- **8 Additional Voltage Output Channels:** Expands the PCI‑6208V from 8 to 16 channels, forming the PCI‑6216V configuration. - **High‑Resolution Analog Output:** 16‑bit resolution with 15‑bit guaranteed monotonicity for precise voltage generation. - **Wide Output Range:** ±10 V bipolar output range suitable for a variety of analog control and signal generation tasks. - **Fast Response:** Typical 4 µs settling time for a 20 V step and 10 V/µs slew rate, ensuring rapid and stable output transitions. - **Low Error and High Accuracy:** Gain error within ±0.2% (maximum) and differential non‑linearity (DNL) of ±0.65 LSB typical. - **Stable Power‑On Behavior:** On‑board analog switches minimize power‑on glitches; outputs default to 0 V at startup. - **Compact and Modular Design:** Daughterboard form factor designed for direct connection to the PCI‑6208V main card. - **Industrial‑Grade Reliability:** Operating temperature range of 0 °C to 50 °C and humidity tolerance up to 95% non‑condensing. - **Compatibility:** Fully compatible with ADLINK’s PCI‑6208V and PCI‑6208A series cards and associated software libraries. - **Applications:** Ideal for automatic test equipment (ATE), process control, servo control, and signal generation systems.

Hersteller: Adlink Technology Inc.

Kategorie: D/A General Purpose PCI

- **High-Resolution Analog Output:** Four 16-bit DAC channels with simultaneous update capability and a maximum update rate of 1 MS/s per channel. - **Excellent Linearity and Accuracy:** Differential nonlinearity (DNL) < ±1 LSB, offset error ±0.3 mV, and gain error ±0.06 mV after calibration. - **Fast Response:** Settling time < 3 µs, slew rate 20 V/µs, rise time 0.67 µs, and fall time 0.705 µs. - **Wide Output Range:** ±10 V bipolar output range with ±5 mA drive capability. - **Comprehensive Digital I/O:** 16 isolated digital inputs and 16 isolated digital outputs (2500 Vrms isolation), plus 8 TTL DI and 8 TTL DO channels. - **Encoder and PWM Support:** Three isolated encoder inputs (CW/CCW, x1/x2/x4 AB phase) and four PWM outputs with programmable duty cycles (1–99%) and frequencies from 20 MHz to 0.005 Hz. - **General-Purpose Timer/Counter:** Two 32-bit counters with internal 80 MHz or external 10 MHz clock sources. - **Advanced Triggering:** Supports software and external digital triggers, post-trigger, delay-trigger, and retrigger modes. - **Hardware-Timed Waveform Generation:** Onboard FIFO (512 samples shared across channels) and DMA support for continuous waveform output. - **Universal PCI Interface:** Compatible with both 3.3 V and 5 V PCI slots. - **Comprehensive Software Support:** Includes DAQPilot SDK, DAQMaster device manager, and legacy PCIS-DASK drivers for Windows. - **Robust Isolation and Protection:** 2500 Vrms isolation for digital I/O and encoder channels, ensuring reliable operation in industrial environments.

Hersteller: Adlink Technology Inc.

Kategorie: D/A General Purpose PCI

- **Bus Interface:** 32-bit PCI bus, compatible with both 3.3 V and 5 V signaling. - **Analog Output Channels:** 8 independent channels supporting both voltage and current output. - **Resolution:** 16-bit D/A conversion for voltage output; effective 15-bit resolution for current output. - **Output Ranges:** - Voltage: ±10 V bipolar range. - Current: 0–20 mA, 4–20 mA, 5–25 mA (software programmable). - **Settling Time:** 17 µs typical for current output (20 mA step); 130 µs typical for voltage output (20 V step). - **Slew Rate:** 1.3 mA/µs (current output); 26 V/µs (voltage output). - **Output Drive Capability:** ±5 mA maximum for voltage output. - **Digital I/O:** 4 TTL-compatible digital inputs and 4 TTL-compatible digital outputs. - **Plug and Play:** Fully PCI Plug-and-Play compliant; automatic resource allocation by BIOS. - **Software Support:** Compatible with Windows 7/8 (x86/x64) and Linux; drivers and SDKs available for LabVIEW™, MATLAB®, C/C++, Visual Basic, and Visual Studio .NET. - **Form Factor:** Standard PCI card (175 mm × 107 mm). - **Connector:** One 37-pin D-sub female connector for analog and digital I/O. - **Power Supply:** +5 V and +12 V DC rails from PCI bus; onboard DC/DC converter for current output circuitry. - **Calibration:** Factory-calibrated with precision DMM; supports re-calibration for long-term accuracy. - **Safety and Reliability:** Designed for industrial environments with 0–50°C operating range and 5–95% non-condensing humidity tolerance.

Hersteller: Adlink Technology Inc.

Kategorie: D/A General Purpose PCI

- **High-Resolution Analog Output:** 8 independent 16-bit DAC channels with ±10 V output range and 15-bit guaranteed monotonicity. - **Fast Response:** Typical settling time of 2–4 µs for a full-scale (20 V) step, with a slew rate of 10–25 V/µs depending on model revision. - **Stable Power Supply:** On-board DC/DC converter ensures stable analog power rails and minimizes noise and power-on glitches. - **Digital I/O Support:** 4 TTL-compatible digital input channels and 4 TTL-compatible digital output channels for auxiliary control and status monitoring. - **High Accuracy:** Gain error within ±0.2% (max), differential nonlinearity (DNL) ±0.65 LSB typical, and integral nonlinearity (INL) ±2.5 LSB typical. - **Output Drive Capability:** ±5 mA maximum per channel, suitable for driving moderate loads directly. - **Software Programmable:** Fully programmable via ADLINK’s software libraries and drivers for Windows and Linux environments. - **Plug and Play PCI Interface:** 32-bit PCI bus interface with automatic resource allocation (PnP BIOS compliant). - **Compact Design:** Half-size PCI card (175 mm × 107 mm) with a 37-pin D-sub female connector for all analog and digital I/O signals. - **Compatibility:** Fully compatible with ADLINK’s DAQPilot, PCIS-DASK, and third-party environments such as MATLAB®, LabVIEW™, and Agilent VEE™.

Hersteller: Adlink Technology Inc.

Kategorie: D/A General Purpose PCI

- **Bus Interface:** 32-bit 3.3 V or 5 V PCI bus, Plug and Play compliant. - **Analog Outputs:** 8 independent voltage output channels, each with a dedicated 16-bit DAC. - **Resolution:** 16-bit D/A conversion with 15-bit guaranteed monotonicity. - **Output Range:** Bipolar ±10 V voltage output range. - **Output Drive Capability:** ±5 mA maximum per channel. - **Settling Time:** 130 µs typical for a 20 V step. - **Slew Rate:** 25–26 V/µs typical. - **Gain Error:** ±0.2% maximum. - **Differential Nonlinearity (DNL):** ±1 LSB typical. - **Digital I/O:** 4 TTL-compatible digital inputs and 4 TTL-compatible digital outputs. - **Operating Systems Supported:** Windows 7/8 (x86/x64) and Linux. - **Software Support:** Drivers and SDKs for LabVIEW™, MATLAB®, C/C++, Visual Basic, and Visual Studio.NET. - **Form Factor:** Standard PCI card, 175 mm x 107 mm PCB dimensions. - **Connector:** One 37-pin D-sub female connector for analog and digital I/O. - **Power Supply:** +5 VDC at 650 mA typical, +12 VDC at 170 mA typical. - **Compatibility:** 100% backward compatible with PCI-6208V. - **Additional Features:** Onboard DC/DC converter, plug-and-play configuration, and robust calibration support.

Hersteller: Adlink Technology Inc.

Kategorie: D/A General Purpose PCI

- **High‑Density Analog Output:** 16 independent voltage output channels, each with 16‑bit resolution and ±10 V range. - **High Precision and Stability:** Utilizes Burr‑Brown PCM56U or equivalent monolithic multiplying DACs with ultra‑stable NiCr thin‑film resistors ensuring monotonicity, low distortion, and minimal differential linearity error. - **Fast Response:** Typical settling time of 2 µs for a full‑scale (‑10 V to +10 V) step; slew rate up to 10 V/µs (typical). - **Excellent Accuracy:** Gain error ±0.2 % maximum; differential non‑linearity ±0.65 LSB typical; monotonicity guaranteed to 15 bits. - **Integrated Power Conversion:** Onboard DC‑to‑DC converter provides isolated ±15 V analog supply rails, ensuring stable operation and reduced noise coupling from the PCI bus. - **Digital I/O Support:** Four TTL‑compatible digital inputs and four TTL‑compatible digital outputs for auxiliary control and status signaling. - **Plug‑and‑Play PCI Interface:** Fully compliant with 32‑bit PCI bus specifications; automatic resource allocation via BIOS (PnP). - **Software Support:** Compatible with ADLINK DAQPilot, DAQMaster, and legacy PCIS‑DASK drivers; supports Windows and Linux environments; integrates with MATLAB®, LabVIEW™, VEE™, and ActiveX® environments. - **Calibration and Utility Tools:** Includes DOS‑based 6208UTIL.EXE for functional testing and calibration; supports fine adjustment of full‑scale and offset per channel.

Hersteller: Adlink Technology Inc.

Kategorie: D/A General Purpose PCI

- **16‑Channel, 16‑Bit Analog Voltage Outputs:** Provides 16 independent voltage output channels with 16‑bit resolution for high‑precision signal generation. - **Universal PCI Interface:** Supports both 3.3 V and 5 V, 32‑bit PCI bus standards, ensuring compatibility with a wide range of industrial PCs. - **High Accuracy and Stability:** ±0.2% maximum gain error, ±1 LSB typical DNL, and 130 µs typical settling time for a 20 V step. - **Bipolar Output Range:** ±10 V output range suitable for control and simulation applications. - **Integrated Digital I/O:** 4 TTL digital inputs and 4 TTL digital outputs for auxiliary control and status monitoring. - **Dedicated DAC per Channel:** Each channel uses a dedicated 16‑bit DAC (e.g., BB PCM56U or equivalent) for simultaneous and independent updates. - **Fast Slew Rate:** 26 V/µs typical, enabling rapid signal transitions. - **Plug‑and‑Play Configuration:** Automatic resource allocation via PCI PnP BIOS, no manual jumper settings required. - **Software Support:** Compatible with Windows 7/8 (x86/x64) and Linux; drivers and SDKs available for LabVIEW™, MATLAB®, C/C++, Visual Basic, and Visual Studio .NET. - **Built‑in DC/DC Converter:** Ensures stable internal power for analog circuitry. - **Compact Design:** 175 mm × 107 mm PCB size, 37‑pin D‑sub connector interface. - **Backward Compatibility:** Fully compatible with earlier PCI‑6216V hardware and software.

Hersteller: Adlink Technology Inc.

Kategorie: D/A General Purpose PCI

- **8 Analog Output Channels:** Each channel supports independent configuration for voltage or current output modes. - **12-bit Resolution:** Ensures fine granularity and precision in analog signal generation. - **Sampling Rate:** Up to **15 kS/s (15,000 samples per second)** per channel, suitable for medium-speed control and waveform generation applications. - **Double-Buffered Architecture:** Each DA channel includes a double-buffered output register, allowing seamless data updates without output glitches. - **Selectable Output Ranges:** - Voltage output: ±5 V, ±10 V, 0–5 V, 0–10 V - Current output: 4–20 mA (sink mode) Each channel can be individually configured for the desired range. - **Fast Output Response:** Typical update time of **

Hersteller: Keine Kategorie

Kategorie: D/A General Purpose ISA

- **Six Analog Output Channels:** Each channel features a 12‑bit resolution D/A converter (DAC7541AJP or equivalent) with double‑buffered architecture for smooth, single‑step updates. - **Multiple Output Ranges:** Configurable per channel for unipolar (0–5 V, 0–10 V), bipolar (±5 V, ±10 V), or current loop (4–20 mA sink) operation. - **Fast Conversion Performance:** Maximum settling time of 70 µs ensures rapid analog output updates suitable for dynamic control systems. - **Digital I/O Capability:** 16 digital input and 16 digital output channels, all TTL/DTL compatible, supporting standard 74/74LS logic levels. - **Enhanced Interrupt Support:** Selectable IRQ levels (IRQ3–IRQ15) triggered by external digital input (pin 17 of CN3). - **Compatibility:** Register structure fully compatible with Advantech PCL‑726, simplifying software migration. - **Robust Design:** Surface‑mount technology (SMT) construction for improved reliability and reduced noise susceptibility. - **Compact Form Factor:** Half‑size ISA card (163 mm × 123 mm) suitable for standard PC/AT chassis. - **Software Support:** Includes DOS programming library (ACLS‑DLL2) and LabVIEW driver (ACLS‑LVIEW) for Windows 95/98/NT environments. - **Automatic Safe State:** All D/A outputs reset to 0 V upon power‑on or system reset.

Hersteller: Adlink Technology Inc.

Kategorie: D/A General Purpose ISA

- **Eight Analog Output Channels:** Provides 8 independent DA channels for simultaneous or sequential analog signal generation. - **12-bit Resolution:** Ensures fine granularity and high precision in analog output signals, suitable for control and measurement applications. - **Sampling Rate:** Capable of up to 33 kS/s (33,000 samples per second), enabling smooth waveform generation and responsive control. - **Multiple Output Ranges:** Configurable output voltage and current ranges including 0–5 V, 0–10 V, ±2.5 V, ±5 V, and 4–20 mA, supporting a wide variety of analog devices and sensors. - **ISA Bus Interface:** Designed for standard ISA bus architecture, ensuring compatibility with legacy industrial PC systems. - **Windows Driver Support:** Includes a Windows-compatible driver for easy integration with modern software environments and application development platforms. - **50-Pin Connector:** Utilizes a standard 50-pin connector for reliable signal transmission and easy interfacing with external equipment or terminal boards. - **Industrial Form Factor:** Compact and robust design (334 mm × 99 mm) optimized for installation in industrial PC chassis. - **Manufacturer Reliability:** Produced by Axiom, known for high-quality industrial I/O and data acquisition hardware.

Hersteller: Axiom

Kategorie: D/A General Purpose ISA

6 DA ISA card 12bit 33 kS/s, output 0..5/1..10V/±5/10V/4..20mA, windows driver available, 37pin connector, half size, Axiom

Hersteller: Axiom

Kategorie: D/A General Purpose ISA

8 DA ISA card 12bit 33 kS/s, output 0..5/1..10V/±5/10V/4..20mA, windows driver available, 37pin connector, half size, Axiom

Hersteller: Axiom

Kategorie: D/A General Purpose ISA

- **Four Analog Output Channels:** Provides four independent analog output channels for simultaneous signal generation or control. - **12-bit Resolution:** Ensures fine granularity and precision in analog signal output, suitable for control and measurement tasks requiring accurate voltage or current levels. - **Sampling Rate:** Capable of up to **33 kS/s (kilosamples per second)** per channel, supporting dynamic signal generation and real-time control applications. - **Multiple Output Ranges:** Configurable output ranges include **0–5 V**, **0–10 V**, **±2.5 V**, **±5 V**, **±10 V**, and **4–20 mA**, allowing compatibility with a wide range of sensors, actuators, and control systems. - **Digital I/O Capability:** Provides **32 digital I/O channels**, divided into **24 8255-compatible digital I/O lines** and **8 bidirectional TTL I/O lines**, enabling flexible digital control and monitoring. - **Interrupt Support:** Supports **IRQs 2–7**, allowing hardware interrupt-driven operation for time-critical applications. - **Connector Interface:** Equipped with **two 50-pin connectors**, facilitating easy integration with external devices, breakout boards, or terminal panels. - **Compact Form Factor:** Dimensions of **334 mm × 99 mm**, suitable for standard industrial PC or rack-mount installations. - **Operating System Support:** Includes **Windows driver**, simplifying integration with PC-based control and data acquisition systems. - **Industrial-Grade Design:** Built for reliability and long-term operation in demanding environments, with robust electrical characteristics and stable performance.

Hersteller: Axiom

Kategorie: D/A General Purpose ISA

- **Six Independent Analog Output Channels:** Each channel provides 12-bit resolution for precise voltage or current output control. - **High-Speed Conversion:** Capable of up to **250 kS/s** total throughput, enabling fast waveform generation and real-time control. - **Multiple Output Ranges:** Supports configurable output ranges of **±2.5 V, ±5 V, ±10 V, 0–5 V, 0–10 V**, and **4–20 mA**, allowing compatibility with a wide range of analog devices and sensors. - **24 Bidirectional TTL Digital I/O Lines:** Provides flexible digital interfacing for control, monitoring, and synchronization tasks. - **Compact Form Factor:** The board measures **334 mm × 108 mm**, suitable for standard PC expansion slots and industrial enclosures. - **Standard D-type 37-pin Male Connector:** Ensures robust and standardized connectivity for analog and digital signals. - **Stable Power Requirements:** Operates from **+5 VDC (550 mA)**, **+12 V (180 mA)**, and **–12 V (180 mA)** power rails, compatible with standard PC power supplies. - **High Accuracy and Low Noise:** 12-bit resolution ensures fine granularity in output voltage or current, suitable for precision control applications. - **Industrial-Grade Reliability:** Designed for continuous operation in demanding environments, with robust electrical isolation and noise immunity.

Hersteller: Contec

Kategorie: D/A General Purpose ISA

- **Eight Analog Output Channels:** Provides eight independent DA output channels for simultaneous or sequential analog signal generation. - **12-bit Resolution:** Ensures fine granularity and precision in analog voltage output, suitable for control and measurement tasks requiring high accuracy. - **High-Speed Conversion:** Supports up to **100 kS/s** (100,000 samples per second) total throughput, enabling fast and responsive analog signal updates. - **Multiple Output Ranges:** Configurable output voltage ranges of **±5 V**, **±10 V**, and **0–10 V**, plus a **4–20 mA current output** available on one channel for current-loop control applications. - **Integrated Digital I/O:** Includes **4 TTL-level digital inputs** and **4 TTL-level digital outputs**, allowing mixed-signal control and synchronization with external devices. - **Compact PCI Interface:** Designed for PC-based systems, compatible with standard expansion slots, and optimized for industrial and laboratory environments. - **High Stability and Low Noise:** Precision analog circuitry ensures stable output with minimal drift and noise interference. - **Standard Connector Interface:** Equipped with a **D-Sub 37-pin female connector** for secure and standardized signal interfacing. - **Low Power Consumption:** Operates from a **5 VDC supply at 830 mA**, minimizing system power load. - **Compact Form Factor:** Board dimensions of **160 mm × 122 mm**, suitable for integration into compact PC enclosures or embedded systems.

Hersteller: Contec

Kategorie: D/A General Purpose ISA

- **Four Analog Output Channels:** Provides four independent DA channels for simultaneous or individual analog signal generation. - **High Resolution:** 16-bit digital-to-analog conversion ensures fine granularity and precision in output voltage levels. - **High-Speed Conversion:** Capable of up to **75 kS/s** (75,000 samples per second) per channel, suitable for dynamic signal generation and control loops. - **Flexible Output Ranges:** Supports both **±10 V** and **0–10 V** output voltage ranges, selectable per channel for compatibility with a wide range of analog devices. - **Dual 16-bit Timers:** Two integrated 16-bit programmable timers enable precise timing control, waveform generation, and synchronization with external events. - **DMA and Interrupt Support:** Compatible with **DMA channels 0, 1, and 3** and **IRQ lines 3, 5, 7, 9, 10–12, and 15**, allowing efficient data transfer and flexible system integration. - **Standard PC Interface:** Designed for PC/AT or compatible systems, ensuring straightforward integration into existing industrial PCs. - **Compact Design:** 160 mm × 122 mm PCB size fits standard expansion slots while maintaining robust mechanical stability. - **Industrial-Grade Reliability:** Built for continuous operation in demanding environments, with stable analog performance and low noise characteristics. - **Connector Type:** Equipped with a **D-Sub 37-pin female connector** for secure and standardized signal interfacing.

Hersteller: Contec

Kategorie: D/A General Purpose ISA

- **8 Independent Analog Output Channels:** Provides eight separate DA outputs for simultaneous or sequential analog signal generation. - **12-bit Resolution:** Ensures fine granularity and precision in voltage output, suitable for control and instrumentation tasks requiring accurate analog representation. - **Sampling Rate:** Capable of up to **10 kS/s**, enabling smooth waveform generation and responsive control loops. - **Output Voltage Range:** Each channel supports a **0 to +10 V** output range, compatible with standard industrial analog input devices and controllers. - **ISA Bus Interface:** Designed for legacy and embedded systems using the **ISA (Industry Standard Architecture)** bus, ensuring compatibility with a wide range of industrial PCs and control systems. - **Connector Type:** Equipped with a **25-pin D-type female connector**, providing a robust and standardized interface for signal output. - **Included Accessories:** Supplied with a **1-meter flat cable** and a **connector board**, simplifying integration and wiring in control panels or test setups. - **Compact Form Factor:** The card’s dimensions of **334 mm × 104 mm** allow installation in standard ISA slots without obstructing adjacent components. - **Industrial-Grade Design:** Built for reliability and long-term operation in demanding environments such as manufacturing automation, process control, and laboratory instrumentation.

Hersteller: Keine Kategorie

Kategorie: D/A General Purpose ISA

- **High‑speed analog output:** 4 channels, 12‑bit resolution, up to 1 MS/s simultaneous update rate. - **Analog input capability:** 8 single‑ended channels, 14‑bit resolution, up to 400 kS/s sampling rate. - **Fully auto‑calibrating architecture:** Internal 14‑bit calibration DAC with ±2 ppm/°C reference stability. - **Programmable voltage ranges:** Bipolar ±10 V or unipolar 0–10 V, with optional external reference per channel. - **Hardware‑based arbitrary waveform generation:** Onboard 8 k‑sample D/A FIFO buffer for continuous or iterative waveform output. - **Scatter‑gather DMA:** High‑throughput, low‑CPU‑load data transfer for both A/D and D/A operations. - **Digital I/O:** 24 TTL‑compatible programmable lines (Intel 8255 PIO compatible). - **Timer/Counter:** Two 16‑bit general‑purpose up/down counters with 40 MHz internal or up to 10 MHz external clock. - **Triggering:** Software, external digital, external analog, or SSI (System Synchronization Interface) triggers; supports post‑trigger, delay‑trigger, and retrigger modes. - **Synchronization:** Multi‑card synchronization via SSI bus or PXI trigger bus. - **Auto‑calibration:** Internal precision 5 V reference, ±2 ppm/°C, with software‑controlled calibration constants stored in EEPROM. - **Software ecosystem:** Drivers and SDKs for Windows 7/8 x86/x64 and Linux; supports LabVIEW®, MATLAB®, C/C++, Visual Basic, and .NET. - **Utility software:** AD‑Logger for data logging and configuration. - **Plug‑and‑play PCI Express interface:** Automatic resource configuration, no jumpers required. - **Environmental robustness:** 0 °C – 55 °C operating range, 5 – 95 % RH non‑condensing.

Hersteller: Adlink Technology Inc.

Kategorie: D/A Intelligent PCIe

- **High‑speed analog output:** 8 channels, 12‑bit resolution, up to 1 MS/s simultaneous update rate. - **Analog input capability:** 4 single‑ended channels, 14‑bit resolution, up to 400 kS/s sampling rate. - **Dual‑function operation:** Supports both waveform generation and signal acquisition on the same board. - **Auto‑calibration:** Fully automatic internal calibration using a precision 5 V reference (±2 ppm/°C). - **Flexible voltage ranges:** Bipolar ±10 V or unipolar 0–10 V ranges; external reference up to ±10 V per channel. - **Large onboard buffers:** 16 k‑sample D/A FIFO and 2 k‑sample A/D FIFO for continuous streaming. - **Scatter‑gather DMA:** Hardware bus‑mastering DMA for high‑throughput, low‑CPU‑load data transfer. - **Digital I/O:** 24 TTL/CMOS‑compatible programmable lines (Intel 8255 PIO‑compatible). - **Timer/Counter:** Two 16‑bit general‑purpose up/down counters with 40 MHz internal or 10 MHz external clock. - **Triggering:** Software, external digital, external analog, or SSI (System Synchronization Interface) triggers. - **Synchronization:** Multi‑card synchronization via SSI bus or PXI trigger bus. - **Software ecosystem:** Drivers and SDKs for Windows 7/8 x86/x64 and Linux; supports LabVIEW, MATLAB, C/C++, Visual Basic, and Visual Studio .NET. - **Utility software:** AD‑Logger for data logging and visualization. - **Plug‑and‑play PCIe:** Automatic resource configuration, no jumpers required. - **Comprehensive protection:** ±30 V overvoltage protection on analog inputs, short‑circuit protection on outputs. - **Compact design:** 168 × 107 mm PCIe card with 68‑pin VHDCI connector.

Hersteller: Adlink Technology Inc.

Kategorie: D/A Intelligent PCIe

- **High-Speed Analog Output:** - 4 analog output channels, 12-bit resolution, up to 1 MS/s update rate. - Programmable output ranges: ±10 V, 0–10 V, or external reference (±AOEXTREF). - Hardware-based arbitrary waveform generation with onboard 8K-sample FIFO. - **Analog Input Capability:** - 8 single-ended analog input channels, 14-bit resolution, up to 400 kS/s sampling rate. - Bipolar (±10 V) and unipolar (0–10 V) input ranges. - Onboard 2K-sample A/D FIFO buffer. - **Digital I/O and Counter Functions:** - 24-channel TTL/CMOS-compatible digital I/O (8255 programmable). - 2-channel, 16-bit general-purpose timer/counter with 40 MHz base clock. - **Triggering and Synchronization:** - Supports software, external digital, and analog triggers. - System Synchronization Interface (SSI) for multi-card synchronization. - Post-trigger, delay-trigger, and retrigger modes for both A/D and D/A operations. - **Auto-Calibration:** - Fully automatic internal calibration using a 5 V reference (±2 ppm/°C). - No external reference required for calibration. - **Bus Interface and Compatibility:** - 32-bit PCI bus (3.3 V or 5 V signaling). - Plug-and-play configuration with automatic IRQ and address assignment. - **Software and OS Support:** - Drivers for Windows 7/8 (x86/x64) and Linux. - SDKs for LabVIEW, MATLAB, C/C++, Visual Basic, and Visual Studio.NET. - AD-Logger utility for data logging and visualization. - **Robust Design:** - Short-circuit protection, ±30 V overvoltage protection on inputs. - Compact PCI form factor with 68-pin VHDCI connector.

Hersteller: Adlink Technology Inc.

Kategorie: D/A Intelligent PCI

- **High‑speed analog output:** 8 channels, 12‑bit resolution, up to **1 MS/s** per channel. - **Analog input capability:** 4 single‑ended channels, 14‑bit resolution, up to **400 kS/s** sampling rate. - **Simultaneous waveform generation:** Hardware‑based arbitrary waveform generation with onboard FIFO buffering. - **Auto‑calibration:** Fully automatic internal calibration using a precision 5 V reference (±2 ppm/°C). - **Programmable voltage ranges:** Bipolar (±10 V) and unipolar (0–10 V) ranges for both input and output. - **Flexible triggering:** Supports software, external digital, external analog, and SSI (System Synchronization Interface) triggers. - **Scatter‑gather DMA:** High‑speed data transfer for both A/D and D/A operations with minimal CPU load. - **Digital I/O:** 24‑channel TTL/CMOS‑compatible programmable I/O (8255‑compatible). - **Timer/Counter:** Two 16‑bit general‑purpose up/down counters with 40 MHz internal or 10 MHz external clock. - **Synchronization:** Multiple‑card synchronization via SSI bus or PXI trigger bus. - **Software support:** Drivers and SDKs for Windows and Linux; compatible with LabVIEW®, MATLAB®, C/C++, Visual Basic, and .NET. - **Plug‑and‑play PCI configuration:** No jumpers required; automatic IRQ and address assignment. - **Compact design:** 175 mm × 107 mm PCI form factor with 68‑pin VHDCI connector.

Hersteller: Adlink Technology Inc.

Kategorie: D/A Intelligent PCI

- **High-Speed Analog Output:** 8 channels of 12-bit resolution with a maximum update rate of 1 MS/s per channel. Programmable output ranges: ±10 V, 0–10 V, or external reference (±AOEXTREF / 0–AOEXTREF). - **Analog Input Capability:** 4 single-ended 14-bit analog input channels with a maximum sampling rate of 400 kS/s. Input ranges: ±10 V or 0–10 V, DC coupling, 1 GΩ input impedance. - **Digital I/O:** 24-channel TTL-compatible programmable digital I/O (8255 PIO compatible). - **Timer/Counter:** Two 16-bit general-purpose up/down counters with 40 MHz internal or up to 10 MHz external clock. - **Auto-Calibration:** Fully automatic internal calibration using a precision 5 V reference (±2 ppm/°C). - **Triggering and Synchronization:** Software, external analog/digital, and SSI (System Synchronization Interface) triggers supported. Supports post-trigger, delay-trigger, and repeated trigger modes. - **FIFO Buffers:** 16 k-sample D/A FIFO and 2 k-sample A/D FIFO for efficient data streaming. - **Bus Interface:** 32-bit PCI bus, 3.3 V or 5 V signaling, plug-and-play configuration. - **Software and OS Support:** Compatible with Windows 7/8 (x86/x64) and Linux. Drivers and SDKs for LabVIEW, MATLAB, C/C++, Visual Basic, and Visual Studio.NET. - **Utility Software:** Includes AD-Logger for data logging and visualization. - **Form Factor:** Standard PCI card, 175 mm × 107 mm, 68-pin VHDCI connector.

Hersteller: Adlink Technology Inc.

Kategorie: D/A Intelligent PCI

- **8 Analog Output Channels:** Supports both voltage and current output modes. - **High Resolution:** 16-bit D/A resolution for precise analog signal generation. - **Programmable Output Ranges:** - Voltage: ±10 V - Current: 0–20 mA, 4–20 mA, 5–25 mA - **Fast Settling Time:** 17 µs typical for current output (20 mA step), 130 µs typical for voltage output (20 V step). - **High Slew Rate:** 26 V/µs (voltage), 1.3 mA/µs (current). - **Integrated DC/DC Converter:** Provides isolated power for stable analog performance. - **Digital I/O Support:** 4 TTL-compatible digital inputs and 4 TTL-compatible digital outputs. - **CompactPCI Bus Interface:** 32-bit, 3U Eurocard form factor, PICMG 2.0 R2.1 compliant. - **Plug-and-Play Configuration:** Automatic resource allocation via PCI BIOS. - **Software Support:** Compatible with Windows 7/8 (x86/x64) and Linux; drivers and SDKs available for LabVIEW™, MATLAB®, C/C++, Visual Basic, and Visual Studio .NET. - **High Accuracy:** Gain error ±0.2% (voltage), span error ±0.3% (current). - **Monotonicity:** 15-bit typical for voltage, 14-bit typical for current. - **Output Drive Capability:** ±5 mA maximum for voltage outputs. - **Compact Form Factor:** 3U Eurocard (100 mm × 160 mm).

Hersteller: Adlink Technology Inc.

Kategorie: D/A Intelligent PXI/cPCI

- **High‑Resolution Analog Output:** 8 independent 16‑bit D/A channels for precise voltage or current signal generation. - **Multiple Output Ranges:** Software‑selectable ranges of ±10 V, 0–20 mA, 4–20 mA, and 5–25 mA. - **Rear I/O Configuration:** Rear I/O interface for CompactPCI backplane integration, minimizing front‑panel cabling. - **Fast Settling Time:** 17 µs typical (20 mA step) for current output; 130 µs typical (20 V step) for voltage output. - **Integrated DC/DC Converter:** Provides isolated power for analog circuitry, enhancing signal integrity. - **Digital I/O Support:** 4‑channel TTL digital inputs and 4‑channel TTL digital outputs for auxiliary control. - **Plug‑and‑Play PCI Configuration:** Fully compliant with PCI PnP standards; automatic resource allocation via BIOS. - **High Accuracy and Linearity:** Gain error ±0.2% max, DNL ±1 LSB typical, monotonicity guaranteed to 15 bits. - **Software and OS Support:** Drivers and SDKs for Windows 7/8 (x86/x64) and Linux; compatible with LabVIEW™, MATLAB®, C/C++, Visual Basic, and Visual Studio .NET. - **CompactPCI Compliance:** 3U Eurocard form factor, PICMG 2.0 R2.1 compliant for industrial backplane systems.

Hersteller: Adlink Technology Inc.

Kategorie: D/A Intelligent PXI/cPCI

- **High-Resolution Analog Output:** 8 independent 16-bit D/A channels with ±10 V bipolar output range. - **Fast Response:** Typical settling time of 130 µs for a 20 V step and a slew rate of 26 V/µs. - **CompactPCI Interface:** Fully compliant with PICMG 2.0 R2.1 CompactPCI specification, 3U Eurocard form factor. - **Integrated Digital I/O:** 4 TTL-compatible digital input channels and 4 TTL-compatible digital output channels. - **High Accuracy:** Gain error ±0.2% maximum, differential nonlinearity (DNL) ±1 LSB typical. - **Output Drive Capability:** ±5 mA maximum per channel. - **Plug and Play Configuration:** Automatic resource assignment via PCI Plug and Play BIOS. - **Software Support:** Drivers and SDKs for Windows 7/8 (x86/x64) and Linux; compatible with LabVIEW™, MATLAB®, C/C++, Visual Basic, and Visual Studio.NET. - **Calibration and Utility Tools:** Factory-calibrated with precision DMM; includes DOS-based utility for function testing and calibration. - **Robust Design:** Industrial-grade operating temperature range (0°C to 50°C) and humidity tolerance (5–95% non-condensing).

Hersteller: Adlink Technology Inc.

Kategorie: D/A Intelligent PXI/cPCI