LOOKING FOR THE RIGHT

INDUSTRIAL SOLUTION?

Discover embedded, communication and automation solutions tailored to your application.

Home / Products / PC Add-On Cards

PC Add-On Cards

PC add-on cards expand industrial systems with additional interfaces, measurement functions, or communication protocols. This allows machines, test systems, and automation solutions to be adapted flexibly to specific requirements.

Subcategories

3.1 - (A/D Cards) Data acquisition cards for digitising analogue signals in industrial test and automation systems.
3.1.1 - (A/D Cards General Purpose) A/D cards for general measurement tasks in test benches, laboratories and automation applications.
3.1.1.1 - (A/D General Purpose PCIe) PCI Express A/D cards for general acquisition and digitisation of analogue measurement signals.
3.1.1.2 - (A/D General Purpose PCI) PCI A/D cards for general acquisition and digitisation of analogue measurement signals.
3.1.1.3 - (A/D General Purpose ISA) ISA A/D cards for general acquisition and digitisation of analogue measurement signals.
3.1.2 - (A/D Cards Intelligent) Intelligent A/D cards for demanding measurement, monitoring and control applications.
3.1.2.1 - (A/D Intelligent PCIe) Intelligent PCI Express A/D cards for demanding measurement and control applications.
3.1.2.2 - (A/D Intelligent PCI) Intelligent PCI A/D cards for demanding measurement and control applications.
3.1.2.3 - (A/D Intelligent PXI/PXIe/cPCI) Intelligent PXI, PXI Express and CompactPCI A/D cards for demanding measurement and control applications.
3.1.3 - (A/D Cards High Resolution) High-resolution A/D cards for precise measurements requiring high accuracy and dynamic range.
3.1.3.1 - (A/D High Resolution PCIe) High-resolution PCI Express A/D cards for precise measurements with high accuracy and dynamic range.
3.1.3.2 - (A/D High Resolution PCI) High-resolution PCI A/D cards for precise measurements with high accuracy and dynamic range.
3.1.3.3 - (A/D High Resolution PXI) High-resolution PXI A/D cards for precise measurements with high accuracy and dynamic range.
3.1.3.4 - (A/D High Resolution ISA) High-resolution ISA A/D cards for precise measurements with high accuracy and dynamic range.
3.1.4 - (A/D Cards High Speed) High-speed A/D cards and digitisers for acquiring dynamic and transient signals.
3.1.4.1 - (A/D High Speed PCIe) High-speed PCI Express A/D cards and digitisers for acquiring dynamic and transient signals.
3.1.4.2 - (A/D High Speed PCI) High-speed PCI A/D cards and digitisers for acquiring dynamic and transient signals.
3.1.4.3 - (A/D High Speed PXI/PXIe) High-speed PXI and PXI Express A/D cards and digitisers for acquiring dynamic and transient signals.
3.1.4.4 - (A/D High Speed ISA) High-speed ISA A/D cards and digitisers for acquiring dynamic and transient signals.
3.1.5 - (A/D Cards Isolated) Isolated A/D cards for interference-resistant measurements in industrial environments.
3.1.5.1 - (A/D Isolated PCIe) Isolated PCI Express A/D cards for interference-resistant measurements in industrial environments.
3.1.5.2 - (A/D Isolated PCI) Isolated PCI A/D cards for interference-resistant measurements in industrial environments.
3.1.5.3 - (A/D Isolated ISA) Isolated ISA A/D cards for interference-resistant measurements in industrial environments.
3.2 - (D/A Cards) Output cards for generating analogue voltage and current signals in industrial control and test systems.
3.2.1 - (D/A Cards General Purpose) D/A cards for general analogue output, control and simulation applications.
3.2.1.1 - (D/A General Purpose PCIe) PCI Express D/A cards for precise output of analogue voltage and current signals.
3.2.1.2 - (D/A General Purpose PCI) PCI D/A cards for precise output of analogue voltage and current signals.
3.2.1.3 - (D/A General Purpose ISA) ISA D/A cards for precise output of analogue voltage and current signals.
3.2.2 - (D/A Cards Intelligent) Intelligent D/A cards for demanding analogue output and control applications.
3.2.2.1 - (D/A Intelligent PCIe) Intelligent PCI Express D/A cards for demanding analogue output and control applications.
3.2.2.2 - (D/A Intelligent PCI) Intelligent PCI D/A cards for demanding analogue output and control applications.
3.2.2.3 - (D/A Intelligent PXI/cPCI) Intelligent PXI and CompactPCI D/A cards for demanding analogue output and control applications.
3.2.3 - (D/A Cards Isolated) Isolated D/A cards for reliable analogue signal output in industrial installations.
3.2.3.1 - (D/A Isolated PCIe) Isolated PCI Express D/A cards for reliable analogue signal output in industrial installations.
3.2.3.2 - (D/A Isolated PCI) Isolated PCI D/A cards for reliable analogue signal output in industrial installations.
3.2.3.3 - (D/A Isolated ISA) Isolated ISA D/A cards for reliable analogue signal output in industrial installations.
3.3 - (DIO Cards) Cards for digital inputs and outputs, relays, counter functions and industrial motion control.
3.3.1 - (DIO Non-Isolated) Non-isolated digital I/O cards for fast TTL and logic signals in controlled system environments.
3.3.1.1 - (DIO Non-Isolated PCIe) Non-isolated PCI Express digital I/O cards for fast TTL and logic signals.
3.3.1.2 - (DIO Non-Isolated PCI) Non-isolated PCI digital I/O cards for fast TTL and logic signals.
3.3.1.3 - (DIO Non-Isolated PXI/PXIe/cPCI) Non-isolated PXI, PXI Express and CompactPCI digital I/O cards for fast TTL and logic signals.
3.3.1.4 - (DIO Non-Isolated ISA) Non-isolated ISA digital I/O cards for fast TTL and logic signals.
3.3.2 - (DIO Isolated) Isolated digital I/O cards for reliable connection of industrial sensors and actuators.
3.3.2.1 - (DIO Isolated PCIe) Isolated PCI Express digital I/O cards for reliable connection of sensors and actuators.
3.3.2.2 - (DIO Isolated PCI) Isolated PCI digital I/O cards for reliable connection of sensors and actuators.
3.3.2.3 - (DIO Isolated PXI/PXIe/cPCI) Isolated PXI, PXI Express and CompactPCI digital I/O cards for reliable connection of sensors and actuators.
3.3.2.4 - (DIO Isolated ISA) Isolated ISA digital I/O cards for reliable connection of sensors and actuators.
3.3.3 - (Counter/Timer) Counter and timer cards for precise acquisition, output and processing of time-critical pulse signals.
3.3.3.1 - (Counter/Timer PCIe) PCI Express counter and timer cards for precise processing of time-critical pulse signals.
3.3.3.2 - (Counter/Timer PCI) PCI counter and timer cards for precise processing of time-critical pulse signals.
3.3.3.3 - (Counter/Timer PXI/PXIe/cPCI) PXI, PXI Express and CompactPCI counter and timer cards for precise processing of time-critical pulse signals.
3.3.3.4 - (Counter/Timer ISA) ISA counter and timer cards for precise processing of time-critical pulse signals.
3.3.4 - (Motion Control Plug-In Cards) Plug-in cards for multi-axis servo, stepper and EtherCAT-based motion control.
3.3.4.1 - (Motion Control / EtherCAT PCIe) PCI Express cards for multi-axis servo, stepper and EtherCAT-based motion control.
3.3.4.2 - (Motion Control / EtherCAT PCI) PCI cards for multi-axis servo, stepper and EtherCAT-based motion control.
3.3.4.3 - (Motion Control / EtherCAT PXI/PXIe/cPCI) PXI, PXI Express and CompactPCI cards for multi-axis servo, stepper and EtherCAT-based motion control.
3.3.4.4 - (Motion Control / EtherCAT ISA) ISA cards for multi-axis servo, stepper and EtherCAT-based motion control.
3.3.4.5 - (Motion Control / EtherCAT Additional Modules) Additional modules for motion control and EtherCAT systems, expanding axis and I/O functions.
3.4 - (Panels, Driver, Accessories) Terminal modules, cables, drivers and accessories for professional integration of industrial I/O cards.
3.4.1 - (DIN Rail Panels) DIN-rail terminal modules for structured, service-friendly field wiring.
3.4.2 - (General Purpose Panels) General-purpose terminal modules for clearly arranged connection of measurement and I/O signals.
3.4.3 - (High Density Panels) Terminal modules for high-density I/O cards and compact field wiring.
3.4.4 - (Analog Panels) Terminal modules for analogue measurement and output signals in test and automation systems.
3.4.5 - (Digital Panels) Terminal modules for digital inputs, outputs, relays and industrial control signals.
3.4.6 - (Cables and Accessories) Cables, connectors and system accessories for reliable connection of I/O cards and terminal modules.
3.4.7 - (Driver, Software) Drivers and software packages for configuring, programming and operating industrial expansion cards.
3.4.7.1 - (ADLink Driver, Software) Drivers and software tools for ADLINK measurement, control and communication hardware.
3.4.7.2 - (Rayon Driver, Software) Drivers and software tools for Rayon industrial expansion cards.
3.4.7.3 - (Contec Driver, Software) Drivers and software tools for Contec measurement and I/O hardware.
3.4.7.4 - (Axiom Driver, Software) Drivers and software tools for Axiom industrial expansion cards.
3.5 - (Communication Cards: RS232, RS485, IEEE) Interface cards for industrial communication via RS-232, RS-422, RS-485 and IEEE-488/GPIB.
3.5.1 - (Professional Serial) Professional serial interface cards for reliable multi-port communication in industrial applications.
3.5.2 - (PCI Serial 1..2-Ports) Serial PCI cards with one or two ports for compact RS-232, RS-422 and RS-485 connectivity.
3.5.2.1 - (RS232 2-Ports PCI) PCI interface cards with two RS-232 ports for industrial peripherals and control devices.
3.5.2.2 - (RS485 / RS422 2-Ports) Dual-port interface cards for robust RS-422 and RS-485 communication.
3.5.2.3 - (RS485 / RS422 1-2-Port) Serial interface cards with one or two RS-422/RS-485 ports for field devices and bus systems.
3.5.2.4 - (Sharer/Converter 1-2 Ports) Port sharers and interface converters for serial connections with one or two ports.
3.5.3 - (PCI Serial 4-Port) Four-port serial PCI cards for connecting multiple industrial devices in parallel.
3.5.3.1 - (RS232 4-Ports) Interface cards with four RS-232 ports for industrial devices and peripheral systems.
3.5.3.2 - (RS485 / RS422 4-Po) Interface cards with four RS-422/RS-485 ports for interference-resistant serial communication.
3.5.3.3 - (RS232 Mixed RS485 / RS422 4-Ports PCI) Four-port PCI cards with configurable RS-232, RS-422 and RS-485 interfaces.
3.5.4 - (Serial 8-Port) Eight-port serial cards for systems requiring a high number of industrial communication interfaces.
3.5.4.1 - (RS232 8-Port) Interface cards with eight RS-232 ports for extensive serial device connectivity.
3.5.4.2 - (8-Port 5V Single Mixed) Eight-port cards for mixed 5 V serial interfaces and flexible device connectivity.
3.5.4.3 - (RS485 / RS422 8-ports) Interface cards with eight RS-422/RS-485 ports for industrial multi-drop connections.
3.5.4.4 - (RS232 Mixed RS485 / RS422 8-Port) Eight-port cards with configurable RS-232, RS-422 and RS-485 interfaces.
3.5.5 - (Converter USB, RS232, RS485, RS422, TTY20mA) Interface converters for USB, RS-232, RS-422, RS-485 and TTY 20 mA communication.
3.5.5.1 - (USB RS232 Converter) USB-to-RS-232 converters for adding serial interfaces to industrial systems.
3.5.5.2 - (RS232 RS485 Converter) Converters for reliable conversion between RS-232 and RS-485.
3.5.5.3 - (RS232 Port Sharer) RS-232 port sharers for controlled sharing of serial device connections.
3.5.5.4 - (Serial Data Logger) Serial data loggers for continuous acquisition and recording of communication data.
3.5.6 - (PCIe / PCI max 128 Serial) PCIe and PCI cards for scalable serial systems with up to 128 interfaces.
3.5.6.1 - (PCIe max 128 Serial) PCI Express solutions for scalable serial communication with up to 128 ports.
3.5.6.2 - (PCI max 128 Serial) PCI solutions for scalable serial communication with up to 128 ports.
3.5.7 - (cPCI Serial 4/8-Port) CompactPCI cards with four or eight serial ports for modular industrial systems.
3.5.8 - (General Purpose Cards) General-purpose communication cards for additional serial interfaces and industrial device connectivity.
3.6 - (Special Cards) Special-purpose cards and interface modules for specific industrial measurement, monitoring and communication tasks.
3.6.1 - (IEEE (GPIB) Cards) IEEE-488/GPIB interface cards for controlling and integrating test and laboratory equipment.
3.6.2 - (CardBus) CardBus expansion cards providing additional measurement and communication interfaces for compatible systems.
3.6.3 - (External AD Converter) External A/D converters for digitising analogue measurement signals outside the computer system.
3.6.4 - (Watch Dog Cards) Watchdog cards for monitoring industrial computer systems and initiating defined safety responses.
3.6.5 - (mini-PCIe) Mini PCIe modules for compact expansion of industrial embedded and computer systems.

Products

1321 products

No. Code Product Price Quantity
3.4.6
CableDB37-2MF - DB37 round cable 2m male/female
DB37 round cable 2m male/female CableDB37-2MF
DB37 round cable 2m male/female

- **Connector Type:** DB37 (37-pin D-sub) male to DB37 female - **Cable Length:** 2 meters (approx. 6.56 feet) - **Cable Type:** Round, shielded multi-conductor cable for signal integrity and EMI protection - **Construction:** Durable molded connectors with strain relief for mechanical stability - **Compatibility:** Fully compatible with standard DB37 interface ports and extension applications - **Signal Support:** Suitable for analog, digital, and serial communication signals - **Versatility:** Ideal for extending or connecting DB37-equipped devices such as controllers, I/O modules, and communication interfaces - **Ease of Use:** Plug-and-play design with secure screw-lock connectors for stable connections - **Durability:** Designed for repeated connection cycles and long-term use in demanding environments - **Applications:** Industrial automation, instrumentation, CNC machinery, laboratory equipment, and legacy computer systems

Manufacturer: No category

Category: Cables and Accessories

20,00 EUR (w/o VAT)
3.4.6
CableDB37-2MM - DB37 round cable 2m male/male
DB37 round cable 2m male/male CableDB37-2MM
DB37 round cable 2m male/male

- **Connector Type:** DB37 male to DB37 male (37-pin D-sub connectors on both ends) - **Cable Length:** 2 meters (approx. 6.56 feet) - **Cable Type:** Round, shielded multi-conductor cable for enhanced EMI/RFI protection - **Signal Integrity:** Designed for low signal loss and minimal crosstalk across all 37 conductors - **Durability:** Molded strain relief at each connector end to prevent cable fatigue and ensure long-term reliability - **Compatibility:** Suitable for devices, controllers, and interfaces using DB37 connectors, including industrial automation systems, CNC machines, test equipment, and legacy computer hardware - **Construction:** High-quality copper conductors with PVC or similar insulation for flexibility and mechanical protection - **Plug-and-Play Design:** No additional configuration required; supports direct connection between compatible DB37 ports - **Versatility:** Can be used for both analog and digital signal transmission, depending on system requirements - **Universal Application:** Commonly used in RS-449, IEEE-488, and custom parallel or serial communication setups

Manufacturer: No category

Category: Cables and Accessories

20,00 EUR (w/o VAT)
3.4.6
CableDB37-3MF - DB37 cable 3m male/female
DB37 cable 3m male/female CableDB37-3MF
DB37 cable 3m male/female

- **Connector Type:** DB37 (D-subminiature 37-pin) male to DB37 female - **Cable Length:** 3 meters (approx. 9.84 feet) - **Cable Type:** Round, shielded multi-conductor cable - **Signal Compatibility:** Suitable for analog, digital, and serial data transmission - **Construction:** Molded connectors with strain relief for mechanical robustness - **Pin Configuration:** Fully populated 37-pin configuration for complete signal pass-through - **Compatibility:** Standard DB37 interface compliant with RS-449, RS-422, and general-purpose I/O systems - **Durability:** Designed for industrial, laboratory, and instrumentation environments - **Ease of Use:** Plug-and-play connectivity between DB37-compatible devices - **Versatility:** Can be used as an extension cable, interface cable, or control signal link Unique selling points include its **full pin-to-pin continuity**, **shielded round cable design** for noise reduction, and **rugged molded connectors** that ensure long-term reliability in demanding applications.

Manufacturer: No category

Category: Cables and Accessories

22,00 EUR (w/o VAT)
3.4.6
CableDB37-5MF - DB37 cable 5m male/female
DB37 cable 5m male/female CableDB37-5MF
DB37 cable 5m male/female

- **Connector Type:** DB37 (D-subminiature 37-pin) male to DB37 female. - **Cable Length:** 5 meters (16.4 feet). - **Cable Type:** Round, shielded multi-conductor cable for signal integrity and noise reduction. - **Gender Configuration:** Male connector on one end, female connector on the other, enabling direct extension of DB37 connections. - **High-Density Pin Configuration:** 37-pin arrangement supports multiple signal lines for parallel data or control signals. - **Durable Construction:** Molded connectors with strain relief to prevent cable damage and ensure long-term reliability. - **Versatile Application:** Suitable for data acquisition systems, industrial automation, CNC machinery, test equipment, and legacy computer interfaces. - **Plug-and-Play Compatibility:** Fully compatible with standard DB37 ports and devices. - **Secure Connection:** Screw-lock fasteners on both connectors ensure stable mechanical and electrical contact. - **RoHS Compliant Materials:** Environmentally safe construction meeting modern compliance standards.

Manufacturer: No category

Category: Cables and Accessories

28,00 EUR (w/o VAT)
3.4.6
DIO-68M/96F - Cable connecting PIO-48D(CB)H to EPD-96
Cable connecting PIO-48D(CB)H to EPD-96 DIO-68M/96F
Cable connecting PIO-48D(CB)H to EPD-96

- **Purpose‑built connectivity:** Designed exclusively for linking the PIO‑48D(CB)H digital I/O PC card to the EPD‑96 terminal block, ensuring pin‑to‑pin compatibility and correct signal mapping. - **High‑density connectors:** Utilizes a **68‑pin 0.8 mm pitch mini‑ribbon connector** on the board side and a **96‑pin half‑pitch connector** on the terminal block side, matching CONTEC’s standardized interface scheme. - **Shielded construction:** Employs a fully shielded cable assembly to minimize electromagnetic interference (EMI) and maintain signal integrity in industrial environments. - **Industrial‑grade reliability:** Built to withstand mechanical stress, vibration, and electrical noise typical of factory automation and measurement systems. - **Plug‑and‑play compatibility:** No special configuration required; the cable directly mates with CONTEC’s standard connectors used on the F‑series and L‑series analog/digital I/O boards and terminal units. - **Optimized for high‑speed digital I/O:** Supports the full bandwidth and timing characteristics of the PIO‑48D(CB)H, ensuring accurate signal transmission for high‑speed digital control and monitoring. - **Part of a modular system:** Integrates seamlessly with CONTEC’s ecosystem of boards, cables, and terminal blocks, allowing flexible system configuration and easy maintenance. - **RoHS‑compliant materials:** Constructed using environmentally safe materials in accordance with international directives.

Manufacturer: Contec

Category: Cables and Accessories

200,00 EUR (w/o VAT)
3.4.6
PCA68PS-0.5P - Cable 0,5m shielded with 68pin HD connector
Cable 0,5m shielded with 68pin HD connector PCA68PS-0.5P
Cable 0,5m shielded with 68pin HD connector

- **High-Density 68-Pin HD Connector:** Utilizes a 0.8 mm pitch connector for compact, high-channel-count signal interfacing. - **Shielded Construction:** The cable is fully shielded to minimize electromagnetic interference (EMI) and crosstalk, ensuring signal integrity in electrically noisy industrial environments. - **Optimized for Analog and Digital I/O Boards:** Designed for use with CONTEC’s **ADA16-32/2(PCI)F**, **ADA16-32/2(CB)F**, and other 68-pin interface boards. - **Industrial-Grade Durability:** Built with robust materials suitable for continuous operation in automation, measurement, and control systems. - **Short-Length Configuration (0.5 m):** Ideal for compact installations where minimal signal delay and reduced cable clutter are required. - **Molded Connector Ends:** Provides mechanical stability and strain relief, preventing connector damage during repeated use. - **Compatibility with Multiple Interface Standards:** Supports analog, digital, and mixed-signal transmission for PCI, PC Card, and CompactPCI systems. - **Plug-and-Play Integration:** Designed for direct connection between CONTEC boards and terminal units without additional adapters.

Manufacturer: Contec

Category: Cables and Accessories

55,00 EUR (w/o VAT)
3.4.6
PCA68PS-1.5P - Cable 1,5m shielded with 68pin HD connector
Cable 1,5m shielded with 68pin HD connector PCA68PS-1.5P
Cable 1,5m shielded with 68pin HD connector

- **High‑Density 68‑Pin Interface:** Equipped with a 68‑pin half‑pitch (0.8 mm) high‑density connector, ensuring compact yet high‑capacity signal routing suitable for multi‑channel analog or digital I/O systems. - **Shielded Construction:** Full‑coverage shielding minimizes electromagnetic interference (EMI) and crosstalk, maintaining signal integrity in electrically noisy industrial environments. - **Optimized Length (1.5 m):** Provides an ideal balance between flexibility and signal quality for rack‑mounted or panel‑mounted systems. - **Industrial‑Grade Durability:** Designed for continuous operation in automation, measurement, and control systems. The cable jacket and internal conductors are rated for mechanical resilience and electrical stability. - **Compatibility with CONTEC Boards:** Specifically designed for use with CONTEC analog and digital I/O boards, including models such as ADA16‑32/2(PCI)F, ADA16‑32/2(CB)F, and other 68‑pin interface products. - **Plug‑and‑Play Integration:** Factory‑terminated connectors ensure reliable mating with CONTEC boards and terminal units without additional assembly. - **Noise‑Resistant Signal Transmission:** Shielded twisted‑pair wiring and precision impedance control reduce signal degradation over the 1.5 m length. - **Compliance with PCI Bus Accessory Standards:** Fully compatible with CONTEC’s PCI Bus Series accessories, ensuring seamless integration with analog, digital, and communication modules.

Manufacturer: Contec

Category: Cables and Accessories

60,00 EUR (w/o VAT)
3.4.6
PCA96PS-1.5 - Cable 1,5m with 96pin to open end
Cable 1,5m with 96pin to open end PCA96PS-1.5
Cable 1,5m with 96pin to open end

- **High‑Density 96‑Pin Half‑Pitch Connector:** Equipped with a precision 96‑pin half‑pitch (Honda Tsushin Kogyo or equivalent) connector on one end, ensuring compatibility with CONTEC PCI and CompactPCI I/O boards. - **Open‑End Termination:** The opposite end is open, allowing direct wiring to custom terminal blocks, control panels, or external devices. - **Shielded Construction:** The cable features full shielding to minimize electromagnetic interference (EMI) and crosstalk, ensuring signal integrity in electrically noisy industrial environments. - **Optimized Length:** 1.5 m total length provides flexibility for rack or panel installations while maintaining signal quality. - **Industrial Durability:** Designed for continuous operation in factory automation, process control, and test systems. The cable jacket and conductors are rated for industrial temperature and mechanical stress. - **High Compatibility:** Fully compatible with CONTEC’s 96‑pin half‑pitch interface boards such as: - PI‑64L(PCI), PO‑64L(PCI), PIO‑32/32L(PCI), PIO‑64/64L(PCI) - PIO‑32/32F(PCI), PIO‑32/32B(PCI)H, PIO‑48D(PCI) - CNT24‑4D(PCI), CNT32‑8M(PCI) - SMC‑2P(PCI), SMC‑4P(PCI) - AD12‑64(PCI), AD12‑16(PCI)E, and other analog/digital boards using 96‑pin connectors. - **Noise‑Resistant Signal Transmission:** Shielded twisted‑pair internal wiring reduces susceptibility to external noise and ensures stable digital or analog signal transfer. - **Flexible Integration:** Can be used with optional terminal units such as EPD‑96, DTP‑64(PC), or connector converters like CCB‑96 for 37‑pin D‑type breakout.

Manufacturer: Contec

Category: Cables and Accessories

Request a quote
3.4.6
PCA96PS-3 - Cable 3m with 96pin to open end
Cable 3m with 96pin to open end PCA96PS-3
Cable 3m with 96pin to open end

- **High‑Density 96‑Pin Half‑Pitch Connector:** Equipped with a precision 96‑pin half‑pitch (Honda Tsushin Kogyo or equivalent) male connector on one end, compatible with CONTEC’s PCI and CompactPCI I/O boards. - **Open‑End Configuration:** The opposite end of the cable is open, allowing direct wiring to custom terminal blocks, sensors, actuators, or other external devices. - **Shielded Construction:** Full‑length shielding minimizes electromagnetic interference (EMI) and crosstalk, ensuring stable signal transmission in electrically noisy industrial environments. - **Optimized for CONTEC PCI Bus Boards:** Designed for use with digital I/O, analog I/O, counter, and motor control boards such as PIO‑32/32L(PCI), PI‑64L(PCI), PO‑64L(PCI), CNT24‑4D(PCI), and SMC‑2P(PCI). - **Industrial‑Grade Durability:** Built with robust insulation and conductor materials suitable for continuous operation in factory automation, process control, and test systems. - **Flexible 3 m Length:** Provides sufficient reach for rack‑mounted or panel‑mounted installations while maintaining signal integrity. - **High Compatibility:** Interfaces seamlessly with CONTEC terminal units (EPD‑96, DTP‑64(PC)), connector converters (CCB‑96), and monitoring tools (CM‑64(PC)E).

Manufacturer: Contec

Category: Cables and Accessories

Request a quote
3.4.6
PCA96PS-5 - Cable 5m with 96pin to open end
Cable 5m with 96pin to open end PCA96PS-5
Cable 5m with 96pin to open end

- **High-Density 96-Pin Half-Pitch Connector:** Equipped with a precision-engineered 96-pin half-pitch (Honda Tsushin Kogyo compatible) male connector for direct interface with CONTEC PCI I/O boards. - **Open-End Termination:** The opposite end of the cable is open, allowing users to connect individual wires to custom terminal blocks, sensors, actuators, or other external devices. - **Shielded Construction:** The cable is fully shielded to minimize electromagnetic interference (EMI) and ensure signal integrity in industrial environments. - **Industrial-Grade Durability:** Designed for continuous operation in factory automation, process control, and data acquisition systems. - **Compatibility:** Fully compatible with CONTEC’s 96-pin half-pitch interface boards, including digital I/O, analog I/O, counter, and motor control boards. - **Flexible Integration:** Supports connection to terminal units such as EPD-96, DTP-64(PC), and converter boards like CCB-96. - **Standardized Accessory:** Part of CONTEC’s standardized cable lineup for PCI Bus Series boards, ensuring consistent pin mapping and reliable connectivity.

Manufacturer: Contec

Category: Cables and Accessories

Request a quote
3.4.6
PCB100PS-1.5 - Cable 1.5m shielded with 100pin male-male connector
Cable 1.5m shielded with 100pin male-male connector PCB100PS-1.5
Cable 1.5m shielded with 100pin male-male connector

- **High-Density 100-Pin Connectivity:** Equipped with two 100-pin, 0.8mm-pitch male connectors, the cable supports high signal density for complex data and control interfaces. - **Shielded Construction:** The cable incorporates a full shielding layer to minimize electromagnetic interference (EMI) and crosstalk, ensuring stable signal transmission even in electrically noisy environments. - **Precision Connectors:** Uses HDRA-E100MA1 connectors (manufactured by HONDA or equivalent), known for their mechanical robustness and reliable contact performance. - **Multiple Length Options:** Available in four standard lengths—0.5m, 1.5m, 3m, and 5m—to accommodate various installation requirements. - **Durable Build:** Constructed with high-quality materials, including UL20276-rated conductors, ensuring long-term durability and compliance with safety standards. - **Compact Form Factor:** The 0.8mm pitch and 100-pin configuration allow for compact, space-efficient wiring in dense electronic assemblies. - **Secure Connection:** Each connector is equipped with M2 thumb screws for mechanical fastening, preventing accidental disconnection due to vibration or movement. - **Compatibility:** Designed specifically for CONTEC boards featuring 100-pin 0.8mm-pitch connectors, but also compatible with other devices using the same connector standard. - **Flexible Application:** Suitable for signal, control, and data transmission in industrial automation, measurement systems, and embedded control environments.

Manufacturer: Contec

Category: Cables and Accessories

Request a quote
3.4.6
PCB37PS-0.5P - Cable 0,5m shielded with 37pin D-type male at each end
Cable 0,5m shielded with 37pin D-type male at each end PCB37PS-0.5P
Cable 0,5m shielded with 37pin D-type male at each end

- **Shielded Construction:** The cable is fully shielded to minimize electromagnetic interference (EMI) and crosstalk, ensuring stable signal integrity in electrically noisy environments. - **Dual 37-pin D-type Male Connectors:** Equipped with precision-molded 37-pin D-sub male connectors on both ends, compatible with CONTEC’s D-type interface boards and terminal units. - **High Signal Integrity:** Designed for accurate digital and analog signal transmission between PCI boards and external devices or terminal panels. - **Industrial-Grade Durability:** Built for continuous operation in industrial automation systems, test benches, and control panels. - **Short-Length Option (0.5m):** Ideal for compact installations where minimal cable length reduces signal delay and clutter. - **Compatibility:** Fully compatible with CONTEC’s 37-pin D-type interface boards, including digital I/O, analog I/O, counter, and communication boards. - **Plug-and-Play Integration:** Designed for direct connection between CONTEC boards and terminal units such as EPD-37, DTP-3(PC), and DTP-4(PC). - **Standardized Pin Configuration:** Maintains consistent pin mapping across CONTEC’s accessory ecosystem for simplified wiring and maintenance. - **RoHS Compliant:** Manufactured in accordance with environmental and safety standards for industrial electronics.

Manufacturer: Contec

Category: Cables and Accessories

35,00 EUR (w/o VAT)
3.4.6
PCB37PS-1.5P - Cable 1,5m shielded with 37pin D-type male at each end
Cable 1,5m shielded with 37pin D-type male at each end PCB37PS-1.5P
Cable 1,5m shielded with 37pin D-type male at each end

- **Shielded Construction:** The cable is fully shielded to minimize electromagnetic interference (EMI) and crosstalk, ensuring stable signal integrity in electrically noisy industrial environments. - **Dual 37‑pin D‑type Male Connectors:** Equipped with precision‑molded 37‑pin D‑sub male connectors on both ends, compatible with CONTEC’s D‑type interface boards and terminal units. - **Standard Length:** 1.5 meters (approx. 59 inches), providing a balance between flexibility and signal integrity for typical rack‑to‑panel or board‑to‑terminal connections. - **Industrial‑Grade Durability:** Designed for continuous operation in automation systems, test benches, and data acquisition setups. - **Compatibility:** Fully compatible with CONTEC’s PCI, CompactPCI, and PC Card digital I/O boards featuring 37‑pin D‑type connectors, including models such as PIO‑16/16L(PCI), PIO‑32/32L(PCI), PI‑32B(PCI), PO‑32L(PCI), and others. - **Plug‑and‑Play Integration:** The cable connects directly between the board and terminal units such as EPD‑37, DTP‑3(PC), DTP‑4(PC), or CM‑32(PC)E without additional adapters. - **Noise‑Resistant Signal Transmission:** The shielded design and high‑quality conductor materials ensure low signal attenuation and high‑speed digital signal fidelity. - **Molded Connector Housings:** Each connector is molded for strain relief and mechanical protection, preventing pin damage and ensuring long‑term reliability. - **RoHS‑Compliant Materials:** Constructed using environmentally safe materials compliant with modern electronic manufacturing standards.

Manufacturer: Contec

Category: Cables and Accessories

35,00 EUR (w/o VAT)
3.4.6
PCB37PS-3P - Cable 3m shielded with 37pin D-type male at each end
Cable 3m shielded with 37pin D-type male at each end PCB37PS-3P
Cable 3m shielded with 37pin D-type male at each end

- **Shielded Construction:** The cable is fully shielded to minimize electromagnetic interference (EMI) and crosstalk, ensuring stable signal integrity even in electrically noisy industrial environments. - **Dual 37-pin D-type Male Connectors:** Equipped with precision-molded 37-pin D-sub male connectors on both ends, compatible with CONTEC’s D-type interface boards and terminal units. - **High Compatibility:** Designed for use with CONTEC’s PCI Bus digital I/O boards, analog I/O boards, counter/motor controller boards, and communication boards that utilize 37-pin D-type connectors. - **Industrial-Grade Durability:** Built for continuous operation in automation systems, test benches, and control panels. - **Standardized Length:** 3.0 meters (model suffix “3P” denotes 3-meter shielded cable). - **Plug-and-Play Integration:** Directly connects between CONTEC boards and terminal units such as EPD-37, DTP-3(PC), DTP-4(PC), or CM-32(PC)E. - **Noise Immunity:** Shielding and grounding design prevent signal degradation due to external electrical noise. - **Flexible Application Range:** Suitable for digital signal transmission, analog signal routing, and control signal interfacing. - **Accessory Ecosystem:** Fully compatible with CONTEC’s accessory lineup including CN5-D37M connectors, DIN-ADP1 DIN-rail adapters, and terminal units.

Manufacturer: Contec

Category: Cables and Accessories

40,00 EUR (w/o VAT)
3.4.6
PCB37PS-5P - Cable 5m shielded with 37pin D-type male at each end
Cable 5m shielded with 37pin D-type male at each end PCB37PS-5P
Cable 5m shielded with 37pin D-type male at each end

- **Fully Shielded Construction:** The cable employs a double-shielded design to minimize electromagnetic interference (EMI) and crosstalk, ensuring stable signal integrity even in electrically noisy industrial environments. - **37-pin D-type Male Connectors:** Equipped with precision-molded 37-pin D-sub male connectors on both ends, compatible with CONTEC’s DCLC-J37SAF-20L9 (JAE) or equivalent connectors used on I/O boards and terminal units. - **High Signal Fidelity:** Designed for accurate transmission of digital and analog signals between interface boards and external devices. - **Industrial-Grade Durability:** Built for continuous operation in automation systems, test benches, and control panels. - **Standardized Compatibility:** Matches the pinout and mechanical specifications of CONTEC’s 37-pin D-type interface boards, terminal units, and accessories. - **Extended Length:** 5.0 meters total cable length, suitable for flexible installation in control cabinets or between rack-mounted systems. - **Plug-and-Play Integration:** No special configuration required; connects directly between compatible CONTEC boards and terminal units. - **RoHS-Compliant Materials:** Manufactured using environmentally safe materials conforming to international standards.

Manufacturer: Contec

Category: Cables and Accessories

50,00 EUR (w/o VAT)
3.4.6
PCB96PS-0.5P - Cable 0,5m shielded with 96pin connector at each end
Cable 0,5m shielded with 96pin connector at each end PCB96PS-0.5P
Cable 0,5m shielded with 96pin connector at each end

- **High-Density 96-Pin Half Pitch Connectors:** Equipped with precision 96-pin half-pitch male connectors on both ends, compatible with CONTEC’s PCI and CompactPCI I/O boards and terminal units. - **Shielded Construction:** The cable is fully shielded to minimize electromagnetic interference (EMI) and crosstalk, ensuring signal integrity in electrically noisy industrial environments. - **Short-Length Configuration (0.5 m):** Optimized for compact installations where minimal cable length reduces signal delay and clutter inside control panels or test setups. - **Industrial-Grade Durability:** Designed for continuous operation in industrial automation systems, offering robust mechanical and electrical performance. - **Compatibility with CONTEC Accessories:** Fully compatible with CONTEC terminal units such as EPD-96, DTP-64(PC), and connector converters like CCB-96. It can also be used with digital I/O boards (e.g., PIO-32/32L(PCI), PI-64L(PCI), PO-64L(PCI)) and analog I/O boards (e.g., AD12-64(PCI)). - **Plug-and-Play Integration:** The cable’s molded connectors ensure secure mating and easy installation without additional assembly. - **Noise Immunity:** Shielding and twisted-pair internal wiring reduce susceptibility to external noise, critical for high-speed digital or analog signal transmission.

Manufacturer: Contec

Category: Cables and Accessories

70,00 EUR (w/o VAT)
3.4.6
PCB96PS-1.5P - Cable 1,5m shielded with 96pin connector at each end
Cable 1,5m shielded with 96pin connector at each end PCB96PS-1.5P
Cable 1,5m shielded with 96pin connector at each end

- **High‑Density 96‑Pin Half‑Pitch Connectors:** Equipped with precision 96‑pin half‑pitch connectors on both ends, ensuring secure mating with CONTEC boards and terminal units such as EPD‑96 or DTP‑64(PC). - **Shielded Construction:** The cable is fully shielded to minimize electromagnetic interference (EMI) and crosstalk, maintaining signal integrity in electrically noisy industrial environments. - **Optimized Length (1.5 m):** Provides a balance between flexibility and signal quality, suitable for rack‑mounted or panel‑mounted configurations. - **Industrial‑Grade Durability:** Designed for continuous operation in automation systems, with robust insulation and strain‑relief features to withstand mechanical stress. - **Plug‑and‑Play Compatibility:** Directly connects CONTEC PCI/PCIe/CompactPCI digital I/O boards to terminal panels, converter boards, or monitoring tools without additional adapters. - **Standardized Interface:** Conforms to CONTEC’s 96‑pin half‑pitch connector standard, ensuring interoperability across multiple product families (Digital I/O, Analog I/O, Counter, and Motor Controller boards). - **Noise Immunity:** Shielded twisted‑pair wiring and grounded connector shells provide superior noise suppression, essential for high‑speed digital signal transmission. - **Flexible Application Range:** Supports both input and output signal routing for opto‑isolated, TTL‑level, or relay‑type I/O boards.

Manufacturer: Contec

Category: Cables and Accessories

70,00 EUR (w/o VAT)
3.4.6
PCB96PS-3P - Cable 3m shielded with 96pin at each end
Cable 3m shielded with 96pin at each end PCB96PS-3P
Cable 3m shielded with 96pin at each end

- **Shielded Construction:** Fully shielded to minimize electromagnetic interference (EMI) and crosstalk, ensuring stable signal integrity in electrically noisy environments. - **High‑Density 96‑Pin Half‑Pitch Connectors:** Equipped with precision‑molded connectors on both ends, compatible with CONTEC’s 96‑pin half‑pitch board interfaces (e.g., PCR‑E96LMD, HDRA‑E100W1L‑FDT1EC‑SL). - **3‑Meter Cable Length:** Provides extended reach for flexible installation between PCI boards and terminal units such as EPD‑96 or DTP‑64(PC). - **Industrial‑Grade Durability:** Designed for continuous operation in industrial automation, measurement, and control applications. - **Plug‑and‑Play Compatibility:** Directly connects CONTEC PCI/CompactPCI digital I/O, analog I/O, counter, and motor control boards to corresponding terminal panels or converter boards. - **Noise‑Resistant Signal Transmission:** Shielding and twisted‑pair internal wiring reduce signal degradation and maintain accurate data transfer. - **Standardized Accessory:** Listed as a standard optional cable for numerous CONTEC PCI Bus Series boards, ensuring guaranteed compatibility and performance.

Manufacturer: Contec

Category: Cables and Accessories

90,00 EUR (w/o VAT)
3.4.6
PCB96PS-5P - Cable 5m shielded with 96pin at each end
Cable 5m shielded with 96pin at each end PCB96PS-5P
Cable 5m shielded with 96pin at each end

- **High‑Density 96‑Pin Half‑Pitch Connectors:** Equipped with precision 96‑pin half‑pitch (Honda Tsushin Kogyo PCR‑E96LMD or equivalent) connectors on both ends, ensuring compatibility with CONTEC PCI and CompactPCI I/O boards. - **Shielded Construction:** Full‑coverage shielding minimizes electromagnetic interference (EMI) and crosstalk, maintaining signal integrity in electrically noisy industrial environments. - **5 m Cable Length:** Provides extended reach for flexible equipment layout while maintaining signal quality over distance. - **Industrial‑Grade Durability:** Designed for continuous operation in automation systems, test benches, and data acquisition setups. - **Plug‑and‑Play Compatibility:** Fully compatible with CONTEC’s digital I/O, analog I/O, counter, and motor control boards that use 96‑pin half‑pitch connectors. - **Standardized Accessory:** Part of CONTEC’s modular accessory ecosystem, ensuring interchangeability with other cable lengths and connector types (1.5 m, 3 m, 5 m variants). - **Noise‑Resistant Signal Transmission:** Shielded twisted‑pair internal wiring reduces susceptibility to external noise and ensures stable digital and analog signal transfer. - **Molded Connector Ends:** Factory‑molded connectors provide strain relief and mechanical robustness, preventing pin damage and ensuring long‑term reliability.

Manufacturer: Contec

Category: Cables and Accessories

110,00 EUR (w/o VAT)
3.4.6
PCB96WS-1.5 - Cable 1,5m shielded with 96pin to 2*37pin D-type male
Cable 1,5m shielded with 96pin to 2*37pin D-type male PCB96WS-1.5
Cable 1,5m shielded with 96pin to 2*37pin D-type male

- **High-Density Interface Conversion:** Converts a 96-pin half-pitch connector to two 37-pin D-sub male connectors, enabling flexible interfacing with external devices or terminal units. - **Shielded Construction:** Employs a 96-core shielded cable (UL2464) to minimize electromagnetic interference (EMI) and ensure signal integrity in industrial environments. - **Industrial-Grade Connectors:** - 96-pin half-pitch female connector: PCR-E96FA (HONDA Tsushin Kogyo) or equivalent. - 37-pin D-sub male connectors: 17JE-23370-02(D1) (DDK) or equivalent. - **Mechanical Reinforcement:** Molded plastic connector housings with thumb screws (UNC #4-40) for secure attachment and vibration resistance. - **Optimized for CONTEC Boards:** Designed for use with CONTEC’s 96-pin half-pitch digital I/O boards such as PIO-32/32L(PCI), PIO-64/64L(PCI), PI-64L(PCI), PO-64L(PCI), and CNT24-4D(PCI). - **High Signal Integrity:** Each conductor is individually shielded within the overall cable shield to reduce crosstalk and maintain signal fidelity. - **Flexible Length Options:** Available in 1.5 m (PCB96WS-1.5), 3.0 m (PCB96WS-3), and 5.0 m (PCB96WS-5) variants. - **Compatibility:** Fully compatible with CONTEC terminal units such as EPD-96, DTP-64(PC), and CCB-96 connector converter boards. - **Industrial Reliability:** Designed for continuous operation in automation systems, test benches, and data acquisition setups.

Manufacturer: Contec

Category: Cables and Accessories

Request a quote
3.4.6
PCB96WS-3 - Cable 3m shielded with 96pin to 2*37pin D-type male
Cable 3m shielded with 96pin to 2*37pin D-type male PCB96WS-3
Cable 3m shielded with 96pin to 2*37pin D-type male

- **Purpose-built Conversion Cable:** Converts a 96-pin half-pitch connector into two 37-pin D-type male connectors, enabling flexible interfacing with peripheral devices, terminal blocks, or signal conditioning units. - **High-Density Shielded Design:** Employs a 96-core shielded cable (AWG #28) to ensure signal integrity and minimize electromagnetic interference (EMI) in industrial environments. - **Industrial-Grade Construction:** Designed for robust performance in automation, measurement, and control systems. - **Compatibility:** Fully compatible with CONTEC’s PCI Bus Series digital I/O boards such as PI-64L(PCI), PO-64L(PCI), PIO-32/32L(PCI), and other 96-pin half-pitch interface models. - **Plug-and-Play Integration:** Provides direct connection between CONTEC boards and terminal units like EPD-96, DTP-64(PC), or converter boards such as CCB-96. - **Shielded Molded Connectors:** Molded connector housings with integral strain relief and shielding for durability and noise suppression. - **Standardized Connector Hardware:** Equipped with UNC #4-40 thumb screws for secure mechanical fastening to mating connectors. - **Multiple Length Options:** Available in 1.5 m, 3.0 m, and 5.0 m variants to accommodate different installation requirements. - **RoHS-Compliant Materials:** Constructed using environmentally safe materials conforming to modern industrial standards.

Manufacturer: Contec

Category: Cables and Accessories

Request a quote
3.4.6
PCB96WS-5 - Cable 5m shielded with 96pin to 2*37pin D-type male
Cable 5m shielded with 96pin to 2*37pin D-type male PCB96WS-5
Cable 5m shielded with 96pin to 2*37pin D-type male

- **Purpose‑built for CONTEC PCI Bus Digital I/O Boards:** Provides direct connectivity between 96‑pin half‑pitch board connectors and external 37‑pin D‑SUB interfaces. - **Dual 37‑pin D‑SUB Male Outputs:** Converts one 96‑pin half‑pitch connector into two 37‑pin D‑SUB male connectors, enabling connection to two 37‑pin terminal units or devices. - **Shielded Construction:** Employs a 96‑core shielded cable (UL2464) to minimize electrical noise and ensure signal integrity in industrial environments. - **High‑Density Half‑Pitch Connector:** Uses a 96‑pin half‑pitch female connector (PCR‑E96FA by HONDA or equivalent) for compact, reliable board connection. - **Industrial‑Grade D‑SUB Connectors:** Two 37‑pin D‑SUB male connectors (17JE‑23370‑02(D1) by DDK or equivalent) with UNC #4‑40 thumb screws for secure attachment. - **Multiple Length Options:** Available in 1.5 m, 3 m, and 5 m variants (PCB96WS‑1.5P, PCB96WS‑3P, PCB96WS‑5P). - **Compatibility:** Designed for use with CONTEC digital I/O boards such as PIO‑32/32L(PCI), PIO‑64/64L(PCI), PI‑64L(PCI), PO‑64L(PCI), and other 96‑pin half‑pitch interface models. - **Noise‑Resistant Shielding:** Full‑length shielding prevents crosstalk and external EMI interference, ensuring reliable high‑speed digital signal transmission. - **Industrial Durability:** Molded connectors and robust cable jacket suitable for factory automation, test systems, and control panels. - **Plug‑and‑Play Accessory:** No configuration required; connects directly between board and terminal units such as EPD‑96, DTP‑64(PC), or CCB‑96.

Manufacturer: Contec

Category: Cables and Accessories

Request a quote
3.4.6
PCE50/37PS-0.5P - Cable 0,5m 50pin Miniature Ribbon -> 37 pin D-SUB Conversion
Cable 0,5m 50pin Miniature Ribbon -> 37 pin D-SUB Conversion PCE50/37PS-0.5P
Cable 0,5m 50pin Miniature Ribbon -> 37 pin D-SUB Conversion

- **Conversion Functionality:** Converts a 50-pin miniature ribbon connector (board side) to a 37-pin D-SUB connector (device side). - **Cable Length:** 0.5 meters (nominal). - **Shielded Construction:** Double-shielded design minimizes electromagnetic interference (EMI) and ensures signal integrity in industrial environments. - **Molded Connectors:** Factory-molded terminations provide strain relief and mechanical durability. - **Industrial-Grade Materials:** Designed for long-term reliability in automation, measurement, and control systems. - **Compatibility:** Specifically designed for CONTEC’s Low Profile PCI digital I/O boards such as PIO-16/16B(LPCI)H, PIO-16/16L(LPCI)H, and PIO-16/16T(LPCI)H. - **Plug-and-Play Integration:** Enables direct connection between digital I/O boards and terminal units (e.g., EPD-37, DTP-3(PC), DTP-4(PC)). - **Signal Integrity:** Maintains accurate digital signal transmission across all channels with minimal crosstalk. - **Compact Form Factor:** Ideal for confined installation spaces within control cabinets or PC enclosures. - **Compliance:** Manufactured to meet industrial electrical and mechanical standards for PCI-based I/O systems.

Manufacturer: Contec

Category: Cables and Accessories

48,00 EUR (w/o VAT)
3.4.6
PCKA96 - 96 pin Kabel 50paarig rund, 10m
96 pin Kabel 50paarig rund, 10m PCKA96
96 pin Kabel 50paarig rund, 10m

- **High‑Density 96‑Pin Half‑Pitch Interface:** Supports connection to CONTEC PCI and CompactPCI digital I/O boards equipped with 96‑pin half‑pitch connectors (e.g., PI‑64L(PCI), PO‑64L(PCI), PIO‑32/32L(PCI), PIO‑64/64L(PCI), etc.). - **50‑Pair Round Cable Construction:** Comprises 50 twisted pairs (100 conductors total) arranged in a round, shielded configuration for optimal signal integrity and reduced crosstalk. - **Extended Length (10 m):** Provides long‑distance connectivity between PC‑based I/O boards and remote terminal panels or devices, suitable for large control cabinets or distributed installations. - **Industrial‑Grade Shielding:** Double‑shielded design minimizes electromagnetic interference (EMI) and radio‑frequency interference (RFI), ensuring stable digital signal transmission in noisy industrial environments. - **High‑Reliability Connectors:** Equipped with precision 96‑pin half‑pitch connectors (female/male as required) compatible with HONDA Tsushin Kogyo PCR‑E96LMD or equivalent mating connectors. - **Compatibility with Multiple Accessories:** Designed for use with CONTEC terminal units such as EPD‑96, DTP‑64(PC), and connector converters like CCB‑96, as well as emulator and monitoring tools (CM‑64(PC)E). - **Optimized for PCI Bus Digital I/O Boards:** Fully compatible with CONTEC’s PCI Bus Series boards supporting 32‑bit, 33 MHz PCI interface, including opto‑isolated, TTL‑level, and relay‑output models. - **Durable Industrial Construction:** Ruggedized insulation and strain‑relief design suitable for continuous operation in factory automation, process control, and test system environments.

Manufacturer: Contec

Category: Cables and Accessories

Request a quote
3.4.6
PCPBU96 - 96 pin half pitch D-type female for PCB mounting
96 pin half pitch D-type female for PCB mounting PCPBU96
96 pin half pitch D-type female for PCB mounting

- **High‑Density 96‑Pin Interface:** Provides compact, high‑pin‑count connectivity for digital and analog I/O boards. - **Half‑Pitch D‑Type Format:** Uses a 0.635 mm (half‑pitch) contact spacing, allowing reduced connector footprint while maintaining mechanical robustness. - **Female Connector for PCB Mounting:** Designed for direct soldering onto printed circuit boards, ensuring secure mechanical and electrical connection. - **Compatibility with Contec PCI Bus Boards:** Fully compatible with Contec’s PCI‑based digital I/O boards such as PI‑64L(PCI), PO‑64L(PCI), PIO‑32/32L(PCI), and others using 96‑pin half‑pitch interfaces. - **Industrial‑Grade Reliability:** Engineered for industrial automation environments requiring stable signal integrity and long‑term durability. - **Supports Multiple Signal Types:** Suitable for TTL‑level, opto‑isolated, and open‑collector I/O circuits depending on the board configuration. - **Standardized Accessory Interface:** Matches Contec’s accessory ecosystem including terminal units (EPD‑96, DTP‑64(PC)), converter boards (CCB‑96), and shielded/flat cables (PCB96PS, PCA96PS, PCB96W). - **Ease of Integration:** Enables straightforward connection between PCI I/O boards and external control or measurement devices. - **RoHS‑Compliant Construction:** Manufactured using lead‑free materials in compliance with environmental directives.

Manufacturer: Contec

Category: Cables and Accessories

Request a quote