safe PoE operation. - **Fast Redundant Ethernet Ring:** Recovery time less than **10 ms** across up to **250 units**, ensuring high network availability. - **Alarm Relay Output:** One configurable relay output for system alarms or fault notifications. - **Industrial‑Grade Design:** Extended operating temperature range, ESD and surge protection, and robust mechanical construction.

Manufacturer: Oring

Category: Switch Card

PCI card 4*Ethernet, 4*Intel 82559 10/100Mbps controller, support 32/64bit 33/66MHz PCI bus, Intel 21154 64bit PCI bridge on board, Adlink

Manufacturer: Adlink Technology Inc.

Category: Switch Card

- **Dual 10/100 Mbps Ethernet Ports:** Two independent Fast Ethernet interfaces based on Intel® 82559 controllers, supporting IEEE 802.3 and 802.3u standards for 10Base-T and 100Base-TX operation. - **Bypass Functionality:** Hardware relay-based bypass mechanism automatically connects the two Ethernet ports when system power is off or when the software watchdog timer (WDT) detects a fault. This ensures uninterrupted network traffic flow in fail-safe applications. - **Watchdog Timer (WDT):** Programmable watchdog timer monitors system health. If the system halts or fails to refresh the WDT, the card switches to bypass mode automatically. - **Intel® 21154 PCI-to-PCI Bridge:** Provides 64-bit PCI bus compatibility and efficient data throughput between the host system and Ethernet controllers. - **PXE Remote Boot Support:** Supports Intel® Preboot Execution Environment (PXE) for remote booting over the network, enabling diskless system deployment and remote management. - **Auto-Negotiation and Flow Control:** Complies with IEEE 802.3u auto-negotiation for 10/100 Mbps speed selection and IEEE 802.3x flow control for full-duplex operation. - **LED Indicators:** Each port includes dual LEDs for link/activity and speed indication (10/100 Mbps), providing clear visual status feedback. - **Operating System Support:** Compatible with DOS, Windows® 98 SE/ME/NT/2000, and Linux® operating systems. Drivers are included on the ADLINK support CD. - **Industrial Reliability:** Designed for industrial environments with extended temperature tolerance, robust EMI/EMS compliance, and long-term operational stability.

Manufacturer: Adlink Technology Inc.

Category: Switch Card

- **Industrial-Grade Design:** Built for rugged environments with wide operating temperature range (0°C to 60°C) and high resistance to vibration, shock, and electrical noise. - **Unmanaged Operation:** Plug-and-play functionality with no configuration required, ideal for simple network expansion and reliable data forwarding. - **Port Configuration:** - 4 × 10/100Base-TX RJ45 ports (auto-negotiation, auto MDI/MDI-X) - 1 × 100Base-FX multi-mode fiber port (SC connector standard) - **Fiber Optic Connectivity:** Multi-mode fiber interface supports up to 2 km transmission distance, providing EMI/RFI immunity and enhanced data security. - **Redundant Power Inputs:** Dual 12–48 VDC power inputs ensure uninterrupted operation in case of power source failure. - **Electrical Protection:** - ESD protection: 4 kV DC on Ethernet ports - Surge protection: 2 kV DC on power input - Reverse polarity protection included - **Compact Form Factor:** Space-efficient aluminum enclosure (30 × 68.5 × 105 mm) suitable for DIN-rail or wall mounting. - **High Reliability:** Designed for 24/7 continuous operation in industrial automation networks. - **Compliance:** Meets industrial safety and EMC standards (UL60950, FCC Part 15, CE, EN55022 Class A). - **Maintenance-Free:** No moving parts or fans, ensuring long-term durability and minimal maintenance requirements.

Manufacturer: Sunix

Category: Unmanaged Switches

- **Unmanaged Plug-and-Play Operation:** No configuration required; ideal for simple, reliable network expansion. - **Industrial-Grade Design:** Built to withstand extreme temperatures, vibration, and electrical noise. - **Port Configuration:** - 4 × 10/100Base-TX RJ45 ports (auto-negotiation, auto-MDI/MDIX) - 1 × 100Base-FX multi-mode fiber port (SC connector standard) - **Extended Temperature Range:** -40°C to +85°C for deployment in outdoor or unconditioned environments. - **Redundant Power Input:** Dual 12–48VDC power inputs ensure continuous operation in case of power source failure. - **High Electrical Protection:** - ESD protection: ±4kV DC on Ethernet ports - Surge protection: ±2000V DC on power input - Reverse polarity protection included - **Compact DIN-Rail Mountable Enclosure:** IP30-rated aluminum housing for industrial cabinet installation. - **Low Power Consumption:** 12V/1A (12W typical) for energy-efficient operation. - **Fiber Optic Connectivity:** Multi-mode fiber port extends network reach up to 2 km while providing EMI/RFI immunity. - **Reliability:** Designed for 24/7 continuous operation with high MTBF and robust mechanical construction. - **Compliance:** Meets international industrial safety and EMC standards (UL, CE, FCC, IEC).

Manufacturer: Sunix

Category: Unmanaged Switches

- **Industrial-Grade Design:** Built for rugged environments with wide operating temperature range (0°C to 60°C standard) and high resistance to vibration, shock, and electrical noise. - **Unmanaged Operation:** Plug-and-play functionality with no configuration required, simplifying deployment in industrial networks. - **Port Configuration:** - 4 × 10/100Base-T(X) RJ45 ports (auto-negotiation, auto MDI/MDI-X) - 1 × 100Base-FX single-mode fiber port (SC connector standard) - **Fiber Optic Connectivity:** Single-mode fiber port supports long-distance communication up to 30 km, providing EMI/RFI immunity and enhanced data security. - **Redundant Power Inputs:** Dual 12–48 VDC power inputs ensure continuous operation and prevent downtime in case of power source failure. - **Electrical Protection:** - ESD protection: 4 kV DC on Ethernet ports - Surge protection: 2 kV DC on power input - Reverse polarity protection included - **Compact and Durable Construction:** IP30-rated aluminum enclosure with dimensions of 30 × 68.5 × 105 mm, optimized for DIN-rail or wall mounting. - **Low Power Consumption:** 12 VDC / 1 A (12 W maximum). - **Reliability:** Designed for 24/7 continuous operation in mission-critical industrial networks. - **Compliance:** Meets international safety and EMC standards (UL, CE, FCC, CISPR, IEC). - **Warranty:** 5-year manufacturer warranty.

Manufacturer: Sunix

Category: Unmanaged Switches

- **Unmanaged Industrial Ethernet Switch:** Plug-and-play operation with no configuration required, ideal for simple network expansion in industrial environments. - **Port Configuration:** 4 × 10/100Base-TX (RJ45) ports and 1 × 100Base-FX (SC-type single-mode fiber) port. - **Extended Temperature Range:** Operates reliably from **-40°C to +85°C**, suitable for outdoor or factory-floor installations. - **Rugged Design:** IP30-rated aluminum enclosure provides mechanical durability and electromagnetic shielding. - **DIN-Rail Mounting:** Compact form factor with DIN-rail and wall-mount options for flexible installation in control cabinets. - **Redundant Power Inputs:** Dual 12–48VDC power inputs ensure uninterrupted operation in case of primary power failure. - **High Immunity to Electrical Disturbances:** - **ESD Protection:** 4kV DC on Ethernet ports. - **Surge Protection:** 2000V DC on power input. - **Reverse Polarity Protection:** Prevents damage from incorrect power wiring. - **Fiber Optic Connectivity:** Single-mode fiber port extends communication distance up to 30 km, providing EMI/RFI immunity and enhanced data security. - **Compact Industrial Form Factor:** Dimensions of **30 × 68.5 × 105 mm** allow installation in space-constrained environments. - **Low Power Consumption:** Approximately **12W (1A @ 12VDC)**, ensuring energy-efficient operation. - **High Reliability:** Designed for 24/7 continuous operation in mission-critical industrial networks. - **Compliance with Industrial Standards:** Meets UL, CE, FCC, and IEC environmental and safety standards. - **Maintenance-Free Operation:** No moving parts or fans, reducing maintenance requirements and increasing MTBF.

Manufacturer: Sunix

Category: Unmanaged Switches

- **Unmanaged 5-Port Fast Ethernet Switch:** Provides five 10/100Base-TX auto-negotiating ports supporting full/half duplex operation and auto MDI/MDI-X crossover detection. - **Industrial-Grade Design:** Built for continuous 24/7 operation in environments with vibration, shock, and electrical noise. - **DIN-Rail Mounting:** Compact aluminum IP30 enclosure suitable for DIN-rail or wall mounting in industrial control panels. - **Redundant Dual Power Inputs:** Accepts **12–48VDC** (nominal 24VDC) via removable terminal block and DC jack, ensuring uninterrupted operation in case of power source failure. - **High Electrical Protection:** - **ESD Protection:** 4kV DC on Ethernet ports - **Surge Protection:** 2000V DC on power input - **Reverse Polarity Protection:** Prevents damage from incorrect wiring - **Wide Operating Temperature Range:** Operates reliably from **0°C to 60°C** (standard range), with extended tolerance up to -40°C to 80°C for certain configurations. - **Compact Form Factor:** Dimensions of **30 × 68.5 × 105 mm (W × D × H)** allow installation in space-constrained environments. - **Plug-and-Play Operation:** No configuration required; automatically detects network speed and duplex mode. - **High Reliability:** Designed for deterministic Ethernet performance, ensuring stable data transmission even under adverse conditions. - **Compliance with Industrial Standards:** Meets UL, CE, FCC, and IEC industrial safety and EMC standards.

Manufacturer: Sunix

Category: Unmanaged Switches

- **Unmanaged 5-Port Fast Ethernet Switch:** Provides five 10/100Base-TX RJ45 ports for straightforward plug-and-play Ethernet connectivity without configuration. - **Industrial-Grade Design:** Engineered for continuous 24/7 operation in harsh industrial conditions, including extreme temperatures, vibration, and electrical noise. - **Extended Temperature Range:** Operates reliably from **-40°C to +85°C**, ensuring stable performance in outdoor or unconditioned environments. - **Redundant Dual Power Inputs:** Supports **12–48VDC** dual power sources for uninterrupted operation and enhanced reliability. - **High Electrical Protection:** - **ESD Protection:** 4kV DC on Ethernet ports - **Surge Protection:** 2000V DC on power input - **Reverse Polarity Protection:** Prevents damage from incorrect power wiring. - **Compact DIN-Rail Mountable Form Factor:** Small footprint (30 × 68.5 × 105 mm) for easy integration into control cabinets and industrial panels. - **Rugged IP30 Aluminum Enclosure:** Provides mechanical durability and electromagnetic shielding. - **Low Power Consumption:** Typical consumption of **1A @ 12VDC (12W)**. - **Plug-and-Play Operation:** No software configuration required; automatically negotiates speed and duplex mode. - **High Reliability:** Designed for deterministic Ethernet communication and continuous uptime in automation networks. - **Compliance with Industrial Standards:** Meets UL, CE, FCC, and IEC environmental and safety standards. - **5-Year Warranty:** Long-term reliability backed by SUNIX’s industrial-grade warranty.

Manufacturer: Sunix

Category: Unmanaged Switches

- **Unmanaged Industrial Ethernet Switch:** Plug-and-play operation with no configuration required, ideal for simple network expansion in industrial environments. - **Port Configuration:** 6 × 10/100Base-T(X) RJ45 ports and 2 × 100Base-FX multi-mode fiber ports (SC type standard). - **Multi-Mode Fiber Connectivity:** Supports 50/125 μm fiber with a standard transmission distance of up to 2 km, providing EMI/RFI immunity and extended reach. - **Redundant Dual Power Inputs:** Accepts 12–48 VDC (nominal 24 VDC) for high availability and uninterrupted operation. - **Configurable Alarm Relay Output:** Provides fault indication for power failure or port link-down events, enabling integration with external alarm systems. - **Industrial-Grade Protection:** - ESD protection: 4 kVDC on Ethernet ports. - Surge protection: 2 kVDC on power input. - Reverse polarity protection included. - **Compact and Rugged Design:** IP30-rated aluminum enclosure with DIN-rail mounting for easy installation in control cabinets. - **Wide Operating Temperature Range:** 0°C to 60°C standard operation, suitable for most industrial environments. - **High Reliability:** Designed for 24/7 continuous operation with minimal maintenance. - **Compliance with Industrial Standards:** Meets UL, CE, FCC, and IEC industrial safety and EMC standards.

Manufacturer: Sunix

Category: Unmanaged Switches

- **8-Port Configuration:** Six 10/100Base-T(X) RJ45 ports and two 100Base-FX multi-mode fiber ports for flexible network topology and long-distance connectivity. - **Industrial-Grade Design:** Engineered for harsh environments with extended temperature range (-40°C to +85°C), high vibration resistance, and robust IP30 aluminum enclosure. - **Unmanaged Operation:** Plug-and-play functionality with no configuration required, ensuring quick deployment and minimal maintenance. - **Fiber Optic Connectivity:** Two 100Base-FX multi-mode ports (50/125 μm fiber, up to 2 km transmission distance) provide EMI/RFI immunity and secure, interference-free data transmission. - **Redundant Power Inputs:** Dual 12–48VDC power inputs ensure uninterrupted operation in case of primary power failure. - **Alarm Relay Output:** One configurable relay output for system fault indication (e.g., power failure or port link down), enabling integration with external alarm systems. - **High Electrical Protection:** - ESD protection: ±4kV DC on Ethernet ports - Surge protection: ±2000V DC on power input - Reverse polarity protection included - **Compact DIN-Rail Mountable Form Factor:** Designed for easy installation in control cabinets or industrial panels. - **Low Power Consumption:** Typical consumption of 12W (1A @ 12VDC), ensuring energy efficiency and reduced heat generation. - **Reliability and Longevity:** Designed for 24/7 continuous operation with a 5-year manufacturer warranty.

Manufacturer: Sunix

Category: Unmanaged Switches

- **Industrial‑Grade Design:** Built for continuous 24/7 operation in demanding environments with high vibration, electrical noise, and temperature variations. - **8-Port Configuration:** Six 10/100Base‑TX RJ45 ports and two 100Base‑FX single‑mode fiber ports for flexible network topology. - **Single‑Mode Fiber Connectivity:** Supports 9/125 µm fiber with standard transmission distance up to 30 km, ideal for long‑haul industrial communication. - **Unmanaged Operation:** Plug‑and‑play functionality with no configuration required, simplifying deployment in fixed industrial networks. - **Redundant Dual Power Inputs:** Accepts 12–48 V DC (nominal 24 V DC) for power redundancy and increased reliability. - **Configurable Alarm Relay Output:** Provides one relay output for system alarms such as power failure or port link loss, enabling integration with external alarm systems. - **High Electrical Protection:** - ESD protection: 4 kV DC on Ethernet ports - Surge protection: 2 kV DC on power input - Reverse polarity protection included - **Compact DIN‑Rail Mountable Enclosure:** IP30 aluminum housing with dimensions 30 × 68.5 × 105 mm (W × D × H). - **Wide Operating Temperature Range:** 0 °C to 60 °C (standard), suitable for most industrial control cabinets. - **High Reliability:** Designed for deterministic Ethernet communication and continuous uptime in mission‑critical applications. - **Maintenance‑Free Operation:** No moving parts, fanless design, and passive cooling ensure long service life.

Manufacturer: Sunix

Category: Unmanaged Switches

- **Unmanaged Industrial Ethernet Switch:** Plug‑and‑play operation with no configuration required, ideal for simple, robust network expansion. - **Port Configuration:** 6 × 10/100Base‑TX (RJ‑45) auto‑negotiating ports and 2 × 100Base‑FX single‑mode fiber ports (SC connector standard). - **Extended Temperature Range:** Operates reliably from ‑40°C to +85°C, suitable for outdoor and factory‑floor environments. - **Rugged Industrial Design:** IP30 aluminum enclosure with high mechanical strength, vibration resistance, and electromagnetic immunity. - **Redundant Power Inputs:** Dual 12–48 V DC inputs ensure uninterrupted operation in case of power source failure. - **Alarm Relay Output:** One configurable relay output for system fault or power failure notification, enabling integration with external alarm systems. - **High Electrical Protection:** - ESD protection: ±4 kV DC on Ethernet ports - Surge protection: ±2 kV DC on power input - Reverse polarity protection included - **Compact DIN‑Rail Mounting:** Space‑efficient design (30 × 68.5 × 105 mm) for easy installation in control cabinets. - **Fiber Optic Connectivity:** Two single‑mode fiber ports extend network reach up to 30 km, providing EMI/RFI immunity and secure data transmission. - **Low Power Consumption:** Typical 12 W at 12 V DC (1 A). - **High Reliability:** Designed for 24/7 continuous operation in harsh industrial environments. - **Compliance with Industrial Standards:** Meets UL, CE, FCC, and IEC environmental and safety standards.

Manufacturer: Sunix

Category: Unmanaged Switches